radgroupreply not read on 2.2.6
Lorenzo Milesi
maxxer at ufficyo.com
Thu Feb 12 12:44:11 CET 2015
Hi. I know this is a trivial and old question, but I've checked back and forth and cannot figure out what I am doing wrong.
This is the user in SQL:
Radcheck
id username attribute op value
14123 MAXSPDGROUP MD5-Password := 485b93396235830f29f049c462a97a60
Radusergroup
id username groupname priority
182424 MAXSPDGROUP noaccess 99
182423 MAXSPDGROUP c_yop1 30
Radgroupcheck
id groupname attribute op value
22 c_yop1 NAS-Identifier =~ yop101|yop102|int04
3 noaccess Auth-Type = Reject
Radgroupreply
id groupname attribute op value
45 c_yop1 Idle-Timeout = 300
46 c_yop1 Acct-Interim-Interval = 240
73 c_yop1 WISPr-Bandwidth-Max-Up = 20
When I make a request:
echo "User-Name=MAXSPDGROUP,password=MAXSPDGROUP,NAS-Identifier=yop101,NAS-IP-Address=10.12.22.159" | /usr/bin/radclient localhost:1812 auth radsecret
The reply doesn't contain the Radgroupreply attributes: Received response ID 248, code 2, length = 20.
According to the docs [1]: "The user IS found in radcheck, the check items DO match AND the read_groups directive is set to 'yes'"
The user IS found in radcheck, password match, read_groups is yes, so why those replies are not sent back to the request, since the NAS-Identifier regexp matches?
Reading on the docs: "For each group this user is a member of, the corresponding check items are pulled from radgroupcheck table and compared with the request. If there is a match, the reply items for this group are pulled from the radgroupreply table and applied."
So even if the "noaccess" group don't match, the c_yop1 does and it should return the corresponding group reply items.
I know there must be something wrong but I cannot figure out. Any hint is welcome.
Thanks
Following here request's debug:
freeradius: FreeRADIUS Version 2.2.6, for host x86_64-pc-linux-gnu, built on Feb 12 2015 at 12:10:02
Copyright (C) 1999-2013 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License.
For more information about these matters, see the file named COPYRIGHT.
Starting - reading configuration files ...
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/modules/
including configuration file /etc/freeradius/modules/realm
including configuration file /etc/freeradius/modules/otp
including configuration file /etc/freeradius/modules/dhcp_sqlippool
including configuration file /etc/freeradius/sql/mysql/ippool-dhcp.conf
including configuration file /etc/freeradius/modules/perl
including configuration file /etc/freeradius/modules/ldap
including configuration file /etc/freeradius/modules/expr
including configuration file /etc/freeradius/modules/radutmp
including configuration file /etc/freeradius/modules/mac2vlan
including configuration file /etc/freeradius/modules/inner-eap
including configuration file /etc/freeradius/modules/ippool
including configuration file /etc/freeradius/modules/linelog
including configuration file /etc/freeradius/modules/echo
including configuration file /etc/freeradius/modules/files
including configuration file /etc/freeradius/modules/radrelay
including configuration file /etc/freeradius/modules/attr_rewrite
including configuration file /etc/freeradius/modules/etc_group
including configuration file /etc/freeradius/modules/detail.log
including configuration file /etc/freeradius/modules/sql_log
including configuration file /etc/freeradius/modules/opendirectory
including configuration file /etc/freeradius/modules/digest
including configuration file /etc/freeradius/modules/attr_filter
including configuration file /etc/freeradius/modules/pam
including configuration file /etc/freeradius/modules/replicate
including configuration file /etc/freeradius/modules/ntlm_auth
including configuration file /etc/freeradius/modules/unix
including configuration file /etc/freeradius/modules/passwd
including configuration file /etc/freeradius/modules/preprocess
including configuration file /etc/freeradius/modules/logintime
including configuration file /etc/freeradius/modules/chap
including configuration file /etc/freeradius/modules/mschap
