Radius Squid authentication REJECT
Iftakhul Anwar
anwar at meruvian.org
Thu Apr 11 18:06:43 CEST 2013
Hi, previously i've attached my log as attachment :)
Please let see my radiusd -X output when i try login on squid prompt
...
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating module "acct_unique" from file
/usr/local/etc/raddb/modules/acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, NAS-Identifier, NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating module "detail" from file
/usr/local/etc/raddb/modules/detail
detail {
detailfile =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Linked to module rlm_attr_filter
Module: Instantiating module "attr_filter.accounting_response" from file
/usr/local/etc/raddb/modules/attr_filter
attr_filter attr_filter.accounting_response {
attrsfile = "/usr/local/etc/raddb/attrs.accounting_response"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /usr/local/etc/raddb/attrs.accounting_response
Module: Checking session {...} for more modules to load
Module: Linked to module rlm_radutmp
Module: Instantiating module "radutmp" from file
/usr/local/etc/raddb/modules/radutmp
radutmp {
filename = "/usr/local/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Instantiating module "attr_filter.access_reject" from file
/usr/local/etc/raddb/modules/attr_filter
attr_filter attr_filter.access_reject {
attrsfile = "/usr/local/etc/raddb/attrs.access_reject"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /usr/local/etc/raddb/attrs.access_reject
} # modules
} # server
server inner-tunnel { # from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel
modules {
Module: Checking authenticate {...} for more modules to load
Module: Checking authorize {...} for more modules to load
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
server coa { # from file /usr/local/etc/raddb/sites-enabled/coa
modules {
Module: Checking recv-coa {...} for more modules to load
Module: Linked to module rlm_always
Module: Instantiating module "ok" from file
/usr/local/etc/raddb/modules/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
Module: Checking send-coa {...} for more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
listen {
type = "coa"
server = "coa"
ipaddr = *
port = 3799
}
listen {
type = "control"
listen {
socket = "/usr/local/var/run/radiusd/radiusd.sock"
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
... adding new socket proxy address * port 54492
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on coa address * port 3799 as server coa
Listening on command file /usr/local/var/run/radiusd/radiusd.sock
Listening on authentication address 127.0.0.1 port 18120 as server
inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
User-Name = "alice"
User-Password = "\335\307-\245#ˎ!7\036f\023\217\3630\257"
NAS-Port = 111
NAS-Port-Type = Async
NAS-IP-Address = 192.168.2.3
# Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "alice", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
++[files] returns noop
[sql] expand: %{User-Name} -> alice
[sql] sql_set_user escaped user --> 'alice'
rlm_sql (sql): Reserving sql socket id: 4
[sql] expand: SELECT id, username, attribute, value, op FROM
radcheck WHERE username = '%{SQL-User-Name}' ORDER BY
id -> SELECT id, username, attribute, value, op FROM radcheck
WHERE username = 'alice' ORDER BY id
[sql] User found in radcheck table
[sql] expand: SELECT id, username, attribute, value, op FROM
radreply WHERE username = '%{SQL-User-Name}' ORDER BY
id -> SELECT id, username, attribute, value, op FROM radreply
WHERE username = 'alice' ORDER BY id
[sql] expand: SELECT groupname FROM radusergroup WHERE
username = '%{SQL-User-Name}' ORDER BY priority -> SELECT
groupname FROM radusergroup WHERE username = 'alice'
ORDER BY priority
rlm_sql (sql): Released sql socket id: 4
++[sql] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns updated
Found Auth-Type = PAP
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group PAP {...}
[pap] login attempt with password "\DD\C7-\A5#\CB?!7?f??\F30\AF"
[pap] Using clear text password "password"
[pap] Passwords don't match
++[pap] returns reject
Failed to authenticate the user.
WARNING: Unprintable characters in the password. Double-check the shared
secret on the server and the NAS!
Using Post-Auth-Type REJECT
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group REJECT {...}
[attr_filter.access_reject] expand: %{User-Name} -> alice
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 0 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 0
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
Sending duplicate reply to client localprivate port 55467 - ID: 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
Sending duplicate reply to client localprivate port 55467 - ID: 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 3.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
Sending duplicate reply to client localprivate port 55467 - ID: 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 2.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
Sending duplicate reply to client localprivate port 55467 - ID: 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 1.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
Sending duplicate reply to client localprivate port 55467 - ID: 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 0.9 seconds.
