Re: Freeradius EAP-TLS - every 2nd (even) attempt unsuccessfull
gracian at centrum.cz
gracian at centrum.cz
Sat Dec 5 19:40:15 CET 2015
Alan,
here is full (sorry for that) output of "radiusd -X" test during which an attempt was unsuccessfull again with tls cache disabled. As you can see below, there is not TLS-Client-Cert-Common-Name in the output so the check-eap-tls fails.
radiusd: FreeRADIUS Version 3.0.4, for host x86_64-redhat-linux-gnu, built on Mar 5 2015 at 23:41:36
Copyright (C) 1999-2014 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/operator-name
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/dhcp
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/check-eap-tls
including configuration file /etc/raddb/sites-enabled/inner-tunnel
including configuration file /etc/raddb/sites-enabled/default
main {
security {
user = "radiusd"
group = "radiusd"
allow_core_dumps = no
}
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 64
idle_timeout = 30
}
}
client wlc2504 {
ipaddr = 172.16.0.20
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
radiusd: #### Instantiating modules ####
instantiate {
}
modules {
# Loaded module rlm_attr_filter
# Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/raddb/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
# Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
# Loaded module rlm_pap
# Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_detail
# Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
detail {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Loaded module rlm_unix
# Instantiating module "unix" from file /etc/raddb/mods-enabled/unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
# Loaded module rlm_unpack
# Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack
# Loaded module rlm_always
# Instantiating module "reject" from file /etc/raddb/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Instantiating module "fail" from file /etc/raddb/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Instantiating module "ok" from file /etc/raddb/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Instantiating module "handled" from file /etc/raddb/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Instantiating module "noop" from file /etc/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Instantiating module "updated" from file /etc/raddb/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_replicate
# Instantiating module "replicate" from file /etc/raddb/mods-enabled/replicate
# Loaded module rlm_passwd
# Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Loaded module rlm_radutmp
# Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_preprocess
# Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
hints = "/etc/raddb/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
# Loaded module rlm_exec
# Instantiating module "echo" from file /etc/raddb/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log
detail auth_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
# Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log
detail reply_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
detail pre_proxy_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
detail post_proxy_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Loaded module rlm_utf8
# Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8
# Instantiating module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/radius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Instantiating module "exec" from file /etc/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_logintime
# Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_mschap
# Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = yes
require_strong = yes
with_ntdomain_hack = yes
ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}"
passchange {
}
allow_retry = yes
}
# Loaded module rlm_expiration
# Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration
# Instantiating module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_eap
# Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
eap {
default_eap_type = "tls"
timer_expire = 60
ignore_unknown_eap_types = no
mod_accounting_username_bug = no
max_sessions = 1024
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
virtual_server = "check-eap-tls"
}
tls-config tls-common {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
ca_path = "/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/etc/raddb/certs/server.pem"
certificate_file = "/etc/raddb/certs/server.pem"
ca_file = "/etc/raddb/certs/ca.pem"
private_key_password = <<< secret >>>
dh_file = "/etc/raddb/certs/dh"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:DHE-RSA-CAMELLIA256-SHA:DHE-RSA-CAMELLIA128-SHA"
ecdh_curve = "prime256v1"
cache {
enable = no
lifetime = 24
max_entries = 255
name = "EAP module"
}
verify {
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = yes
}
}
# Loaded module rlm_realm
# Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_digest
# Instantiating module "digest" from file /etc/raddb/mods-enabled/digest
# Loaded module rlm_expr
# Instantiating module "expr" from file /etc/raddb/mods-enabled/expr
expr {
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
# Loaded module rlm_linelog
# Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
linelog {
filename = "/var/log/radius/linelog"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{Packet-Type}:-default}"
}
# Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/radius/linelog-accounting"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_cache
# Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
cache cache_eap {
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 16384
epoch = 0
add_stats = no
}
# Loaded module rlm_chap
# Instantiating module "chap" from file /etc/raddb/mods-enabled/chap
# Loaded module rlm_soh
# Instantiating module "soh" from file /etc/raddb/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_files
# Instantiating module "files" from file /etc/raddb/mods-enabled/files
files {
filename = "/etc/raddb/mods-config/files/authorize"
usersfile = "/etc/raddb/mods-config/files/authorize"
acctusersfile = "/etc/raddb/mods-config/files/accounting"
preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
compat = "cistron"
}
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:215 Cistron compatibility checks for entry testuser ...
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:215 Cistron compatibility checks for entry testuser ...
