help with configs for eap-md5
Isaac Konikoff
isaac.konikoff at gmail.com
Tue Aug 25 22:57:18 CEST 2015
Ok, I tried using phase2 eap=md5 instead of autheap=md5, but the server
still chooses mschapv2. Here is my supplicant config and radiusd output,
thanks for taking a look...
ctrl_interface=/var/run/wpa_supplicant
fast_reauth=1
concurrent_assoc_ok=1
accept_external_scan_results=1
scan_cur_freq=1
min_scan_gap=5
p2p_disabled=1
bss_max_count=2000
network={
ssid="ac-vap-ch149"
disable_ht=0
disable_vht=0
ieee80211w=0
disable_ht40=0
disable_sgi=0
ht_mcs=""
disable_max_amsdu=-1
ampdu_factor=-1
ampdu_density=-1
proto=RSN
key_mgmt=WPA-EAP
eap=PEAP
ocsp=0
pairwise=TKIP CCMP
group=TKIP CCMP
identity="testuser"
password="testpasswd"
phase2="eap=MD5"
proactive_key_caching=0
}
[1mradiusd: FreeRADIUS Version 3.0.3, for host x86_64-redhat-linux-gnu,
built on Jun 3 2014 at 12:39:33[0m
[1mCopyright (C) 1999-2014 The FreeRADIUS server project and
contributors[0m
[1mThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A[0m
[1mPARTICULAR PURPOSE[0m
[1mYou may redistribute copies of FreeRADIUS under the terms of the[0m
[1mGNU General Public License[0m
[1mFor more information about these matters, see the file named
COPYRIGHT[0m
[1mStarting - reading configuration files ...[0m
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/detail.log
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/operator-name
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/cui
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
security {
user = "radiusd"
group = "radiusd"
allow_core_dumps = no
}
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
allow_vulnerable_openssl = "CVE-2014-0160"
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
revive_interval = 120
status_check_timeout = 4
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
radiusd: #### Instantiating modules ####
instantiate {
}
modules {
# Loaded module rlm_soh
# Instantiating module "soh" from file /etc/raddb/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_linelog
# Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
linelog {
filename = "/var/log/radius/linelog"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{Packet-Type}:-default}"
}
# Instantiating module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/radius/linelog-accounting"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_pap
# Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_utf8
# Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8
# Loaded module rlm_exec
# Instantiating module "ntlm_auth" from file
/etc/raddb/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_eap
# Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
mod_accounting_username_bug = no
max_sessions = 1024
}
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
ca_path = "/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/etc/raddb/certs/server.pem"
certificate_file = "/etc/raddb/certs/server.pem"
ca_file = "/etc/raddb/certs/ca.pem"
private_key_password = <<< secret >>>
dh_file = "/etc/raddb/certs/dh"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
ecdh_curve = "prime256v1"
cache {
enable = yes
lifetime = 24
max_entries = 255
}
verify {
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = yes
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_method = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Loaded module rlm_mschap
# Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
}
# Loaded module rlm_unix
# Instantiating module "unix" from file /etc/raddb/mods-enabled/unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
# Loaded module rlm_cache
# Instantiating module "cache_eap" from file
/etc/raddb/mods-enabled/cache_eap
cache cache_eap {
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 16384
epoch = 0
add_stats = no
}
# Loaded module rlm_files
# Instantiating module "files" from file /etc/raddb/mods-enabled/files
files {
filename = "/etc/raddb/mods-config/files/authorize"
usersfile = "/etc/raddb/mods-config/files/authorize"
acctusersfile = "/etc/raddb/mods-config/files/accounting"
preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
compat = "cistron"
}
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:2 Cistron compatibility checks for
entry lanforge ...
[/etc/raddb/mods-config/files/authorize]:6 Cistron compatibility checks for
entry testuser ...
[/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks
for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks
for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:202 Cistron compatibility checks
for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:2 Cistron compatibility checks for
entry lanforge ...
[/etc/raddb/mods-config/files/authorize]:6 Cistron compatibility checks for
entry testuser ...
[/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks
for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks
for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:202 Cistron compatibility checks
for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
# Loaded module rlm_expiration
# Instantiating module "expiration" from file
/etc/raddb/mods-enabled/expiration
# Loaded module rlm_chap
# Instantiating module "chap" from file /etc/raddb/mods-enabled/chap
# Loaded module rlm_passwd
# Instantiating module "etc_passwd" from file
/etc/raddb/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Loaded module rlm_expr
# Instantiating module "expr" from file /etc/raddb/mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
# Loaded module rlm_digest
# Instantiating module "digest" from file /etc/raddb/mods-enabled/digest
# Loaded module rlm_preprocess
# Instantiating module "preprocess" from file
/etc/raddb/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
hints = "/etc/raddb/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
# Instantiating module "echo" from file /etc/raddb/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loaded module rlm_dhcp
# Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp
# Loaded module rlm_detail
# Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
detail {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Loaded module rlm_unpack
# Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack
# Loaded module rlm_logintime
# Instantiating module "logintime" from file
/etc/raddb/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_dynamic_clients
# Instantiating module "dynamic_clients" from file
/etc/raddb/mods-enabled/dynamic_clients
# Loaded module rlm_attr_filter
# Instantiating module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/raddb/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
# Instantiating module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
# Loaded module rlm_realm
# Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Instantiating module "realmpercent" from file
/etc/raddb/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_always
# Instantiating module "reject" from file /etc/raddb/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Instantiating module "fail" from file /etc/raddb/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Instantiating module "ok" from file /etc/raddb/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Instantiating module "handled" from file /etc/raddb/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Instantiating module "noop" from file /etc/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Instantiating module "updated" from file /etc/raddb/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Instantiating module "exec" from file /etc/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_replicate
# Instantiating module "replicate" from file
/etc/raddb/mods-enabled/replicate
# Loaded module rlm_radutmp
# Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Instantiating module "sradutmp" from file
/etc/raddb/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/radius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Instantiating module "auth_log" from file
/etc/raddb/mods-enabled/detail.log
detail auth_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
# Instantiating module "reply_log" from file
/etc/raddb/mods-enabled/detail.log
detail reply_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Instantiating module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
detail pre_proxy_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Instantiating module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
detail post_proxy_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
# Creating Auth-Type = digest
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on auth address * port 1812 as server default
Listening on acct address * port 1813 as server default
Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel
Opening new proxy socket 'proxy address * port 0'
Listening on proxy address * port 14118
Ready to process requests.
