Calling-Station-Id Not Getting Updated in radacct table

[Cholleti, Hanumantha]

Thanks a lot Alan, that fixed the issue :-)...

We tried this option before, but only tested with radclient and it doesn't update the calling-station-id.
Here is the command we used:
radclient 10.25.37.61 auto HANU -f acct_start_test1.txt

The 'acct_start_test1.txt' file as the following lines:
Packet-Type=4
Packet-Dst-Port=1813
Acct-Session-Id = "4D2BB8AC-00000098"
Acct-Status-Type = Start
Acct-Authentic = RADIUS
User-Name = "Release2-build11 at viasat-oss"
User-Password = "password"
NAS-Port = 100
Called-Station-Id = "00-02-6F-AA-AA-AA:My Wireless"
Calling-Station-Id = "\000\240\274/\370\260"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 48Mbps 802.11b"

This time tested with the actual NAS with real UT, and it works great. :-)

Thanks again
-Hanu

-----Original Message-----
From: freeradius-users-bounces+hanumantha.cholleti=viasat.com at lists.freeradius.org [mailto:freeradius-users-bounces+hanumantha.cholleti=viasat.com at lists.freeradius.org] On Behalf Of Alan DeKok
Sent: Thursday, June 13, 2013 12:30 PM
To: FreeRadius users mailing list
Subject: Re: Calling-Station-Id Not Getting Updated in radacct table


On 2013-06-13, at 2:37 PM, "Cholleti, Hanumantha" <Hanumantha.Cholleti at viasat.com> wrote:
> Similar to the above wimax configuration for authorize section, do we need to enable any setting for accounting to fix the Calling-Station-Id attribute that will populate the radacct correctly as string?

  List "wimax" in the "preacct" section. It will fix the attribute there, too.

  Alan DeKok.
-
List info/subscribe/unsubscribe? See https://urldefense.proofpoint.com/v1/url?u=http://www.freeradius.org/list/users.html&k=OWT%2FB14AE7ysJN06F7d2nQ%3D%3D%0A&r=RbstrbGHTDEX5Lhn9%2F%2FI6NK56FT6UXWy%2BZ7zzvTZGx0%3D%0A&m=h7466jNJ7JhWxGNz%2F6LQfMg7WMTuyeE87ZTOken%2Fsfc%3D%0A&s=e956bd3d2375f80f132368b8bf087352e4d7bd705ebd5cdcd54ba5b78ff4a742