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
# Loaded module rlm_dhcp
# Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp
# Loaded module rlm_dynamic_clients
# Instantiating module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server check-eap-tls { # from file /etc/raddb/sites-enabled/check-eap-tls
# Loading authorize {...}
} # server check-eap-tls
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server inner-tunnel
server default { # from file /etc/raddb/sites-enabled/default
# Creating Auth-Type = digest
# Loading authenticate {...}
# Loading authorize {...}
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel
Listening on auth address * port 1812 as server default
Listening on acct address * port 1813 as server default
Listening on auth address :: port 1812 as server default
Listening on acct address :: port 1813 as server default
Opening new proxy socket 'proxy address * port 0'
Listening on proxy address * port 47703
Ready to process requests
Received Access-Request Id 194 from 172.16.0.20:32769 to 172.16.110.17:1812 length 269
User-Name = 'mib at example.cz'
Chargeable-User-Identity = 0x00
Location-Capable = Civix-Location
Calling-Station-Id = '20-10-7a-01-c1-80'
Called-Station-Id = 'd0-c2-82-e0-cb-80'
NAS-Port = 1
Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4'
Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574'
NAS-IP-Address = 172.16.0.20
NAS-Identifier = 'wlc'
Airespace-Wlan-Id = 3
Service-Type = Framed-User
Framed-MTU = 1300
NAS-Port-Type = Wireless-802.11
Tunnel-Type:0 = VLAN
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Private-Group-Id:0 = '200'
EAP-Message = 0x02010014016d696240616c696e766573742e637a
Message-Authenticator = 0x1bab59fd5ca9faa4fa61fb1e92a22ef0
(0) Received Access-Request packet from host 172.16.0.20 port 32769, id=194, length=269
(0) User-Name = 'mib at example.cz'
(0) Chargeable-User-Identity = 0x00
(0) Location-Capable = Civix-Location
(0) Calling-Station-Id = '20-10-7a-01-c1-80'
(0) Called-Station-Id = 'd0-c2-82-e0-cb-80'
(0) NAS-Port = 1
(0) Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4'
(0) Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574'
(0) NAS-IP-Address = 172.16.0.20
(0) NAS-Identifier = 'wlc'
(0) Airespace-Wlan-Id = 3
(0) Service-Type = Framed-User
(0) Framed-MTU = 1300
(0) NAS-Port-Type = Wireless-802.11
(0) Tunnel-Type:0 = VLAN
(0) Tunnel-Medium-Type:0 = IEEE-802
(0) Tunnel-Private-Group-Id:0 = '200'
(0) EAP-Message = 0x02010014016d696240616c696e766573742e637a
(0) Message-Authenticator = 0x1bab59fd5ca9faa4fa61fb1e92a22ef0
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0) authorize {
(0) filter_username filter_username {
(0) if (!&User-Name)
(0) if (!&User-Name) -> FALSE
(0) if (&User-Name =~ / /)
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@.*@/ )
(0) if (&User-Name =~ /@.*@/ ) -> FALSE
(0) if (&User-Name =~ /\\.\\./ )
(0) if (&User-Name =~ /\\.\\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(0) if (&User-Name =~ /\\.$/)
(0) if (&User-Name =~ /\\.$/) -> FALSE
(0) if (&User-Name =~ /@\\./)
(0) if (&User-Name =~ /@\\./) -> FALSE
(0) } # filter_username filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix : Checking for suffix after "@"
(0) suffix : Looking up realm "example.cz" for User-Name = "mib at example.cz"
(0) suffix : No such realm "example.cz"
(0) [suffix] = noop
(0) eap : Peer sent code Response (2) ID 1 length 20
(0) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0) [eap] = ok
(0) } # authorize = ok
(0) Found Auth-Type = EAP
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0) authenticate {
(0) eap : Peer sent method Identity (1)
(0) eap : Calling eap_tls to process EAP data
(0) eap_tls : Requiring client certificate
(0) eap_tls : Initiate
(0) eap_tls : Requiring client certificate
(0) eap_tls : Start returned 1
(0) eap : New EAP session, adding 'State' attribute to reply 0x9fff236a9ffd2e86
(0) [eap] = handled
(0) } # authenticate = handled
(0) Sending Access-Challenge packet to host 172.16.0.20 port 32769, id=194, length=0
(0) EAP-Message = 0x010200060d20
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0x9fff236a9ffd2e86923483cd2cba31b1
Sending Access-Challenge Id 194 from 172.16.110.17:1812 to 172.16.0.20:32769
EAP-Message = 0x010200060d20
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x9fff236a9ffd2e86923483cd2cba31b1
(0) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 195 from 172.16.0.20:32769 to 172.16.110.17:1812 length 374
User-Name = 'mib at example.cz'