Received Access-Request Id 115 from 127.0.0.1:35433 to 127.0.0.1:1812
length 199
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-0000000B'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message = 0x0264000d017465737475736572
Message-Authenticator = 0x5a43ead9f696947f84ed2658ddc077b2
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0) authorize {
(0) filter_username filter_username {
(0) if (User-Name != "%{tolower:%{User-Name}}")
(0) EXPAND %{tolower:%{User-Name}}
(0) --> testuser
(0) if (User-Name != "%{tolower:%{User-Name}}") -> FALSE
(0) if (User-Name =~ / /)
(0) if (User-Name =~ / /) -> FALSE
(0) if (User-Name =~ /@.*@/ )
(0) if (User-Name =~ /@.*@/ ) -> FALSE
(0) if (User-Name =~ /\\.\\./ )
(0) if (User-Name =~ /\\.\\./ ) -> FALSE
(0) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(0) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(0) if (User-Name =~ /\\.$/)
(0) if (User-Name =~ /\\.$/) -> FALSE
(0) if (User-Name =~ /@\\./)
(0) if (User-Name =~ /@\\./) -> FALSE
(0) } # filter_username filter_username = notfound
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(0) suffix : No such realm "NULL"
(0) [suffix] = noop
(0) eap : EAP packet type response id 100 length 13
(0) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0) [eap] = ok
(0) } # authorize = ok
(0) Found Auth-Type = EAP
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0) authenticate {
(0) eap : Peer sent Identity (1)
(0) eap : Calling eap_md5 to process EAP data
(0) eap_md5 : Issuing MD5 Challenge
(0) eap : New EAP session, adding 'State' attribute to reply
0x425c227b42392618
(0) [eap] = handled
(0) } # authenticate = handled
Sending Access-Challenge Id 115 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message = 0x016500160410a41c392327db84fc2f85202f3df189e3
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x425c227b42392618d2ed423eb81d6eed
(0) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 116 from 127.0.0.1:35433 to 127.0.0.1:1812
length 210
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-0000000B'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message = 0x026500060319
State = 0x425c227b42392618d2ed423eb81d6eed
Message-Authenticator = 0x1332bfacd1f9eaf7af985db132dd5563
(1) # Executing section authorize from file /etc/raddb/sites-enabled/default
(1) authorize {
(1) filter_username filter_username {
(1) if (User-Name != "%{tolower:%{User-Name}}")
(1) EXPAND %{tolower:%{User-Name}}
(1) --> testuser
(1) if (User-Name != "%{tolower:%{User-Name}}") -> FALSE
(1) if (User-Name =~ / /)
(1) if (User-Name =~ / /) -> FALSE
(1) if (User-Name =~ /@.*@/ )
(1) if (User-Name =~ /@.*@/ ) -> FALSE
(1) if (User-Name =~ /\\.\\./ )
(1) if (User-Name =~ /\\.\\./ ) -> FALSE
(1) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(1) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(1) if (User-Name =~ /\\.$/)
(1) if (User-Name =~ /\\.$/) -> FALSE
(1) if (User-Name =~ /@\\./)
(1) if (User-Name =~ /@\\./) -> FALSE
(1) } # filter_username filter_username = notfound
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(1) suffix : No such realm "NULL"
(1) [suffix] = noop
(1) eap : EAP packet type response id 101 length 6
(1) eap : No EAP Start, assuming it's an on-going EAP conversation
(1) [eap] = updated
(1) files : users: Matched entry testuser at line 6
(1) [files] = ok
(1) [expiration] = noop
(1) [logintime] = noop
(1) WARNING: pap : Auth-Type already set. Not setting to PAP
(1) [pap] = noop
(1) } # authorize = updated
(1) Found Auth-Type = EAP
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1) authenticate {
(1) eap : Expiring EAP session with state 0x425c227b42392618
(1) eap : Finished EAP session with state 0x425c227b42392618
(1) eap : Previous EAP request found for state 0x425c227b42392618, released
from the list
(1) eap : Peer sent NAK (3)
(1) eap : Found mutually acceptable type PEAP (25)
(1) eap : Calling eap_peap to process EAP data
(1) eap_peap : Flushing SSL sessions (of #0)
(1) eap_peap : Initiate
(1) eap_peap : Start returned 1
(1) eap : New EAP session, adding 'State' attribute to reply
0x425c227b433a3b18
(1) [eap] = handled
(1) } # authenticate = handled
Sending Access-Challenge Id 116 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message = 0x016600061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x425c227b433a3b18d2ed423eb81d6eed
(1) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 117 from 127.0.0.1:35433 to 127.0.0.1:1812
length 461
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-0000000B'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message =
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
State = 0x425c227b433a3b18d2ed423eb81d6eed
Message-Authenticator = 0xa567fc532b5fe3932fc45396a7760976
(2) # Executing section authorize from file /etc/raddb/sites-enabled/default
(2) authorize {
(2) filter_username filter_username {
(2) if (User-Name != "%{tolower:%{User-Name}}")
(2) EXPAND %{tolower:%{User-Name}}
(2) --> testuser
(2) if (User-Name != "%{tolower:%{User-Name}}") -> FALSE
(2) if (User-Name =~ / /)
(2) if (User-Name =~ / /) -> FALSE
(2) if (User-Name =~ /@.*@/ )
(2) if (User-Name =~ /@.*@/ ) -> FALSE
(2) if (User-Name =~ /\\.\\./ )
(2) if (User-Name =~ /\\.\\./ ) -> FALSE
(2) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(2) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(2) if (User-Name =~ /\\.$/)
(2) if (User-Name =~ /\\.$/) -> FALSE
(2) if (User-Name =~ /@\\./)
(2) if (User-Name =~ /@\\./) -> FALSE
(2) } # filter_username filter_username = notfound
(2) [chap] = noop
(2) [mschap] = noop
(2) [digest] = noop
(2) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(2) suffix : No such realm "NULL"
(2) [suffix] = noop
(2) eap : EAP packet type response id 102 length 255
(2) eap : Continuing tunnel setup.
