Get errors with radtest on ip address

[Patricia Julien]

I've done the following to install and test freeradius on Scientific Linux el6_4.  The server is one I use for testing and also has Splunk installed on it.  No issues with Splunk and the ip address have been found as I've gotten logs from other test equipment into Splunk


- I installed the freeradius-2.1.12-4.el6_3.x86_64 and then the utilities freeradius-utils-2.1.12-4.el6_3.x86_64.rpm to get the client (radtest).  

- I made a change to the users file to add the testing Cleartext-Password := "password".  My hosts file indicates both lo and the ip address for the server.  I can ping the server without issues.  

- After I added the line to the users file, I started radiusd -X >debug.txt   I then opened another terminal window on the same server and performed the - radtest testing password 127.0.0.1 0 testing123.  

- I received an error indicating failed to find ip address for linux-mail.amber.net followed by nothing to do.  

- I looked at clients.conf and change the ip address from 127.0.0.1 to my ip address and added hostname.  The results remained the same so I've reverted to original config for this.

Each time I made any changes I restarted radiusd by killing the process and restarting.  I could not service radiusd stop or radiusd stop to stop the application.  I tried pasting the debug txt into the debug form on the other site and received a 405Forbidden when I accepted the policy.


I've put my debug from testing with just the change to the users file below.  Would appreciate any insight into what could be wrong.