Chargeable-User-Identity = 0x00
Location-Capable = Civix-Location
Calling-Station-Id = '20-10-7a-01-c1-80'
Called-Station-Id = 'd0-c2-82-e0-cb-80'
NAS-Port = 1
Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4'
Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574'
NAS-IP-Address = 172.16.0.20
NAS-Identifier = 'wlc'
Airespace-Wlan-Id = 3
Service-Type = Framed-User
Framed-MTU = 1300
NAS-Port-Type = Wireless-802.11
Tunnel-Type:0 = VLAN
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Private-Group-Id:0 = '200'
EAP-Message = 0x0202006b0d8000000061160301005c01000058030156632be3cd7be1024baf6a80d10cb073231da2b3505481eb9db66a806656828b000018c014c013c00ac0090035002f00380032000a00130005000401000017000a00080006001900170018000b00020100ff01000100
State = 0x9fff236a9ffd2e86923483cd2cba31b1
Message-Authenticator = 0xb73eb59476ea43f1e2a4302781dfd8e0
(1) Received Access-Request packet from host 172.16.0.20 port 32769, id=195, length=374
(1) User-Name = 'mib at example.cz'
(1) Chargeable-User-Identity = 0x00
(1) Location-Capable = Civix-Location
(1) Calling-Station-Id = '20-10-7a-01-c1-80'
(1) Called-Station-Id = 'd0-c2-82-e0-cb-80'
(1) NAS-Port = 1
(1) Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4'
(1) Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574'
(1) NAS-IP-Address = 172.16.0.20
(1) NAS-Identifier = 'wlc'
(1) Airespace-Wlan-Id = 3
(1) Service-Type = Framed-User
(1) Framed-MTU = 1300
(1) NAS-Port-Type = Wireless-802.11
(1) Tunnel-Type:0 = VLAN
(1) Tunnel-Medium-Type:0 = IEEE-802
(1) Tunnel-Private-Group-Id:0 = '200'
(1) EAP-Message = 0x0202006b0d8000000061160301005c01000058030156632be3cd7be1024baf6a80d10cb073231da2b3505481eb9db66a806656828b000018c014c013c00ac0090035002f00380032000a00130005000401000017000a00080006001900170018000b00020100ff01000100
(1) State = 0x9fff236a9ffd2e86923483cd2cba31b1
(1) Message-Authenticator = 0xb73eb59476ea43f1e2a4302781dfd8e0
(1) # Executing section authorize from file /etc/raddb/sites-enabled/default
(1) authorize {
(1) filter_username filter_username {
(1) if (!&User-Name)
(1) if (!&User-Name) -> FALSE
(1) if (&User-Name =~ / /)
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@.*@/ )
(1) if (&User-Name =~ /@.*@/ ) -> FALSE
(1) if (&User-Name =~ /\\.\\./ )
(1) if (&User-Name =~ /\\.\\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(1) if (&User-Name =~ /\\.$/)
(1) if (&User-Name =~ /\\.$/) -> FALSE
(1) if (&User-Name =~ /@\\./)
(1) if (&User-Name =~ /@\\./) -> FALSE
(1) } # filter_username filter_username = notfound
(1) [preprocess] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) suffix : Checking for suffix after "@"
(1) suffix : Looking up realm "example.cz" for User-Name = "mib at example.cz"
(1) suffix : No such realm "example.cz"
(1) [suffix] = noop
(1) eap : Peer sent code Response (2) ID 2 length 107
(1) eap : No EAP Start, assuming it's an on-going EAP conversation
(1) [eap] = updated
(1) [files] = noop
(1) [expiration] = noop
(1) [logintime] = noop
(1) [pap] = noop
(1) } # authorize = updated
(1) Found Auth-Type = EAP
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1) authenticate {
(1) eap : Expiring EAP session with state 0x9fff236a9ffd2e86
(1) eap : Finished EAP session with state 0x9fff236a9ffd2e86
(1) eap : Previous EAP request found for state 0x9fff236a9ffd2e86, released from the list
(1) eap : Peer sent method TLS (13)
(1) eap : EAP TLS (13)
(1) eap : Calling eap_tls to process EAP data
(1) eap_tls : Authenticate
(1) eap_tls : processing EAP-TLS
TLS Length 97
(1) eap_tls : Length Included
(1) eap_tls : eaptls_verify returned 11
(1) eap_tls : (other): before/accept initialization
(1) eap_tls : TLS_accept: before/accept initialization
(1) eap_tls : <<< TLS 1.0 Handshake [length 005c], ClientHello
(1) eap_tls : TLS_accept: SSLv3 read client hello A
(1) eap_tls : >>> TLS 1.0 Handshake [length 0039], ServerHello
(1) eap_tls : TLS_accept: SSLv3 write server hello A
(1) eap_tls : >>> TLS 1.0 Handshake [length 0909], Certificate
(1) eap_tls : TLS_accept: SSLv3 write certificate A
(1) eap_tls : >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange
(1) eap_tls : TLS_accept: SSLv3 write key exchange A
(1) eap_tls : >>> TLS 1.0 Handshake [length 00b2], CertificateRequest
(1) eap_tls : TLS_accept: SSLv3 write certificate request A
(1) eap_tls : TLS_accept: SSLv3 flush data
(1) eap_tls : TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
(1) eap_tls : eaptls_process returned 13
(1) eap : New EAP session, adding 'State' attribute to reply 0x9fff236a9efc2e86
