Problems wpa2-tls eap mschapv2 ldap

[Roberto Ortega Ramiro]

Hi, the changes i have done in FreeRadius configuration:

I have read than client and user files are not necesary, the others files
are:

/etc/raddb/eap.conf

##tls part
                tls {
                        certdir = ${confdir}/certs
                        cadir = ${confdir}/certs
                        private_key_password = newpassword ### (i have
change the password when i make new certificates, the .cnf files were
changed in certs folder)
                        private_key_file = ${certdir}/server.pem
                        certificate_file = ${certdir}/server.pem
                        CA_file = ${cadir}/ca.pem
                        dh_file = ${certdir}/dh
                        random_file = ${certdir}/random
                        CA_path = ${cadir}
                        cipher_list = "DEFAULT"
                      }

/etc/raddb/modules/ldap
ldap {

        server = "192.168.200.2"
        basedn = "ou=Usuarios,dc=escuelassj"
        identity = "cn=user,dc=escuelassj"
        password = passwd
        ldap_connections_number = 5
        timeout = 4
        timelimit = 3
        net_timeout = 1
        tls {
                start_tls = no
            }
        dictionary_mapping = ${confdir}/ldap.attrmap
        edir_account_policy_check = no
        keepalive {
                idle = 60
                probes = 3
                interval = 3
        }
}

/etc/raddb/sites-avaible/default

authorize {
        preprocess
        chap
        mschap
        digest
        suffix
        eap {
                ok = return
        }
        files
        ldap
        expiration
        logintime
        pap
}
authenticate {
        Auth-Type PAP {
                pap
        }
        Auth-Type CHAP {
                chap
        }
        Auth-Type MS-CHAP {
                mschap
        }
        digest
        unix
        eap
}

preacct {
        preprocess

        acct_unique
        suffix
        files
}
accounting {
        detail
        unix
        radutmp
        exec
        attr_filter.accounting_response
}



