Issues getting SLES11 FreeRadius working with eDirectory

[Brian Boere]

Chris, I have added the "edir = yes" (also found some information about also adding edir_autz = yes) and it did not make a difference. 

Unfortunately it did not make a difference. 

I am going to set things back to a clean install and try again. 

LDAP is set to port to port 636 in the ldap modules as well. 
 
Any other suggestions? 

Thanks in advance. 

Brian 

>>> "Teague, Christopher J." <Chris.Teague at mybrighthouse.com> 4/9/2015 07:31 AM >>>
Hi Brian,

If you are using FR to proxy off authentication requests to ESD you'll want to look at using the Universal Password plugin (feature of eDirectory) and then configure FR to use NMAS to connect to your eDirectory instance.

Within ldap configuration, look for:

#  Set to yes if you have eDirectory and want to use the universal
        #  password mechanism.
        edir = yes

Modify the port you connect to eDirectory if needed (I've seen 636 used in the past).

This will permit FR to obtain the cleartext password from eDirectory so the MS-CHAPv2 one way has can be compared against what the 802.1x EAP client is sending.

Right now the user is sending the one way hash and you do not have anything to compare it to on the directory side.

Chris Teague

-----Original Message-----
From: Freeradius-Users [mailto:freeradius-users-bounces+chris.teague=mybrighthouse.com at lists.freeradius.org] On Behalf Of Brian Boere
Sent: Wednesday, April 08, 2015 9:49 PM
To: Freeradius-Users at lists.freeradius.org
Subject: Issues getting SLES11 FreeRadius working with eDirectory


We have a SLES10 SP4 server with freeradius (version 1.1.7-21.8.39 according to YAST2) working with eDirectory.  We have it set so that if a user is not a member of an eDirectory group, they cannot get connected to the wireless AP.  We are wanting to add a second wireless network and have authentication work if the NAS-ID and eDirectory groups are a specific match.  We have done some reading and found that it is supposed to be easier to accomplish this using FreeRadius version 2.  So we now have a SLES11SP3 server configured with Freeradius (version 2.1.1-7.18.1 according to YAST2).  When using radtest, the LDAP requests all seem to go through properly.  (if not a member of the edir group, get a message that the user is not allowed to connect, if member of the edir group, get a successful connection message).  When we try to connect with a wireless device, we get prompted for the username/password and get the option to accept the security certificates.  The device will not connect.  We have rebuilt the freeradius on the SLES10 server several times and can get it to work each time without issues.  We have made the same configuration changes on the SLES11 server, and cannot get it to connect.  (we are obviously missing something, but cannot find it)

This is the radiusd -X log:

FreeRADIUS Version 2.1.1, for host x86_64-suse-linux-gnu, built on Feb 28 2014 at 23:17:30
Copyright (C) 1999-2008 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/modules/
including configuration file /etc/raddb/modules/detail.log
including configuration file /etc/raddb/modules/krb5
including configuration file /etc/raddb/modules/passwd
including configuration file /etc/raddb/modules/digest
including configuration file /etc/raddb/modules/policy
including configuration file /etc/raddb/modules/attr_filter
including configuration file /etc/raddb/modules/echo
including configuration file /etc/raddb/modules/radutmp
including configuration file /etc/raddb/modules/ldap
including configuration file /etc/raddb/modules/counter
including configuration file /etc/raddb/modules/pam
including configuration file /etc/raddb/modules/realm
including configuration file /etc/raddb/modules/preprocess
including configuration file /etc/raddb/modules/always
including configuration file /etc/raddb/modules/expr
including configuration file /etc/raddb/modules/unix
including configuration file /etc/raddb/modules/attr_rewrite
including configuration file /etc/raddb/modules/expiration
including configuration file /etc/raddb/modules/mac2vlan
including configuration file /etc/raddb/modules/mac2ip
including configuration file /etc/raddb/modules/etc_group
including configuration file /etc/raddb/modules/pap
including configuration file /etc/raddb/modules/chap
including configuration file /etc/raddb/modules/sql_log
including configuration file /etc/raddb/modules/smbpasswd
including configuration file /etc/raddb/modules/exec
including configuration file /etc/raddb/modules/logintime
including configuration file /etc/raddb/modules/linelog
including configuration file /etc/raddb/modules/mschap
including configuration file /etc/raddb/modules/acct_unique
including configuration file /etc/raddb/modules/inner-eap
including configuration file /etc/raddb/modules/detail
including configuration file /etc/raddb/modules/wimax
including configuration file /etc/raddb/modules/files
including configuration file /etc/raddb/modules/detail.example.com
including configuration file /etc/raddb/modules/ippool
including configuration file /etc/raddb/modules/sradutmp
including configuration file /etc/raddb/modules/checkval
including configuration file /etc/raddb/eap.conf
including configuration file /etc/raddb/sql.conf
including configuration file /etc/raddb/sql/mysql/dialup.conf
including configuration file /etc/raddb/sql/mysql/counter.conf
including configuration file /etc/raddb/policy.conf
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
group = radiusd
user = radiusd
including dictionary file /etc/raddb/dictionary
main {
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/radius"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
allow_core_dumps = no
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
nastype = "other"
}
client 192.168.1.53 {
require_message_authenticator = no
secret = "sophos123"
shortname = "RadiusServer"
}
client 192.168.1.1 {
require_message_authenticator = no
secret = "sophos123"
shortname = "SophosAppliance"
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating exec
  exec {
wait = no
input_pairs = "request"
shell_escape = yes
  }
Module: Linked to module rlm_expr
Module: Instantiating expr
Module: Linked to module rlm_expiration
Module: Instantiating expiration
  expiration {
reply-message = "Password Has Expired  "
  }
Module: Linked to module rlm_logintime
Module: Instantiating logintime
  logintime {
reply-message = "You are calling outside your allowed timespan  "
minimum-timeout = 60
  }
}
radiusd: #### Loading Virtual Servers ####
server inner-tunnel {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating pap
  pap {
encryption_scheme = "auto"
auto_header = no
  }
Module: Linked to module rlm_chap
Module: Instantiating chap
Module: Linked to module rlm_mschap
Module: Instantiating mschap
  mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
  }
Module: Linked to module rlm_unix
Module: Instantiating unix
  unix {
radwtmp = "/var/log/radius/radwtmp"
  }
Module: Linked to module rlm_eap
Module: Instantiating eap
  eap {
default_eap_type = "peap"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 2048
  }
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
   gtc {
challenge = "Password: "
auth_type = "PAP"
   }
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
   tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
pem_file_type = yes
private_key_file = "/etc/raddb/certs/servercert.pem"
certificate_file = "/etc/raddb/certs/servercert.pem"
CA_file = "/etc/raddb/certs/rootcert.pem"
private_key_password = "Donkey01"
dh_file = "/etc/raddb/certs/dh"
random_file = "/etc/raddb/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/etc/raddb/certs/bootstrap"
    cache {
enable = no
lifetime = 24
max_entries = 255
    }
   }
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
   ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
   }
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
   peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
   }
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
   mschapv2 {
with_ntdomain_hack = no
   }
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_realm
Module: Instantiating suffix
  realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
  }
Module: Linked to module rlm_files
Module: Instantiating files
  files {
usersfile = "/etc/raddb/users"
acctusersfile = "/etc/raddb/acct_users"
preproxy_usersfile = "/etc/raddb/preproxy_users"
compat = "no"
  }
Module: Checking session {...} for more modules to load
Module: Linked to module rlm_radutmp
Module: Instantiating radutmp
  radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
  }
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Linked to module rlm_attr_filter
Module: Instantiating attr_filter.access_reject
  attr_filter attr_filter.access_reject {
attrsfile = "/etc/raddb/attrs.access_reject"
key = "%{User-Name}"
  }
}
}
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_ldap
Module: Instantiating ldap
  ldap {
server = "192.168.1.14"
port = 389
password = "chevy01"
identity = "cn=brian,ou=ou,o=org"
net_timeout = 1
timeout = 4
timelimit = 3
tls_mode = no
start_tls = no
tls_require_cert = "allow"
   tls {
start_tls = no
require_cert = "allow"
   }
basedn = "ou=ou,o=org"
filter = "(uid=%{Stripped-User-Name:-%{User-Name}})"
base_filter = "(objectclass=radiusprofile)"
password_attribute = "npsmPassword"
auto_header = no
access_attr_used_for_allow = no
groupname_attribute = "cn"
groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
dictionary_mapping = "/etc/raddb/ldap.attrmap"
ldap_debug = 0
ldap_connections_number = 5
compare_check_items = no
do_xlat = yes
edir_account_policy_check = no
set_auth_type = yes
  }
rlm_ldap: Registering ldap_groupcmp for Ldap-Group
rlm_ldap: Registering ldap_xlat with xlat_name ldap
rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap
rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password
rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address
rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
rlm_ldap: LDAP radiusClass mapped to RADIUS Class
rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link
rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network
rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone
rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message
conns: 0x7f249ba1b300
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating preprocess
  preprocess {
huntgroups = "/etc/raddb/huntgroups"
hints = "/etc/raddb/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
  }
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating acct_unique
  acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
  }
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating detail
  detail {
detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
  }
Module: Instantiating attr_filter.accounting_response
  attr_filter attr_filter.accounting_response {
attrsfile = "/etc/raddb/attrs.accounting_response"
key = "%{User-Name}"
  }
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
}
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=84, length=162
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 0x0201000c016d617269737361