including configuration file /etc/freeradius/modules/detail.example.com
including configuration file /etc/freeradius/modules/mac2ip
including configuration file /etc/freeradius/modules/krb5
including configuration file /etc/freeradius/modules/acct_unique
including configuration file /etc/freeradius/modules/detail
including configuration file /etc/freeradius/modules/checkval
including configuration file /etc/freeradius/modules/expiration
including configuration file /etc/freeradius/modules/rediswho
including configuration file /etc/freeradius/modules/dynamic_clients
including configuration file /etc/freeradius/modules/cache
including configuration file /etc/freeradius/modules/raw
including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login
including configuration file /etc/freeradius/modules/smbpasswd
including configuration file /etc/freeradius/modules/redis
including configuration file /etc/freeradius/modules/exec
including configuration file /etc/freeradius/modules/counter
including configuration file /etc/freeradius/modules/pap
including configuration file /etc/freeradius/modules/wimax
including configuration file /etc/freeradius/modules/smsotp
including configuration file /etc/freeradius/modules/always
including configuration file /etc/freeradius/modules/soh
including configuration file /etc/freeradius/modules/policy
including configuration file /etc/freeradius/modules/cui
including configuration file /etc/freeradius/modules/sradutmp
including configuration file /etc/freeradius/eap.conf
including configuration file /etc/freeradius/sql.conf
including configuration file /etc/freeradius/sql/mysql/dialup.conf
including configuration file /etc/freeradius/sql/mysql/counter.conf
including configuration file /etc/freeradius/policy.conf
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/control-socket
including configuration file /etc/freeradius/sites-enabled/default
including configuration file /etc/freeradius/sites-enabled/status
including configuration file /etc/freeradius/sites-enabled/inav-dynclients
main {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
including dictionary file /etc/freeradius/dictionary
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
allow_vulnerable_openssl = no
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
require_message_authenticator = yes
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
realm NULL {
authhost = LOCAL
accthost = LOCAL
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "radsecret"
shortname = "localhost"
nastype = "other"
}
client dymamic {
ipaddr = 0.0.0.0
netmask = 0
require_message_authenticator = no
dynamic_clients = "dynamic_client_server"
lifetime = 12600
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating module "exec" from file /etc/freeradius/modules/exec
exec {
wait = yes
input_pairs = "request"
shell_escape = yes
timeout = 10
}
Module: Linked to module rlm_expr
Module: Instantiating module "expr" from file /etc/freeradius/modules/expr
Module: Linked to module rlm_expiration
Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
Module: Linked to module rlm_raw
Module: Instantiating module "raw" from file /etc/freeradius/modules/raw
}
radiusd: #### Loading Virtual Servers ####
server { # from file
modules {
Module: Creating Post-Auth-Type = REJECT
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating module "pap" from file /etc/freeradius/modules/pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating module "chap" from file /etc/freeradius/modules/chap
Module: Linked to module rlm_mschap
Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap
mschap {
use_mppe = yes
require_encryption = yes
require_strong = yes
with_ntdomain_hack = no
allow_retry = yes
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess
preprocess {
huntgroups = "/etc/freeradius/huntgroups"
hints = "/etc/freeradius/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
reading pairlist file /etc/freeradius/huntgroups
reading pairlist file /etc/freeradius/hints
Module: Linked to module rlm_realm
Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating module "files" from file /etc/freeradius/modules/files
files {
usersfile = "/etc/freeradius/users"
acctusersfile = "/etc/freeradius/acct_users"
preproxy_usersfile = "/etc/freeradius/preproxy_users"
compat = "no"
}
reading pairlist file /etc/freeradius/users
reading pairlist file /etc/freeradius/acct_users
reading pairlist file /etc/freeradius/preproxy_users
Module: Linked to module rlm_sql
Module: Instantiating module "sql" from file /etc/freeradius/sql.conf
sql {
driver = "rlm_sql_mysql"
server = "localhost"
port = ""
login = "radius"
password = "HFFU7Ms9d4"
radius_db = "radius"
read_groups = yes
sqltrace = no
sqltracefile = "/var/log/freeradius/sqltrace.sql"
readclients = no
deletestalesessions = yes
num_sql_socks = 25
lifetime = 0
max_queries = 0
sql_user_name = "%{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}}"
default_user_profile = ""
nas_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' OR groupname = '%{HuntGroup-Name}' ORDER BY id"
authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' OR groupname = '%{HuntGroup-Name}' ORDER BY id"
accounting_onoff_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = unix_timestamp('%S') - unix_timestamp(acctstarttime), acctterminatecause = 'NAS-Reboot', acctstopdelay = %{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL AND calledstationid = '%{Called-Station-Id}' AND acctstarttime <= '%S'"
accounting_update_query = " UPDATE radacct SET framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'"
accounting_update_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctsessiontime, acctauthentic, connectinfo_start, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, servicetype, framedprotocol, framedipaddress, acctstartdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')"
accounting_start_query = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')"
accounting_start_query_alt = " UPDATE radacct SET acctstarttime = '%S', acctstartdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_start = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'"
accounting_stop_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'"
accounting_stop_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{%{Acct-Delay-Time}:-0}')"
group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority"
connect_failure_retry_delay = 60
simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
postauth_query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')"
safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to radius at localhost:/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
rlm_sql (sql): starting 5
rlm_sql (sql): Attempting to connect rlm_sql_mysql #5
rlm_sql_mysql: Starting connect to MySQL server for #5
rlm_sql (sql): Connected new DB handle, #5
rlm_sql (sql): starting 6
rlm_sql (sql): Attempting to connect rlm_sql_mysql #6
rlm_sql_mysql: Starting connect to MySQL server for #6
rlm_sql (sql): Connected new DB handle, #6
rlm_sql (sql): starting 7
rlm_sql (sql): Attempting to connect rlm_sql_mysql #7
rlm_sql_mysql: Starting connect to MySQL server for #7
rlm_sql (sql): Connected new DB handle, #7
rlm_sql (sql): starting 8
rlm_sql (sql): Attempting to connect rlm_sql_mysql #8
rlm_sql_mysql: Starting connect to MySQL server for #8
rlm_sql (sql): Connected new DB handle, #8
rlm_sql (sql): starting 9
rlm_sql (sql): Attempting to connect rlm_sql_mysql #9
rlm_sql_mysql: Starting connect to MySQL server for #9
rlm_sql (sql): Connected new DB handle, #9
rlm_sql (sql): starting 10
rlm_sql (sql): Attempting to connect rlm_sql_mysql #10
rlm_sql_mysql: Starting connect to MySQL server for #10
rlm_sql (sql): Connected new DB handle, #10
rlm_sql (sql): starting 11
rlm_sql (sql): Attempting to connect rlm_sql_mysql #11
rlm_sql_mysql: Starting connect to MySQL server for #11
rlm_sql (sql): Connected new DB handle, #11
rlm_sql (sql): starting 12
rlm_sql (sql): Attempting to connect rlm_sql_mysql #12
rlm_sql_mysql: Starting connect to MySQL server for #12
