radutmp file not created

[Khapare Joshi]

okay, radutmp file is created, it seem that radutmp file relies on detail
log file.


Fri May  2 12:07:10 2014
    Acct-Session-Id = "00000336"
    Called-Station-Id = "c8f9.f917.bd91"
    Calling-Station-Id = "0021.5c5b.8ef3"
    User-Name = "testuser"
    Acct-Authentic = RADIUS
    Acct-Session-Time = 97
    Acct-Input-Octets = 22387
    Acct-Output-Octets = 20126
    Acct-Input-Packets = 252
    Acct-Output-Packets = 120
    Acct-Terminate-Cause = Lost-Carrier
    Acct-Status-Type = Stop
    NAS-Port-Type = Wireless-802.11
    NAS-Port = 1069
    NAS-Port-Id = "1069"
    Service-Type = Framed-User
    NAS-IP-Address = 192.168.1.1
    Acct-Delay-Time = 0
    Acct-Unique-Session-Id = "20e5c440d3d1355a"
    Stripped-User-Name = "testuser"
    Realm = "NULL"
    Timestamp = 1399032430

Fri May  2 12:07:12 2014
    Acct-Session-Id = "00000338"
    Called-Station-Id = "c8f9.f917.bd91"
    Calling-Station-Id = "0021.5c5b.8ef3"
    User-Name = "testuser"
    Acct-Authentic = RADIUS
    Acct-Status-Type = Start
    NAS-Port-Type = Wireless-802.11
    NAS-Port = 1070
    NAS-Port-Id = "1070"
    Service-Type = Framed-User
    NAS-IP-Address = 192.168.1.1
    Acct-Delay-Time = 0
    Acct-Unique-Session-Id = "4a04d32328d2b261"
    Stripped-User-Name = "testuser"
    Realm = "NULL"
    Timestamp = 1399032432


but , if i do radwho in the radius server I still get :
radwho: No configuration information in radutmp section of radiusd.conf!

radutmp file is created under /var/log/radius directory.





On Wed, Apr 30, 2014 at 2:29 PM, Alan DeKok <aland at deployingradius.com>wrote:

> Khapare Joshi wrote:
> > I have following file in my /var/log/radius/radacct/192.168.1.1
> > directory
>
>   That doesn't matter.  Those are AUTHENTICATION packets.
> Authentication is not accounting.
>
> > if Packet-Type=Accept-Request is not accounting packets then Packet-Type
> > = Access-Accept must the one or not ?
>
>   No.  That's a reply to an Access-Request.
>
>   It helps to understand a little bit about RADIUS.
>
> > if Packet-Type = Access-Accept
> > then why it is not creating those file so that I can use the
> > Simultaneous-Use := 2 for users.
>
>   I have no idea what that means.
>
>   Make the NAS send Accounting-Request packets.
>
>   NOTHING else will work.  There is NOTHING you can do to FreeRADIUS to
> make it work.  You MUST change the configuration on the NAS.
>
>   Alan DeKok.
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20140502/0d1faf6f/attachment.html>