2013/5/31 Roberto Ortega Ramiro <roberto.ortega at esj.es>

> I have read many times the deployingradius.com guide, i have visit
> this site many times too.
> I'm no able to enable wpa_supplicant, but every test with radtest are
> good i have config freeradius for ldap.
>
> I attach the debbug file radiusd -X
>
> I have take the file ca.pem in the validation asistan in gnome, i'm
> using ubuntu.
>
> What is wrong? Any idea?
>
> Thank you.
>
> PD: sorry about my bad inglish, it's posible that my bad english is
> the reason becouse i'm not able to configure freeradius properly.
>
>
>
> FreeRADIUS Version 2.1.12, for host x86_64-redhat-linux-gnu, built on
> Jan  9 2013 at 05:03:12
> Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE.
> You may redistribute copies of FreeRADIUS under the terms of the
> GNU General Public License v2.
> Starting - reading configuration files ...
> including configuration file /etc/raddb/radiusd.conf
> including configuration file /etc/raddb/proxy.conf
> including configuration file /etc/raddb/clients.conf
> including files in directory /etc/raddb/modules/
> including configuration file /etc/raddb/modules/smbpasswd
> including configuration file /etc/raddb/modules/opendirectory
> including configuration file /etc/raddb/modules/ippool
> including configuration file /etc/raddb/modules/wimax
> including configuration file /etc/raddb/modules/inner-eap
> including configuration file /etc/raddb/modules/pam
> including configuration file /etc/raddb/modules/logintime
> including configuration file /etc/raddb/modules/files
> including configuration file /etc/raddb/modules/acct_unique
> including configuration file /etc/raddb/modules/redis
> including configuration file /etc/raddb/modules/unix
> including configuration file /etc/raddb/modules/attr_rewrite
> including configuration file /etc/raddb/modules/etc_group
> including configuration file /etc/raddb/modules/realm
> including configuration file /etc/raddb/modules/detail.example.com
> including configuration file /etc/raddb/modules/soh
> including configuration file /etc/raddb/modules/sradutmp
> including configuration file /etc/raddb/modules/counter
> including configuration file /etc/raddb/modules/detail
> including configuration file /etc/raddb/modules/mac2ip
> including configuration file /etc/raddb/modules/otp
> including configuration file /etc/raddb/modules/echo
> including configuration file /etc/raddb/modules/always
> including configuration file /etc/raddb/modules/sqlcounter_expire_on_login
> including configuration file /etc/raddb/modules/linelog
> including configuration file /etc/raddb/modules/passwd
> including configuration file /etc/raddb/modules/ntlm_auth
> including configuration file /etc/raddb/modules/chap
> including configuration file /etc/raddb/modules/sql_log
> including configuration file /etc/raddb/modules/ldap
> including configuration file /etc/raddb/modules/policy
> including configuration file /etc/raddb/modules/cui
> including configuration file /etc/raddb/modules/pap
> including configuration file /etc/raddb/modules/expiration
> including configuration file /etc/raddb/modules/mac2vlan
> including configuration file /etc/raddb/modules/dynamic_clients
> including configuration file /etc/raddb/modules/replicate
> including configuration file /etc/raddb/modules/expr
> including configuration file /etc/raddb/modules/checkval
> including configuration file /etc/raddb/modules/detail.log
> including configuration file /etc/raddb/modules/rediswho
> including configuration file /etc/raddb/modules/exec
> including configuration file /etc/raddb/modules/radutmp
> including configuration file /etc/raddb/modules/smsotp
> including configuration file /etc/raddb/modules/perl
> including configuration file /etc/raddb/modules/preprocess
> including configuration file /etc/raddb/modules/mschap
> including configuration file /etc/raddb/modules/attr_filter
> including configuration file /etc/raddb/modules/digest
> including configuration file /etc/raddb/eap.conf
> including configuration file /etc/raddb/policy.conf
> including files in directory /etc/raddb/sites-enabled/
> including configuration file /etc/raddb/sites-enabled/inner-tunnel
