Order of loading modules

[stefan.paetow at diamond.ac.uk]

Compare your two perl modules.

The FreeRADIUS configuration might be identical, but the *CONTENTS* of the /product/freeradius-server-2.1.12_0/etc/raddb//modules/perl files are different between the two servers.

On the one, the default example.pl is listed as the perl module. On the other, the module to load has been specified as perl_Originale.

Read the debug output carefully when you look at the log, and you would notice the difference. It’s subtle, but it’s there.

Stefan


From: freeradius-users-bounces+stefan.paetow=diamond.ac.uk at lists.freeradius.org [mailto:freeradius-users-bounces+stefan.paetow=diamond.ac.uk at lists.freeradius.org] On Behalf Of Francesco Maisano
Sent: 07 January 2014 00:13
To: FreeRadius users mailing list
Subject: Re: Order of loading modules

Sorry Alan,
i see my configuration in instantiate section and I do not understand where it is shown the load order of the modules, please explain me.
Below my radiusd.conf (same file for each servers) and startup of freeradius in debug mode on server A and on server B and you see the difference in loading modules order.

Debug log info:
radius_debug_server_A.log --> be careful to line number 46 (load perl module) and 62 (load perl_Originale module)
radius_debug_server_B.log --> be careful to line number 45 (load perl_Originale module) and 58 (load perl module)

[snipped for brevity]

-- 
This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd. 
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom