HP M200 certificate authentication fails
Gordon Cook
gcook at ssmic.com
Thu Jul 24 15:08:09 CEST 2014
I am fairly new at this. I am leaning more towards a configuration issue in freeradius. The configuration needs to be adjusted to handle some difference in the HP AP vs the Cisco AP.
root at Radius2:/usr/local/etc/raddb # radiusd -X
radiusd: FreeRADIUS Version 2.2.5, for host i386-portbld-freebsd10.0, built on Jul 22 2014 at 12:54:06
Copyright (C) 1999-2013 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License.
For more information about these matters, see the file named COPYRIGHT.
Starting - reading configuration files ...
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/modules/
including configuration file /usr/local/etc/raddb/modules/wimax
including configuration file /usr/local/etc/raddb/modules/always
including configuration file /usr/local/etc/raddb/modules/attr_filter
including configuration file /usr/local/etc/raddb/modules/attr_rewrite
including configuration file /usr/local/etc/raddb/modules/cache
including configuration file /usr/local/etc/raddb/modules/chap
including configuration file /usr/local/etc/raddb/modules/checkval
including configuration file /usr/local/etc/raddb/modules/counter
including configuration file /usr/local/etc/raddb/modules/cui
including configuration file /usr/local/etc/raddb/modules/detail
including configuration file /usr/local/etc/raddb/modules/detail.example.com
including configuration file /usr/local/etc/raddb/modules/detail.log
including configuration file /usr/local/etc/raddb/modules/dhcp_sqlippool
including configuration file /usr/local/etc/raddb/sql/mysql/ippool-dhcp.conf
including configuration file /usr/local/etc/raddb/modules/digest
including configuration file /usr/local/etc/raddb/modules/dynamic_clients
including configuration file /usr/local/etc/raddb/modules/echo
including configuration file /usr/local/etc/raddb/modules/etc_group
including configuration file /usr/local/etc/raddb/modules/exec
including configuration file /usr/local/etc/raddb/modules/expiration
including configuration file /usr/local/etc/raddb/modules/expr
including configuration file /usr/local/etc/raddb/modules/files
including configuration file /usr/local/etc/raddb/modules/inner-eap
including configuration file /usr/local/etc/raddb/modules/ippool
including configuration file /usr/local/etc/raddb/modules/krb5
including configuration file /usr/local/etc/raddb/modules/ldap
including configuration file /usr/local/etc/raddb/modules/linelog
including configuration file /usr/local/etc/raddb/modules/otp
including configuration file /usr/local/etc/raddb/modules/logintime
including configuration file /usr/local/etc/raddb/modules/mac2ip
including configuration file /usr/local/etc/raddb/modules/mac2vlan
including configuration file /usr/local/etc/raddb/modules/mschap
including configuration file /usr/local/etc/raddb/modules/ntlm_auth
including configuration file /usr/local/etc/raddb/modules/opendirectory
including configuration file /usr/local/etc/raddb/modules/pam
including configuration file /usr/local/etc/raddb/modules/pap
including configuration file /usr/local/etc/raddb/modules/passwd
including configuration file /usr/local/etc/raddb/modules/perl
including configuration file /usr/local/etc/raddb/modules/policy
including configuration file /usr/local/etc/raddb/modules/preprocess
including configuration file /usr/local/etc/raddb/modules/radrelay
including configuration file /usr/local/etc/raddb/modules/radutmp
including configuration file /usr/local/etc/raddb/modules/realm
including configuration file /usr/local/etc/raddb/modules/redis
including configuration file /usr/local/etc/raddb/modules/rediswho
including configuration file /usr/local/etc/raddb/modules/replicate
including configuration file /usr/local/etc/raddb/modules/smbpasswd
including configuration file /usr/local/etc/raddb/modules/smsotp
including configuration file /usr/local/etc/raddb/modules/soh
including configuration file /usr/local/etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /usr/local/etc/raddb/modules/sql_log
including configuration file /usr/local/etc/raddb/modules/sradutmp
including configuration file /usr/local/etc/raddb/modules/unix
including configuration file /usr/local/etc/raddb/modules/acct_unique
including configuration file /usr/local/etc/raddb/eap.conf
including configuration file /usr/local/etc/raddb/policy.conf
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/control-socket
including configuration file /usr/local/etc/raddb/sites-enabled/default
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
main {
user = "freeradius"
group = "freeradius"
allow_core_dumps = no
}
including dictionary file /usr/local/etc/raddb/dictionary
main {
name = "radiusd"
prefix = "/usr/local"
localstatedir = "/var"
sbindir = "/usr/local/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/local/lib/freeradius-2.2.0"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/local/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
allow_vulnerable_openssl = no
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
require_message_authenticator = yes
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "Radius at dm1n"
nastype = "other"
}
client 172.30.0.250 {
require_message_authenticator = no
secret = "Radius at dm1n"
shortname = "Wireless_ap1"
nastype = "other"
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating module "exec" from file /usr/local/etc/raddb/modules/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating module "expr" from file /usr/local/etc/raddb/modules/expr
Module: Linked to module rlm_expiration
Module: Instantiating module "expiration" from file /usr/local/etc/raddb/modules/expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating module "logintime" from file /usr/local/etc/raddb/modules/logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server { # from file e
modules {
Module: Creating Auth-Type = digest
Module: Creating Post-Auth-Type = REJECT
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating module "pap" from file /usr/local/etc/raddb/modules/pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating module "chap" from file /usr/local/etc/raddb/modules/chap
Module: Linked to module rlm_mschap
Module: Instantiating module "mschap" from file /usr/local/etc/raddb/modules/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
allow_retry = yes
}
Module: Linked to module rlm_digest
Module: Instantiating module "digest" from file /usr/local/etc/raddb/modules/digest
Module: Linked to module rlm_unix
Module: Instantiating module "unix" from file /usr/local/etc/raddb/modules/unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating module "eap" from file /usr/local/etc/raddb/eap.conf
eap {
default_eap_type = "tls"
timer_expire = 60
ignore_unknown_eap_types = yes
cisco_accounting_username_bug = no
max_sessions = 4096
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
CA_path = "/etc/wireless"
pem_file_type = yes
private_key_file = "/etc/wireless/server_key.pem"
certificate_file = "/etc/wireless/server_cert.pem"
CA_file = "/etc/wireless/cacert.pem"
private_key_password = "Radius at dm1n"
dh_file = "/etc/wireless/dh"
random_file = "/etc/wireless/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/usr/local/etc/raddb/certs/bootstrap"
ecdh_curve = "prime256v1"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating module "preprocess" from file /usr/local/etc/raddb/modules/preprocess
preprocess {
huntgroups = "/usr/local/etc/raddb/huntgroups"
hints = "/usr/local/etc/raddb/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
reading pairlist file /usr/local/etc/raddb/huntgroups
reading pairlist file /usr/local/etc/raddb/hints
Module: Linked to module rlm_realm
Module: Instantiating module "suffix" from file /usr/local/etc/raddb/modules/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating module "files" from file /usr/local/etc/raddb/modules/files
files {
usersfile = "/usr/local/etc/raddb/users"
acctusersfile = "/usr/local/etc/raddb/acct_users"
preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
compat = "no"
}
reading pairlist file /usr/local/etc/raddb/users
reading pairlist file /usr/local/etc/raddb/acct_users
reading pairlist file /usr/local/etc/raddb/preproxy_users
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating module "acct_unique" from file /usr/local/etc/raddb/modules/acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, NAS-Identifier, NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating module "detail" from file /usr/local/etc/raddb/modules/detail
detail {