Cleaning up request 0 ID 4 with timestamp +98
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
User-Name = "alice"
User-Password = "\335\307-\245#ˎ!7\036f\023\217\3630\257"
NAS-Port = 111
NAS-Port-Type = Async
NAS-IP-Address = 192.168.2.3
# Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "alice", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
++[files] returns noop
[sql] expand: %{User-Name} -> alice
[sql] sql_set_user escaped user --> 'alice'
rlm_sql (sql): Reserving sql socket id: 3
[sql] expand: SELECT id, username, attribute, value, op FROM
radcheck WHERE username = '%{SQL-User-Name}' ORDER BY
id -> SELECT id, username, attribute, value, op FROM radcheck
WHERE username = 'alice' ORDER BY id
[sql] User found in radcheck table
[sql] expand: SELECT id, username, attribute, value, op FROM
radreply WHERE username = '%{SQL-User-Name}' ORDER BY
id -> SELECT id, username, attribute, value, op FROM radreply
WHERE username = 'alice' ORDER BY id
[sql] expand: SELECT groupname FROM radusergroup WHERE
username = '%{SQL-User-Name}' ORDER BY priority -> SELECT
groupname FROM radusergroup WHERE username = 'alice'
ORDER BY priority
rlm_sql (sql): Released sql socket id: 3
++[sql] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns updated
Found Auth-Type = PAP
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group PAP {...}
[pap] login attempt with password "\DD\C7-\A5#\CB?!7?f??\F30\AF"
[pap] Using clear text password "password"
[pap] Passwords don't match
++[pap] returns reject
Failed to authenticate the user.
WARNING: Unprintable characters in the password. Double-check the shared
secret on the server and the NAS!
Using Post-Auth-Type REJECT
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group REJECT {...}
[attr_filter.access_reject] expand: %{User-Name} -> alice
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 1 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 1
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
Sending duplicate reply to client localprivate port 55467 - ID: 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
Sending duplicate reply to client localprivate port 55467 - ID: 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 3.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
Sending duplicate reply to client localprivate port 55467 - ID: 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 2.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
Sending duplicate reply to client localprivate port 55467 - ID: 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 1.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
Sending duplicate reply to client localprivate port 55467 - ID: 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 0.9 seconds.
Cleaning up request 1 ID 4 with timestamp +104
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
User-Name = "alice"
User-Password = "\335\307-\245#ˎ!7\036f\023\217\3630\257"
NAS-Port = 111
NAS-Port-Type = Async
NAS-IP-Address = 192.168.2.3
# Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "alice", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
++[files] returns noop
[sql] expand: %{User-Name} -> alice
[sql] sql_set_user escaped user --> 'alice'
rlm_sql (sql): Reserving sql socket id: 2
[sql] expand: SELECT id, username, attribute, value, op FROM
radcheck WHERE username = '%{SQL-User-Name}' ORDER BY
id -> SELECT id, username, attribute, value, op FROM radcheck
WHERE username = 'alice' ORDER BY id
[sql] User found in radcheck table
[sql] expand: SELECT id, username, attribute, value, op FROM
radreply WHERE username = '%{SQL-User-Name}' ORDER BY
id -> SELECT id, username, attribute, value, op FROM radreply
WHERE username = 'alice' ORDER BY id
[sql] expand: SELECT groupname FROM radusergroup WHERE
username = '%{SQL-User-Name}' ORDER BY priority -> SELECT
groupname FROM radusergroup WHERE username = 'alice'
ORDER BY priority
rlm_sql (sql): Released sql socket id: 2
++[sql] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns updated
Found Auth-Type = PAP
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group PAP {...}
[pap] login attempt with password "\DD\C7-\A5#\CB?!7?f??\F30\AF"
[pap] Using clear text password "password"
[pap] Passwords don't match
++[pap] returns reject
Failed to authenticate the user.
WARNING: Unprintable characters in the password. Double-check the shared
secret on the server and the NAS!
Using Post-Auth-Type REJECT
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group REJECT {...}
[attr_filter.access_reject] expand: %{User-Name} -> alice
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 2 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 2
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
Sending duplicate reply to client localprivate port 55467 - ID: 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
Sending duplicate reply to client localprivate port 55467 - ID: 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 3.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
Sending duplicate reply to client localprivate port 55467 - ID: 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 2.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
Sending duplicate reply to client localprivate port 55467 - ID: 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 1.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
Sending duplicate reply to client localprivate port 55467 - ID: 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 0.9 seconds.
