Repeating same TLV in a given VSA Issue

[Cholleti, Hanumantha]

Hi Alan,

Thanks a lot for the quick response and putting in the fix under 2.x.x branch.

We configured the FreeRadius using this new 2.x.x branch from git; 

The length of the AVP comes correct, but the 2nd classifier is showing in a separate AVP.

Here is the packet capture (2.x.x git branch):
        AVP: l=125  t=Vendor-Specific(26) v=WiMAX(24757)
            VSA: l=119 t=WiMAX-Packet-Flow-Descriptor(28) C=0x00: 
                TLV: l=4  t=WiMAX-Packet-Data-Flow-Id(1): 111
                    WiMAX-Packet-Data-Flow-Id: 111
                TLV: l=4  t=WiMAX-Service-Data-Flow-Id(2): 101
                    WiMAX-Service-Data-Flow-Id: 101
                TLV: l=3  t=WiMAX-Direction(4): Uplink(1)
                    WiMAX-Direction: Uplink (1)
                TLV: l=3  t=WiMAX-Activation-Trigger(5): 4
                    WiMAX-Activation-Trigger: 4
                TLV: l=3  t=WiMAX-Transport-Type(6): IPv4-CS(1)
                    WiMAX-Transport-Type: IPv4-CS (1)
                TLV: l=3  t=WiMAX-Uplink-QOS-Id(7): 111
                    WiMAX-Uplink-QOS-Id: 111
                TLV: l=46  t=WiMAX-Uplink-Classifier(9): permit in ip src any dst any 0-66 priority 3
                    WiMAX-Uplink-Classifier: permit in ip src any dst any 0-66 priority 3
                [TLV too short: length 0 < 2]
        AVP: l=59  t=Vendor-Specific(26) v=WiMAX(24757)
            VSA: l=53 t=WiMAX-Packet-Flow-Descriptor(28) C=0x00: 1 TLV(s) inside
                TLV: l=50  t=WiMAX-Uplink-Classifier(9): permit in ip src any dst any 69-65535 priority 3
                    WiMAX-Uplink-Classifier: permit in ip src any dst any 69-65535 priority 3 

Alan DeKok wrote:
> It's a minor bug in v2.2.0.  I've pushed a fix to the v2.x.x branch from "git".  It will go into the 2.2.1 release.

Thanks
-Hanu