> including configuration file /etc/raddb/sites-enabled/control-socket
> including configuration file /etc/raddb/sites-enabled/default
> main {
> user = "radiusd"
> group = "radiusd"
> allow_core_dumps = no
> }
> including dictionary file /etc/raddb/dictionary
> main {
> name = "radiusd"
> prefix = "/usr"
> localstatedir = "/var"
> sbindir = "/usr/sbin"
> logdir = "/var/log/radius"
> run_dir = "/var/run/radiusd"
> libdir = "/usr/lib64/freeradius"
> radacctdir = "/var/log/radius/radacct"
> hostname_lookups = no
> max_request_time = 30
> cleanup_delay = 5
> max_requests = 1024
> pidfile = "/var/run/radiusd/radiusd.pid"
> checkrad = "/usr/sbin/checkrad"
> debug_level = 0
> proxy_requests = yes
>  log {
> stripped_names = no
> auth = no
> auth_badpass = no
> auth_goodpass = no
>  }
>  security {
> max_attributes = 200
> reject_delay = 1
> status_server = yes
>  }
> }
> radiusd: #### Loading Realms and Home Servers ####
>  proxy server {
> retry_delay = 5
> retry_count = 3
> default_fallback = no
> dead_time = 120
> wake_all_if_all_dead = no
>  }
>  home_server localhost {
> ipaddr = 127.0.0.1
> port = 1812
> type = "auth"
> secret = "testing123"
> response_window = 20
> max_outstanding = 65536
> require_message_authenticator = yes
> zombie_period = 40
> status_check = "status-server"
> ping_interval = 30
> check_interval = 30
> num_answers_to_alive = 3
> num_pings_to_alive = 3
> revive_interval = 120
> status_check_timeout = 4
>   coa {
> irt = 2
> mrt = 16
> mrc = 5
> mrd = 30
>   }
>  }
>  home_server_pool my_auth_failover {
> type = fail-over
> home_server = localhost
>  }
>  realm example.com {
> auth_pool = my_auth_failover
>  }
>  realm LOCAL {
>  }
> radiusd: #### Loading Clients ####
>  client localhost {
> ipaddr = 127.0.0.1
> require_message_authenticator = no
> secret = "testing123"
> nastype = "other"
>  }
>  client 192.168.120.0/23 {
> require_message_authenticator = no
> secret = "test"
> shortname = "private-network-2"
>  }
>  client 192.168.202.252 {
> require_message_authenticator = no
> secret = "test"
> shortname = "ldap"
>  }
> radiusd: #### Instantiating modules ####
>  instantiate {
>  Module: Linked to module rlm_exec
>  Module: Instantiating module "exec" from file /etc/raddb/modules/exec
>   exec {
> wait = no
> input_pairs = "request"
> shell_escape = yes
>   }
>  Module: Linked to module rlm_expr
>  Module: Instantiating module "expr" from file /etc/raddb/modules/expr
>  Module: Linked to module rlm_expiration
>  Module: Instantiating module "expiration" from file
> /etc/raddb/modules/expiration
>   expiration {
> reply-message = "Password Has Expired  "
>   }
>  Module: Linked to module rlm_logintime
>  Module: Instantiating module "logintime" from file
> /etc/raddb/modules/logintime
>   logintime {
> reply-message = "You are calling outside your allowed timespan  "
> minimum-timeout = 60
>   }
>  }
> radiusd: #### Loading Virtual Servers ####
> server { # from file /etc/raddb/radiusd.conf
>  modules {
>   Module: Creating Auth-Type = digest
>   Module: Creating Post-Auth-Type = REJECT
>  Module: Checking authenticate {...} for more modules to load
>  Module: Linked to module rlm_pap
>  Module: Instantiating module "pap" from file /etc/raddb/modules/pap
>   pap {
> encryption_scheme = "auto"
> auto_header = no
>   }
>  Module: Linked to module rlm_chap
>  Module: Instantiating module "chap" from file /etc/raddb/modules/chap
>  Module: Linked to module rlm_mschap
>  Module: Instantiating module "mschap" from file /etc/raddb/modules/mschap
>   mschap {
> use_mppe = yes
> require_encryption = no
> require_strong = no
> with_ntdomain_hack = no
> allow_retry = yes
>   }
>  Module: Linked to module rlm_digest
>  Module: Instantiating module "digest" from file /etc/raddb/modules/digest
>  Module: Linked to module rlm_unix
>  Module: Instantiating module "unix" from file /etc/raddb/modules/unix
>   unix {
> radwtmp = "/var/log/radius/radwtmp"
>   }
>  Module: Linked to module rlm_eap
>  Module: Instantiating module "eap" from file /etc/raddb/eap.conf
>   eap {
> default_eap_type = "md5"
> timer_expire = 60
> ignore_unknown_eap_types = no
> cisco_accounting_username_bug = no