PJ


##### Debug text ##########


FreeRADIUS Version 2.1.12, for host x86_64-redhat-linux-gnu, built on Oct  2 2012 at 23:16:43
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. 
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A 
PARTICULAR PURPOSE. 
You may redistribute copies of FreeRADIUS under the terms of the 
GNU General Public License v2. 
Starting - reading configuration files ...
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/modules/
including configuration file /etc/raddb/modules/counter
including configuration file /etc/raddb/modules/checkval
including configuration file /etc/raddb/modules/expr
including configuration file /etc/raddb/modules/logintime
including configuration file /etc/raddb/modules/redis
including configuration file /etc/raddb/modules/mschap
including configuration file /etc/raddb/modules/wimax
including configuration file /etc/raddb/modules/attr_rewrite
including configuration file /etc/raddb/modules/replicate
including configuration file /etc/raddb/modules/sql_log
including configuration file /etc/raddb/modules/etc_group
including configuration file /etc/raddb/modules/smbpasswd
including configuration file /etc/raddb/modules/detail.log
including configuration file /etc/raddb/modules/exec
including configuration file /etc/raddb/modules/sradutmp
including configuration file /etc/raddb/modules/pap
including configuration file /etc/raddb/modules/expiration
including configuration file /etc/raddb/modules/always
including configuration file /etc/raddb/modules/preprocess
including configuration file /etc/raddb/modules/echo
including configuration file /etc/raddb/modules/policy
including configuration file /etc/raddb/modules/opendirectory
including configuration file /etc/raddb/modules/perl
including configuration file /etc/raddb/modules/pam
including configuration file /etc/raddb/modules/attr_filter
including configuration file /etc/raddb/modules/chap
including configuration file /etc/raddb/modules/detail
including configuration file /etc/raddb/modules/radutmp
including configuration file /etc/raddb/modules/ntlm_auth
including configuration file /etc/raddb/modules/inner-eap
including configuration file /etc/raddb/modules/soh
including configuration file /etc/raddb/modules/passwd
including configuration file /etc/raddb/modules/acct_unique
including configuration file /etc/raddb/modules/dynamic_clients
including configuration file /etc/raddb/modules/ippool
including configuration file /etc/raddb/modules/digest
including configuration file /etc/raddb/modules/rediswho
including configuration file /etc/raddb/modules/mac2ip
including configuration file /etc/raddb/modules/otp
including configuration file /etc/raddb/modules/cui
including configuration file /etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /etc/raddb/modules/smsotp
including configuration file /etc/raddb/modules/unix
including configuration file /etc/raddb/modules/mac2vlan
including configuration file /etc/raddb/modules/files
including configuration file /etc/raddb/modules/detail.example.com
including configuration file /etc/raddb/modules/realm
including configuration file /etc/raddb/modules/linelog
including configuration file /etc/raddb/eap.conf
including configuration file /etc/raddb/policy.conf
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/control-socket
including configuration file /etc/raddb/sites-enabled/inner-tunnel
including configuration file /etc/raddb/sites-enabled/default
main {
    user = "radiusd"
    group = "radiusd"
    allow_core_dumps = no
}
including dictionary file /etc/raddb/dictionary
main {
    name = "radiusd"
    prefix = "/usr"
    localstatedir = "/var"
    sbindir = "/usr/sbin"
    logdir = "/var/log/radius"
    run_dir = "/var/run/radiusd"
    libdir = "/usr/lib64/freeradius"
    radacctdir = "/var/log/radius/radacct"
    hostname_lookups = no
    max_request_time = 30
    cleanup_delay = 5
    max_requests = 1024
    pidfile = "/var/run/radiusd/radiusd.pid"
    checkrad = "/usr/sbin/checkrad"
    debug_level = 0
    proxy_requests = yes
 log {
    stripped_names = no
    auth = no
    auth_badpass = no
    auth_goodpass = no
 }
 security {
    max_attributes = 200
    reject_delay = 1
    status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
    retry_delay = 5
    retry_count = 3
    default_fallback = no
    dead_time = 120
    wake_all_if_all_dead = no
 }
 home_server localhost {
    ipaddr = 127.0.0.1
    port = 1812
    type = "auth"
    secret = "testing123"
    response_window = 20
    max_outstanding = 65536
    require_message_authenticator = yes
    zombie_period = 40
    status_check = "status-server"
    ping_interval = 30
    check_interval = 30
    num_answers_to_alive = 3
    num_pings_to_alive = 3
    revive_interval = 120
    status_check_timeout = 4
  coa {
    irt = 2
    mrt = 16
    mrc = 5
    mrd = 30
  }
 }
 home_server_pool my_auth_failover {
    type = fail-over
    home_server = localhost
 }
 realm example.com {
    auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
    ipaddr = 127.0.0.1
    require_message_authenticator = no
    secret = "testing123"
    nastype = "other"
 }
radiusd: #### Instantiating modules ####
 instantiate {
 Module: Linked to module rlm_exec
 Module: Instantiating module "exec" from file /etc/raddb/modules/exec
  exec {
    wait = no
    input_pairs = "request"
    shell_escape = yes
  }
 Module: Linked to module rlm_expr
 Module: Instantiating module "expr" from file /etc/raddb/modules/expr
 Module: Linked to module rlm_expiration
 Module: Instantiating module "expiration" from file /etc/raddb/modules/expiration
  expiration {
    reply-message = "Password Has Expired  "
  }
 Module: Linked to module rlm_logintime
 Module: Instantiating module "logintime" from file /etc/raddb/modules/logintime
  logintime {
    reply-message = "You are calling outside your allowed timespan  "
    minimum-timeout = 60
  }
 }
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
 modules {
  Module: Creating Auth-Type = digest
  Module: Creating Post-Auth-Type = REJECT
 Module: Checking authenticate {...} for more modules to load
 Module: Linked to module rlm_pap
