xl2tp+radius+mysql

[Xu Tingting]

Dear All,

I have configured openswan+xl2tp+radius.
If i run xl2tpd without radius authentication, it works fine.
But while configure with radius authentication , it failes.

Following are my configureations.

ipsec.conf
-------------------------------------
config setup
         protostack=netkey
nat_traversal=yes
virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12
oe=off
conn L2TP-PSK-NAT
rightsubnet=vhost:%priv
also=L2TP-PSK-noNAT

conn L2TP-PSK-noNAT
authby=secret
pfs=no
auto=add
keyingtries=3
rekey=no
ikelifetime=8h
type=transport
left=Server-IP
leftprotoport=17/1701
right=%any
rightprotoport=17/%any
------------------------------

xl2tpd.conf
-------------------------------------------------------
[global]
listen-addr = Server-IP
force userspace = yes
[lns default]
ip range = 192.168.8.2-192.168.8.254
local ip = 192.168.8.1
require chap = yes
refuse pap = yes
require authentication = yes
name = xl2tpd
ppp debug = yes
pppoptfile = /etc/ppp/options.xl2tpd
length bit = yes
--------------------------------------------------------
name xl2tpd
require-mschap-v2
auth
ms-dns  8.8.8.8
ms-dns  8.8.4.4
nodefaultroute
idle 1800
debug
lock
nobsdcomp
novj
novjccomp
nologfd
lcp-echo-interval 5
lcp-echo-failure 5
proxyarp
connect-delay 5000
plugin radius.so
plugin radattr.so
radius-config-file /etc/radiusclient/radiusclient.conf
--------------------------------------
the logfile:
------------------
Dec  5 03:36:43 vpn2 xl2tpd[22927]: Connection established to IP, 1701.
Local: 23899, Remote: 18 (ref=0/0).  LNS session is 'default'
Dec  5 03:36:43 vpn2 xl2tpd[22927]: Call established with IP, Local: 30311,
Remote: 1, Serial: 0
Dec  5 03:36:43 vpn2 pppd[23048]: Plugin radius.so loaded.
Dec  5 03:36:43 vpn2 pppd[23048]: RADIUS plugin initialized.
Dec  5 03:36:43 vpn2 pppd[23048]: Plugin radattr.so loaded.
Dec  5 03:36:43 vpn2 pppd[23048]: RADATTR plugin initialized.
Dec  5 03:36:43 vpn2 pppd[23048]: pppd 2.4.5 started by root, uid 0
Dec  5 03:36:43 vpn2 pppd[23048]: Using interface ppp0
Dec  5 03:36:43 vpn2 pppd[23048]: Connect: ppp0 <--> /dev/pts/1
Dec  5 03:36:47 vpn2 pppd[23048]: rc_avpair_new: unknown attribute 60
Dec  5 03:36:48 vpn2 pppd[23048]: Peer xul2tp failed CHAP authentication
Dec  5 03:36:48 vpn2 pppd[23048]: Connection terminated.
Dec  5 03:36:48 vpn2 pppd[23048]: Exit.
Dec  5 03:36:48 vpn2 xl2tpd[22927]: call_close: Call 30311 to IP
disconnected
Dec  5 03:36:48 vpn2 xl2tpd[22927]: control_finish: Connection closed to
IP, serial 0 ()
Dec  5 03:36:48 vpn2 xl2tpd[22927]: control_finish: Connection closed to
IP, port 1701 (), Local: 23899, Remote: 18

There is no errors for my radius configuration.
What's more ,the pptp with my radius works fine, only the xl2tpd failes.

Anyone can help me?
Thanks.



-- 
Best regards,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20141205/f0c6f179/attachment-0001.html>