> max_sessions = 4096
>   }
>  Module: Linked to sub-module rlm_eap_md5
>  Module: Instantiating eap-md5
>  Module: Linked to sub-module rlm_eap_leap
>  Module: Instantiating eap-leap
>  Module: Linked to sub-module rlm_eap_gtc
>  Module: Instantiating eap-gtc
>    gtc {
> challenge = "Password: "
> auth_type = "PAP"
>    }
>  Module: Linked to sub-module rlm_eap_tls
>  Module: Instantiating eap-tls
>    tls {
> rsa_key_exchange = no
> dh_key_exchange = yes
> rsa_key_length = 512
> dh_key_length = 512
> verify_depth = 0
> CA_path = "/etc/raddb/certs"
> pem_file_type = yes
> private_key_file = "/etc/raddb/certs/server.pem"
> certificate_file = "/etc/raddb/certs/server.pem"
> CA_file = "/etc/raddb/certs/ca.pem"
> private_key_password = "escuelas"
> dh_file = "/etc/raddb/certs/dh"
> random_file = "/etc/raddb/certs/random"
> fragment_size = 1024
> include_length = yes
> check_crl = no
> cipher_list = "DEFAULT"
>     cache {
> enable = no
> lifetime = 24
> max_entries = 255
>     }
>     verify {
>     }
>     ocsp {
> enable = no
> override_cert_url = yes
> url = "http://127.0.0.1/ocsp/"
>     }
>    }
>  Module: Linked to sub-module rlm_eap_ttls
>  Module: Instantiating eap-ttls
>    ttls {
> default_eap_type = "md5"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> virtual_server = "inner-tunnel"
> include_length = yes
>    }
>  Module: Linked to sub-module rlm_eap_peap
>  Module: Instantiating eap-peap
>    peap {
> default_eap_type = "mschapv2"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> proxy_tunneled_request_as_eap = yes
> virtual_server = "inner-tunnel"
> soh = no
>    }
>  Module: Linked to sub-module rlm_eap_mschapv2
>  Module: Instantiating eap-mschapv2
>    mschapv2 {
> with_ntdomain_hack = no
> send_error = no
>    }
>  Module: Checking authorize {...} for more modules to load
>  Module: Linked to module rlm_preprocess
>  Module: Instantiating module "preprocess" from file
> /etc/raddb/modules/preprocess
>   preprocess {
> huntgroups = "/etc/raddb/huntgroups"
> hints = "/etc/raddb/hints"
> with_ascend_hack = no
> ascend_channels_per_line = 23
> with_ntdomain_hack = no
> with_specialix_jetstream_hack = no
> with_cisco_vsa_hack = no
> with_alvarion_vsa_hack = no
>   }
>  Module: Linked to module rlm_realm
>  Module: Instantiating module "suffix" from file /etc/raddb/modules/realm
>   realm suffix {
> format = "suffix"
> delimiter = "@"
> ignore_default = no
> ignore_null = no
>   }
>  Module: Linked to module rlm_files
>  Module: Instantiating module "files" from file /etc/raddb/modules/files
>   files {
> usersfile = "/etc/raddb/users"
> acctusersfile = "/etc/raddb/acct_users"
> preproxy_usersfile = "/etc/raddb/preproxy_users"
> compat = "no"
>   }
>  Module: Linked to module rlm_ldap
>  Module: Instantiating module "ldap" from file /etc/raddb/modules/ldap
>   ldap {
> server = "ldap.server"
> port = 389
> password = "passwd"
> identity = "domineUSer"
> net_timeout = 1
> timeout = 4
> timelimit = 3
> tls_mode = no
> start_tls = no
> tls_require_cert = "allow"
>    tls {
> start_tls = no
> require_cert = "allow"
>    }
> basedn = "ou=Usuarios,dc=escuelassj"
> filter = "(uid=%u)"
> base_filter = "(objectclass=radiusprofile)"
> auto_header = no
> access_attr_used_for_allow = yes
> groupname_attribute = "cn"
> groupmembership_filter =
>
> "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
> dictionary_mapping = "/etc/raddb/ldap.attrmap"
> ldap_debug = 0
> ldap_connections_number = 5
> compare_check_items = no
> do_xlat = yes
> set_auth_type = yes
>    keepalive {
> interval = 3
>    }
>   }
> rlm_ldap: Registering ldap_groupcmp for Ldap-Group
> rlm_ldap: Registering ldap_xlat with xlat_name ldap
> rlm_ldap: Over-riding set_auth_type, as there is no module ldap listed
> in the "authenticate" section.
> rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap
> rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
> rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
> rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
> rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
> rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
> rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
> rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
> rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
> rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password
> rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password
> rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password
> rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header
> rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
> rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
> rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address
> rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
> rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
> rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
> rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
> rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
> rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
> rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
> rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
> rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
> rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
> rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
> rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
> rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
> rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
> rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
> rlm_ldap: LDAP radiusClass mapped to RADIUS Class
> rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
> rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
> rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
> rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
> rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
> rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
> rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS
> Framed-AppleTalk-Link
> rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS
> Framed-AppleTalk-Network
> rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS
> Framed-AppleTalk-Zone
> rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
> rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
> rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message
> rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type
> rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type
> rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS
> Tunnel-Private-Group-Id
> conns: 0x2addb70564d0
>  Module: Checking preacct {...} for more modules to load
>  Module: Linked to module rlm_acct_unique
>  Module: Instantiating module "acct_unique" from file
> /etc/raddb/modules/acct_unique
>   acct_unique {
> key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address,
> NAS-Port"
>   }
>  Module: Checking accounting {...} for more modules to load
>  Module: Linked to module rlm_detail
>  Module: Instantiating module "detail" from file /etc/raddb/modules/detail
>   detail {
> detailfile =
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> header = "%t"
> detailperm = 384
> dirperm = 493
> locking = no
> log_packet_header = no
>   }
>  Module: Linked to module rlm_radutmp
>  Module: Instantiating module "radutmp" from file
> /etc/raddb/modules/radutmp
>   radutmp {
> filename = "/var/log/radius/radutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> perm = 384
> callerid = yes
>   }
>  Module: Linked to module rlm_attr_filter
>  Module: Instantiating module "attr_filter.accounting_response" from
> file /etc/raddb/modules/attr_filter
>   attr_filter attr_filter.accounting_response {
> attrsfile = "/etc/raddb/attrs.accounting_response"
> key = "%{User-Name}"
> relaxed = no
>   }
>  Module: Checking session {...} for more modules to load
>  Module: Checking post-proxy {...} for more modules to load
>  Module: Checking post-auth {...} for more modules to load
>  Module: Instantiating module "attr_filter.access_reject" from file
> /etc/raddb/modules/attr_filter
>   attr_filter attr_filter.access_reject {
> attrsfile = "/etc/raddb/attrs.access_reject"
> key = "%{User-Name}"
> relaxed = no
>   }
>  } # modules
> } # server