Message-Authenticator = 0x2d290123d7e9601ba913c48682a80b59
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 12
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
rlm_ldap: Entering ldap_groupcmp()
[files] expand: ou=ou,o=org -> ou=ou,o=org
[files] WARNING: Deprecated conditional expansion ":-".  See "man unlang" for details
[files] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa)
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: attempting LDAP reconnection
rlm_ldap: (re)connect to 192.168.1.14:389, authentication 0
rlm_ldap: bind as cn=brian,ou=ou,o=org/chevy01 to 192.168.1.14:389
rlm_ldap: waiting for bind result ...
rlm_ldap: Bind was successful
rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa)
rlm_ldap: ldap_release_conn: Release Id: 0
[files] expand: (|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=)))
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in cn=Corporate Wireless Network,ou=ou,o=org, with filter (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=)))
rlm_ldap::ldap_groupcmp: User found in group cn=Corporate Wireless Network,ou=ou,o=org
rlm_ldap: ldap_release_conn: Release Id: 0
[files] users: Matched entry DEFAULT at line 3
++[files] returns ok
[ldap] performing user authorization for marissa
[ldap] WARNING: Deprecated conditional expansion ":-".  See "man unlang" for details
[ldap] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa)
[ldap] expand: ou=ou,o=org -> ou=ou,o=org
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
[ldap] looking for reply items in directory...
WARNING: No "known good" password was found in LDAP.  Are you sure that the user is configured correctly?
[ldap] user marissa authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user.  Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 84 to 192.168.1.1 port 44783
Reply-Message = "You have been authenticated"
EAP-Message = 0x010200061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xd9001cbcd902052adaeb377365c8c185
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=85, length=320
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 0x0202009819800000008e16030100890100008503015525d4b72ee5a48517ff521fd6cf39ee30e6874ec5f58dda752e7aadedfe2fcc00004a00ffc024c023c00ac009c007c008c028c027c014c013c011c012c026c025c02ac029c005c004c002c003c00fc00ec00cc00d003d003c002f000500040035000a0067006b00330039001601000012000a00080006001700180019000b00020100
State = 0xd9001cbcd902052adaeb377365c8c185
Message-Authenticator = 0x758edab72cfda72bd82f0c28d4259c98
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 152
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
  TLS Length 142
[peap] Length Included
[peap] eaptls_verify returned 11
[peap]     (other): before/accept initialization
[peap]     TLS_accept: before/accept initialization
[peap] <<< TLS 1.0 Handshake [length 0089], ClientHello
[peap]     TLS_accept: SSLv3 read client hello A
[peap] >>> TLS 1.0 Handshake [length 0031], ServerHello
[peap]     TLS_accept: SSLv3 write server hello A
[peap] >>> TLS 1.0 Handshake [length 08e7], Certificate
[peap]     TLS_accept: SSLv3 write certificate A
[peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
[peap]     TLS_accept: SSLv3 write server done A
[peap]     TLS_accept: SSLv3 flush data
[peap]     TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 85 to 192.168.1.1 port 44783
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 0xd4a2661ca156a4543052310b3009060355040613025553311f301d06035504031316596153542044656661756c7420434120286d657461293122302006092a864886f70d0109011613706f73746d617374657240626f6572652e6361820900e50dd4f472f2f48730210603551d11041a30188116627269616e2e626f657265406e657477697a652e6361301e0603551d12041730158113706f73746d617374657240626f6572652e6361300d06092a864886f70d01010505000382010100c7ba58711c8eea196acfca564db95105ead4310ad9c37af7344fb9654f61e163f8dd40c0a7ea491cff85494dc8ef5d2c92c4f7b72415018169d8d3ce56037a
EAP-Message = 0xc58044f3ddec6c0e7f82e084
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xd9001cbcd803052adaeb377365c8c185
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=86, length=174
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 0x020300061900
State = 0xd9001cbcd803052adaeb377365c8c185
Message-Authenticator = 0x3a716f65614e706af1f54a3a8174f9cc
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 3 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 86 to 192.168.1.1 port 44783
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 0x7240626f6572652e
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xd9001cbcdb04052adaeb377365c8c185
Finished request 2.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=87, length=174
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 0x020400061900
State = 0xd9001cbcdb04052adaeb377365c8c185
Message-Authenticator = 0x44e85cf35b2652aeff56bfcd1b16c5cd
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 4 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 87 to 192.168.1.1 port 44783
EAP-Message = 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
EAP-Message = 0xb0c10bdf7d58306a9b62f457869be27e0500f12bb5bdbf451afcd037f43bd26db19169f9fd88a6ab8f49783d3718a97908838502011a8b6cfea38002e6929816030100040e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xd9001cbcda05052adaeb377365c8c185
Finished request 3.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=88, length=506
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 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
EAP-Message = 0x14b7bbb48647fb9fdc5fd14e51c44d615ec192713ae3fb021403010001011603010030b5f1af276c5e2fc65e0d3cf690ac2b86b52c39a92aad5202f9eca964e1dcacd02856d7628617f4b10e7f4e68175e3599
State = 0xd9001cbcda05052adaeb377365c8c185
Message-Authenticator = 0x073c9d8ac8cc325748672451ed420003
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 5 length 253
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
  TLS Length 326
[peap] Length Included
[peap] eaptls_verify returned 11
[peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange
[peap]     TLS_accept: SSLv3 read client key exchange A
[peap] <<< TLS 1.0 ChangeCipherSpec [length 0001]
[peap] <<< TLS 1.0 Handshake [length 0010], Finished
[peap]     TLS_accept: SSLv3 read finished A
[peap] >>> TLS 1.0 ChangeCipherSpec [length 0001]
[peap]     TLS_accept: SSLv3 write change cipher spec A
[peap] >>> TLS 1.0 Handshake [length 0010], Finished
[peap]     TLS_accept: SSLv3 write finished A
[peap]     TLS_accept: SSLv3 flush data
[peap]     (other): SSL negotiation finished successfully
SSL Connection Established
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 88 to 192.168.1.1 port 44783
EAP-Message = 0x01060041190014030100010116030100304fb3adbe14355ec984ad62752e83470eff341ddf8cd09b7f24f9af73977020a400b89fd96b88d3cebe11c4e853c8d67a
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xd9001cbcdd06052adaeb377365c8c185
Finished request 4.
Going to the next request
Waking up in 4.8 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=89, length=174
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 0x020600061900
State = 0xd9001cbcdd06052adaeb377365c8c185
Message-Authenticator = 0x4887f74174bf5b3756f3a3d023191da0
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 6 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake is finished
[peap] eaptls_verify returned 3
[peap] eaptls_process returned 3
[peap] EAPTLS_SUCCESS
++[eap] returns handled
Sending Access-Challenge of id 89 to 192.168.1.1 port 44783
EAP-Message = 0x0107002b190017030100206b27502b3a646f9fdb694ce16590e60c23995ea191e5a23adcb4b2659fdf3cf6
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xd9001cbcdc07052adaeb377365c8c185
Finished request 5.
Going to the next request
Waking up in 4.8 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=90, length=211
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 0x0207002b19001703010020d55d342c1b1bd4c455b0062ad55ff3f7ae5ad1db215f7e324ea3d8ed7ed58daa
State = 0xd9001cbcdc07052adaeb377365c8c185
Message-Authenticator = 0x10d5b34de8fb14107b2dccab6e94272e
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 7 length 43
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7
[peap] Done initial handshake
[peap] eaptls_process returned 7
[peap] EAPTLS_OK
[peap] Session established.  Decoding tunneled attributes.
