rlm_perl bug while adding VSA?
magmike at mail.ru
magmike at mail.ru
Thu Jan 16 13:30:39 CET 2014
rlm_perl add incorrect AVP while receiving acct-packet with VSA.
device which sending radius packet use eltex dictionary (dictionary.eltex)
---------------------------------------------------------
VENDOR Eltex 35265
BEGIN-VENDOR Eltex
ATTRIBUTE Eltex-AVPair 1 string
ATTRIBUTE Incoming-SIP-call-id 2 string
ATTRIBUTE Outgoing-SIP-call-id 3 string
ATTRIBUTE Incoming-RTP-local-address 4 ipaddr
ATTRIBUTE Incoming-RTP-remote-address 5 ipaddr
ATTRIBUTE Outgoing-RTP-local-address 6 ipaddr
ATTRIBUTE Outgoing-RTP-remote-address 7 ipaddr
ATTRIBUTE Disconnect-Code-Local 11 integer
END-VENDOR Eltex
-----------------------------------------------------------
in debug i see good packet received by radius:
rad_recv: Accounting-Request packet from host 192.168.243.243 port 44825, id=109, length=997
Acct-Status-Type = Stop
User-Name = "123456"
Calling-Station-Id = "123456"
Called-Station-Id = "89121223456"
Acct-Session-Id = "1100037f 52d7b893 6f9a90c4 240760f0"
Event-Timestamp = "Jan 16 2014 16:46:55 YEKT"
NAS-Port = 285213567
NAS-Port-Type = Async
Cisco-NAS-Port = "SIPT:037f"
Cisco-AVPair = "xpgk-src-number-in=123456"
Cisco-AVPair = "xpgk-src-number-out=83512123456"
Cisco-AVPair = "xpgk-dst-number-in=89121223456"
Cisco-AVPair = "xpgk-dst-number-out=89121223456"
Cisco-AVPair = "xpgk-route-retries=1"
Cisco-AVPair = "h323-remote-id=TRUNK_MTT"
Cisco-AVPair = "h323-call-id=1100037f 52d7b893 6f9a90c4 240760f0"
h323-remote-address = "10.75.130.154"
Cisco-AVPair = "h323-incoming-conf-id=1100037f 52d7b893 6f9a90c4 240760f0"
h323-conf-id = "1100037f 52d7b893 6f9a90c4 240760f0"
h323-setup-time = "16:46:43.000 GMT+6 Thu Jan 16 2014"
h323-call-origin = "originate"
h323-call-type = "VoIP"
h323-connect-time = "16:46:54.000 GMT+6 Thu Jan 16 2014"
h323-disconnect-time = "16:46:55.000 GMT+6 Thu Jan 16 2014"
h323-disconnect-cause = "10"
Cisco-AVPair = "xpgk-local-disconnect-cause=1"
Acct-Session-Time = 1
Eltex-AVPair = "session-time=1"
Acct-Delay-Time = 5
Incoming-SIP-call-id = "db876304-9012337d at 192.168.243.86"
Eltex-AVPair = "Incoming-codec=G711.A"
Incoming-RTP-local-address = 172.16.0.227
Incoming-RTP-remote-address = 192.168.243.86
Outgoing-SIP-call-id = "1389-869203-968339"
Eltex-AVPair = "Outgoing-codec=G711.A"
Outgoing-RTP-local-address = 172.16.0.227
Outgoing-RTP-remote-address = 10.75.130.154
NAS-IP-Address = 192.168.243.243
Cisco-AVPair = "h323-gw-address=192.168.243.243"
h323-gw-id = "192.168.243.243"
All VSA for Eltex in vendor's packet are:
Incoming-SIP-call-id = "db876304-9012337d at 192.168.243.86"
Eltex-AVPair = "Incoming-codec=G711.A"
Incoming-RTP-local-address = 172.16.0.227
Incoming-RTP-remote-address = 192.168.243.86
Outgoing-SIP-call-id = "1389-869203-968339"
Eltex-AVPair = "Outgoing-codec=G711.A"
Outgoing-RTP-local-address = 172.16.0.227
Outgoing-RTP-remote-address = 10.75.130.154
when rlm_perl used in preacc section debug show:
Thu Jan 16 17:41:05 2014 : Info: # Executing section preacct from file /etc/freeradius/sites-enabled/default
Thu Jan 16 17:41:05 2014 : Info: +- entering group preacct {...}
Thu Jan 16 17:41:05 2014 : Info: ++[preprocess] returns ok
Thu Jan 16 17:41:05 2014 : Info: [acct_unique] Hashing 'NAS-Port = 285213567,Client-IP-Address = 192.168.243.243,NAS-IP-Address = 192.168.243.24
3,Acct-Session-Id = "1100037f 52d7b893 6f9a90c4 240760f0",User-Name = "123456"'
Thu Jan 16 17:41:05 2014 : Info: [acct_unique] Acct-Unique-Session-ID = "68185495bd67a53b".