detailfile = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Linked to module rlm_attr_filter
Module: Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/modules/attr_filter
attr_filter attr_filter.accounting_response {
attrsfile = "/usr/local/etc/raddb/attrs.accounting_response"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /usr/local/etc/raddb/attrs.accounting_response
Module: Checking session {...} for more modules to load
Module: Linked to module rlm_radutmp
Module: Instantiating module "radutmp" from file /usr/local/etc/raddb/modules/radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/modules/attr_filter
attr_filter attr_filter.access_reject {
attrsfile = "/usr/local/etc/raddb/attrs.access_reject"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /usr/local/etc/raddb/attrs.access_reject
} # modules
} # server
server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel
modules {
Module: Checking authenticate {...} for more modules to load
Module: Checking authorize {...} for more modules to load
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
listen {
type = "control"
listen {
socket = "/var/run/radiusd/radiusd.sock"
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
... adding new socket proxy address * port 16653
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /var/run/radiusd/radiusd.sock
Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 172.30.0.250 port 32769, id=164, length=230
Acct-Session-Id = "15cc7112-00000075"
NAS-Port = 118
NAS-Port-Type = Wireless-802.11
NAS-Identifier = "Wireless_ap1"
NAS-IP-Address = 172.30.0.250
Framed-MTU = 1496
User-Name = "cgc"
Calling-Station-Id = "00216a987bda"
Called-Station-Id = "2880230d211c"
Service-Type = Framed-User
EAP-Message = 0x027a000801636763
Colubris-AVPair = "ssid=ssmic-new"
Colubris-AVPair = "vsc-unique-id=1"
Colubris-AVPair = "phytype=IEEE802dot11 "
Colubris-Attr-250 = 0x00000000
Colubris-Attr-249 = 0x00000000
Message-Authenticator = 0x20a2e8eb7def88937a7d9d28ab63b966
# Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
+group authorize {
++[preprocess] = ok
++[chap] = noop
++[mschap] = noop
++[digest] = noop
[suffix] No '@' in User-Name = "cgc", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] = noop
[eap] EAP packet type response id 122 length 8
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] = updated
[files] users: Matched entry cgc at line 16
++[files] = ok
++[expiration] = noop
++[logintime] = noop
[pap] WARNING! No "known good" password found for the user. Authentication may fail because of this.
++[pap] = noop
+} # group authorize = updated
Found Auth-Type = EAP
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+group authenticate {
[eap] EAP Identity
[eap] processing type tls
[tls] Requiring client certificate
[tls] Initiate
[tls] Start returned 1
++[eap] = handled
+} # group authenticate = handled
Sending Access-Challenge of id 164 to 172.30.0.250 port 32769
Tunnel-Type:0 = VLAN
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Private-Group-Id:0 = "290"
EAP-Message = 0x017b00060d20
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x1d02d5a51d79d8dae0925046e4e37e98
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 172.30.0.250 port 32769, id=1, length=230
Acct-Session-Id = "daf79885-00000076"
NAS-Port = 119
NAS-Port-Type = Wireless-802.11
NAS-Identifier = "Wireless_ap1"
NAS-IP-Address = 172.30.0.250
Framed-MTU = 1496
User-Name = "cgc"
Calling-Station-Id = "00216a987bda"
Called-Station-Id = "2880230d211c"
Service-Type = Framed-User
EAP-Message = 0x027c000801636763
Colubris-AVPair = "ssid=ssmic-new"
Colubris-AVPair = "vsc-unique-id=1"
Colubris-AVPair = "phytype=IEEE802dot11 "
Colubris-Attr-250 = 0x00000000
Colubris-Attr-249 = 0x00000000
Message-Authenticator = 0x137141fe627b78ed95690c6f8f786309
# Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
+group authorize {
++[preprocess] = ok
++[chap] = noop
++[mschap] = noop
++[digest] = noop
[suffix] No '@' in User-Name = "cgc", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] = noop
[eap] EAP packet type response id 124 length 8
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] = updated
[files] users: Matched entry cgc at line 16
++[files] = ok
++[expiration] = noop
++[logintime] = noop
[pap] WARNING! No "known good" password found for the user. Authentication may fail because of this.