> server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
>  modules {
>  Module: Checking authenticate {...} for more modules to load
>  Module: Checking authorize {...} for more modules to load
>  Module: Checking session {...} for more modules to load
>  Module: Checking post-proxy {...} for more modules to load
>  Module: Checking post-auth {...} for more modules to load
>  } # modules
> } # server
> radiusd: #### Opening IP addresses and Ports ####
> listen {
> type = "auth"
> ipaddr = *
> port = 0
> }
> listen {
> type = "acct"
> ipaddr = *
> port = 0
> }
> listen {
> type = "control"
>  listen {
> socket = "/var/run/radiusd/radiusd.sock"
>  }
> }
> listen {
> type = "auth"
> ipaddr = 127.0.0.1
> port = 18120
> }
>  ... adding new socket proxy address * port 52539
> Listening on authentication address * port 1812
> Listening on accounting address * port 1813
> Listening on command file /var/run/radiusd/radiusd.sock
> Listening on authentication address 127.0.0.1 port 18120 as server
> inner-tunnel
> Listening on proxy address * port 1814
> Ready to process requests.
> rad_recv: Access-Request packet from host 192.168.202.252 port 46850,
> id=177, length=178
> User-Name = "clemente.blanch"
> NAS-IP-Address = 192.168.202.252
> NAS-Port = 2049
> Called-Station-Id = "00-90-0B-23-2E-BF:Escuelas-Radius"
> Calling-Station-Id = "4C-ED-DE-2C-9C-B2"
> Framed-MTU = 1250
> NAS-Port-Type = Wireless-802.11
> Framed-Compression = None
> Connect-Info = "CONNECT 802.11g"
> EAP-Message = 0x0201001401636c656d656e74652e626c616e6368
> Message-Authenticator = 0x0be07d35efe547bae8a31bfa7dc9b644
> # Executing section authorize from file /etc/raddb/sites-enabled/default
> +- entering group authorize {...}
> ++[preprocess] returns ok
> ++[chap] returns noop
> ++[mschap] returns noop
> ++[digest] returns noop
> [suffix] No '@' in User-Name = "clemente.blanch", looking up realm NULL
> [suffix] No such realm "NULL"
> ++[suffix] returns noop
> [eap] EAP packet type response id 1 length 20
> [eap] No EAP Start, assuming it's an on-going EAP conversation
> ++[eap] returns updated
> ++[files] returns noop
> [ldap] performing user authorization for clemente.blanch
> [ldap] expand: (uid=%u) -> (uid=clemente.blanch)
> [ldap] expand: ou=Usuarios,dc=escuelassj -> ou=Usuarios,dc=escuelassj
>   [ldap] ldap_get_conn: Checking Id: 0
>   [ldap] ldap_get_conn: Got Id: 0
>   [ldap] attempting LDAP reconnection
>   [ldap] (re)connect to 192.168.200.208:389, authentication 0
>   [ldap] bind as cn=root,dc=escuelassj/passwd to 192.168.200.208:389
>   [ldap] waiting for bind result ...
>   [ldap] Bind was successful
>   [ldap] performing search in ou=Usuarios,dc=escuelassj, with filter
> (uid=clemente.blanch)
> [ldap] looking for check items in directory...
>   [ldap] userPassword -> Password-With-Header ==
> "{SSHA}ZUTv0zmZc619XgoJHvSJpoHV4edmdVc0"
>   [ldap] sambaNtPassword -> NT-Password ==
> 0x3130363939383944313338324335343830464532353633374646303236314138
>   [ldap] sambaLmPassword -> LM-Password ==
> 0x3836333231454630413134313242443441414433423433354235313430344545
> [ldap] looking for reply items in directory...
> [ldap] user clemente.blanch authorized to use remote access
>   [ldap] ldap_release_conn: Release Id: 0
> ++[ldap] returns ok
> ++[expiration] returns noop
> ++[logintime] returns noop
> [pap] Normalizing NT-Password from hex encoding
> [pap] Normalizing LM-Password from hex encoding
> [pap] Normalizing SSHA1-Password from base64 encoding
> [pap] WARNING: Auth-Type already set.  Not setting to PAP
> ++[pap] returns noop
> Found Auth-Type = EAP
> # Executing group from file /etc/raddb/sites-enabled/default
> +- entering group authenticate {...}
> [eap] EAP Identity
> [eap] processing type md5
> rlm_eap_md5: Issuing Challenge
> ++[eap] returns handled
> Sending Access-Challenge of id 177 to 192.168.202.252 port 46850
> EAP-Message = 0x01020016041029ef720b1fc4b5d33ad93db3b7440dd1
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0x4300b9324302bd785bc66cf0b8940050
> Finished request 0.
> Going to the next request
> Waking up in 4.9 seconds.
> rad_recv: Access-Request packet from host 192.168.202.252 port 46850,
> id=178, length=182
