FW: Radacct table not working properly
Javier Ruiz Escalante
fruiz002 at hotmail.com
Tue Mar 27 11:24:06 CEST 2012
Ok,
Look, I should have accounting information about the client (for example all
the attributes I need for disconnection) in the radacct table, right? Which
ones? The one I past belowatleast, that at the moment are going to a file in
"/var/log/freeradius/radacct"
Tue Mar 27 09:57:42 2012
Acct-Status-Type = Accounting-On
NAS-Identifier = "MikroTik"
Acct-Delay-Time = 0
NAS-IP-Address = 192.168.1.11
Acct-Unique-Session-Id = "44c5e5334885d97c"
Timestamp = 1332835062
Request-Authenticator = Verified
Tue Mar 27 10:12:10 2012
Acct-Status-Type = Accounting-On
NAS-Identifier = "MikroTik"
Acct-Delay-Time = 0
NAS-IP-Address = 192.168.1.11
Acct-Unique-Session-Id = "44c5e5334885d97c"
Timestamp = 1332835930
Request-Authenticator = Verified
Tue Mar 27 10:30:48 2012
Acct-Status-Type = Accounting-On
NAS-Identifier = "MikroTik"
Acct-Delay-Time = 0
NAS-IP-Address = 192.168.1.11
Acct-Unique-Session-Id = "44c5e5334885d97c"
Timestamp = 1332837048
Request-Authenticator = Verified
Tue Mar 27 10:57:16 2012
Acct-Status-Type = Accounting-On
NAS-Identifier = "MikroTik"
Acct-Delay-Time = 0
NAS-IP-Address = 192.168.1.11
Acct-Unique-Session-Id = "44c5e5334885d97c"
Timestamp = 1332838636
Request-Authenticator = Verified
2nd.
I have Freeradius in debug mode, and the output is attached but I can't see
where is the problem. I hope it's the information you wanted and you can
help me.
Best regards
-----Original Message-----
From: freeradius-users-bounces+fruiz002=hotmail.com at lists.freeradius.org
[mailto:freeradius-users-bounces+fruiz002=hotmail.com at lists.freeradius.org]
On Behalf Of Alan DeKok
Sent: martes, 27 de marzo de 2012 10:53
To: FreeRadius users mailing list
Subject: Re: FW: Radacct table not working properly
Javier Ruiz Escalante wrote:
> I send radius packets, (as long as I know...) I have a hotspot from
> Mikrotik and I have Radius configured, my client logs on and the
> information sent by MKT goes to a file but not to radacct table.
First, figure out exactly what's going on. "Information" is meaningless.
Do you mean RADIUS accounting packets? And "goes to a file" is also
meaningless. Which file? Why?
And, AS ALWAYS, run the server in debugging mode to see what's going on.
It's really not that hard.
Alan DeKok.
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: debugging.rtf
Type: application/msword
Size: 71984 bytes
Desc: not available
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20120327/12cc0919/attachment-0001.doc>
More information about the Freeradius-Users
mailing list