++[pap] = noop
+} # group authorize = updated
Found Auth-Type = EAP
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+group authenticate {
[eap] EAP Identity
[eap] processing type tls
[tls] Requiring client certificate
[tls] Initiate
[tls] Start returned 1
++[eap] = handled
+} # group authenticate = handled
Sending Access-Challenge of id 1 to 172.30.0.250 port 32769
Tunnel-Type:0 = VLAN
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Private-Group-Id:0 = "290"
EAP-Message = 0x017d00060d20
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xc389a266c3f4af0574a4f2011c6a5ca9
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 172.30.0.250 port 32769, id=72, length=367
Acct-Session-Id = "daf79885-00000076"
NAS-Port = 119
NAS-Port-Type = Wireless-802.11
NAS-Identifier = "Wireless_ap1"
NAS-IP-Address = 172.30.0.250
Framed-MTU = 1496
User-Name = "cgc"
Calling-Station-Id = "00216a987bda"
Called-Station-Id = "2880230d211c"
Service-Type = Framed-User
EAP-Message = 0x027d00690d800000005f160301005a01000056030153d1046734f9e83fe1f74b6bd0da8c9480408c0fb7d26fec9aaaa3cc6520bab8000018002f00350005000ac013c014c009c00a003200380013000401000015ff01000100000a0006000400170018000b00020100
State = 0xc389a266c3f4af0574a4f2011c6a5ca9
Colubris-AVPair = "ssid=ssmic-new"
Colubris-AVPair = "incoming-vlan-id=290"
Colubris-AVPair = "vsc-unique-id=1"
Colubris-AVPair = "phytype=IEEE802dot11 "
Colubris-Attr-250 = 0x00000000
Colubris-Attr-249 = 0x00000000
Message-Authenticator = 0x86caf455eff5f43a9a1ea173045901e9
# Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
+group authorize {
++[preprocess] = ok
++[chap] = noop
++[mschap] = noop
++[digest] = noop
[suffix] No '@' in User-Name = "cgc", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] = noop
[eap] EAP packet type response id 125 length 105
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] = updated
[files] users: Matched entry cgc at line 16
++[files] = ok
++[expiration] = noop
++[logintime] = noop
++[pap] = noop
+} # group authorize = updated
Found Auth-Type = EAP
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+group authenticate {
[eap] Request found, released from the list
[eap] EAP/tls
[eap] processing type tls
[tls] Authenticate
[tls] processing EAP-TLS
TLS Length 95
[tls] Length Included
[tls] eaptls_verify returned 11
[tls] (other): before/accept initialization
[tls] TLS_accept: before/accept initialization
[tls] <<< TLS 1.0 Handshake [length 005a], ClientHello
[tls] TLS_accept: SSLv3 read client hello A
[tls] >>> TLS 1.0 Handshake [length 0031], ServerHello
[tls] TLS_accept: SSLv3 write server hello A
[tls] >>> TLS 1.0 Handshake [length 039e], Certificate
[tls] TLS_accept: SSLv3 write certificate A
[tls] >>> TLS 1.0 Handshake [length 008d], CertificateRequest
[tls] TLS_accept: SSLv3 write certificate request A
[tls] TLS_accept: SSLv3 flush data
[tls] TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
[tls] eaptls_process returned 13
++[eap] = handled
+} # group authenticate = handled
Sending Access-Challenge of id 72 to 172.30.0.250 port 32769
Tunnel-Type:0 = VLAN
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Private-Group-Id:0 = "290"
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 0x307b310b3009060355040613
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xc389a266c2f7af0574a4f2011c6a5ca9
Finished request 2.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 172.30.0.250 port 32769, id=91, length=268
Acct-Session-Id = "daf79885-00000076"
NAS-Port = 119
NAS-Port-Type = Wireless-802.11
NAS-Identifier = "Wireless_ap1"
NAS-IP-Address = 172.30.0.250
Framed-MTU = 1496
User-Name = "cgc"