> User-Name = "clemente.blanch"
> NAS-IP-Address = 192.168.202.252
> NAS-Port = 2049
> Called-Station-Id = "00-90-0B-23-2E-BF:Escuelas-Radius"
> Calling-Station-Id = "4C-ED-DE-2C-9C-B2"
> Framed-MTU = 1250
> NAS-Port-Type = Wireless-802.11
> Framed-Compression = None
> Connect-Info = "CONNECT 802.11g"
> EAP-Message = 0x020200060315
> State = 0x4300b9324302bd785bc66cf0b8940050
> Message-Authenticator = 0x85b25270b6ad4a02c4a441365de04f9b
> # Executing section authorize from file /etc/raddb/sites-enabled/default
> +- entering group authorize {...}
> ++[preprocess] returns ok
> ++[chap] returns noop
> ++[mschap] returns noop
> ++[digest] returns noop
> [suffix] No '@' in User-Name = "clemente.blanch", looking up realm NULL
> [suffix] No such realm "NULL"
> ++[suffix] returns noop
> [eap] EAP packet type response id 2 length 6
> [eap] No EAP Start, assuming it's an on-going EAP conversation
> ++[eap] returns updated
> ++[files] returns noop
> [ldap] performing user authorization for clemente.blanch
> [ldap] expand: (uid=%u) -> (uid=clemente.blanch)
> [ldap] expand: ou=Usuarios,dc=escuelassj -> ou=Usuarios,dc=escuelassj
>   [ldap] ldap_get_conn: Checking Id: 0
>   [ldap] ldap_get_conn: Got Id: 0
>   [ldap] performing search in ou=Usuarios,dc=escuelassj, with filter
> (uid=clemente.blanch)
> [ldap] looking for check items in directory...
>   [ldap] userPassword -> Password-With-Header ==
> "{SSHA}ZUTv0zmZc619XgoJHvSJpoHV4edmdVc0"
>   [ldap] sambaNtPassword -> NT-Password ==
> 0x3130363939383944313338324335343830464532353633374646303236314138
>   [ldap] sambaLmPassword -> LM-Password ==
> 0x3836333231454630413134313242443441414433423433354235313430344545
> [ldap] looking for reply items in directory...
> [ldap] user clemente.blanch authorized to use remote access
>   [ldap] ldap_release_conn: Release Id: 0
> ++[ldap] returns ok
> ++[expiration] returns noop
> ++[logintime] returns noop
> [pap] Normalizing NT-Password from hex encoding
> [pap] Normalizing LM-Password from hex encoding
> [pap] Normalizing SSHA1-Password from base64 encoding
> [pap] WARNING: Auth-Type already set.  Not setting to PAP
> ++[pap] returns noop
> Found Auth-Type = EAP
> # Executing group from file /etc/raddb/sites-enabled/default
> +- entering group authenticate {...}
> [eap] Request found, released from the list
> [eap] EAP NAK
> [eap] EAP-NAK asked for EAP-Type/ttls
> [eap] processing type tls
> [tls] Initiate
> [tls] Start returned 1
> ++[eap] returns handled
> Sending Access-Challenge of id 178 to 192.168.202.252 port 46850
> EAP-Message = 0x010300061520
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0x4300b9324203ac785bc66cf0b8940050
> Finished request 1.
> Going to the next request
> Waking up in 4.9 seconds.
> rad_recv: Access-Request packet from host 192.168.202.252 port 46850,
> id=179, length=403
> User-Name = "clemente.blanch"
> NAS-IP-Address = 192.168.202.252
> NAS-Port = 2049
> Called-Station-Id = "00-90-0B-23-2E-BF:Escuelas-Radius"
> Calling-Station-Id = "4C-ED-DE-2C-9C-B2"
> Framed-MTU = 1250
> NAS-Port-Type = Wireless-802.11
> Framed-Compression = None
> Connect-Info = "CONNECT 802.11g"
> EAP-Message =
> 0x020300e3150016030100d8010000d4030151a7502728b223adfd9d1576a726a7311af75bde6d41eb7f51784e34c0cbadf0000066c014c00ac022c0210039003800880087c00fc00500350084c012c008c01cc01b00160013c00dc003000ac013c009c01fc01e00330032009a009900450044c00ec004002f00960041c011c007c00cc002000500040015001200090014001100080006000300ff01000045000b000403000102000a00340032000e000d0019000b000c00180009000a00160017000800060007001400150004000500120013000100020003000f00100011000f000101
> State = 0x4300b9324203ac785bc66cf0b8940050
> Message-Authenticator = 0xd439255984d72e6b31e8784decf1ff44
> # Executing section authorize from file /etc/raddb/sites-enabled/default
> +- entering group authorize {...}
> ++[preprocess] returns ok
> ++[chap] returns noop
> ++[mschap] returns noop
> ++[digest] returns noop
> [suffix] No '@' in User-Name = "clemente.blanch", looking up realm NULL
> [suffix] No such realm "NULL"
> ++[suffix] returns noop
> [eap] EAP packet type response id 3 length 227
> [eap] Continuing tunnel setup.
> ++[eap] returns ok
> Found Auth-Type = EAP