(1) [eap] = handled
(1) } # authenticate = handled
(1) Sending Access-Challenge packet to host 172.16.0.20 port 32769, id=195, length=0
(1) EAP-Message = 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
2f01a15eabedcb01c483a08963b50e6f28951
(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0x9fff236a9efc2e86923483cd2cba31b1
Sending Access-Challenge Id 195 from 172.16.110.17:1812 to 172.16.0.20:32769
EAP-Message = 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
a15eabedcb01c483a08963b50e6f2895
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x9fff236a9efc2e86923483cd2cba31b1
(1) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 196 from 172.16.0.20:32769 to 172.16.110.17:1812 length 273
User-Name = 'mib at example.cz'
Chargeable-User-Identity = 0x00
Location-Capable = Civix-Location
Calling-Station-Id = '20-10-7a-01-c1-80'
Called-Station-Id = 'd0-c2-82-e0-cb-80'
NAS-Port = 1
Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4'
Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574'
NAS-IP-Address = 172.16.0.20
NAS-Identifier = 'wlc'
Airespace-Wlan-Id = 3
Service-Type = Framed-User
Framed-MTU = 1300
NAS-Port-Type = Wireless-802.11
Tunnel-Type:0 = VLAN
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Private-Group-Id:0 = '200'
EAP-Message = 0x020300060d00
State = 0x9fff236a9efc2e86923483cd2cba31b1
Message-Authenticator = 0x938805f4ed9b8f3b92a739a3a7e2f639
(2) Received Access-Request packet from host 172.16.0.20 port 32769, id=196, length=273
(2) User-Name = 'mib at example.cz'
(2) Chargeable-User-Identity = 0x00
(2) Location-Capable = Civix-Location
(2) Calling-Station-Id = '20-10-7a-01-c1-80'
(2) Called-Station-Id = 'd0-c2-82-e0-cb-80'
(2) NAS-Port = 1
(2) Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4'
(2) Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574'
(2) NAS-IP-Address = 172.16.0.20
(2) NAS-Identifier = 'wlc'
(2) Airespace-Wlan-Id = 3
(2) Service-Type = Framed-User
(2) Framed-MTU = 1300
(2) NAS-Port-Type = Wireless-802.11
(2) Tunnel-Type:0 = VLAN
(2) Tunnel-Medium-Type:0 = IEEE-802
(2) Tunnel-Private-Group-Id:0 = '200'
(2) EAP-Message = 0x020300060d00
(2) State = 0x9fff236a9efc2e86923483cd2cba31b1
(2) Message-Authenticator = 0x938805f4ed9b8f3b92a739a3a7e2f639
(2) # Executing section authorize from file /etc/raddb/sites-enabled/default
(2) authorize {
(2) filter_username filter_username {
(2) if (!&User-Name)
(2) if (!&User-Name) -> FALSE
(2) if (&User-Name =~ / /)
(2) if (&User-Name =~ / /) -> FALSE
(2) if (&User-Name =~ /@.*@/ )
(2) if (&User-Name =~ /@.*@/ ) -> FALSE
(2) if (&User-Name =~ /\\.\\./ )
(2) if (&User-Name =~ /\\.\\./ ) -> FALSE
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(2) if (&User-Name =~ /\\.$/)
(2) if (&User-Name =~ /\\.$/) -> FALSE
(2) if (&User-Name =~ /@\\./)
(2) if (&User-Name =~ /@\\./) -> FALSE
(2) } # filter_username filter_username = notfound
(2) [preprocess] = ok
(2) [chap] = noop
(2) [mschap] = noop
(2) [digest] = noop
(2) suffix : Checking for suffix after "@"
(2) suffix : Looking up realm "example.cz" for User-Name = "mib at example.cz"
(2) suffix : No such realm "example.cz"
(2) [suffix] = noop
(2) eap : Peer sent code Response (2) ID 3 length 6
(2) eap : No EAP Start, assuming it's an on-going EAP conversation
(2) [eap] = updated
(2) [files] = noop
(2) [expiration] = noop
(2) [logintime] = noop
(2) [pap] = noop
(2) } # authorize = updated
(2) Found Auth-Type = EAP
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2) authenticate {
(2) eap : Expiring EAP session with state 0x9fff236a9efc2e86
(2) eap : Finished EAP session with state 0x9fff236a9efc2e86
(2) eap : Previous EAP request found for state 0x9fff236a9efc2e86, released from the list
(2) eap : Peer sent method TLS (13)
(2) eap : EAP TLS (13)
(2) eap : Calling eap_tls to process EAP data
(2) eap_tls : Authenticate
(2) eap_tls : processing EAP-TLS
(2) eap_tls : Received TLS ACK
(2) eap_tls : Received TLS ACK
(2) eap_tls : ACK handshake fragment handler
(2) eap_tls : eaptls_verify returned 1
(2) eap_tls : eaptls_process returned 13
(2) eap : New EAP session, adding 'State' attribute to reply 0x9fff236a9dfb2e86
(2) [eap] = handled
(2) } # authenticate = handled
(2) Sending Access-Challenge packet to host 172.16.0.20 port 32769, id=196, length=0
(2) EAP-Message = 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
122300d06092a864886f70d01010105000382
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0x9fff236a9dfb2e86923483cd2cba31b1