Calling-Station-Id = "00216a987bda"
Called-Station-Id = "2880230d211c"
Service-Type = Framed-User
EAP-Message = 0x027e00060d00
State = 0xc389a266c2f7af0574a4f2011c6a5ca9
Colubris-AVPair = "ssid=ssmic-new"
Colubris-AVPair = "incoming-vlan-id=290"
Colubris-AVPair = "vsc-unique-id=1"
Colubris-AVPair = "phytype=IEEE802dot11 "
Colubris-Attr-250 = 0x00000000
Colubris-Attr-249 = 0x00000000
Message-Authenticator = 0x83f0b0d687466c31929730e8175424d7
# Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
+group authorize {
++[preprocess] = ok
++[chap] = noop
++[mschap] = noop
++[digest] = noop
[suffix] No '@' in User-Name = "cgc", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] = noop
[eap] EAP packet type response id 126 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] = updated
[files] users: Matched entry cgc at line 16
++[files] = ok
++[expiration] = noop
++[logintime] = noop
++[pap] = noop
+} # group authorize = updated
Found Auth-Type = EAP
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+group authenticate {
[eap] Request found, released from the list
[eap] EAP/tls
[eap] processing type tls
[tls] Authenticate
[tls] processing EAP-TLS
[tls] Received TLS ACK
[tls] ACK handshake fragment handler
[tls] eaptls_verify returned 1
[tls] eaptls_process returned 13
++[eap] = handled
+} # group authenticate = handled
Sending Access-Challenge of id 91 to 172.30.0.250 port 32769
Tunnel-Type:0 = VLAN
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Private-Group-Id:0 = "290"
EAP-Message = 0x017f007f0d800000046b0243413110300e06035504080c074f6e746172696f312a3028060355040a0c215361756c7420537465204d6172696520496e6e6f766174696f6e2043656e747265310e300c06035504030c0573736d6963311e301c06092a864886f70d010901160f67636f6f6b4073736d69632e636f6d0e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xc389a266c1f6af0574a4f2011c6a5ca9
Finished request 3.
Going to the next request
Waking up in 4.9 seconds.
Cleaning up request 0 ID 164 with timestamp +12
WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WARNING: !! EAP session for state 0x1d02d5a51d79d8da did not finish!
WARNING: !! Please read http://wiki.freeradius.org/guide/Certificate_Compatibility
WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Cleaning up request 1 ID 1 with timestamp +12
Cleaning up request 2 ID 72 with timestamp +12
Cleaning up request 3 ID 91 with timestamp +12
WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WARNING: !! EAP session for state 0xc389a266c1f6af05 did not finish!
WARNING: !! Please read http://wiki.freeradius.org/guide/Certificate_Compatibility
WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Ready to process requests.
Gordon Cook
-----Original Message-----
From: freeradius-users-bounces+gcook=ssmic.com at lists.freeradius.org [mailto:freeradius-users-bounces+gcook=ssmic.com at lists.freeradius.org] On Behalf Of Alan DeKok
Sent: Wednesday, July 23, 2014 9:03 PM
To: FreeRadius users mailing list
Subject: Re: HP M200 certificate authentication fails
Gordon Cook wrote:
> I have both access points using the same freeRadius2 server which is
> running FreeBSD 9
>
> The client can authenticate using the certificate through the cisco.
>
> The client can authenticate using PAP through the HP
What does that mean?
> The client cannot authenticate using the certificate through the HP.
...
> I have looked through everything I can find and I can’t seem to get it
> to work.
Post the full debug log. Maybe there's something in that which will help.
But nearly all of the time... the problem is in the end-user system or in the access point.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list