> # Executing group from file /etc/raddb/sites-enabled/default
> +- entering group authenticate {...}
> [eap] Request found, released from the list
> [eap] EAP/ttls
> [eap] processing type ttls
> [ttls] Authenticate
> [ttls] processing EAP-TLS
> [ttls] eaptls_verify returned 7
> [ttls] Done initial handshake
> [ttls]     (other): before/accept initialization
> [ttls]     TLS_accept: before/accept initialization
> [ttls] <<< TLS 1.0 Handshake [length 00d8], ClientHello
> [ttls]     TLS_accept: SSLv3 read client hello A
> [ttls] >>> TLS 1.0 Handshake [length 0031], ServerHello
> [ttls]     TLS_accept: SSLv3 write server hello A
> [ttls] >>> TLS 1.0 Handshake [length 0855], Certificate
> [ttls]     TLS_accept: SSLv3 write certificate A
> [ttls] >>> TLS 1.0 Handshake [length 020d], ServerKeyExchange
> [ttls]     TLS_accept: SSLv3 write key exchange A
> [ttls] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
> [ttls]     TLS_accept: SSLv3 write server done A
> [ttls]     TLS_accept: SSLv3 flush data
> [ttls]     TLS_accept: Need to read more data: SSLv3 read client
> certificate A
> In SSL Handshake Phase
> In SSL Accept mode
> [ttls] eaptls_process returned 13
> ++[eap] returns handled
> Sending Access-Challenge of id 179 to 192.168.202.252 port 46850
> EAP-Message =
> 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
> EAP-Message =
> 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
> EAP-Message =
> 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
> EAP-Message =
> 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
> EAP-Message = 0xa5308204a130820389a00302
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0x4300b9324104ac785bc66cf0b8940050
> Finished request 2.
> Going to the next request
> Waking up in 4.9 seconds.
> rad_recv: Access-Request packet from host 192.168.202.252 port 46850,
> id=180, length=182
> User-Name = "clemente.blanch"
> NAS-IP-Address = 192.168.202.252
> NAS-Port = 2049
> Called-Station-Id = "00-90-0B-23-2E-BF:Escuelas-Radius"
> Calling-Station-Id = "4C-ED-DE-2C-9C-B2"
> Framed-MTU = 1250
> NAS-Port-Type = Wireless-802.11
> Framed-Compression = None
> Connect-Info = "CONNECT 802.11g"
> EAP-Message = 0x020400061500
> State = 0x4300b9324104ac785bc66cf0b8940050
> Message-Authenticator = 0xe55d4634e860825f7eed8857971a2223
> # Executing section authorize from file /etc/raddb/sites-enabled/default
> +- entering group authorize {...}
> ++[preprocess] returns ok
> ++[chap] returns noop
> ++[mschap] returns noop
> ++[digest] returns noop
> [suffix] No '@' in User-Name = "clemente.blanch", looking up realm NULL
> [suffix] No such realm "NULL"
> ++[suffix] returns noop
> [eap] EAP packet type response id 4 length 6
> [eap] Continuing tunnel setup.
> ++[eap] returns ok
> Found Auth-Type = EAP
> # Executing group from file /etc/raddb/sites-enabled/default
> +- entering group authenticate {...}/
> [eap] Request found, released from the list
> [eap] EAP/ttls
> [eap] processing type ttls
> [ttls] Authenticate
> [ttls] processing EAP-TLS
> [ttls] Received TLS ACK
> [ttls] ACK handshake fragment handler
> [ttls] eaptls_verify returned 1
> [ttls] eaptls_process returned 13
> ++[eap] returns handled
> Sending Access-Challenge of id 180 to 192.168.202.252 port 46850
> EAP-Message =
> 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
> EAP-Message =
> 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
> EAP-Message =
> 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
> EAP-Message =
> 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
> EAP-Message = 0x83f82d312c7744ab946edc5e
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0x4300b9324005ac785bc66cf0b8940050
> Finished request 3.
>
> --
> --
> Un saludo.
> ____________________
>
> Roberto Ortega
>



-- 
Un saludo.
____________________

Roberto Ortega
Profesor de Informática.
http://www.proyectoret.es

Escuelas San José Valencia
Avd.Cortes Valencianas nº1
46015 Valencia
R4600489A
Tf:963499011 ext. 262
Fax:963488835
http://www.escuelassj.com

No imprimas este correo si no es necesario. Protejamos el medio ambiente.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20130603/83471e94/attachment-0001.html>