NAS Client

[Shawky Skaff]

IP tables is disabled and I can ping the NAS server bring the Radius client - Cisco 7301 successfully

Is there anything else that I can check?


-----Original Message-----
From: freeradius-users-bounces+shawkys=ivox.com.au at lists.freeradius.org [mailto:freeradius-users-bounces+shawkys=ivox.com.au at lists.freeradius.org] On Behalf Of Fajar A. Nugraha
Sent: Monday, 7 May 2012 5:21 PM
To: FreeRadius users mailing list
Subject: Re: NAS Client

On Mon, May 7, 2012 at 2:08 PM, Shawky Skaff <shawkys at ivox.com.au> wrote:
>
> I've setup a NAS client that being a cisco7301 and have entered this 
> into clients.conf. When I run radiusd -X and do the following radtest 
> eftel-test
> test123 27.34.225.253 1812 testing123, it fails, I don't get anything 
> appearing on my debug radiusd -X screen.

The usual suspect would be firewall (e.g. iptables). Try disabling it temporarily, and make sure basic connectivity (e.g. ping) works.

--
Fajar
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html