[peap] Identity - marissa
[peap] Got tunnled request
EAP-Message = 0x0207000c016d617269737361
server (null) {
  PEAP: Got tunneled identity of marissa
  PEAP: Setting default EAP type for tunneled EAP session.
  PEAP: Setting User-Name to marissa
Sending tunneled request
EAP-Message = 0x0207000c016d617269737361
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = "marissa"
server inner-tunnel {
+- entering group authorize {...}
++[chap] returns noop
++[mschap] returns noop
++[unix] returns notfound
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[control] returns noop
[eap] EAP packet type response id 7 length 12
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
rlm_ldap: Entering ldap_groupcmp()
[files] expand: ou=ou,o=org -> ou=ou,o=org
[files] WARNING: Deprecated conditional expansion ":-".  See "man unlang" for details
[files] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa)
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa)
rlm_ldap: ldap_release_conn: Release Id: 0
[files] expand: (|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=)))
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in cn=Corporate Wireless Network,ou=ou,o=org, with filter (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=)))
rlm_ldap::ldap_groupcmp: User found in group cn=Corporate Wireless Network,ou=ou,o=org
rlm_ldap: ldap_release_conn: Release Id: 0
[files] users: Matched entry DEFAULT at line 3
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type mschapv2
rlm_eap_mschapv2: Issuing Challenge
++[eap] returns handled
} # server inner-tunnel
[peap] Got tunneled reply code 11
Auth-Type := Accept
Reply-Message = "You have been authenticated"
EAP-Message = 0x010800211a0108001c104c7d6d16e4d3682db039701272ef79586d617269737361
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x27b4133127bc09524480fddc531df9e5
[peap] Got tunneled reply RADIUS code 11
Auth-Type := Accept
Reply-Message = "You have been authenticated"
EAP-Message = 0x010800211a0108001c104c7d6d16e4d3682db039701272ef79586d617269737361
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x27b4133127bc09524480fddc531df9e5
[peap] Got tunneled Access-Challenge
++[eap] returns handled
Sending Access-Challenge of id 90 to 192.168.1.1 port 44783
EAP-Message = 0x0108004b19001703010040427a79bc52032f8dd9260e9b8fae5b50244fcf98c6d97c541103fd3249fb44c1cd8abec69572b2df56644dcba630c48d050b553de594c04b9aa47148186a2115
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xd9001cbcdf08052adaeb377365c8c185
Finished request 6.
Going to the next request
Waking up in 4.8 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=91, length=275
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 0x0208006b19001703010060d05f0b2f7e1f68309679d43d8cf9d1ceaed585bc13d0f63327ce85dac120ae511c1262a39b1fb943d74aecae5bd9d9e142c2aa07d7f797097d69ff84594adedff500bdfdf178fbf63ba0e36aa9b9ed184f62a489f942c9f4a4ac7a9f572c591b
State = 0xd9001cbcdf08052adaeb377365c8c185
Message-Authenticator = 0x8cc456db98d3e8de5e271ac3582ceec3
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 8 length 107
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7
[peap] Done initial handshake
[peap] eaptls_process returned 7
[peap] EAPTLS_OK
[peap] Session established.  Decoding tunneled attributes.
[peap] EAP type mschapv2
[peap] Got tunnled request
EAP-Message = 0x020800421a0208003d31bdd42b430d7fae3f0e51831ffaa272510000000000000000f62747d73832a3ebd653e6f008a1b58c0c6b0c64ceb8c78a006d617269737361
server (null) {
  PEAP: Setting User-Name to marissa
Sending tunneled request
EAP-Message = 0x020800421a0208003d31bdd42b430d7fae3f0e51831ffaa272510000000000000000f62747d73832a3ebd653e6f008a1b58c0c6b0c64ceb8c78a006d617269737361
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = "marissa"
State = 0x27b4133127bc09524480fddc531df9e5
server inner-tunnel {
+- entering group authorize {...}
++[chap] returns noop
++[mschap] returns noop
++[unix] returns notfound
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[control] returns noop
[eap] EAP packet type response id 8 length 66
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
rlm_ldap: Entering ldap_groupcmp()
[files] expand: ou=ou,o=org -> ou=ou,o=org
[files] WARNING: Deprecated conditional expansion ":-".  See "man unlang" for details
[files] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa)
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa)
rlm_ldap: ldap_release_conn: Release Id: 0
[files] expand: (|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=)))
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in cn=Corporate Wireless Network,ou=ou,o=org, with filter (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=)))
rlm_ldap::ldap_groupcmp: User found in group cn=Corporate Wireless Network,ou=ou,o=org
rlm_ldap: ldap_release_conn: Release Id: 0
[files] users: Matched entry DEFAULT at line 3
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/mschapv2
[eap] processing type mschapv2
[mschapv2] +- entering group MS-CHAP {...}
[mschap] No Cleartext-Password configured.  Cannot create LM-Password.
[mschap] No Cleartext-Password configured.  Cannot create NT-Password.
[mschap] Told to do MS-CHAPv2 for marissa with NT-Password
[mschap] FAILED: No NT/LM-Password.  Cannot perform authentication.
[mschap] FAILED: MS-CHAP2-Response is incorrect
++[mschap] returns reject
[eap] Freeing handler
++[eap] returns reject
Failed to authenticate the user.
} # server inner-tunnel
[peap] Got tunneled reply code 3
Auth-Type := Accept
Reply-Message = "You have been authenticated"
MS-CHAP-Error = "\010E=691 R=1"
EAP-Message = 0x04080004
Message-Authenticator = 0x00000000000000000000000000000000
[peap] Got tunneled reply RADIUS code 3
Auth-Type := Accept
Reply-Message = "You have been authenticated"
MS-CHAP-Error = "\010E=691 R=1"
EAP-Message = 0x04080004
Message-Authenticator = 0x00000000000000000000000000000000
[peap] Tunneled authentication was rejected.
[peap] FAILURE
++[eap] returns handled
Sending Access-Challenge of id 91 to 192.168.1.1 port 44783
EAP-Message = 0x0109002b190017030100202666e0fc4864bb1b4246ae2666c3c8a332996c8be347fc9e75497ad0ac439649
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xd9001cbcde09052adaeb377365c8c185
Finished request 7.
Going to the next request
Waking up in 4.8 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=92, length=211
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 0x0209002b19001703010020c1e2322db45a1fb3a71d66f3753f631f70928867ac73dd0e81236fb5a29d98cd
State = 0xd9001cbcde09052adaeb377365c8c185
Message-Authenticator = 0xac4310fef08997338b69f8b5899758ec
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 9 length 43
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7
[peap] Done initial handshake
[peap] eaptls_process returned 7
[peap] EAPTLS_OK
[peap] Session established.  Decoding tunneled attributes.
[peap] Received EAP-TLV response.
[peap]  Had sent TLV failure.  User was rejected earlier in this session.
[eap] Handler failed in EAP/peap
[eap] Failed in EAP select
++[eap] returns invalid
Failed to authenticate the user.
Using Post-Auth-Type Reject
+- entering group REJECT {...}
++[ldap] returns noop
Delaying reject of request 8 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 8
Sending Access-Reject of id 92 to 192.168.1.1 port 44783
EAP-Message = 0x04090004
Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.8 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=93, length=162
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 0x02d4000c016d617269737361
Message-Authenticator = 0x5f3439e62d108fe4ec3453c944345f1d
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 212 length 12
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
rlm_ldap: Entering ldap_groupcmp()
[files] expand: ou=ou,o=org -> ou=ou,o=org
[files] WARNING: Deprecated conditional expansion ":-".  See "man unlang" for details
[files] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa)
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa)
rlm_ldap: ldap_release_conn: Release Id: 0
[files] expand: (|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=)))
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in cn=Corporate Wireless Network,ou=ou,o=org, with filter (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=)))
rlm_ldap::ldap_groupcmp: User found in group cn=Corporate Wireless Network,ou=ou,o=org
