Re[2]: Help - ASN-GW throwing error - Validation of attributes failed

[Толик Шавловский]

Hi,

ask ASN-GW vendor if it passed IOT with FR.


15 марта 2012, 09:58 от Rathod Subhashchandra <rathod at tataelxsi.co.in>:
> Dear Fajar,
> 
> I went through the documentation of ASN-GW. I could not find configuring AAA
> parameters except AAA IP address.
> 
> I am not quite clear which attribute is causing the problem.
> For EAP-TTLS, almost same ACCESS-ACCEPT attributes are through. But for
> EAP-TLS I am facing this issue.
> 
> I am attaching the AAA wireshark logs. Please let me know your valuable
> feedback.
> 
> Thanks !
> Rathod.
> 
> 
> 
> 
> -----Original Message-----
> From: Fajar A. Nugraha [mailto:list at fajar.net] 
> Sent: Thursday, March 15, 2012 11:00 AM
> To: rathod at tataelxsi.co.in; FreeRadius users mailing list
> Subject: Re: Help - ASN-GW throwing error - Validation of attributes failed
> 
> On Thu, Mar 15, 2012 at 12:21 PM, Rathod Subhashchandra
> <rathod at tataelxsi.co.in> wrote:
> > Wireshark logs @ ASN-GW
> >
> >
> >
> >
> >
> > I could not attach wireshark pcap logs due to size constraint. I have took
> print screen of only ACCESS-ACCEPT message copied to MS word.
> 
> While that information might be interesting for ASN
> support/list/forum, this list is not it.
> 
> > What are the mandatory fields in Access-Accept and their valid values?
> >
> > Service-Type attribute value is 2. ASN-GW is adding this attribute. Is
> this valid for EAP-TLS?
> >
> > I am guessing this should be 8. I don't have control over ASN-GW
> parameters modification.
> >
> >
> >
> > Please let me know what fields are invalid in above ACCESS-ACCEPT.
> 
> Did you try asking the NAS vendor?
> 
> If you know what attributes are needed, you can configure FR to send
> it. If you don't know what they are, then you should ask the NAS
> vendor, or at least read its documentation.
> 
> -- 
> Fajar
> 
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html