Sending Access-Challenge Id 196 from 172.16.110.17:1812 to 172.16.0.20:32769
EAP-Message = 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
00d06092a864886f70d0101010500038
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x9fff236a9dfb2e86923483cd2cba31b1
(2) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 197 from 172.16.0.20:32769 to 172.16.110.17:1812 length 273
User-Name = 'mib at example.cz'
Chargeable-User-Identity = 0x00
Location-Capable = Civix-Location
Calling-Station-Id = '20-10-7a-01-c1-80'
Called-Station-Id = 'd0-c2-82-e0-cb-80'
NAS-Port = 1
Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4'
Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574'
NAS-IP-Address = 172.16.0.20
NAS-Identifier = 'wlc'
Airespace-Wlan-Id = 3
Service-Type = Framed-User
Framed-MTU = 1300
NAS-Port-Type = Wireless-802.11
Tunnel-Type:0 = VLAN
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Private-Group-Id:0 = '200'
EAP-Message = 0x020400060d00
State = 0x9fff236a9dfb2e86923483cd2cba31b1
Message-Authenticator = 0x0db3c750734a94c54375e9219c8db678
(3) Received Access-Request packet from host 172.16.0.20 port 32769, id=197, length=273
(3) User-Name = 'mib at example.cz'
(3) Chargeable-User-Identity = 0x00
(3) Location-Capable = Civix-Location
(3) Calling-Station-Id = '20-10-7a-01-c1-80'
(3) Called-Station-Id = 'd0-c2-82-e0-cb-80'
(3) NAS-Port = 1
(3) Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4'
(3) Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574'
(3) NAS-IP-Address = 172.16.0.20
(3) NAS-Identifier = 'wlc'
(3) Airespace-Wlan-Id = 3
(3) Service-Type = Framed-User
(3) Framed-MTU = 1300
(3) NAS-Port-Type = Wireless-802.11
(3) Tunnel-Type:0 = VLAN
(3) Tunnel-Medium-Type:0 = IEEE-802
(3) Tunnel-Private-Group-Id:0 = '200'
(3) EAP-Message = 0x020400060d00
(3) State = 0x9fff236a9dfb2e86923483cd2cba31b1
(3) Message-Authenticator = 0x0db3c750734a94c54375e9219c8db678
(3) # Executing section authorize from file /etc/raddb/sites-enabled/default
(3) authorize {
(3) filter_username filter_username {
(3) if (!&User-Name)
(3) if (!&User-Name) -> FALSE
(3) if (&User-Name =~ / /)
(3) if (&User-Name =~ / /) -> FALSE
(3) if (&User-Name =~ /@.*@/ )
(3) if (&User-Name =~ /@.*@/ ) -> FALSE
(3) if (&User-Name =~ /\\.\\./ )
(3) if (&User-Name =~ /\\.\\./ ) -> FALSE
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(3) if (&User-Name =~ /\\.$/)
(3) if (&User-Name =~ /\\.$/) -> FALSE
(3) if (&User-Name =~ /@\\./)
(3) if (&User-Name =~ /@\\./) -> FALSE
(3) } # filter_username filter_username = notfound
(3) [preprocess] = ok
(3) [chap] = noop
(3) [mschap] = noop
(3) [digest] = noop
(3) suffix : Checking for suffix after "@"
(3) suffix : Looking up realm "example.cz" for User-Name = "mib at example.cz"
(3) suffix : No such realm "example.cz"
(3) [suffix] = noop
(3) eap : Peer sent code Response (2) ID 4 length 6
(3) eap : No EAP Start, assuming it's an on-going EAP conversation
(3) [eap] = updated
(3) [files] = noop
(3) [expiration] = noop
(3) [logintime] = noop
(3) [pap] = noop
(3) } # authorize = updated
(3) Found Auth-Type = EAP
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3) authenticate {
(3) eap : Expiring EAP session with state 0x9fff236a9dfb2e86
(3) eap : Finished EAP session with state 0x9fff236a9dfb2e86
(3) eap : Previous EAP request found for state 0x9fff236a9dfb2e86, released from the list
(3) eap : Peer sent method TLS (13)
(3) eap : EAP TLS (13)
(3) eap : Calling eap_tls to process EAP data
(3) eap_tls : Authenticate
(3) eap_tls : processing EAP-TLS
(3) eap_tls : Received TLS ACK
(3) eap_tls : Received TLS ACK
(3) eap_tls : ACK handshake fragment handler
(3) eap_tls : eaptls_verify returned 1
(3) eap_tls : eaptls_process returned 13
(3) eap : New EAP session, adding 'State' attribute to reply 0x9fff236a9cfa2e86
(3) [eap] = handled
(3) } # authenticate = handled
(3) Sending Access-Challenge packet to host 172.16.0.20 port 32769, id=197, length=0
(3) EAP-Message = 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
1639f71f57ade5862b9dc8ade01113380c4bb
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0x9fff236a9cfa2e86923483cd2cba31b1
Sending Access-Challenge Id 197 from 172.16.110.17:1812 to 172.16.0.20:32769
EAP-Message = 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
f71f57ade5862b9dc8ade01113380c4b
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x9fff236a9cfa2e86923483cd2cba31b1
(3) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 198 from 172.16.0.20:32769 to 172.16.110.17:1812 length 1701
User-Name = 'mib at example.cz'