Thu Jan 16 17:41:05 2014 : Info: ++[acct_unique] returns ok
Thu Jan 16 17:41:05 2014 : Info: [suffix] No '@' in User-Name = "123456", looking up realm NULL
Thu Jan 16 17:41:05 2014 : Info: [suffix] No such realm "NULL"
Thu Jan 16 17:41:05 2014 : Info: ++[suffix] returns noop
Thu Jan 16 17:41:05 2014 : Info: ++[files] returns noop
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair NAS-Port-Type = Async
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Incoming-RTP-remote-address = 192.168.243.86
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: ERROR: Failed to create pair Incoming-RTP-remote-address = 1389-869203-968339
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Incoming-RTP-remote-address = 172.16.0.227
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Incoming-RTP-remote-address = 10.75.130.154
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Incoming-RTP-remote-address = 192.168.243.243
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Incoming-RTP-remote-address = 192.168.243.243
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: ERROR: Failed to create pair Incoming-RTP-remote-address = 1100037f 52d7b893 6f9a90c4 240760f0
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: ERROR: Failed to create pair Incoming-RTP-remote-address = 68185495bd67a53b
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair h323-gw-id = 192.168.243.243
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Acct-Unique-Session-Id = 68185495bd67a53b
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Called-Station-Id = 89121223456
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair h323-call-type = VoIP
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair h323-call-origin = originate
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Eltex-AVPair = session-time=1
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Eltex-AVPair = 5
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Eltex-AVPair = db876304-9012337d at 192.168.243.86
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Eltex-AVPair = Incoming-codec=G711.A
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Eltex-AVPair = 172.16.0.227
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Eltex-AVPair = 192.168.243.86
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Eltex-AVPair = 1389-869203-968339
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Eltex-AVPair = Outgoing-codec=G711.A
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Eltex-AVPair = 172.16.0.227
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Eltex-AVPair = 10.75.130.154
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Eltex-AVPair = 192.168.243.243
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Eltex-AVPair = 192.168.243.243
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Eltex-AVPair = 1100037f 52d7b893 6f9a90c4 240760f0
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Eltex-AVPair = 68185495bd67a53b
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Acct-Status-Type = Stop
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair NAS-IP-Address = 192.168.243.243
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair h323-disconnect-cause = 10
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Acct-Session-Time = 1
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair h323-incoming-conf-id = 1100037f 52d7b893 6f9a90c4 240760f0
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair User-Name = 123456
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Outgoing-SIP-call-id = 1389-869203-968339
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Outgoing-SIP-call-id = 172.16.0.227
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Outgoing-SIP-call-id = 10.75.130.154
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Outgoing-SIP-call-id = 192.168.243.243
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Outgoing-SIP-call-id = 192.168.243.243
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Outgoing-SIP-call-id = 1100037f 52d7b893 6f9a90c4 240760f0
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Outgoing-SIP-call-id = 68185495bd67a53b
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair SIP-AVP = callernum:123456;calleenum:89121223456
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Acct-Session-Id = 1100037f 52d7b893 6f9a90c4 240760f0
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair h323-connect-time = 16:46:54.000 GMT+6 Thu Jan 16 2014
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Outgoing-RTP-local-address = 172.16.0.227
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Outgoing-RTP-local-address = 10.75.130.154
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Outgoing-RTP-local-address = 192.168.243.243