rlm_ldap: ldap_release_conn: Release Id: 0
[files] users: Matched entry DEFAULT at line 3
++[files] returns ok
[ldap] performing user authorization for marissa
[ldap] WARNING: Deprecated conditional expansion ":-".  See "man unlang" for details
[ldap] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa)
[ldap] expand: ou=ou,o=org -> ou=ou,o=org
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
[ldap] looking for reply items in directory...
WARNING: No "known good" password was found in LDAP.  Are you sure that the user is configured correctly?
[ldap] user marissa authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user.  Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 93 to 192.168.1.1 port 44783
Reply-Message = "You have been authenticated"
EAP-Message = 0x01d500061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x4c79eeeb4cacf7adde98b3784d2ef1bf
Finished request 9.
Going to the next request
Waking up in 3.2 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=94, length=320
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 0x02d5009819800000008e16030100890100008503015525d4b816975f51351d97cfa37244f07191e59fa5ed1467144801e94b0f1d1c00004a00ffc024c023c00ac009c007c008c028c027c014c013c011c012c026c025c02ac029c005c004c002c003c00fc00ec00cc00d003d003c002f000500040035000a0067006b00330039001601000012000a00080006001700180019000b00020100
State = 0x4c79eeeb4cacf7adde98b3784d2ef1bf
Message-Authenticator = 0x23f7a8e56a5b168597d8521d99cff1ba
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 213 length 152
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
  TLS Length 142
[peap] Length Included
[peap] eaptls_verify returned 11
[peap]     (other): before/accept initialization
[peap]     TLS_accept: before/accept initialization
[peap] <<< TLS 1.0 Handshake [length 0089], ClientHello
[peap]     TLS_accept: SSLv3 read client hello A
[peap] >>> TLS 1.0 Handshake [length 0031], ServerHello
[peap]     TLS_accept: SSLv3 write server hello A
[peap] >>> TLS 1.0 Handshake [length 08e7], Certificate
[peap]     TLS_accept: SSLv3 write certificate A
[peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
[peap]     TLS_accept: SSLv3 write server done A
[peap]     TLS_accept: SSLv3 flush data
[peap]     TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 94 to 192.168.1.1 port 44783
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 0xc58044f3ddec6c0e7f82e084
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x4c79eeeb4daff7adde98b3784d2ef1bf
Finished request 10.
Going to the next request
Waking up in 3.1 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=95, length=174
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 0x02d600061900
State = 0x4c79eeeb4daff7adde98b3784d2ef1bf
Message-Authenticator = 0xdf1a34fc2b331ab8223f0914e5a375d9
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 214 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 95 to 192.168.1.1 port 44783
EAP-Message = 0x01d703fc1940a956cdf4a9cd24705f92ea8f1686199f3868bd6e177c8dadcd5b3a7079fd518c87a670431dd50c569a948b9a1c0f02986a7c0c883aafad12cdc2f1f139a98ab551b9249d2f63c53081a6285dc1e4635e4b7b640cbe28cf6cdd5621acc69cddcc62c3e40c956e1bcadac368d4841c82f4ae44a5b4848a61d6dab7edfb9a4e2c9815763f67050f0630db6c25c14e99fa98747c70e53cdfbcef8f92027b7d0ac28782b2bd61b60c98510e0945a193bdd6775a59b205500004743082047030820358a003020102020900e50dd4f472f2f487300d06092a864886f70d01010505003052310b3009060355040613025553311f301d0603550403
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 0x7240626f6572652e
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x4c79eeeb4eaef7adde98b3784d2ef1bf
Finished request 11.
Going to the next request
Waking up in 3.1 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=96, length=174
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 0x02d700061900
State = 0x4c79eeeb4eaef7adde98b3784d2ef1bf
Message-Authenticator = 0x9a063525d73ce28faa24e08ebe285454
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 215 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 96 to 192.168.1.1 port 44783
EAP-Message = 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
EAP-Message = 0xb0c10bdf7d58306a9b62f457869be27e0500f12bb5bdbf451afcd037f43bd26db19169f9fd88a6ab8f49783d3718a97908838502011a8b6cfea38002e6929816030100040e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x4c79eeeb4fa1f7adde98b3784d2ef1bf
Finished request 12.
Going to the next request
Waking up in 3.0 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=97, length=506
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 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
EAP-Message = 0xef0c4af27d967df6c3f56b6f5f475f30e7cff3eac9bed619140301000101160301003086a05537342a365768b7f6212c3ce5ae62ce6e98479b102d725020f94a3642a5165ac932c6db50f6af86ea4da31b42c2
State = 0x4c79eeeb4fa1f7adde98b3784d2ef1bf
Message-Authenticator = 0xf9074324e9c31069cf37be2a2c38922d
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 216 length 253
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
  TLS Length 326
[peap] Length Included
[peap] eaptls_verify returned 11
[peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange
[peap]     TLS_accept: SSLv3 read client key exchange A
[peap] <<< TLS 1.0 ChangeCipherSpec [length 0001]
[peap] <<< TLS 1.0 Handshake [length 0010], Finished
[peap]     TLS_accept: SSLv3 read finished A
[peap] >>> TLS 1.0 ChangeCipherSpec [length 0001]
[peap]     TLS_accept: SSLv3 write change cipher spec A
[peap] >>> TLS 1.0 Handshake [length 0010], Finished
[peap]     TLS_accept: SSLv3 write finished A
[peap]     TLS_accept: SSLv3 flush data
[peap]     (other): SSL negotiation finished successfully
SSL Connection Established
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 97 to 192.168.1.1 port 44783
EAP-Message = 0x01d9004119001403010001011603010030ec4119debae3083cdaccc8610558ce4a65aeced17553eee9c1ad079e3218daf575314615ea75d1dbb7b837aae7869dc3
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x4c79eeeb48a0f7adde98b3784d2ef1bf
Finished request 13.
Going to the next request
Waking up in 3.0 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=98, length=174
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 0x02d900061900
State = 0x4c79eeeb48a0f7adde98b3784d2ef1bf
Message-Authenticator = 0x5ff41ba10c61525f1d5cffba92e0c93f
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 217 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake is finished
[peap] eaptls_verify returned 3
[peap] eaptls_process returned 3
[peap] EAPTLS_SUCCESS
++[eap] returns handled
Sending Access-Challenge of id 98 to 192.168.1.1 port 44783
EAP-Message = 0x01da002b19001703010020dd5077e04204e1677d2f4683939405977f9cd8bc67ef336b4f8a4cbdf987b309
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x4c79eeeb49a3f7adde98b3784d2ef1bf
Finished request 14.
Going to the next request
Waking up in 3.0 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=99, length=211
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 0x02da002b19001703010020b89f05c9c405c9e43821efc0ff9e872313ecb72139c46527981f9052aea96d0b
State = 0x4c79eeeb49a3f7adde98b3784d2ef1bf
Message-Authenticator = 0x090dd6c63c6d91d836dd845721cc7dd8
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 218 length 43
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7
[peap] Done initial handshake
[peap] eaptls_process returned 7
[peap] EAPTLS_OK
[peap] Session established.  Decoding tunneled attributes.
[peap] Identity - marissa
[peap] Got tunnled request
EAP-Message = 0x02da000c016d617269737361
server (null) {
  PEAP: Got tunneled identity of marissa
  PEAP: Setting default EAP type for tunneled EAP session.
  PEAP: Setting User-Name to marissa
Sending tunneled request
EAP-Message = 0x02da000c016d617269737361
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = "marissa"
server inner-tunnel {
+- entering group authorize {...}
++[chap] returns noop
++[mschap] returns noop
++[unix] returns notfound
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[control] returns noop
[eap] EAP packet type response id 218 length 12
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
rlm_ldap: Entering ldap_groupcmp()
[files] expand: ou=ou,o=org -> ou=ou,o=org
[files] WARNING: Deprecated conditional expansion ":-".  See "man unlang" for details