Chargeable-User-Identity = 0x00
Location-Capable = Civix-Location
Calling-Station-Id = '20-10-7a-01-c1-80'
Called-Station-Id = 'd0-c2-82-e0-cb-80'
NAS-Port = 1
Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4'
Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574'
NAS-IP-Address = 172.16.0.20
NAS-Identifier = 'wlc'
Airespace-Wlan-Id = 3
Service-Type = Framed-User
Framed-MTU = 1300
NAS-Port-Type = Wireless-802.11
Tunnel-Type:0 = VLAN
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Private-Group-Id:0 = '200'
EAP-Message = 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
b26256ecfafcdcb0ffca2cb6bc5848ca
State = 0x9fff236a9cfa2e86923483cd2cba31b1
Message-Authenticator = 0x9baeed985e6260828cc3be11bb79931d
(4) Received Access-Request packet from host 172.16.0.20 port 32769, id=198, length=1701
(4) User-Name = 'mib at example.cz'
(4) Chargeable-User-Identity = 0x00
(4) Location-Capable = Civix-Location
(4) Calling-Station-Id = '20-10-7a-01-c1-80'
(4) Called-Station-Id = 'd0-c2-82-e0-cb-80'
(4) NAS-Port = 1
(4) Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4'
(4) Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574'
(4) NAS-IP-Address = 172.16.0.20
(4) NAS-Identifier = 'wlc'
(4) Airespace-Wlan-Id = 3
(4) Service-Type = Framed-User
(4) Framed-MTU = 1300
(4) NAS-Port-Type = Wireless-802.11
(4) Tunnel-Type:0 = VLAN
(4) Tunnel-Medium-Type:0 = IEEE-802
(4) Tunnel-Private-Group-Id:0 = '200'
(4) EAP-Message = 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
6459b26256ecfafcdcb0ffca2cb6bc5848ca3
(4) State = 0x9fff236a9cfa2e86923483cd2cba31b1
(4) Message-Authenticator = 0x9baeed985e6260828cc3be11bb79931d
(4) # Executing section authorize from file /etc/raddb/sites-enabled/default
(4) authorize {
(4) filter_username filter_username {
(4) if (!&User-Name)
(4) if (!&User-Name) -> FALSE
(4) if (&User-Name =~ / /)
(4) if (&User-Name =~ / /) -> FALSE
(4) if (&User-Name =~ /@.*@/ )
(4) if (&User-Name =~ /@.*@/ ) -> FALSE
(4) if (&User-Name =~ /\\.\\./ )
(4) if (&User-Name =~ /\\.\\./ ) -> FALSE
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(4) if (&User-Name =~ /\\.$/)
(4) if (&User-Name =~ /\\.$/) -> FALSE
(4) if (&User-Name =~ /@\\./)
(4) if (&User-Name =~ /@\\./) -> FALSE
(4) } # filter_username filter_username = notfound
(4) [preprocess] = ok
(4) [chap] = noop
(4) [mschap] = noop
(4) [digest] = noop
(4) suffix : Checking for suffix after "@"
(4) suffix : Looking up realm "example.cz" for User-Name = "mib at example.cz"
(4) suffix : No such realm "example.cz"
(4) [suffix] = noop
(4) eap : Peer sent code Response (2) ID 5 length 1424
(4) eap : No EAP Start, assuming it's an on-going EAP conversation
(4) [eap] = updated
(4) [files] = noop
(4) [expiration] = noop
(4) [logintime] = noop
(4) [pap] = noop
(4) } # authorize = updated
(4) Found Auth-Type = EAP
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4) authenticate {
(4) eap : Expiring EAP session with state 0x9fff236a9cfa2e86
(4) eap : Finished EAP session with state 0x9fff236a9cfa2e86
(4) eap : Previous EAP request found for state 0x9fff236a9cfa2e86, released from the list
(4) eap : Peer sent method TLS (13)
(4) eap : EAP TLS (13)
(4) eap : Calling eap_tls to process EAP data
(4) eap_tls : Authenticate
(4) eap_tls : processing EAP-TLS
TLS Length 1414
(4) eap_tls : Length Included
(4) eap_tls : eaptls_verify returned 11
(4) eap_tls : <<< TLS 1.0 Handshake [length 03fa], Certificate
(4) eap_tls : chain-depth=1,
(4) eap_tls : error=0
(4) eap_tls : --> User-Name = mib at example.cz
(4) eap_tls : --> BUF-Name = SelfSigned certificate
(4) eap_tls : --> subject = /C=CZ/ST=CzechRepublic/L=NorthMoravia/O=AIB/emailAddress=it at example.cz/CN=SelfSigned certificate
(4) eap_tls : --> issuer = /C=CZ/ST=CzechRepublic/L=NorthMoravia/O=AIB/emailAddress=it at example.cz/CN=SelfSigned certificate
(4) eap_tls : --> verify return:1
(4) eap_tls : chain-depth=0,
(4) eap_tls : error=0
(4) eap_tls : --> User-Name = mib at example.cz
(4) eap_tls : --> BUF-Name = mib at example.cz
(4) eap_tls : --> subject = /C=CZ/ST=CzechRepublic/O=AIB/CN=mib at example.cz/emailAddress=it at example.cz
(4) eap_tls : --> issuer = /C=CZ/ST=CzechRepublic/L=NorthMoravia/O=AIB/emailAddress=it at example.cz/CN=SelfSigned certificate
(4) eap_tls : --> verify return:1
(4) eap_tls : TLS_accept: SSLv3 read client certificate A
(4) eap_tls : <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange
(4) eap_tls : TLS_accept: SSLv3 read client key exchange A
(4) eap_tls : <<< TLS 1.0 Handshake [length 0106], CertificateVerify