(2) [eap] = ok
(2) } # authorize = ok
(2) Found Auth-Type = EAP
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2) authenticate {
(2) eap : Expiring EAP session with state 0x425c227b433a3b18
(2) eap : Finished EAP session with state 0x425c227b433a3b18
(2) eap : Previous EAP request found for state 0x425c227b433a3b18, released
from the list
(2) eap : Peer sent PEAP (25)
(2) eap : EAP PEAP (25)
(2) eap : Calling eap_peap to process EAP data
(2) eap_peap : processing EAP-TLS
TLS Length 245
(2) eap_peap : Length Included
(2) eap_peap : eaptls_verify returned 11
(2) eap_peap : (other): before/accept initialization
(2) eap_peap : TLS_accept: before/accept initialization
(2) eap_peap : <<< TLS 1.0 Handshake [length 00f0], ClientHello
(2) eap_peap : TLS_accept: SSLv3 read client hello A
(2) eap_peap : >>> TLS 1.0 Handshake [length 005e], ServerHello
(2) eap_peap : TLS_accept: SSLv3 write server hello A
(2) eap_peap : >>> TLS 1.0 Handshake [length 0919], Certificate
(2) eap_peap : TLS_accept: SSLv3 write certificate A
(2) eap_peap : >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange
(2) eap_peap : TLS_accept: SSLv3 write key exchange A
(2) eap_peap : >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
(2) eap_peap : TLS_accept: SSLv3 write server done A
(2) eap_peap : TLS_accept: SSLv3 flush data
(2) eap_peap : TLS_accept: Need to read more data: SSLv3 read client
certificate A
In SSL Handshake Phase
In SSL Accept mode
(2) eap_peap : eaptls_process returned 13
(2) eap_peap : FR_TLS_HANDLED
(2) eap : New EAP session, adding 'State' attribute to reply
0x425c227b403b3b18
(2) [eap] = handled
(2) } # authenticate = handled
Sending Access-Challenge Id 117 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
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
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x425c227b403b3b18d2ed423eb81d6eed
(2) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 118 from 127.0.0.1:35433 to 127.0.0.1:1812
length 210
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-0000000B'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message = 0x026700061900
State = 0x425c227b403b3b18d2ed423eb81d6eed
Message-Authenticator = 0x11c52c20e102c353349408ff505e89d1
(3) # Executing section authorize from file /etc/raddb/sites-enabled/default
(3) authorize {
(3) filter_username filter_username {
(3) if (User-Name != "%{tolower:%{User-Name}}")
(3) EXPAND %{tolower:%{User-Name}}
(3) --> testuser
(3) if (User-Name != "%{tolower:%{User-Name}}") -> FALSE
(3) if (User-Name =~ / /)
(3) if (User-Name =~ / /) -> FALSE
(3) if (User-Name =~ /@.*@/ )
(3) if (User-Name =~ /@.*@/ ) -> FALSE
(3) if (User-Name =~ /\\.\\./ )
(3) if (User-Name =~ /\\.\\./ ) -> FALSE
(3) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(3) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(3) if (User-Name =~ /\\.$/)
(3) if (User-Name =~ /\\.$/) -> FALSE
(3) if (User-Name =~ /@\\./)
(3) if (User-Name =~ /@\\./) -> FALSE
(3) } # filter_username filter_username = notfound
(3) [chap] = noop
(3) [mschap] = noop
(3) [digest] = noop
(3) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(3) suffix : No such realm "NULL"
(3) [suffix] = noop
(3) eap : EAP packet type response id 103 length 6
(3) eap : Continuing tunnel setup.
(3) [eap] = ok
(3) } # authorize = ok
(3) Found Auth-Type = EAP
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3) authenticate {
(3) eap : Expiring EAP session with state 0x425c227b403b3b18
(3) eap : Finished EAP session with state 0x425c227b403b3b18
(3) eap : Previous EAP request found for state 0x425c227b403b3b18, released
from the list
(3) eap : Peer sent PEAP (25)
(3) eap : EAP PEAP (25)
(3) eap : Calling eap_peap to process EAP data
(3) eap_peap : processing EAP-TLS
(3) eap_peap : Received TLS ACK
(3) eap_peap : Received TLS ACK
(3) eap_peap : ACK handshake fragment handler
(3) eap_peap : eaptls_verify returned 1
(3) eap_peap : eaptls_process returned 13
(3) eap_peap : FR_TLS_HANDLED
(3) eap : New EAP session, adding 'State' attribute to reply
0x425c227b41343b18
(3) [eap] = handled
(3) } # authenticate = handled
Sending Access-Challenge Id 118 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
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
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x425c227b41343b18d2ed423eb81d6eed
(3) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 119 from 127.0.0.1:35433 to 127.0.0.1:1812
length 210
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-0000000B'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message = 0x026800061900
State = 0x425c227b41343b18d2ed423eb81d6eed
Message-Authenticator = 0xf0ae126288da340b2bb942f9613e1102
(4) # Executing section authorize from file /etc/raddb/sites-enabled/default
(4) authorize {
(4) filter_username filter_username {
(4) if (User-Name != "%{tolower:%{User-Name}}")
(4) EXPAND %{tolower:%{User-Name}}
(4) --> testuser
(4) if (User-Name != "%{tolower:%{User-Name}}") -> FALSE
(4) if (User-Name =~ / /)
(4) if (User-Name =~ / /) -> FALSE
(4) if (User-Name =~ /@.*@/ )
(4) if (User-Name =~ /@.*@/ ) -> FALSE
(4) if (User-Name =~ /\\.\\./ )
(4) if (User-Name =~ /\\.\\./ ) -> FALSE
(4) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(4) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(4) if (User-Name =~ /\\.$/)
(4) if (User-Name =~ /\\.$/) -> FALSE
(4) if (User-Name =~ /@\\./)
(4) if (User-Name =~ /@\\./) -> FALSE
(4) } # filter_username filter_username = notfound
(4) [chap] = noop
(4) [mschap] = noop
(4) [digest] = noop
(4) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(4) suffix : No such realm "NULL"
(4) [suffix] = noop
(4) eap : EAP packet type response id 104 length 6
(4) eap : Continuing tunnel setup.