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Outgoing-RTP-local-address = 192.168.243.243
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: ERROR: Failed to create pair Outgoing-RTP-local-address = 1100037f 52d7b893 6f9a90c4 240760f0
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: ERROR: Failed to create pair Outgoing-RTP-local-address = 68185495bd67a53b
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair h323-setup-time = 16:46:43.000 GMT+6 Thu Jan 16 2014
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Cisco-NAS-Port = SIPT:037f
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair h323-conf-id = 1100037f 52d7b893 6f9a90c4 240760f0
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Outgoing-RTP-remote-address = 10.75.130.154
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Outgoing-RTP-remote-address = 192.168.243.243
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Outgoing-RTP-remote-address = 192.168.243.243
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: ERROR: Failed to create pair Outgoing-RTP-remote-address = 1100037f 52d7b893 6f9a90c4 240760f0
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: ERROR: Failed to create pair Outgoing-RTP-remote-address = 68185495bd67a53b
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Incoming-SIP-call-id = db876304-9012337d at 192.168.243.86
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Incoming-SIP-call-id = 172.16.0.227
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Incoming-SIP-call-id = 192.168.243.86
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Incoming-SIP-call-id = 1389-869203-968339
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Incoming-SIP-call-id = 172.16.0.227
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Incoming-SIP-call-id = 10.75.130.154
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Incoming-SIP-call-id = 192.168.243.243
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Incoming-SIP-call-id = 192.168.243.243
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Incoming-SIP-call-id = 1100037f 52d7b893 6f9a90c4 240760f0
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Incoming-SIP-call-id = 68185495bd67a53b
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Calling-Station-Id = 123456
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair h323-disconnect-time = 16:46:55.000 GMT+6 Thu Jan 16 2014
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Cisco-AVPair = xpgk-src-number-in=123456
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Cisco-AVPair = xpgk-src-number-out=83512123456
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Cisco-AVPair = xpgk-dst-number-in=89121223456
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Cisco-AVPair = xpgk-dst-number-out=89121223456
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Cisco-AVPair = xpgk-route-retries=1
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Cisco-AVPair = h323-remote-id=TRUNK_MTT
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Cisco-AVPair = h323-call-id=1100037f 52d7b893 6f9a90c4 240760f0
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Cisco-AVPair = h323-incoming-conf-id=1100037f 52d7b893 6f9a90c4 240760f0
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Cisco-AVPair = xpgk-local-disconnect-cause=1
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Cisco-AVPair = h323-gw-address=192.168.243.243
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair h323-remote-address = 10.75.130.154
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Event-Timestamp = Jan 16 2014 16:46:55 YEKT
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair NAS-Port = 285213567
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Acct-Delay-Time = 5
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Incoming-RTP-local-address = 172.16.0.227
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Incoming-RTP-local-address = 192.168.243.86
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: ERROR: Failed to create pair Incoming-RTP-local-address = 1389-869203-968339
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Incoming-RTP-local-address = 172.16.0.227
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Incoming-RTP-local-address = 10.75.130.154
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Incoming-RTP-local-address = 192.168.243.243
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: Added pair Incoming-RTP-local-address = 192.168.243.243
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: ERROR: Failed to create pair Incoming-RTP-local-address = 1100037f 52d7b893 6f9a90c4 240760f0
Thu Jan 16 17:41:05 2014 : Debug: rlm_perl: ERROR: Failed to create pair Incoming-RTP-local-address = 68185495bd67a53b
Thu Jan 16 17:41:05 2014 : Info: ++[perl] returns ok
i.e. all VSA get more then one values.