(4) eap_tls : TLS_accept: SSLv3 read certificate verify A
(4) eap_tls : <<< TLS 1.0 ChangeCipherSpec [length 0001]
(4) eap_tls : <<< TLS 1.0 Handshake [length 0010], Finished
(4) eap_tls : TLS_accept: SSLv3 read finished A
(4) eap_tls : >>> TLS 1.0 ChangeCipherSpec [length 0001]
(4) eap_tls : TLS_accept: SSLv3 write change cipher spec A
(4) eap_tls : >>> TLS 1.0 Handshake [length 0010], Finished
(4) eap_tls : TLS_accept: SSLv3 write finished A
(4) eap_tls : TLS_accept: SSLv3 flush data
(4) eap_tls : (other): SSL negotiation finished successfully
SSL Connection Established
(4) eap_tls : eaptls_process returned 13
(4) eap : New EAP session, adding 'State' attribute to reply 0x9fff236a9bf92e86
(4) [eap] = handled
(4) } # authenticate = handled
(4) Sending Access-Challenge packet to host 172.16.0.20 port 32769, id=198, length=0
(4) EAP-Message = 0x010600450d800000003b140301000101160301003092eb4fba004b8fca7b15972c8d337c0f3b6660c6102d39d59fd772f1e11088113288b3fbdbfe92d783ab6d34f0aba8cc
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0x9fff236a9bf92e86923483cd2cba31b1
Sending Access-Challenge Id 198 from 172.16.110.17:1812 to 172.16.0.20:32769
EAP-Message = 0x010600450d800000003b140301000101160301003092eb4fba004b8fca7b15972c8d337c0f3b6660c6102d39d59fd772f1e11088113288b3fbdbfe92d783ab6d34f0aba8cc
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x9fff236a9bf92e86923483cd2cba31b1
(4) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 199 from 172.16.0.20:32769 to 172.16.110.17:1812 length 273
User-Name = 'mib at example.cz'
Chargeable-User-Identity = 0x00
Location-Capable = Civix-Location
Calling-Station-Id = '20-10-7a-01-c1-80'
Called-Station-Id = 'd0-c2-82-e0-cb-80'
NAS-Port = 1
Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4'
Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574'
NAS-IP-Address = 172.16.0.20
NAS-Identifier = 'wlc'
Airespace-Wlan-Id = 3
Service-Type = Framed-User
Framed-MTU = 1300
NAS-Port-Type = Wireless-802.11
Tunnel-Type:0 = VLAN
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Private-Group-Id:0 = '200'
EAP-Message = 0x020600060d00
State = 0x9fff236a9bf92e86923483cd2cba31b1
Message-Authenticator = 0x2430e3517ff9c9dc9ef80772144fcb31
(5) Received Access-Request packet from host 172.16.0.20 port 32769, id=199, length=273
(5) User-Name = 'mib at example.cz'
(5) Chargeable-User-Identity = 0x00
(5) Location-Capable = Civix-Location
(5) Calling-Station-Id = '20-10-7a-01-c1-80'
(5) Called-Station-Id = 'd0-c2-82-e0-cb-80'
(5) NAS-Port = 1
(5) Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4'
(5) Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574'
(5) NAS-IP-Address = 172.16.0.20
(5) NAS-Identifier = 'wlc'
(5) Airespace-Wlan-Id = 3
(5) Service-Type = Framed-User
(5) Framed-MTU = 1300
(5) NAS-Port-Type = Wireless-802.11
(5) Tunnel-Type:0 = VLAN
(5) Tunnel-Medium-Type:0 = IEEE-802
(5) Tunnel-Private-Group-Id:0 = '200'
(5) EAP-Message = 0x020600060d00
(5) State = 0x9fff236a9bf92e86923483cd2cba31b1
(5) Message-Authenticator = 0x2430e3517ff9c9dc9ef80772144fcb31
(5) # Executing section authorize from file /etc/raddb/sites-enabled/default
(5) authorize {
(5) filter_username filter_username {
(5) if (!&User-Name)
(5) if (!&User-Name) -> FALSE
(5) if (&User-Name =~ / /)
(5) if (&User-Name =~ / /) -> FALSE
(5) if (&User-Name =~ /@.*@/ )
(5) if (&User-Name =~ /@.*@/ ) -> FALSE
(5) if (&User-Name =~ /\\.\\./ )
(5) if (&User-Name =~ /\\.\\./ ) -> FALSE
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(5) if (&User-Name =~ /\\.$/)
(5) if (&User-Name =~ /\\.$/) -> FALSE
(5) if (&User-Name =~ /@\\./)
(5) if (&User-Name =~ /@\\./) -> FALSE
(5) } # filter_username filter_username = notfound
(5) [preprocess] = ok
(5) [chap] = noop
(5) [mschap] = noop
(5) [digest] = noop
(5) suffix : Checking for suffix after "@"
(5) suffix : Looking up realm "example.cz" for User-Name = "mib at example.cz"
(5) suffix : No such realm "example.cz"
(5) [suffix] = noop
(5) eap : Peer sent code Response (2) ID 6 length 6
(5) eap : No EAP Start, assuming it's an on-going EAP conversation
(5) [eap] = updated
(5) [files] = noop
(5) [expiration] = noop
(5) [logintime] = noop
(5) [pap] = noop
(5) } # authorize = updated
(5) Found Auth-Type = EAP
(5) # Executing group from file /etc/raddb/sites-enabled/default
(5) authenticate {
(5) eap : Expiring EAP session with state 0x9fff236a9bf92e86
(5) eap : Finished EAP session with state 0x9fff236a9bf92e86
(5) eap : Previous EAP request found for state 0x9fff236a9bf92e86, released from the list
