[sqlippool] No Pool-Name defined.

yata aurens.memuro02 at gmail.com
Mon Apr 28 08:39:05 CEST 2014


Hi
I wanna use freeradius2 as a radius-server and dhcp-server.
When I try to connect to radius-server,following errors show up.
I think authentication is look fine.then message said sqlippool not defined.
but I set up as below.
What's wrong with my settings?

------------radiusd -X-----------------
 ... adding new socket proxy address * port 55682
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /var/run/radiusd/radiusd.sock
Listening on authentication address 127.0.0.1 port 18120 as server
inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 10.0.5.200 port 50000, id=3,
length=205
        User-Password = "test"
        User-Name = "user at mondomaine.fr"
        Acct-Session-Id = "erx FastEthernet 1/6:0011534340"
        Service-Type = Framed-User
        Framed-Protocol = PPP
        ERX-Pppoe-Description = "pppoe 00:1d:72:c6:7b:d5"
        Calling-Station-Id = "#ERX-40-b0-7a#E16#0"
        NAS-Port-Type = Ethernet
        NAS-Port = 369098752
        NAS-Port-Id = "FastEthernet 1/6"
        NAS-IP-Address = 10.0.5.200
        NAS-Identifier = "ERX-40-b0-7a"
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] Looking up realm "mondomaine.fr" for User-Name = "
user at mondomaine.fr"
[suffix] No such realm "mondomaine.fr"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
[files] users: Matched entry user at mondomaine.fr at line 6
[files] users: Matched entry DEFAULT at line 183
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns updated
Found Auth-Type = PAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group PAP {...}
[pap] login attempt with password "test"
[pap] Using clear text password "test"
[pap] User authenticated successfully
++[pap] returns ok
Login OK: [user at mondomaine.fr] (from client GGSN1 port 369098752 cli
#ERX-40-b0-7a#E16#0)
# Executing section post-auth from file /etc/raddb/sites-enabled/default
+- entering group post-auth {...}
[sqlippool] No Pool-Name defined.
[sqlippool]     expand: No Pool-Name defined   (did %{Called-Station-Id}
cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name}) -> No
Pool-Name defined   (did  cli #ERX-40-b0-7a#E16#0 port 369098752 user
user at mondomaine.fr)
No Pool-Name defined   (did  cli #ERX-40-b0-7a#E16#0 port 369098752 user
user at mondomaine.fr)
++[sqlippool] returns noop
++[exec] returns noop
Sending Access-Accept of id 3 to 10.0.5.200 port 50000
        NAS-IP-Address == 10.0.5.200
        Framed-Protocol = PPP
        Framed-Compression = Van-Jacobson-TCP-IP
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Accounting-Request packet from host 10.0.5.200 port 50016, id=73,
length=246
        Acct-Status-Type = Stop
        User-Name = "user at mondomaine.fr"
        Event-Timestamp = "Apr 27 2014 14:19:10 PDT"
        Acct-Delay-Time = 0
        NAS-Identifier = "ERX-40-b0-7a"
        Acct-Session-Id = "erx FastEthernet 1/6:0011534340"
        NAS-IP-Address = 10.0.5.200
        Service-Type = Framed-User
        Calling-Station-Id = "#ERX-40-b0-7a#E16#0"
        Acct-Input-Gigawords = 0
        Acct-Input-Octets = 0
        Acct-Output-Gigawords = 0
        Acct-Output-Octets = 0
        ERX-Input-Gigapkts = 0
        Acct-Input-Packets = 0
        ERX-Output-Gigapkts = 0
        Acct-Output-Packets = 0
        NAS-Port-Type = Ethernet
        NAS-Port = 369098752
        NAS-Port-Id = "FastEthernet 1/6"
        Acct-Authentic = RADIUS
        Acct-Session-Time = 0
        Acct-Terminate-Cause = NAS-Request
# Executing section preacct from file /etc/raddb/sites-enabled/default
+- entering group preacct {...}
++[preprocess] returns ok
[acct_unique] Hashing 'NAS-Port = 369098752,Client-IP-Address =
10.0.5.200,NAS-IP-Address = 10.0.5.200,Acct-Session-Id = "erx FastEthernet
1/6:0011534340",User-Name = "user at mondomaine.fr"'
[acct_unique] Acct-Unique-Session-ID = "fbbf6a6fb6bf3d32".
++[acct_unique] returns ok
[suffix] Looking up realm "mondomaine.fr" for User-Name = "
user at mondomaine.fr"
[suffix] No such realm "mondomaine.fr"
++[suffix] returns noop
++[files] returns noop
# Executing section accounting from file /etc/raddb/sites-enabled/default
+- entering group accounting {...}
[detail]        expand: %{Packet-Src-IP-Address} -> 10.0.5.200
[detail]        expand:
/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d
-> /var/log/radius/radacct/10.0.5.200/detail-20140427
[detail]
/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d
expands to /var/log/radius/radacct/10.0.5.200/detail-20140427
[detail]        expand: %t -> Sun Apr 27 22:49:32 2014
++[detail] returns ok
++[unix] returns ok
[radutmp]       expand: /var/log/radius/radutmp -> /var/log/radius/radutmp
[radutmp]       expand: %{User-Name} -> user at mondomaine.fr
rlm_radutmp: Logout for NAS GGSN1 port 369098752, but no Login record
++[radutmp] returns ok
rlm_sql (sql): Reserving sql socket id: 13
[sqlippool]     expand: %{User-Name} -> user at mondomaine.fr
[sqlippool] sql_set_user escaped user --> 'user at mondomaine.fr'
[sqlippool]     expand: START TRANSACTION -> START TRANSACTION
[sqlippool]     expand: UPDATE radippool  SET nasipaddress = '', pool_key =
0, callingstationid = '', username = '',  expiry_time = NULL  WHERE
nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{NAS-Port}'  AND
username = '%{User-Name}'  AND callingstationid = '%{Calling-Station-Id}'
 AND framedipaddress = '%{Framed-IP-Address}' -> UPDATE radippool  SET
nasipaddress = '', pool_key = 0, callingstationid = '', username = '',
 expiry_time = NULL  WHERE nasipaddress = '10.0.5.200' AND pool_key =
'369098752'  AND username = 'user at mondomaine.fr'  AND callingstationid =
'=23ERX-40-b0-7a=23E16=230'  AND framedipaddress = ''
[sqlippool]     expand: COMMIT -> COMMIT
[sqlippool]     expand: Released IP %{Framed-IP-Address} (did
%{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name}) ->
Released IP  (did  cli #ERX-40-b0-7a#E16#0 user user at mondomaine.fr)
Released IP  (did  cli #ERX-40-b0-7a#E16#0 user user at mondomaine.fr)
rlm_sql (sql): Released sql socket id: 13
++[sqlippool] returns ok
++[exec] returns noop
[attr_filter.accounting_response]       expand: %{User-Name} ->
user at mondomaine.fr
attr_filter: Matched entry DEFAULT at line 12
++[attr_filter.accounting_response] returns updated
Sending Accounting-Response of id 73 to 10.0.5.200 port 50016
Finished request 1.
Cleaning up request 1 ID 73 with timestamp +10
Going to the next request
Waking up in 4.9 seconds.
Cleaning up request 0 ID 3 with timestamp +10
Ready to process requests.
------------------------------------------------------------





