radius user account authentication.

[cisco steps]

Hello,

I configured a user on radius server I copied the same config that every
user have. but still when the user try to authenticate he/she in this
case(dfrank)  gets % *Authentication failed.* bbob has the same config and
able to authenticate to cisco devices. the cisco device is pointing to the
same radius. Can you please help.
**
**
cd /usr/local/etc/raddb
==============================
kcorp-radius# radiusd -x
Starting - reading configuration files ...
Module: Loaded System
Module: Instantiated unix (unix)
Module: Loaded preprocess
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
Module: Instantiated realm (suffix)
Module: Loaded files
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
Module: Instantiated detail (detail)
Module: Loaded radutmp
Module: Instantiated radutmp (radutmp)
auth bind: Address already in use
  There appears to be another RADIUS server already running on the
authentication port UDP 1645.
============================================================================================
kcorp-radius # radiusd -v
radiusd: FreeRADIUS Version 0.8, for host sparc-sun-solaris2.7, built on
Dec 10 2002 at 10:54:28
=============================================================================================
dfrank Service-Type == Framed-User
        Bay-User-Level = 2,
        Cisco-AVPair = "shell:priv-lvl=15",
        Fall-Through = No
bbob Service-Type == Framed-User
        Bay-User-Level = 2,
        Cisco-AVPair = "shell:priv-lvl=15",
        Fall-Through = No
=============================================================================================
ps –ef|grep radiusd
===============================================================
radtest dfrank df2121 localhost 0 testing123
====================================================================
kcorp-radius # radtest dfrank df2121 localhost 0 testing123

Sending Access-Request of id 17 to 127.0.0.1 port 1812
        User-Name = "dfrank"
        User-Password = "df2121"
        NAS-IP-Address = 255.255.255.255
        NAS-Port = 0

Re-sending Access-Request of id 17 to 127.0.0.1 port 1812
        User-Name = "dfrank"
        User-Password = "2121"
        NAS-IP-Address = 255.255.255.255
        NAS-Port = 0
**
**
*Thanks*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20131028/066152ba/attachment-0001.html>