(5) eap : Peer sent method TLS (13)
(5) eap : EAP TLS (13)
(5) eap : Calling eap_tls to process EAP data
(5) eap_tls : Authenticate
(5) eap_tls : processing EAP-TLS
(5) eap_tls : Received TLS ACK
(5) eap_tls : Received TLS ACK
(5) eap_tls : ACK handshake is finished
(5) eap_tls : eaptls_verify returned 3
(5) eap_tls : eaptls_process returned 3
(5) eap_tls : Processing EAP-TLS Certificate check:
(5) server check-eap-tls {
(5) Request:
User-Name = 'mib at example.cz'
Chargeable-User-Identity = 0x00
Location-Capable = Civix-Location
Calling-Station-Id = '20-10-7a-01-c1-80'
Called-Station-Id = 'd0-c2-82-e0-cb-80'
NAS-Port = 1
Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4'
Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574'
NAS-IP-Address = 172.16.0.20
NAS-Identifier = 'wlc'
Airespace-Wlan-Id = 3
Service-Type = Framed-User
Framed-MTU = 1300
NAS-Port-Type = Wireless-802.11
Tunnel-Type:0 = VLAN
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Private-Group-Id:0 = '200'
EAP-Message = 0x020600060d00
State = 0x9fff236a9bf92e86923483cd2cba31b1
Message-Authenticator = 0x2430e3517ff9c9dc9ef80772144fcb31
Event-Timestamp = 'Dec 5 2015 19:24:37 CET'
EAP-Type = TLS
(5) # Executing section authorize from file /etc/raddb/sites-enabled/check-eap-tls
(5) authorize {
(5) update config {
(5) Auth-Type := Accept
(5) } # update config = noop
(5) if ("%{TLS-Client-Cert-Common-Name}" =~ /^[A-z.]*@example\.cz$/)
(5) EXPAND %{TLS-Client-Cert-Common-Name}
(5) -->
(5) if ("%{TLS-Client-Cert-Common-Name}" =~ /^[A-z.]*@example\.cz$/) -> FALSE
(5) else else {
(5) update config {
(5) Auth-Type := Reject
(5) } # update config = noop
(5) update reply {
(5) Reply-Message := 'Your certificate is not valid.'
(5) } # update reply = noop
(5) } # else else = noop
(5) auth_log : EXPAND /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(5) auth_log : --> /var/log/radius/radacct/172.16.0.20/auth-detail-20151205
(5) auth_log : /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/172.16.0.20/auth-detail-20151205
(5) auth_log : EXPAND %t
(5) auth_log : --> Sat Dec 5 19:24:37 2015
(5) [auth_log] = ok
(5) } # authorize = ok
(5) Found Auth-Type = Reject
(5) Auth-Type = Reject, rejecting user
(5) Failed to authenticate the user
(5) Using Post-Auth-Type Reject
(5) Reply:
Reply-Message := 'Your certificate is not valid.'
(5) } # server check-eap-tls
(5) eap_tls : Certificates were rejected by the virtual server
(5) ERROR: eap : Failed continuing EAP TLS (13) session. EAP sub-module failed
(5) eap : Failed in EAP select
(5) [eap] = invalid
(5) } # authenticate = invalid
(5) Failed to authenticate the user
(5) Using Post-Auth-Type Reject
(5) # Executing group from file /etc/raddb/sites-enabled/default
(5) Post-Auth-Type REJECT {
(5) attr_filter.access_reject : EXPAND %{User-Name}
(5) attr_filter.access_reject : --> mib at example.cz
(5) attr_filter.access_reject : Matched entry DEFAULT at line 11
(5) [attr_filter.access_reject] = updated
(5) eap : Reply already contained an EAP-Message, not inserting EAP-Failure
(5) [eap] = noop
(5) remove_reply_message_if_eap remove_reply_message_if_eap {
(5) if (&reply:EAP-Message && &reply:Reply-Message)
(5) if (&reply:EAP-Message && &reply:Reply-Message) -> TRUE
(5) if (&reply:EAP-Message && &reply:Reply-Message) {
(5) update reply {
(5) Reply-Message !* ANY
(5) } # update reply = noop
(5) } # if (&reply:EAP-Message && &reply:Reply-Message) = noop
(5) ... skipping else for request 5: Preceding "if" was taken
(5) } # remove_reply_message_if_eap remove_reply_message_if_eap = noop
(5) } # Post-Auth-Type REJECT = updated
(5) Delaying response for 1 seconds
Waking up in 0.2 seconds.
Waking up in 0.6 seconds.
(5) Sending delayed response
(5) Sending Access-Reject packet to host 172.16.0.20 port 32769, id=199, length=0
(5) EAP-Message = 0x04060004
(5) Message-Authenticator = 0x00000000000000000000000000000000
Sending Access-Reject Id 199 from 172.16.110.17:1812 to 172.16.0.20:32769
EAP-Message = 0x04060004
Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.8 seconds.
(0) Cleaning up request packet ID 194 with timestamp +10
(1) Cleaning up request packet ID 195 with timestamp +10
(2) Cleaning up request packet ID 196 with timestamp +10
(3) Cleaning up request packet ID 197 with timestamp +10
(4) Cleaning up request packet ID 198 with timestamp +11
(5) Cleaning up request packet ID 199 with timestamp +11
Ready to process requests
More information about the Freeradius-Users
mailing list