Log auth message

[BALSIANOK, Peter]

Alan,

My mistake. I didnt give you exact information. 

I used test request ( in both cases ):
NAS-Identifier = "ggsn-01-bb2.orange.sk"
User-Name = "gre at test.sk"
User-Password = "tojejedno"
NAS-IP-Address = 213.151.211.225
NAS-Port-Type = Virtual
Called-Station-Id = "GRETEST01BB2.VPS"
Calling-Station-Id = "421995222222"
Service-Type = Framed-User
Framed-Protocol = GPRS-PDP-Context
Acct-Session-Id = "d597d9250ac7aeba"
Acct-Multi-Session-Id = "d597d92505600f87"

For testing i used this freeradius version:
radiusd: FreeRADIUS Version 3.0.0, for host x86_64-unknown-linux-gnu, built on May 16 2013 at 19:51:06
Copyright (C) 1999-2013 The FreeRADIUS server project and contributors.
...

Configuration ( for logging in radiusd.conf ):
Log {
        destination = files
        file = /app_log/radius/radius.log
        auth = yes
        auth_badpass = yes
        auth_goodpass = yes
}

Difference between cases are runtime parameters:
1. /storage/app/radius/freeradius-3.0.0/sbin/radiusd -d /storage/app/radius/raddb/auth
2. /storage/app/radius/freeradius-3.0.0/sbin/radiusd -x -d /storage/app/radius/raddb/auth

In case 1. :
When i sent test request 
radiusd at tdrad1test:/storage/app/radius/test$ ./run-auth.sh gre/auth1.req 1
Sending Access-Request of id 87 to 127.0.0.1 port 1812
	NAS-Identifier = "ggsn-01-bb2.orange.sk"
	User-Name = "gre at test.sk"
	User-Password = "tojejedno"
	NAS-IP-Address = 213.151.211.225
	NAS-Port-Type = Virtual
	Called-Station-Id = "GRETEST01BB2.VPS"
	Calling-Station-Id = "421995222222"
	Service-Type = Framed-User
	Framed-Protocol = GPRS-PDP-Context
	Acct-Session-Id = "d597d9250ac7aeba"
	Acct-Multi-Session-Id = "d597d92505600f87"
rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=87, length=44
	Framed-Protocol = PPP
	Service-Type = Framed-User
	Framed-IP-Address = 10.10.10.1
	Framed-IP-Netmask = 255.255.255.255

	   Total approved auths:  1
	     Total denied auths:  0
	       Total lost auths:  0
Test result: [  OK  ]

I will not see any auth log message in the main radius log file /app_log/radius/radius.log ( somethink like ):
Tue Jun 18 08:12:55 2013 : Auth: Login OK: [gre at test.sk/tojejedno] (from client IPSECgtw-01-BB1 port 997 cli 421995222222) 

In case 2. Is no problem of course.

Thx.

-----Original Message-----
From: freeradius-users-bounces+peter.balsianok=orange.sk at lists.freeradius.org [mailto:freeradius-users-bounces+peter.balsianok=orange.sk at lists.freeradius.org] On Behalf Of Alan DeKok
Sent: Monday, June 17, 2013 4:37 PM
To: FreeRadius users mailing list
Subject: Re: Log auth message

BALSIANOK, Peter wrote:
> Is it OK, when i don`t see any log message for authetification process 
> ( when i run radiusd only with parameter –d ) ?

 Yes.

> Log output:
> 
> Mon Jun 17 14:01:55 2013 : Info: Loaded virtual server <default> Mon 
> Jun 17 14:01:55 2013 : Info: Loaded virtual server default Mon Jun 17 
> 14:01:55 2013 : Info: Ready to process requests.
>
> No log messages for authentification process

  You do realize that the server logs packets it receives, right?

  And if it receives no packets, it doesn't log anything?

> When i add parameter –x  ( in command line ), i will see log 
> message(s) marked ###

  Running it as "radiusd -X" is only suggested in the FAQ, "man" page, web pages, and daily on this list.  But why would you do that?

  Follow the documentation.  it's not hard.

  Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html