e.g., Outgoing-SIP-call-id:
Outgoing-SIP-call-id = 1389-869203-968339
Outgoing-SIP-call-id = 172.16.0.227
Outgoing-SIP-call-id = 10.75.130.154
Outgoing-SIP-call-id = 192.168.243.243
Outgoing-SIP-call-id = 192.168.243.243
Outgoing-SIP-call-id = 1100037f 52d7b893 6f9a90c4 240760f0
Outgoing-SIP-call-id = 68185495bd67a53b
All others VSA is broked also.
I dump Accounting-Request packet in text file and "send" it via radclient
$ cat pak | radclient localhost acct secret
I got the same corruption.
BUT!!!!
When i change vendor id in dictionary file
VENDOR Eltex 35265
to
VENDOR Eltex 5265
rlm_perl works fine!
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair NAS-Port-Type = Async
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Incoming-RTP-remote-address = 192.168.243.86
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair h323-gw-id = 192.168.243.243
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Acct-Unique-Session-Id = 68185495bd67a53b
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Called-Station-Id = 89121223456
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair h323-call-type = VoIP
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair h323-call-origin = originate
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Eltex-AVPair = session-time=1
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Eltex-AVPair = Incoming-codec=G711.A
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Eltex-AVPair = Outgoing-codec=G711.A
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Acct-Status-Type = Stop
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair NAS-IP-Address = 192.168.243.243
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair h323-disconnect-cause = 10
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Acct-Session-Time = 1
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair h323-incoming-conf-id = 1100037f 52d7b893 6f9a90c4 240760f0
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair User-Name = 123456
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Outgoing-SIP-call-id = 1389-869203-968339
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair SIP-AVP = callernum:123456;calleenum:89121223456
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Acct-Session-Id = 1100037f 52d7b893 6f9a90c4 240760f0
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair h323-connect-time = 16:46:54.000 GMT+6 Thu Jan 16 2014
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Outgoing-RTP-local-address = 172.16.0.227
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair h323-setup-time = 16:46:43.000 GMT+6 Thu Jan 16 2014
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Cisco-NAS-Port = SIPT:037f
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair h323-conf-id = 1100037f 52d7b893 6f9a90c4 240760f0
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Outgoing-RTP-remote-address = 10.75.130.154
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Incoming-SIP-call-id = db876304-9012337d at 192.168.243.86
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Calling-Station-Id = 123456
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair h323-disconnect-time = 16:46:55.000 GMT+6 Thu Jan 16 2014
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Cisco-AVPair = xpgk-src-number-in=123456
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Cisco-AVPair = xpgk-src-number-out=83512123456
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Cisco-AVPair = xpgk-dst-number-in=89121223456
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Cisco-AVPair = xpgk-dst-number-out=89121223456
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Cisco-AVPair = xpgk-route-retries=1
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Cisco-AVPair = h323-remote-id=TRUNK_MTT
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Cisco-AVPair = h323-call-id=1100037f 52d7b893 6f9a90c4 240760f0
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Cisco-AVPair = h323-incoming-conf-id=1100037f 52d7b893 6f9a90c4 240760f0
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Cisco-AVPair = xpgk-local-disconnect-cause=1
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Cisco-AVPair = h323-gw-address=192.168.243.243
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair h323-remote-address = 10.75.130.154
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Event-Timestamp = Jan 16 2014 16:46:55 YEKT
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair NAS-Port = 285213567
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Acct-Delay-Time = 5
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Incoming-RTP-local-address = 172.16.0.227
only one line
Thu Jan 16 18:14:21 2014 : Debug: rlm_perl: Added pair Outgoing-SIP-call-id = 1389-869203-968339
what is wrong? where is bug?
Best regards,
Michael
More information about the Freeradius-Users
mailing list