(4) [eap] = ok
(4) } # authorize = ok
(4) Found Auth-Type = EAP
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4) authenticate {
(4) eap : Expiring EAP session with state 0x425c227b41343b18
(4) eap : Finished EAP session with state 0x425c227b41343b18
(4) eap : Previous EAP request found for state 0x425c227b41343b18, released
from the list
(4) eap : Peer sent PEAP (25)
(4) eap : EAP PEAP (25)
(4) eap : Calling eap_peap to process EAP data
(4) eap_peap : processing EAP-TLS
(4) eap_peap : Received TLS ACK
(4) eap_peap : Received TLS ACK
(4) eap_peap : ACK handshake fragment handler
(4) eap_peap : eaptls_verify returned 1
(4) eap_peap : eaptls_process returned 13
(4) eap_peap : FR_TLS_HANDLED
(4) eap : New EAP session, adding 'State' attribute to reply
0x425c227b46353b18
(4) [eap] = handled
(4) } # authenticate = handled
Sending Access-Challenge Id 119 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
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
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x425c227b46353b18d2ed423eb81d6eed
(4) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 120 from 127.0.0.1:35433 to 127.0.0.1:1812
length 348
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-0000000B'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message =
0x026900901980000000861603010046100000424104e90f9c429a5928989ce5deabd47eea9b71a50008a51a6fb300ab606422aec0b29cee6080e071dd01d4b5c89adfbf267eeee24ad259b26db70ffe6cfbea0bfcac1403010001011603010030adeeb6881cca7a638895dab1733bff636f18b128c3496840377d560e2d650a18895e480aa7c9d6bd79ccb4523be8cf59
State = 0x425c227b46353b18d2ed423eb81d6eed
Message-Authenticator = 0x3adafeb1542fe9cc79f88bdd0616530e
(5) # Executing section authorize from file /etc/raddb/sites-enabled/default
(5) authorize {
(5) filter_username filter_username {
(5) if (User-Name != "%{tolower:%{User-Name}}")
(5) EXPAND %{tolower:%{User-Name}}
(5) --> testuser
(5) if (User-Name != "%{tolower:%{User-Name}}") -> FALSE
(5) if (User-Name =~ / /)
(5) if (User-Name =~ / /) -> FALSE
(5) if (User-Name =~ /@.*@/ )
(5) if (User-Name =~ /@.*@/ ) -> FALSE
(5) if (User-Name =~ /\\.\\./ )
(5) if (User-Name =~ /\\.\\./ ) -> FALSE
(5) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(5) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(5) if (User-Name =~ /\\.$/)
(5) if (User-Name =~ /\\.$/) -> FALSE
(5) if (User-Name =~ /@\\./)
(5) if (User-Name =~ /@\\./) -> FALSE
(5) } # filter_username filter_username = notfound
(5) [chap] = noop
(5) [mschap] = noop
(5) [digest] = noop
(5) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(5) suffix : No such realm "NULL"
(5) [suffix] = noop
(5) eap : EAP packet type response id 105 length 144
(5) eap : Continuing tunnel setup.
(5) [eap] = ok
(5) } # authorize = ok
(5) Found Auth-Type = EAP
(5) # Executing group from file /etc/raddb/sites-enabled/default
(5) authenticate {
(5) eap : Expiring EAP session with state 0x425c227b46353b18
(5) eap : Finished EAP session with state 0x425c227b46353b18
(5) eap : Previous EAP request found for state 0x425c227b46353b18, released
from the list
(5) eap : Peer sent PEAP (25)
(5) eap : EAP PEAP (25)
(5) eap : Calling eap_peap to process EAP data
(5) eap_peap : processing EAP-TLS
TLS Length 134
(5) eap_peap : Length Included
(5) eap_peap : eaptls_verify returned 11
(5) eap_peap : <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange
(5) eap_peap : TLS_accept: SSLv3 read client key exchange A
(5) eap_peap : <<< TLS 1.0 ChangeCipherSpec [length 0001]
(5) eap_peap : <<< TLS 1.0 Handshake [length 0010], Finished
(5) eap_peap : TLS_accept: SSLv3 read finished A
(5) eap_peap : >>> TLS 1.0 ChangeCipherSpec [length 0001]
(5) eap_peap : TLS_accept: SSLv3 write change cipher spec A
(5) eap_peap : >>> TLS 1.0 Handshake [length 0010], Finished
(5) eap_peap : TLS_accept: SSLv3 write finished A
(5) eap_peap : TLS_accept: SSLv3 flush data
SSL: adding session
1fda4653cde1d52f5bbabdbde0c541b135031e28b1f622ec84e9a968ce43c70d to cache
(5) eap_peap : (other): SSL negotiation finished successfully
SSL Connection Established
(5) eap_peap : eaptls_process returned 13
(5) eap_peap : FR_TLS_HANDLED
(5) eap : New EAP session, adding 'State' attribute to reply
0x425c227b47363b18
(5) [eap] = handled
(5) } # authenticate = handled
Sending Access-Challenge Id 120 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
0x016a004119001403010001011603010030f61843ba50339b6bdbe12e9405baba2f792e568c604e8608a1c5b89c218df85292daff8a20602e5c851ac0825e2144ea
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x425c227b47363b18d2ed423eb81d6eed
(5) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 121 from 127.0.0.1:35433 to 127.0.0.1:1812
length 210
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-0000000B'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message = 0x026a00061900
State = 0x425c227b47363b18d2ed423eb81d6eed
Message-Authenticator = 0x210395d8662bb9c9f3c9dc26769faa14
(6) # Executing section authorize from file /etc/raddb/sites-enabled/default
(6) authorize {
(6) filter_username filter_username {
(6) if (User-Name != "%{tolower:%{User-Name}}")
(6) EXPAND %{tolower:%{User-Name}}
(6) --> testuser
(6) if (User-Name != "%{tolower:%{User-Name}}") -> FALSE
(6) if (User-Name =~ / /)
(6) if (User-Name =~ / /) -> FALSE
(6) if (User-Name =~ /@.*@/ )
(6) if (User-Name =~ /@.*@/ ) -> FALSE
(6) if (User-Name =~ /\\.\\./ )
(6) if (User-Name =~ /\\.\\./ ) -> FALSE
(6) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(6) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(6) if (User-Name =~ /\\.$/)
(6) if (User-Name =~ /\\.$/) -> FALSE
(6) if (User-Name =~ /@\\./)
(6) if (User-Name =~ /@\\./) -> FALSE
(6) } # filter_username filter_username = notfound
(6) [chap] = noop
(6) [mschap] = noop
(6) [digest] = noop
(6) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(6) suffix : No such realm "NULL"
(6) [suffix] = noop
(6) eap : EAP packet type response id 106 length 6
(6) eap : Continuing tunnel setup.