Cleaning up request 2 ID 4 with timestamp +110
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
User-Name = "alice"
User-Password = "\335\307-\245#ˎ!7\036f\023\217\3630\257"
NAS-Port = 111
NAS-Port-Type = Async
NAS-IP-Address = 192.168.2.3
# Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "alice", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
++[files] returns noop
[sql] expand: %{User-Name} -> alice
[sql] sql_set_user escaped user --> 'alice'
rlm_sql (sql): Reserving sql socket id: 1
[sql] expand: SELECT id, username, attribute, value, op FROM
radcheck WHERE username = '%{SQL-User-Name}' ORDER BY
id -> SELECT id, username, attribute, value, op FROM radcheck
WHERE username = 'alice' ORDER BY id
[sql] User found in radcheck table
[sql] expand: SELECT id, username, attribute, value, op FROM
radreply WHERE username = '%{SQL-User-Name}' ORDER BY
id -> SELECT id, username, attribute, value, op FROM radreply
WHERE username = 'alice' ORDER BY id
[sql] expand: SELECT groupname FROM radusergroup WHERE
username = '%{SQL-User-Name}' ORDER BY priority -> SELECT
groupname FROM radusergroup WHERE username = 'alice'
ORDER BY priority
rlm_sql (sql): Released sql socket id: 1
++[sql] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns updated
Found Auth-Type = PAP
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group PAP {...}
[pap] login attempt with password "\DD\C7-\A5#\CB?!7?f??\F30\AF"
[pap] Using clear text password "password"
[pap] Passwords don't match
++[pap] returns reject
Failed to authenticate the user.
WARNING: Unprintable characters in the password. Double-check the shared
secret on the server and the NAS!
Using Post-Auth-Type REJECT
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group REJECT {...}
[attr_filter.access_reject] expand: %{User-Name} -> alice
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 3 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 3
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
Sending duplicate reply to client localprivate port 55467 - ID: 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
Sending duplicate reply to client localprivate port 55467 - ID: 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 3.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
Sending duplicate reply to client localprivate port 55467 - ID: 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 2.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
Sending duplicate reply to client localprivate port 55467 - ID: 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 1.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
Sending duplicate reply to client localprivate port 55467 - ID: 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 0.9 seconds.
Cleaning up request 3 ID 4 with timestamp +116
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
User-Name = "alice"
User-Password = "\335\307-\245#ˎ!7\036f\023\217\3630\257"
NAS-Port = 111
NAS-Port-Type = Async
NAS-IP-Address = 192.168.2.3
# Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "alice", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
++[files] returns noop
[sql] expand: %{User-Name} -> alice
[sql] sql_set_user escaped user --> 'alice'
rlm_sql (sql): Reserving sql socket id: 0
[sql] expand: SELECT id, username, attribute, value, op FROM
radcheck WHERE username = '%{SQL-User-Name}' ORDER BY
id -> SELECT id, username, attribute, value, op FROM radcheck
WHERE username = 'alice' ORDER BY id
[sql] User found in radcheck table
[sql] expand: SELECT id, username, attribute, value, op FROM
radreply WHERE username = '%{SQL-User-Name}' ORDER BY
id -> SELECT id, username, attribute, value, op FROM radreply
WHERE username = 'alice' ORDER BY id
[sql] expand: SELECT groupname FROM radusergroup WHERE
username = '%{SQL-User-Name}' ORDER BY priority -> SELECT
groupname FROM radusergroup WHERE username = 'alice'
ORDER BY priority
rlm_sql (sql): Released sql socket id: 0
++[sql] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns updated
Found Auth-Type = PAP
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group PAP {...}
[pap] login attempt with password "\DD\C7-\A5#\CB?!7?f??\F30\AF"
[pap] Using clear text password "password"
[pap] Passwords don't match
++[pap] returns reject
Failed to authenticate the user.
WARNING: Unprintable characters in the password. Double-check the shared
secret on the server and the NAS!
Using Post-Auth-Type REJECT
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group REJECT {...}
[attr_filter.access_reject] expand: %{User-Name} -> alice
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 4 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
Sending duplicate reply to client localprivate port 55467 - ID: 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
Sending duplicate reply to client localprivate port 55467 - ID: 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 3.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
Sending duplicate reply to client localprivate port 55467 - ID: 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 2.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
Sending duplicate reply to client localprivate port 55467 - ID: 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 1.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.3 port 55467, id=4,
length=63
Sending duplicate reply to client localprivate port 55467 - ID: 4
Sending Access-Reject of id 4 to 192.168.2.3 port 55467
Waking up in 0.9 seconds.
Cleaning up request 4 ID 4 with timestamp +122
Ready to process requests.
On Thu, Apr 11, 2013 at 11:02 PM, <A.L.M.Buxey at lboro.ac.uk> wrote:
> Hi,
>
> > Actually my shared password is default using testing123.This is my
> > configuration on my squid_rad_auth.conf
>
> as previously discussed, you are not sending full output of radiusd -X
> and so we are having to guess. we cannot guess your problems away
> at least send us your clients.conf from FreeRADIUS
>
> alan
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
--
*M.Iftakhul Anwar*
Meruvian Integrator
High Performance Computing / Cloud Computing (HPC/CC)
Office Phone : 021-93586577
Mobile Phone : 085215331477
Blog : http://blog.mervpolis.com/roller/anwar
FB : http://www.facebook.com/troya.adromeda
Website : www.meruvian.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20130411/39a74d3b/attachment-0001.html>
More information about the Freeradius-Users
mailing list