[files] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa)
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa)
rlm_ldap: ldap_release_conn: Release Id: 0
[files] expand: (|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=)))
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in cn=Corporate Wireless Network,ou=ou,o=org, with filter (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=)))
rlm_ldap::ldap_groupcmp: User found in group cn=Corporate Wireless Network,ou=ou,o=org
rlm_ldap: ldap_release_conn: Release Id: 0
[files] users: Matched entry DEFAULT at line 3
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type mschapv2
rlm_eap_mschapv2: Issuing Challenge
++[eap] returns handled
} # server inner-tunnel
[peap] Got tunneled reply code 11
Auth-Type := Accept
Reply-Message = "You have been authenticated"
EAP-Message = 0x01db00211a01db001c1006f44211bbf1dba43133529c64c2fa9b6d617269737361
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x8a77cf098aacd550855fedefe5b907b1
[peap] Got tunneled reply RADIUS code 11
Auth-Type := Accept
Reply-Message = "You have been authenticated"
EAP-Message = 0x01db00211a01db001c1006f44211bbf1dba43133529c64c2fa9b6d617269737361
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x8a77cf098aacd550855fedefe5b907b1
[peap] Got tunneled Access-Challenge
++[eap] returns handled
Sending Access-Challenge of id 99 to 192.168.1.1 port 44783
EAP-Message = 0x01db004b1900170301004003353bd1e64ee9f527af5b929a2808f15b2dbcc80600b775c63995e0e3ae800f7d1a1a9f15c17f84d2fc249acfc870e313e8d3f46d4ee423e84d4cc6fd07372d
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x4c79eeeb4aa2f7adde98b3784d2ef1bf
Finished request 15.
Going to the next request
Waking up in 3.0 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=100, length=275
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 0x02db006b19001703010060ffa9aac740c65dc12e7a959f296bf340e055a4603f4cbcbde091a2d0820529a0ce5244adcd5122e0ccbbbde47834139aa91365b6105dc989444ca730cd264c9e2366d317f205c5d4bcfcbd7827f73c9ee0f9bb220f69f470f63bfb7c17f42b5d
State = 0x4c79eeeb4aa2f7adde98b3784d2ef1bf
Message-Authenticator = 0x39b6d35b79cb30bbd8ce5cd98c68bdea
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 219 length 107
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7
[peap] Done initial handshake
[peap] eaptls_process returned 7
[peap] EAPTLS_OK
[peap] Session established.  Decoding tunneled attributes.
[peap] EAP type mschapv2
[peap] Got tunnled request
EAP-Message = 0x02db00421a02db003d31098aaae470987c845a9a81acf3bfa4a9000000000000000060997998dc92fde1a889706b2df5c8aea37a97d63644286f006d617269737361
server (null) {
  PEAP: Setting User-Name to marissa
Sending tunneled request
EAP-Message = 0x02db00421a02db003d31098aaae470987c845a9a81acf3bfa4a9000000000000000060997998dc92fde1a889706b2df5c8aea37a97d63644286f006d617269737361
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = "marissa"
State = 0x8a77cf098aacd550855fedefe5b907b1
server inner-tunnel {
+- entering group authorize {...}
++[chap] returns noop
++[mschap] returns noop
++[unix] returns notfound
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[control] returns noop
[eap] EAP packet type response id 219 length 66
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
rlm_ldap: Entering ldap_groupcmp()
[files] expand: ou=ou,o=org -> ou=ou,o=org
[files] WARNING: Deprecated conditional expansion ":-".  See "man unlang" for details
[files] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa)
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa)
rlm_ldap: ldap_release_conn: Release Id: 0
[files] expand: (|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=)))
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in cn=Corporate Wireless Network,ou=ou,o=org, with filter (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=)))
rlm_ldap::ldap_groupcmp: User found in group cn=Corporate Wireless Network,ou=ou,o=org
rlm_ldap: ldap_release_conn: Release Id: 0
[files] users: Matched entry DEFAULT at line 3
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/mschapv2
[eap] processing type mschapv2
[mschapv2] +- entering group MS-CHAP {...}
[mschap] No Cleartext-Password configured.  Cannot create LM-Password.
[mschap] No Cleartext-Password configured.  Cannot create NT-Password.
[mschap] Told to do MS-CHAPv2 for marissa with NT-Password
[mschap] FAILED: No NT/LM-Password.  Cannot perform authentication.
[mschap] FAILED: MS-CHAP2-Response is incorrect
++[mschap] returns reject
[eap] Freeing handler
++[eap] returns reject
Failed to authenticate the user.
} # server inner-tunnel
[peap] Got tunneled reply code 3
Auth-Type := Accept
Reply-Message = "You have been authenticated"
MS-CHAP-Error = "\333E=691 R=1"
EAP-Message = 0x04db0004
Message-Authenticator = 0x00000000000000000000000000000000
[peap] Got tunneled reply RADIUS code 3
Auth-Type := Accept
Reply-Message = "You have been authenticated"
MS-CHAP-Error = "\333E=691 R=1"
EAP-Message = 0x04db0004
Message-Authenticator = 0x00000000000000000000000000000000
[peap] Tunneled authentication was rejected.
[peap] FAILURE
++[eap] returns handled
Sending Access-Challenge of id 100 to 192.168.1.1 port 44783
EAP-Message = 0x01dc002b19001703010020234c8b70f2d7586fee9428c53f96cee4363089b244c5ee64c6d723b5a2dd5ecf
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x4c79eeeb4ba5f7adde98b3784d2ef1bf
Finished request 16.
Going to the next request
Waking up in 3.0 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=101, length=211
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 0x02dc002b190017030100202f8b97f87bcb382c1712e9e0890ad643a45a137be8301c0625a0d28ceaabe601
State = 0x4c79eeeb4ba5f7adde98b3784d2ef1bf
Message-Authenticator = 0xfa1f12d313eb1b4de35053eacef7da9c
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 220 length 43
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7
[peap] Done initial handshake
[peap] eaptls_process returned 7
[peap] EAPTLS_OK
[peap] Session established.  Decoding tunneled attributes.
[peap] Received EAP-TLV response.
[peap]  Had sent TLV failure.  User was rejected earlier in this session.
[eap] Handler failed in EAP/peap
[eap] Failed in EAP select
++[eap] returns invalid
Failed to authenticate the user.
Using Post-Auth-Type Reject
+- entering group REJECT {...}
++[ldap] returns noop
Delaying reject of request 17 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 17
Sending Access-Reject of id 101 to 192.168.1.1 port 44783
EAP-Message = 0x04dc0004
Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 1.9 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=102, length=162
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 0x02ca000c016d617269737361
Message-Authenticator = 0x17a397da00b824abf91a03c74dd89038
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 202 length 12
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
rlm_ldap: Entering ldap_groupcmp()
[files] expand: ou=ou,o=org -> ou=ou,o=org
[files] WARNING: Deprecated conditional expansion ":-".  See "man unlang" for details
[files] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa)
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa)
rlm_ldap: ldap_release_conn: Release Id: 0
[files] expand: (|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=)))
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in cn=Corporate Wireless Network,ou=ou,o=org, with filter (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=)))
rlm_ldap::ldap_groupcmp: User found in group cn=Corporate Wireless Network,ou=ou,o=org
rlm_ldap: ldap_release_conn: Release Id: 0
[files] users: Matched entry DEFAULT at line 3
++[files] returns ok
[ldap] performing user authorization for marissa
[ldap] WARNING: Deprecated conditional expansion ":-".  See "man unlang" for details
[ldap] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa)
[ldap] expand: ou=ou,o=org -> ou=ou,o=org
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
[ldap] looking for reply items in directory...
WARNING: No "known good" password was found in LDAP.  Are you sure that the user is configured correctly?
[ldap] user marissa authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user.  Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 102 to 192.168.1.1 port 44783
Reply-Message = "You have been authenticated"