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = EAP
(6) # Executing group from file /etc/raddb/sites-enabled/default
(6) authenticate {
(6) eap : Expiring EAP session with state 0x425c227b47363b18
(6) eap : Finished EAP session with state 0x425c227b47363b18
(6) eap : Previous EAP request found for state 0x425c227b47363b18, released
from the list
(6) eap : Peer sent PEAP (25)
(6) eap : EAP PEAP (25)
(6) eap : Calling eap_peap to process EAP data
(6) eap_peap : processing EAP-TLS
(6) eap_peap : Received TLS ACK
(6) eap_peap : Received TLS ACK
(6) eap_peap : ACK handshake is finished
(6) eap_peap : eaptls_verify returned 3
(6) eap_peap : eaptls_process returned 3
(6) eap_peap : FR_TLS_SUCCESS
(6) eap_peap : Session established. Decoding tunneled attributes.
(6) eap_peap : Peap state TUNNEL ESTABLISHED
(6) eap : New EAP session, adding 'State' attribute to reply
0x425c227b44373b18
(6) [eap] = handled
(6) } # authenticate = handled
Sending Access-Challenge Id 121 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
0x016b002b19001703010020a300688792f35674a17f6e9823f561329565822120fd9dac4a4e409ade314026
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x425c227b44373b18d2ed423eb81d6eed
(6) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 122 from 127.0.0.1:35433 to 127.0.0.1:1812
length 284
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-0000000B'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message =
0x026b00501900170301002088de61ad184bfc580032a3c24039e3680228d239fee17c2953cfc06c0ca291641703010020b3878f21d76b3a1ed0630f9c9fe702c168c9799217367376213dd0d366f6911b
State = 0x425c227b44373b18d2ed423eb81d6eed
Message-Authenticator = 0x7bb921a5b4839ba06d0d86303c9f87c8
(7) # Executing section authorize from file /etc/raddb/sites-enabled/default
(7) authorize {
(7) filter_username filter_username {
(7) if (User-Name != "%{tolower:%{User-Name}}")
(7) EXPAND %{tolower:%{User-Name}}
(7) --> testuser
(7) if (User-Name != "%{tolower:%{User-Name}}") -> FALSE
(7) if (User-Name =~ / /)
(7) if (User-Name =~ / /) -> FALSE
(7) if (User-Name =~ /@.*@/ )
(7) if (User-Name =~ /@.*@/ ) -> FALSE
(7) if (User-Name =~ /\\.\\./ )
(7) if (User-Name =~ /\\.\\./ ) -> FALSE
(7) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(7) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(7) if (User-Name =~ /\\.$/)
(7) if (User-Name =~ /\\.$/) -> FALSE
(7) if (User-Name =~ /@\\./)
(7) if (User-Name =~ /@\\./) -> FALSE
(7) } # filter_username filter_username = notfound
(7) [chap] = noop
(7) [mschap] = noop
(7) [digest] = noop
(7) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(7) suffix : No such realm "NULL"
(7) [suffix] = noop
(7) eap : EAP packet type response id 107 length 80
(7) eap : Continuing tunnel setup.
(7) [eap] = ok
(7) } # authorize = ok
(7) Found Auth-Type = EAP
(7) # Executing group from file /etc/raddb/sites-enabled/default
(7) authenticate {
(7) eap : Expiring EAP session with state 0x425c227b44373b18
(7) eap : Finished EAP session with state 0x425c227b44373b18
(7) eap : Previous EAP request found for state 0x425c227b44373b18, released
from the list
(7) eap : Peer sent PEAP (25)
(7) eap : EAP PEAP (25)
(7) eap : Calling eap_peap to process EAP data
(7) eap_peap : processing EAP-TLS
(7) eap_peap : eaptls_verify returned 7
(7) eap_peap : Done initial handshake
(7) eap_peap : eaptls_process returned 7
(7) eap_peap : FR_TLS_OK
(7) eap_peap : Session established. Decoding tunneled attributes.
(7) eap_peap : Peap state WAITING FOR INNER IDENTITY
(7) eap_peap : Identity - testuser
(7) eap_peap : Got inner identity 'testuser'
(7) eap_peap : Setting default EAP type for tunneled EAP session.
(7) eap_peap : Got tunneled request
EAP-Message = 0x026b000d017465737475736572
server default {
(7) eap_peap : Setting User-Name to testuser
Sending tunneled request
EAP-Message = 0x026b000d017465737475736572
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = 'testuser'
server inner-tunnel {
(7) # Executing section authorize from file
/etc/raddb/sites-enabled/inner-tunnel
(7) authorize {
(7) [chap] = noop
(7) [mschap] = noop
(7) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(7) suffix : No such realm "NULL"
(7) [suffix] = noop
(7) update control {
(7) Proxy-To-Realm := 'LOCAL'
(7) } # update control = noop
(7) eap : EAP packet type response id 107 length 13
(7) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(7) [eap] = ok
(7) } # authorize = ok
(7) Found Auth-Type = EAP
(7) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(7) authenticate {
(7) eap : Peer sent Identity (1)
(7) eap : Calling eap_mschapv2 to process EAP data
(7) eap_mschapv2 : Issuing Challenge
(7) eap : New EAP session, adding 'State' attribute to reply
0x53ea3fa1538625de
(7) [eap] = handled
(7) } # authenticate = handled
} # server inner-tunnel
(7) eap_peap : Got tunneled reply code 11
EAP-Message =
0x016c00221a016c001d10be47ef21294a10f9d8f6ee7a8a0996597465737475736572
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x53ea3fa1538625de09092a4251eb4679
(7) eap_peap : Got tunneled reply RADIUS code 11
EAP-Message =
0x016c00221a016c001d10be47ef21294a10f9d8f6ee7a8a0996597465737475736572
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x53ea3fa1538625de09092a4251eb4679
(7) eap_peap : Got tunneled Access-Challenge
(7) eap : New EAP session, adding 'State' attribute to reply
