initial accept, but then fails

[geebs]

On Fri, Jun 14, 2013 at 3:33 PM, Iliya Peregoudov <iperegudov at cboss.ru>wrote:

> On 14.06.2013 5:56, geebs wrote:
>
>> rad_recv: Access-Request packet from host 10.8.13.254 port 1645, id=6,
>> length=220
>>          User-Name = "example.com <http://example.com>"
>>
>>          User-Password = "cisco"
>>          Calling-Station-Id = "GigabitEthernet
>> 14/0/3.31010096:3101-96#**587204450###pppoe 00:04:ed:d1:78:85#QTNITE4025M
>> atm 1/1/04/27:8.35#"
>>          Connect-Info = "1000000000"
>>          NAS-Port-Type = Virtual
>>          NAS-Port = 501
>>          NAS-Port-Id = "Uniq-Sess-ID501"
>>          Service-Type = Outbound-User
>>          NAS-IP-Address = 10.8.13.254
>>
>
> Looks line Cisco PPPoE service profile request
> http://www.cisco.com/en/US/**docs/ios-xml/ios/bbdsl/**
> configuration/12-4t/bba-svc-**callstup.html<http://www.cisco.com/en/US/docs/ios-xml/ios/bbdsl/configuration/12-4t/bba-svc-callstup.html>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/**
> list/users.html <http://www.freeradius.org/list/users.html>



Yes it is, I'm not sure what's going on there, but to be honest this is not
the major issue.

The problem is that michaelr at example.com does initially connect, but then
gets disconnected...

If you have a look at the 1st post, they connect fine, but then get booted,
and the only thing in the logs is the above.
What would cause this ?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20130616/4e83572a/attachment.html>