---------------------sqlippool.conf------------------------------
##  Configuration for the SQL based IP Pool module (rlm_sqlippool)
##
##  The database schemas are available at:
##
##       raddb/sql/DB/ippool.sql
##
##  $Id$

sqlippool {

 #########################################
 ## SQL instance to use (from sql.conf) ##
 ##
 ##  If you have multiple sql instances, such as "sql sql1 {...}",
 ##  use the *instance* name here: sql1.
 #########################################
 sql-instance-name = "sql"

 ## SQL table to use for ippool range and lease info
 ippool_table = "radippool"

 ## IP lease duration. (Leases expire even if Acct Stop packet is lost)
 lease-duration = 3600

 ## Attribute which should be considered unique per NAS
 ## Using NAS-Port gives behaviour similar to rlm_ippool. (And ACS)
 ## Using Calling-Station-Id works for NAS that send fixed NAS-Port
 ## ONLY change this if you know what you are doing!
 pool-key = "%{NAS-Port}"
 # pool-key = "%{Calling-Station-Id}"

 ################################################################
 #
 #  WARNING: MySQL has certain limitations that means it can
 #           hand out the same IP address to 2 different users.
 #
 #           We suggest using an SQL DB with proper transaction
 #           support, such as PostgreSQL, or using MySQL
 #      with InnoDB.
 #
 ################################################################