0x425c227b45303b18
(7) [eap] = handled
(7) } # authenticate = handled
Sending Access-Challenge Id 122 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
0x016c004b19001703010040750f7c1e58996d24bc9c12dffef51996db1a81898e5a15e51111da089511c6d047d79109725fee185ade3117b7043d6aa9514c9466db9dd2499b090265ef495b
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x425c227b45303b18d2ed423eb81d6eed
(7) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 123 from 127.0.0.1:35433 to 127.0.0.1:1812
length 348
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-0000000B'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message =
0x026c00901900170301002073e5171a29121428879a71cb010668c1166967da3a4f68cdabe9d81a5858d24b1703010060da2fff26519a68cfe3a2a550c9932929718256ede2b03e73a59ce793ef744deedda9c5354042851363f97c6d777c6209909457738c2aee11a6f0e74c77dd485132f5a52bb3f98b5dfc6d4e0d915d75b0361c9375160b45d42b30aeb0ab77e460
State = 0x425c227b45303b18d2ed423eb81d6eed
Message-Authenticator = 0x50612c9528f61891eb74c75a53f082c9
(8) # Executing section authorize from file /etc/raddb/sites-enabled/default
(8) authorize {
(8) filter_username filter_username {
(8) if (User-Name != "%{tolower:%{User-Name}}")
(8) EXPAND %{tolower:%{User-Name}}
(8) --> testuser
(8) if (User-Name != "%{tolower:%{User-Name}}") -> FALSE
(8) if (User-Name =~ / /)
(8) if (User-Name =~ / /) -> FALSE
(8) if (User-Name =~ /@.*@/ )
(8) if (User-Name =~ /@.*@/ ) -> FALSE
(8) if (User-Name =~ /\\.\\./ )
(8) if (User-Name =~ /\\.\\./ ) -> FALSE
(8) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(8) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(8) if (User-Name =~ /\\.$/)
(8) if (User-Name =~ /\\.$/) -> FALSE
(8) if (User-Name =~ /@\\./)
(8) if (User-Name =~ /@\\./) -> FALSE
(8) } # filter_username filter_username = notfound
(8) [chap] = noop
(8) [mschap] = noop
(8) [digest] = noop
(8) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(8) suffix : No such realm "NULL"
(8) [suffix] = noop
(8) eap : EAP packet type response id 108 length 144
(8) eap : Continuing tunnel setup.
(8) [eap] = ok
(8) } # authorize = ok
(8) Found Auth-Type = EAP
(8) # Executing group from file /etc/raddb/sites-enabled/default
(8) authenticate {
(8) eap : Expiring EAP session with state 0x53ea3fa1538625de
(8) eap : Finished EAP session with state 0x425c227b45303b18
(8) eap : Previous EAP request found for state 0x425c227b45303b18, released
from the list
(8) eap : Peer sent PEAP (25)
(8) eap : EAP PEAP (25)
(8) eap : Calling eap_peap to process EAP data
(8) eap_peap : processing EAP-TLS
(8) eap_peap : eaptls_verify returned 7
(8) eap_peap : Done initial handshake
(8) eap_peap : eaptls_process returned 7
(8) eap_peap : FR_TLS_OK
(8) eap_peap : Session established. Decoding tunneled attributes.
(8) eap_peap : Peap state phase2
(8) eap_peap : EAP type MSCHAPv2 (26)
(8) eap_peap : Got tunneled request
EAP-Message =
0x026c00431a026c003e31eea61745ad6a21abc448fb4a2a87513500000000000000003dd565507533678da3a13d065a5f566632387edeea534b8a007465737475736572
server default {
(8) eap_peap : Setting User-Name to testuser
Sending tunneled request
EAP-Message =
0x026c00431a026c003e31eea61745ad6a21abc448fb4a2a87513500000000000000003dd565507533678da3a13d065a5f566632387edeea534b8a007465737475736572
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = 'testuser'
State = 0x53ea3fa1538625de09092a4251eb4679
server inner-tunnel {
(8) # Executing section authorize from file
/etc/raddb/sites-enabled/inner-tunnel
(8) authorize {
(8) [chap] = noop
(8) [mschap] = noop
(8) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(8) suffix : No such realm "NULL"
(8) [suffix] = noop
(8) update control {
(8) Proxy-To-Realm := 'LOCAL'
(8) } # update control = noop
(8) eap : EAP packet type response id 108 length 67
(8) eap : No EAP Start, assuming it's an on-going EAP conversation
(8) [eap] = updated
(8) files : users: Matched entry testuser at line 6
(8) [files] = ok
(8) [expiration] = noop
(8) [logintime] = noop
(8) WARNING: pap : Auth-Type already set. Not setting to PAP
(8) [pap] = noop
(8) } # authorize = updated
(8) Found Auth-Type = EAP
(8) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(8) authenticate {
(8) eap : Expiring EAP session with state 0x53ea3fa1538625de
(8) eap : Finished EAP session with state 0x53ea3fa1538625de
(8) eap : Previous EAP request found for state 0x53ea3fa1538625de, released
from the list
(8) eap : Peer sent MSCHAPv2 (26)
(8) eap : EAP MSCHAPv2 (26)
(8) eap : Calling eap_mschapv2 to process EAP data
(8) eap_mschapv2 : # Executing group from file
/etc/raddb/sites-enabled/inner-tunnel
(8) eap_mschapv2 : Auth-Type MS-CHAP {
(8) mschap : Found Cleartext-Password, hashing to create LM-Password
(8) mschap : Found Cleartext-Password, hashing to create NT-Password
(8) mschap : Creating challenge hash with username: testuser
(8) mschap : Client is using MS-CHAPv2
(8) mschap : Adding MS-CHAPv2 MPPE keys
(8) [mschap] = ok
(8) } # Auth-Type MS-CHAP = ok
MSCHAP Success
(8) eap : New EAP session, adding 'State' attribute to reply
0x53ea3fa1528725de
(8) [eap] = handled
(8) } # authenticate = handled
} # server inner-tunnel
(8) eap_peap : Got tunneled reply code 11
EAP-Message =
0x016d00331a036c002e533d44343737393032364532414336344531383244324130323937423531393938303535444546393144