EAP-Message = 0x01cb00061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xce01e300cecafa33f34fb10b4809c83e
Finished request 18.
Going to the next request
Waking up in 1.3 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=103, length=320
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 0x02cb009819800000008e16030100890100008503015525d4bac1cbb767303f654b33b6628f5e1d6f9da3feec6901403f8ac797492200004a00ffc024c023c00ac009c007c008c028c027c014c013c011c012c026c025c02ac029c005c004c002c003c00fc00ec00cc00d003d003c002f000500040035000a0067006b00330039001601000012000a00080006001700180019000b00020100
State = 0xce01e300cecafa33f34fb10b4809c83e
Message-Authenticator = 0x83d4a6de2f42960ab429de7f4d5f37f0
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 203 length 152
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
  TLS Length 142
[peap] Length Included
[peap] eaptls_verify returned 11
[peap]     (other): before/accept initialization
[peap]     TLS_accept: before/accept initialization
[peap] <<< TLS 1.0 Handshake [length 0089], ClientHello
[peap]     TLS_accept: SSLv3 read client hello A
[peap] >>> TLS 1.0 Handshake [length 0031], ServerHello
[peap]     TLS_accept: SSLv3 write server hello A
[peap] >>> TLS 1.0 Handshake [length 08e7], Certificate
[peap]     TLS_accept: SSLv3 write certificate A
[peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
[peap]     TLS_accept: SSLv3 write server done A
[peap]     TLS_accept: SSLv3 flush data
[peap]     TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 103 to 192.168.1.1 port 44783
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 0xc58044f3ddec6c0e7f82e084
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xce01e300cfcdfa33f34fb10b4809c83e
Finished request 19.
Going to the next request
Waking up in 1.2 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=104, length=174
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 0x02cc00061900
State = 0xce01e300cfcdfa33f34fb10b4809c83e
Message-Authenticator = 0x0b3eb60b88e4d1d362aec3f7a641de5b
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 204 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 104 to 192.168.1.1 port 44783
EAP-Message = 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
EAP-Message = 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
EAP-Message = 0xb0357442f27c4c8f2814c431ec73c113495df8d45b02e5b7f85fad4a7002c7b0b0af231aeac352ca77523e7584d1e9ec054922f7832028a1495d7fe8da706acd02cb1b895809c66694ea348791ee02df574c6f8766cf4e7013621d2807f5c817c214322b0ff9a7b890198a5e75251a7b48ac45091bcd7d38a6909fc80aa1113c112652c2bcc6f5076ab36fdf10a1bd421096f1b287e85aa6d7de478b8d87367cb3c7d0597d0536ec0022cda8827faada475509e341b2ef7013d7b4cf0fd9f314072c2ea60a339281c374853c84b2cdb7360c2f3d0203010001a382014730820143300f0603551d130101ff040530030101ff302c06096086480186f842
EAP-Message = 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
EAP-Message = 0x7240626f6572652e
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xce01e300ccccfa33f34fb10b4809c83e
Finished request 20.
Going to the next request
Waking up in 1.2 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=105, length=174
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 0x02cd00061900
State = 0xce01e300ccccfa33f34fb10b4809c83e
Message-Authenticator = 0xa43397ec7d12fe2a77126ad2442ed7e6
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 205 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 105 to 192.168.1.1 port 44783
EAP-Message = 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
EAP-Message = 0xb0c10bdf7d58306a9b62f457869be27e0500f12bb5bdbf451afcd037f43bd26db19169f9fd88a6ab8f49783d3718a97908838502011a8b6cfea38002e6929816030100040e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xce01e300cdcffa33f34fb10b4809c83e
Finished request 21.
Going to the next request
Waking up in 1.2 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=106, length=506
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 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
EAP-Message = 0x62bd37a94346cb02cf58db7ea00775cf22ac9c331dd4c5ee14030100010116030100305eadf915572979dcefd54005f2ea04446726c3694c1a6be20388a55f136d672c0c1ff3968d428a054c0d3aa6e069c437
State = 0xce01e300cdcffa33f34fb10b4809c83e
Message-Authenticator = 0xc07f3a03ca86b7c21c832cde6ca90e8d
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 206 length 253
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
  TLS Length 326
[peap] Length Included
[peap] eaptls_verify returned 11
[peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange
[peap]     TLS_accept: SSLv3 read client key exchange A
[peap] <<< TLS 1.0 ChangeCipherSpec [length 0001]
[peap] <<< TLS 1.0 Handshake [length 0010], Finished
[peap]     TLS_accept: SSLv3 read finished A
[peap] >>> TLS 1.0 ChangeCipherSpec [length 0001]
[peap]     TLS_accept: SSLv3 write change cipher spec A
[peap] >>> TLS 1.0 Handshake [length 0010], Finished
[peap]     TLS_accept: SSLv3 write finished A
[peap]     TLS_accept: SSLv3 flush data
[peap]     (other): SSL negotiation finished successfully
SSL Connection Established
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 106 to 192.168.1.1 port 44783
EAP-Message = 0x01cf0041190014030100010116030100304829c62351e52bd5b670e2e03a108171f2c5bdc558cad7a56725a29123a7a78d42b88dbfe07cdabd7d35c55877119632
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xce01e300cacefa33f34fb10b4809c83e
Finished request 22.
Going to the next request
Waking up in 1.1 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=107, length=174
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 0x02cf00061900
State = 0xce01e300cacefa33f34fb10b4809c83e
Message-Authenticator = 0x5fb219c59a70c0761ef3a113ad774769
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 207 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake is finished
[peap] eaptls_verify returned 3
[peap] eaptls_process returned 3
[peap] EAPTLS_SUCCESS
++[eap] returns handled
Sending Access-Challenge of id 107 to 192.168.1.1 port 44783
EAP-Message = 0x01d0002b190017030100205acfab8e6c9de1d4cf1483baa3a17ae2b91fc3fd594b975d8652c887f20e2781
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xce01e300cbd1fa33f34fb10b4809c83e
Finished request 23.
Going to the next request
Waking up in 1.1 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=108, length=211
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 0x02d0002b19001703010020fd32a4e904d2d88881091407ce432248a586e6ead8e8560d9ce6fb4b97c772b8
State = 0xce01e300cbd1fa33f34fb10b4809c83e
Message-Authenticator = 0xa1a3ed181082aa170dad26734174fab8
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 208 length 43
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7
[peap] Done initial handshake
[peap] eaptls_process returned 7
[peap] EAPTLS_OK
[peap] Session established.  Decoding tunneled attributes.
[peap] Identity - marissa
[peap] Got tunnled request
EAP-Message = 0x02d0000c016d617269737361
server (null) {
  PEAP: Got tunneled identity of marissa
  PEAP: Setting default EAP type for tunneled EAP session.
  PEAP: Setting User-Name to marissa
Sending tunneled request
EAP-Message = 0x02d0000c016d617269737361
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = "marissa"
server inner-tunnel {
+- entering group authorize {...}
++[chap] returns noop
++[mschap] returns noop
++[unix] returns notfound
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[control] returns noop
[eap] EAP packet type response id 208 length 12
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
rlm_ldap: Entering ldap_groupcmp()
[files] expand: ou=ou,o=org -> ou=ou,o=org
[files] WARNING: Deprecated conditional expansion ":-".  See "man unlang" for details
[files] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa)
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa)
rlm_ldap: ldap_release_conn: Release Id: 0
[files] expand: (|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=)))
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in cn=Corporate Wireless Network,ou=ou,o=org, with filter (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=)))
rlm_ldap::ldap_groupcmp: User found in group cn=Corporate Wireless Network,ou=ou,o=org
rlm_ldap: ldap_release_conn: Release Id: 0
[files] users: Matched entry DEFAULT at line 3
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type mschapv2
rlm_eap_mschapv2: Issuing Challenge