 #
 #  Use the same database as configured in the "sql" module, "database"
 #  configuration item.  Change the "postgresql" name below to be the
 #  same as the "database" field of the SQL module referred to in the
 #  "sql-instance-name", above.
 #
#$INCLUDE sql/postgresql/ippool.conf
$INCLUDE sql/mysql/ippool.conf

 ## Logging configuration. (Comment out to disable logging)
 sqlippool_log_exists = "Existing IP: %{reply:Framed-IP-Address} \
  (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user
%{User-Name})"

 sqlippool_log_success = "Allocated IP: %{reply:Framed-IP-Address} from
%{control:Pool-Name} \
  (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user
%{User-Name})"

 sqlippool_log_clear = "Released IP %{Framed-IP-Address}\
 (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})"

 sqlippool_log_failed = "IP Allocation FAILED from %{control:Pool-Name} \
  (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user
%{User-Name})"

 sqlippool_log_nopool = "No Pool-Name defined \
  (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user
%{User-Name})"

}
-------------------------------------------------------------------





------------------------------sql.conf---------------------------------
# -*- text -*-
##
## sql.conf -- SQL modules
##
## $Id$

######################################################################
#
#  Configuration for the SQL module
#
#  The database schemas and queries are located in subdirectories:
#
# sql/DB/schema.sql Schema
# sql/DB/dialup.conf Basic dialup (including policy) queries
# sql/DB/counter.conf counter
# sql/DB/ippool.conf IP Pools in SQL
# sql/DB/ippool.sql schema for IP pools.
#
#  Where "DB" is mysql, mssql, oracle, or postgresql.
#

sql {
#
#  Set the database to one of:
#
# mysql, mssql, oracle, postgresql
#
database = "mysql"

#
#  Which FreeRADIUS driver to use.
#
driver = "rlm_sql_${database}"

# Connection info:
server = "localhost"
#port = 3306
login = "userfreeradius"
password = "pwdfreeradius"

# Database table configuration for everything except Oracle
radius_db = "freeradius"
# If you are using Oracle then use this instead
        # radius_db =
"(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SID=your_sid)))"

# If you want both stop and start records logged to the
# same SQL table, leave this as is.  If you want them in
# different tables, put the start table in acct_table1
# and stop table in acct_table2
acct_table1 = "radacct"
acct_table2 = "radacct"

# Allow for storing data after authentication
postauth_table = "radpostauth"

authcheck_table = "radcheck"
authreply_table = "radreply"

groupcheck_table = "radgroupcheck"
groupreply_table = "radgroupreply"

# Table to keep group info
usergroup_table = "radusergroup"

# If set to 'yes' (default) we read the group tables
# If set to 'no' the user MUST have Fall-Through = Yes in the radreply table
read_groups = yes

# Remove stale session if checkrad does not see a double login
deletestalesessions = yes

# Print all SQL statements when in debug mode (-x)
sqltrace = no
sqltracefile = ${logdir}/sqltrace.sql

# number of sql connections to make to server
num_sql_socks = 15

# number of seconds to dely retrying on a failed database
# connection (per_socket)
connect_failure_retry_delay = 60

# lifetime of an SQL socket.  If you are having network issues
# such as TCP sessions expiring, you may need to set the socket
# lifetime.  If set to non-zero, any open connections will be
# closed "lifetime" seconds after they were first opened.
lifetime = 0

# Maximum number of queries used by an SQL socket.  If you are
# having issues with SQL sockets lasting "too long", you can
# limit the number of queries performed over one socket.  After
# "max_qeuries", the socket will be closed.  Use 0 for "no limit".
max_queries = 0

# Set to 'yes' to read radius clients from the database ('nas' table)
# Clients will ONLY be read on server startup.  For performance
# and security reasons, finding clients via SQL queries CANNOT
# be done "live" while the server is running.
#
readclients = yes

# Table to keep radius client info
nas_table = "nas"

# Read driver-specific configuration
$INCLUDE sql/${database}/dialup.conf
}
---------------------------------------------------------------------------

If these information is not enough please let me know.

Thanks,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20140428/03ff4bb8/attachment-0001.html>


More information about the Freeradius-Users mailing list