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x53ea3fa1528725de09092a4251eb4679
(8) eap_peap : Got tunneled reply RADIUS code 11
EAP-Message =
0x016d00331a036c002e533d44343737393032364532414336344531383244324130323937423531393938303535444546393144
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x53ea3fa1528725de09092a4251eb4679
(8) eap_peap : Got tunneled Access-Challenge
(8) eap : New EAP session, adding 'State' attribute to reply
0x425c227b4a313b18
(8) [eap] = handled
(8) } # authenticate = handled
Sending Access-Challenge Id 123 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
0x016d005b190017030100501324ee5069f4f71d359a6be896ba4c78c47992f88ce65b4d0f256f38dcb69bbea69123e4c3c2bb7ebad0b46f30daffcc7ba3609fba32f7d024341a1a5c19d023c70bb11b6865c1014082b8911b400588
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x425c227b4a313b18d2ed423eb81d6eed
(8) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 124 from 127.0.0.1:35433 to 127.0.0.1:1812
length 284
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-0000000B'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message =
0x026d005019001703010020e2a96fc9d4af4670f0c1d5c237c6b3f475230a5fd9854d152d3c5da16f67396d170301002029a6d31e1f8e473c222ef7124067e0971a962ca7d7b3e794f1b715a0698ee3dd
State = 0x425c227b4a313b18d2ed423eb81d6eed
Message-Authenticator = 0x153d0eb6f56e3fa48143671f46bac967
(9) # Executing section authorize from file /etc/raddb/sites-enabled/default
(9) authorize {
(9) filter_username filter_username {
(9) if (User-Name != "%{tolower:%{User-Name}}")
(9) EXPAND %{tolower:%{User-Name}}
(9) --> testuser
(9) if (User-Name != "%{tolower:%{User-Name}}") -> FALSE
(9) if (User-Name =~ / /)
(9) if (User-Name =~ / /) -> FALSE
(9) if (User-Name =~ /@.*@/ )
(9) if (User-Name =~ /@.*@/ ) -> FALSE
(9) if (User-Name =~ /\\.\\./ )
(9) if (User-Name =~ /\\.\\./ ) -> FALSE
(9) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(9) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(9) if (User-Name =~ /\\.$/)
(9) if (User-Name =~ /\\.$/) -> FALSE
(9) if (User-Name =~ /@\\./)
(9) if (User-Name =~ /@\\./) -> FALSE
(9) } # filter_username filter_username = notfound
(9) [chap] = noop
(9) [mschap] = noop
(9) [digest] = noop
(9) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(9) suffix : No such realm "NULL"
(9) [suffix] = noop
(9) eap : EAP packet type response id 109 length 80
(9) eap : Continuing tunnel setup.
(9) [eap] = ok
(9) } # authorize = ok
(9) Found Auth-Type = EAP
(9) # Executing group from file /etc/raddb/sites-enabled/default
(9) authenticate {
(9) eap : Expiring EAP session with state 0x53ea3fa1528725de
(9) eap : Finished EAP session with state 0x425c227b4a313b18
(9) eap : Previous EAP request found for state 0x425c227b4a313b18, released
from the list
(9) eap : Peer sent PEAP (25)
(9) eap : EAP PEAP (25)
(9) eap : Calling eap_peap to process EAP data
(9) eap_peap : processing EAP-TLS
(9) eap_peap : eaptls_verify returned 7
(9) eap_peap : Done initial handshake
(9) eap_peap : eaptls_process returned 7
(9) eap_peap : FR_TLS_OK
(9) eap_peap : Session established. Decoding tunneled attributes.
(9) eap_peap : Peap state phase2
(9) eap_peap : EAP type MSCHAPv2 (26)
(9) eap_peap : Got tunneled request
EAP-Message = 0x026d00061a03
server default {
(9) eap_peap : Setting User-Name to testuser
Sending tunneled request
EAP-Message = 0x026d00061a03
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = 'testuser'
State = 0x53ea3fa1528725de09092a4251eb4679
server inner-tunnel {
(9) # Executing section authorize from file
/etc/raddb/sites-enabled/inner-tunnel
(9) authorize {
(9) [chap] = noop
(9) [mschap] = noop
(9) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(9) suffix : No such realm "NULL"
(9) [suffix] = noop
(9) update control {
(9) Proxy-To-Realm := 'LOCAL'
(9) } # update control = noop
(9) eap : EAP packet type response id 109 length 6
(9) eap : EAP-MSCHAPV2 success, returning short-circuit ok
(9) [eap] = ok
(9) } # authorize = ok
(9) Found Auth-Type = EAP
(9) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(9) authenticate {
(9) eap : Expiring EAP session with state 0x53ea3fa1528725de
(9) eap : Finished EAP session with state 0x53ea3fa1528725de
(9) eap : Previous EAP request found for state 0x53ea3fa1528725de, released
from the list
(9) eap : Peer sent MSCHAPv2 (26)
(9) eap : EAP MSCHAPv2 (26)
(9) eap : Calling eap_mschapv2 to process EAP data
(9) eap : Freeing handler
(9) [eap] = ok
(9) } # authenticate = ok
(9) # Executing section post-auth from file
/etc/raddb/sites-enabled/inner-tunnel
(9) (null) post-auth { ... } # empty sub-section is ignored
} # server inner-tunnel
(9) eap_peap : Got tunneled reply code 2
MS-MPPE-Encryption-Policy = Encryption-Allowed
MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
MS-MPPE-Send-Key = 0x97f26afcdecda3030377376dae06b577
MS-MPPE-Recv-Key = 0x660c4597c050f98f217d2d8cba3f782f
EAP-Message = 0x036d0004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = 'testuser'
(9) eap_peap : Got tunneled reply RADIUS code 2
MS-MPPE-Encryption-Policy = Encryption-Allowed
MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
MS-MPPE-Send-Key = 0x97f26afcdecda3030377376dae06b577
MS-MPPE-Recv-Key = 0x660c4597c050f98f217d2d8cba3f782f
EAP-Message = 0x036d0004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = 'testuser'
(9) eap_peap : Tunneled authentication was successful.