 Module: Instantiating module "pap" from file /etc/raddb/modules/pap
  pap {
    encryption_scheme = "auto"
    auto_header = no
  }
 Module: Linked to module rlm_chap
 Module: Instantiating module "chap" from file /etc/raddb/modules/chap
 Module: Linked to module rlm_mschap
 Module: Instantiating module "mschap" from file /etc/raddb/modules/mschap
  mschap {
    use_mppe = yes
    require_encryption = no
    require_strong = no
    with_ntdomain_hack = no
    allow_retry = yes
  }
 Module: Linked to module rlm_digest
 Module: Instantiating module "digest" from file /etc/raddb/modules/digest
 Module: Linked to module rlm_unix
 Module: Instantiating module "unix" from file /etc/raddb/modules/unix
  unix {
    radwtmp = "/var/log/radius/radwtmp"
  }
 Module: Linked to module rlm_eap
 Module: Instantiating module "eap" from file /etc/raddb/eap.conf
  eap {
    default_eap_type = "md5"
    timer_expire = 60
    ignore_unknown_eap_types = no
    cisco_accounting_username_bug = no
    max_sessions = 4096
  }
 Module: Linked to sub-module rlm_eap_md5
 Module: Instantiating eap-md5
 Module: Linked to sub-module rlm_eap_leap
 Module: Instantiating eap-leap
 Module: Linked to sub-module rlm_eap_gtc
 Module: Instantiating eap-gtc
   gtc {
    challenge = "Password: "
    auth_type = "PAP"
   }
 Module: Linked to sub-module rlm_eap_tls
 Module: Instantiating eap-tls
   tls {
    rsa_key_exchange = no
    dh_key_exchange = yes
    rsa_key_length = 512
    dh_key_length = 512
    verify_depth = 0
    CA_path = "/etc/raddb/certs"
    pem_file_type = yes
    private_key_file = "/etc/raddb/certs/server.pem"
    certificate_file = "/etc/raddb/certs/server.pem"
    CA_file = "/etc/raddb/certs/ca.pem"
    private_key_password = "whatever"
    dh_file = "/etc/raddb/certs/dh"
    random_file = "/etc/raddb/certs/random"
    fragment_size = 1024
    include_length = yes
    check_crl = no
    cipher_list = "DEFAULT"
    cache {
    enable = no
    lifetime = 24
    max_entries = 255
    }
    verify {
    }
    ocsp {
    enable = no
    override_cert_url = yes
    url = "http://127.0.0.1/ocsp/"
    }
   }
 Module: Linked to sub-module rlm_eap_ttls
 Module: Instantiating eap-ttls
   ttls {
    default_eap_type = "md5"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    virtual_server = "inner-tunnel"
    include_length = yes
   }
 Module: Linked to sub-module rlm_eap_peap
 Module: Instantiating eap-peap
   peap {
    default_eap_type = "mschapv2"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    proxy_tunneled_request_as_eap = yes
    virtual_server = "inner-tunnel"
    soh = no
   }
 Module: Linked to sub-module rlm_eap_mschapv2
 Module: Instantiating eap-mschapv2
   mschapv2 {
    with_ntdomain_hack = no
    send_error = no
   }
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_preprocess
 Module: Instantiating module "preprocess" from file /etc/raddb/modules/preprocess
  preprocess {
    huntgroups = "/etc/raddb/huntgroups"
    hints = "/etc/raddb/hints"
    with_ascend_hack = no
    ascend_channels_per_line = 23
    with_ntdomain_hack = no
    with_specialix_jetstream_hack = no
    with_cisco_vsa_hack = no
    with_alvarion_vsa_hack = no
  }
 Module: Linked to module rlm_realm
 Module: Instantiating module "suffix" from file /etc/raddb/modules/realm
  realm suffix {
    format = "suffix"
    delimiter = "@"
    ignore_default = no
    ignore_null = no
  }
 Module: Linked to module rlm_files
 Module: Instantiating module "files" from file /etc/raddb/modules/files
  files {
    usersfile = "/etc/raddb/users"
    acctusersfile = "/etc/raddb/acct_users"
    preproxy_usersfile = "/etc/raddb/preproxy_users"
    compat = "no"
  }
 Module: Checking preacct {...} for more modules to load
 Module: Linked to module rlm_acct_unique
 Module: Instantiating module "acct_unique" from file /etc/raddb/modules/acct_unique
  acct_unique {
    key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
  }
 Module: Checking accounting {...} for more modules to load
 Module: Linked to module rlm_detail
 Module: Instantiating module "detail" from file /etc/raddb/modules/detail
  detail {
    detailfile = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
    header = "%t"
    detailperm = 384
    dirperm = 493
    locking = no
    log_packet_header = no
  }
 Module: Linked to module rlm_radutmp
 Module: Instantiating module "radutmp" from file /etc/raddb/modules/radutmp
  radutmp {
    filename = "/var/log/radius/radutmp"
    username = "%{User-Name}"
    case_sensitive = yes
    check_with_nas = yes
    perm = 384
    callerid = yes
  }
 Module: Linked to module rlm_attr_filter
 Module: Instantiating module "attr_filter.accounting_response" from file /etc/raddb/modules/attr_filter
  attr_filter attr_filter.accounting_response {
    attrsfile = "/etc/raddb/attrs.accounting_response"
    key = "%{User-Name}"
    relaxed = no
  }
 Module: Checking session {...} for more modules to load
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 Module: Instantiating module "attr_filter.access_reject" from file /etc/raddb/modules/attr_filter
  attr_filter attr_filter.access_reject {
    attrsfile = "/etc/raddb/attrs.access_reject"
    key = "%{User-Name}"
    relaxed = no
  }
 } # modules
} # server
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Checking authorize {...} for more modules to load
 Module: Checking session {...} for more modules to load
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 } # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
    type = "auth"
    ipaddr = *
    port = 0
}
listen {
    type = "acct"
    ipaddr = *
    port = 0
}
listen {
    type = "control"
 listen {
    socket = "/var/run/radiusd/radiusd.sock"
 }
}
listen {
    type = "auth"
    ipaddr = 127.0.0.1
    port = 18120
}
 ... adding new socket proxy address * port 35647
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /var/run/radiusd/radiusd.sock
Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.
Ready to process requests.
Signalled to terminate
Exiting normally.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20130905/62a07df2/attachment-0001.html>