++[eap] returns handled
} # server inner-tunnel
[peap] Got tunneled reply code 11
Auth-Type := Accept
Reply-Message = "You have been authenticated"
EAP-Message = 0x01d100211a01d1001c1023c4e56ce6cc92f8aceaf35ee03427d86d617269737361
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x745bf08c748aeaf7fc586b32e6203876
[peap] Got tunneled reply RADIUS code 11
Auth-Type := Accept
Reply-Message = "You have been authenticated"
EAP-Message = 0x01d100211a01d1001c1023c4e56ce6cc92f8aceaf35ee03427d86d617269737361
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x745bf08c748aeaf7fc586b32e6203876
[peap] Got tunneled Access-Challenge
++[eap] returns handled
Sending Access-Challenge of id 108 to 192.168.1.1 port 44783
EAP-Message = 0x01d1004b19001703010040cd91b35cfabec35d0462d201122bb2e93741775304b16d9a1d6dac65ec3a029c5be6f0b29dd0e86ca14c8c9aa741cd34b623044ca95c629aaab8816b1dbc5852
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xce01e300c8d0fa33f34fb10b4809c83e
Finished request 24.
Going to the next request
Waking up in 1.1 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=109, length=275
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 0x02d1006b190017030100609a897b8987754b09e81aca14dc9a9098640b9a05cbe31d4b99129bb7fb016b9a816db212d1d9800a1a525c01ab6ef3966e1b38f67ca89b1aa9f89412098a8616c6b3cb940148033cc11a17f48a55ebbca06bf3e7f26c33da48eb0279388697ed
State = 0xce01e300c8d0fa33f34fb10b4809c83e
Message-Authenticator = 0xc8f3bd2fdbda518d59ba9c1f7d7ccd67
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 209 length 107
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7
[peap] Done initial handshake
[peap] eaptls_process returned 7
[peap] EAPTLS_OK
[peap] Session established.  Decoding tunneled attributes.
[peap] EAP type mschapv2
[peap] Got tunnled request
EAP-Message = 0x02d100421a02d1003d3154c095501f5720d0dae982b518982a9a000000000000000085b48dcd56edca08a085b3fd1dfb05d6a544625d5db0ee00006d617269737361
server (null) {
  PEAP: Setting User-Name to marissa
Sending tunneled request
EAP-Message = 0x02d100421a02d1003d3154c095501f5720d0dae982b518982a9a000000000000000085b48dcd56edca08a085b3fd1dfb05d6a544625d5db0ee00006d617269737361
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = "marissa"
State = 0x745bf08c748aeaf7fc586b32e6203876
server inner-tunnel {
+- entering group authorize {...}
++[chap] returns noop
++[mschap] returns noop
++[unix] returns notfound
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[control] returns noop
[eap] EAP packet type response id 209 length 66
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
rlm_ldap: Entering ldap_groupcmp()
[files] expand: ou=ou,o=org -> ou=ou,o=org
[files] WARNING: Deprecated conditional expansion ":-".  See "man unlang" for details
[files] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa)
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa)
rlm_ldap: ldap_release_conn: Release Id: 0
[files] expand: (|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=)))
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in cn=Corporate Wireless Network,ou=ou,o=org, with filter (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=)))
rlm_ldap::ldap_groupcmp: User found in group cn=Corporate Wireless Network,ou=ou,o=org
rlm_ldap: ldap_release_conn: Release Id: 0
[files] users: Matched entry DEFAULT at line 3
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/mschapv2
[eap] processing type mschapv2
[mschapv2] +- entering group MS-CHAP {...}
[mschap] No Cleartext-Password configured.  Cannot create LM-Password.
[mschap] No Cleartext-Password configured.  Cannot create NT-Password.
[mschap] Told to do MS-CHAPv2 for marissa with NT-Password
[mschap] FAILED: No NT/LM-Password.  Cannot perform authentication.
[mschap] FAILED: MS-CHAP2-Response is incorrect
++[mschap] returns reject
[eap] Freeing handler
++[eap] returns reject
Failed to authenticate the user.
} # server inner-tunnel
[peap] Got tunneled reply code 3
Auth-Type := Accept
Reply-Message = "You have been authenticated"
MS-CHAP-Error = "\321E=691 R=1"
EAP-Message = 0x04d10004
Message-Authenticator = 0x00000000000000000000000000000000
[peap] Got tunneled reply RADIUS code 3
Auth-Type := Accept
Reply-Message = "You have been authenticated"
MS-CHAP-Error = "\321E=691 R=1"
EAP-Message = 0x04d10004
Message-Authenticator = 0x00000000000000000000000000000000
[peap] Tunneled authentication was rejected.
[peap] FAILURE
++[eap] returns handled
Sending Access-Challenge of id 109 to 192.168.1.1 port 44783
EAP-Message = 0x01d2002b190017030100206c6a2815e2226ebc4ebadbe29ef167db65e402ebc8a15e98d10e97c210ae81d7
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xce01e300c9d3fa33f34fb10b4809c83e
Finished request 25.
Going to the next request
Waking up in 1.1 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=110, length=211
User-Name = "marissa"
NAS-Identifier = "Rad_test2"
Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = "E4-CE-8F-92-53-B8"
Connect-Info = "CONNECT 54Mbps 802.11g"
Framed-MTU = 1400
EAP-Message = 0x02d2002b19001703010020c9efb59fe5d4d3a00154aec0e02e65b128eaa9c11083a1fa3002834c82280894
State = 0xce01e300c9d3fa33f34fb10b4809c83e
Message-Authenticator = 0xcbde3df03b9879f30cb1eec56354b553
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "marissa", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 210 length 43
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7
[peap] Done initial handshake
[peap] eaptls_process returned 7
[peap] EAPTLS_OK
[peap] Session established.  Decoding tunneled attributes.
[peap] Received EAP-TLV response.
[peap]  Had sent TLV failure.  User was rejected earlier in this session.
[eap] Handler failed in EAP/peap
[eap] Failed in EAP select
++[eap] returns invalid
Failed to authenticate the user.
Using Post-Auth-Type Reject
+- entering group REJECT {...}
++[ldap] returns noop
Delaying reject of request 26 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 26
Sending Access-Reject of id 110 to 192.168.1.1 port 44783
EAP-Message = 0x04d20004
Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 0.1 seconds.
Cleaning up request 0 ID 84 with timestamp +11
Cleaning up request 1 ID 85 with timestamp +12
Cleaning up request 2 ID 86 with timestamp +12
Cleaning up request 3 ID 87 with timestamp +12
Cleaning up request 4 ID 88 with timestamp +12
Cleaning up request 5 ID 89 with timestamp +12
Cleaning up request 6 ID 90 with timestamp +12
Cleaning up request 7 ID 91 with timestamp +12
Waking up in 1.0 seconds.
Cleaning up request 8 ID 92 with timestamp +12
Waking up in 0.5 seconds.
Cleaning up request 9 ID 93 with timestamp +13
Cleaning up request 10 ID 94 with timestamp +13
Cleaning up request 11 ID 95 with timestamp +13
Cleaning up request 12 ID 96 with timestamp +13
Cleaning up request 13 ID 97 with timestamp +13
Cleaning up request 14 ID 98 with timestamp +13
Cleaning up request 15 ID 99 with timestamp +13
Cleaning up request 16 ID 100 with timestamp +13
Waking up in 1.0 seconds.
Cleaning up request 17 ID 101 with timestamp +13
Waking up in 0.6 seconds.
Cleaning up request 18 ID 102 with timestamp +15
Cleaning up request 19 ID 103 with timestamp +15
Cleaning up request 20 ID 104 with timestamp +15
Cleaning up request 21 ID 105 with timestamp +15
Cleaning up request 22 ID 106 with timestamp +15
Cleaning up request 23 ID 107 with timestamp +15
Cleaning up request 24 ID 108 with timestamp +15
Cleaning up request 25 ID 109 with timestamp +15
Waking up in 1.0 seconds.
Cleaning up request 26 ID 110 with timestamp +15
Ready to process requests.

To me, it looks like the edirectory password is not getting prompted for properly, but I don't know where to fix that.

Any guidance to what we have missed will be greatly appreciated.
(if the config files are needed, please let me know and I will post)

Thanks in advance.

Brian
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

________________________________

CONFIDENTIALITY NOTICE: This e-mail may contain information that is privileged, confidential or otherwise protected from disclosure. **If you are not the intended recipient of this e-mail, please notify the sender immediately by return e-mail, purge it and do not disseminate or copy it.

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
--
This email was Virus checked by Astaro Security Gateway. http://www.sophos.com