(9) eap_peap : SUCCESS
(9) eap : New EAP session, adding 'State' attribute to reply
0x425c227b4b323b18
(9) [eap] = handled
(9) } # authenticate = handled
Sending Access-Challenge Id 124 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
0x016e002b190017030100205177fa5caa7b276de6c2b363ccb1ed0e9e04deff091a4a4840bf6ed9ec8a6cda
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x425c227b4b323b18d2ed423eb81d6eed
(9) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 125 from 127.0.0.1:35433 to 127.0.0.1:1812
length 284
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-0000000B'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message =
0x026e0050190017030100200a23b82c7d80b03fa45cbe3dc4b7340798b4fc812ee546910574bbe0197c4f191703010020f17bba5547e43a7779084e27f9dfc293f36cb9c5328a1faa4538a750ead019c8
State = 0x425c227b4b323b18d2ed423eb81d6eed
Message-Authenticator = 0x141658dfcd6c4314cb35d070832a01bf
(10) # Executing section authorize from file
/etc/raddb/sites-enabled/default
(10) authorize {
(10) filter_username filter_username {
(10) if (User-Name != "%{tolower:%{User-Name}}")
(10) EXPAND %{tolower:%{User-Name}}
(10) --> testuser
(10) if (User-Name != "%{tolower:%{User-Name}}") -> FALSE
(10) if (User-Name =~ / /)
(10) if (User-Name =~ / /) -> FALSE
(10) if (User-Name =~ /@.*@/ )
(10) if (User-Name =~ /@.*@/ ) -> FALSE
(10) if (User-Name =~ /\\.\\./ )
(10) if (User-Name =~ /\\.\\./ ) -> FALSE
(10) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(10) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) ->
FALSE
(10) if (User-Name =~ /\\.$/)
(10) if (User-Name =~ /\\.$/) -> FALSE
(10) if (User-Name =~ /@\\./)
(10) if (User-Name =~ /@\\./) -> FALSE
(10) } # filter_username filter_username = notfound
(10) [chap] = noop
(10) [mschap] = noop
(10) [digest] = noop
(10) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(10) suffix : No such realm "NULL"
(10) [suffix] = noop
(10) eap : EAP packet type response id 110 length 80
(10) eap : Continuing tunnel setup.
(10) [eap] = ok
(10) } # authorize = ok
(10) Found Auth-Type = EAP
(10) # Executing group from file /etc/raddb/sites-enabled/default
(10) authenticate {
(10) eap : Expiring EAP session with state 0x425c227b4b323b18
(10) eap : Finished EAP session with state 0x425c227b4b323b18
(10) eap : Previous EAP request found for state 0x425c227b4b323b18,
released from the list
(10) eap : Peer sent PEAP (25)
(10) eap : EAP PEAP (25)
(10) eap : Calling eap_peap to process EAP data
(10) eap_peap : processing EAP-TLS
(10) eap_peap : eaptls_verify returned 7
(10) eap_peap : Done initial handshake
(10) eap_peap : eaptls_process returned 7
(10) eap_peap : FR_TLS_OK
(10) eap_peap : Session established. Decoding tunneled attributes.
(10) eap_peap : Peap state send tlv success
(10) eap_peap : Received EAP-TLV response.
(10) eap_peap : Success
(10) WARNING: eap_peap : No information to cache: session caching will be
disabled for session
1fda4653cde1d52f5bbabdbde0c541b135031e28b1f622ec84e9a968ce43c70d
SSL: Removing session
1fda4653cde1d52f5bbabdbde0c541b135031e28b1f622ec84e9a968ce43c70d from the
cache
(10) eap : Freeing handler
(10) [eap] = ok
(10) } # authenticate = ok
(10) # Executing section post-auth from file
/etc/raddb/sites-enabled/default
(10) post-auth {
(10) [exec] = noop
(10) remove_reply_message_if_eap remove_reply_message_if_eap {
(10) if (reply:EAP-Message && reply:Reply-Message)
(10) if (reply:EAP-Message && reply:Reply-Message) -> FALSE
(10) else else {
(10) [noop] = noop
(10) } # else else = noop
(10) } # remove_reply_message_if_eap remove_reply_message_if_eap = noop
(10) } # post-auth = noop
Sending Access-Accept Id 125 from 127.0.0.1:1812 to 127.0.0.1:35433
MS-MPPE-Recv-Key =
0x431adfb5a9b7a7371bee0b05dd58569cf96811b5f94aa76cee60e0a19bc00dab
MS-MPPE-Send-Key =
0x2db69fc38e71537b007e0eba61ac8eee671160978870a68ba6b1147412b9d072
EAP-Message = 0x036e0004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = 'testuser'
(10) Finished request
Waking up in 0.2 seconds.
Waking up in 4.5 seconds.
(0) Cleaning up request packet ID 115 with timestamp +12
(1) Cleaning up request packet ID 116 with timestamp +12
(2) Cleaning up request packet ID 117 with timestamp +12
(3) Cleaning up request packet ID 118 with timestamp +12
(4) Cleaning up request packet ID 119 with timestamp +12
(5) Cleaning up request packet ID 120 with timestamp +12
(6) Cleaning up request packet ID 121 with timestamp +12
(7) Cleaning up request packet ID 122 with timestamp +12
(8) Cleaning up request packet ID 123 with timestamp +12
(9) Cleaning up request packet ID 124 with timestamp +12
(10) Cleaning up request packet ID 125 with timestamp +12
Ready to process requests.
On Tue, Aug 25, 2015 at 5:28 AM, Jouni Malinen <jkmalinen at gmail.com> wrote:
> On Tue, Aug 25, 2015 at 2:30 AM, Isaac Konikoff
> <isaac.konikoff at gmail.com> wrote:
> > I'm trying to authenticate a wifi client (wpa_supplicant) using eap-peap
> > with phase2 autheap=md5. In debug output, eap-peap appears to finalize
> with
> > mschapv2 but eap-ttls uses eap-md5. Can I force eap-peap to use eap-md5?
>
> What's the exact configuration parameter you used in the
> wpa_supplicant network profile to set this? If that "phase2
> autheap=md5" is to be interpreted as the exact form, it would be
> incorrect. To configure PEAP with EAP-MD5 in Phase 2, you would need
> to use phase2="eap=MD5" (i.e., "eap" instead of "autheap" which is
> only used with EAP-TTLS and "MD5" instead of "md5"). Without the eap
> parameter in phase2, wpa_supplicant would accept whatever the server
> proposes first (which, most commonly, with PEAP is EAP-MSCHAPv2). With
> the phase2 eap=MD5 parameter included, wpa_supplicant will accept only
> the specified EAP method in Phase 2, i.e., the initial EAP-MSCHAPv2
> attempt would be NAK'ed and if the server supports EAP-MD5, it would
> be used instead.
>
> - Jouni
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list