rlm_sql (sql): Connected new DB handle, #12
rlm_sql (sql): starting 13
rlm_sql (sql): Attempting to connect rlm_sql_mysql #13
rlm_sql_mysql: Starting connect to MySQL server for #13
rlm_sql (sql): Connected new DB handle, #13
rlm_sql (sql): starting 14
rlm_sql (sql): Attempting to connect rlm_sql_mysql #14
rlm_sql_mysql: Starting connect to MySQL server for #14
rlm_sql (sql): Connected new DB handle, #14
rlm_sql (sql): starting 15
rlm_sql (sql): Attempting to connect rlm_sql_mysql #15
rlm_sql_mysql: Starting connect to MySQL server for #15
rlm_sql (sql): Connected new DB handle, #15
rlm_sql (sql): starting 16
rlm_sql (sql): Attempting to connect rlm_sql_mysql #16
rlm_sql_mysql: Starting connect to MySQL server for #16
rlm_sql (sql): Connected new DB handle, #16
rlm_sql (sql): starting 17
rlm_sql (sql): Attempting to connect rlm_sql_mysql #17
rlm_sql_mysql: Starting connect to MySQL server for #17
rlm_sql (sql): Connected new DB handle, #17
rlm_sql (sql): starting 18
rlm_sql (sql): Attempting to connect rlm_sql_mysql #18
rlm_sql_mysql: Starting connect to MySQL server for #18
rlm_sql (sql): Connected new DB handle, #18
rlm_sql (sql): starting 19
rlm_sql (sql): Attempting to connect rlm_sql_mysql #19
rlm_sql_mysql: Starting connect to MySQL server for #19
rlm_sql (sql): Connected new DB handle, #19
rlm_sql (sql): starting 20
rlm_sql (sql): Attempting to connect rlm_sql_mysql #20
rlm_sql_mysql: Starting connect to MySQL server for #20
rlm_sql (sql): Connected new DB handle, #20
rlm_sql (sql): starting 21
rlm_sql (sql): Attempting to connect rlm_sql_mysql #21
rlm_sql_mysql: Starting connect to MySQL server for #21
rlm_sql (sql): Connected new DB handle, #21
rlm_sql (sql): starting 22
rlm_sql (sql): Attempting to connect rlm_sql_mysql #22
rlm_sql_mysql: Starting connect to MySQL server for #22
rlm_sql (sql): Connected new DB handle, #22
rlm_sql (sql): starting 23
rlm_sql (sql): Attempting to connect rlm_sql_mysql #23
rlm_sql_mysql: Starting connect to MySQL server for #23
rlm_sql (sql): Connected new DB handle, #23
rlm_sql (sql): starting 24
rlm_sql (sql): Attempting to connect rlm_sql_mysql #24
rlm_sql_mysql: Starting connect to MySQL server for #24
rlm_sql (sql): Connected new DB handle, #24
Module: Linked to module rlm_counter
Module: Instantiating module "daily" from file /etc/freeradius/modules/counter
counter daily {
filename = "/etc/freeradius/db.daily"
key = "User-Name"
reset = "daily"
count-attribute = "Acct-Session-Time"
counter-name = "Daily-Session-Time"
check-name = "Max-Daily-Session"
reply-name = "Session-Timeout"
allowed-servicetype = "Framed-User"
cache-size = 5000
}
rlm_counter: Counter attribute Daily-Session-Time is number 11273
rlm_counter: Current Time: 1423739792 [2015-02-12 12:16:32], Next reset 1423782000 [2015-02-13 00:00:00]
Module: Linked to module rlm_sqlcounter
Module: Instantiating module "noresetcounter" from file /etc/freeradius/sql/mysql/counter.conf
sqlcounter noresetcounter {
counter-name = "Max-All-Session-Time"
check-name = "Max-All-Session"
reply-name = "Session-Timeout"
key = "User-Name"
sqlmod-inst = "sql"
query = "SELECT IFNULL(SUM(AcctSessionTime),0) FROM radacct WHERE UserName='%{%k}'"
reset = "never"
safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
rlm_sqlcounter: Check attribute Max-All-Session is number 11276
rlm_sqlcounter: Current Time: 1423739792 [2015-02-12 12:16:32], Next reset 0 [2015-02-12 12:00:00]
rlm_sqlcounter: Current Time: 1423739792 [2015-02-12 12:16:32], Prev reset 0 [2015-02-12 12:00:00]
Module: Linked to module rlm_always
Module: Instantiating module "reject" from file /etc/freeradius/modules/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
Module: Instantiating module "dailycounter" from file /etc/freeradius/sql/mysql/counter.conf
sqlcounter dailycounter {
counter-name = "Daily-Session-Time"
check-name = "Max-Daily-Session"
reply-name = "Session-Timeout"
key = "User-Name"
sqlmod-inst = "sql"
query = "SELECT SUM(acctsessiontime - GREATEST((%b - UNIX_TIMESTAMP(acctstarttime)), 0)) FROM radacct WHERE username = '%{%k}' AND UNIX_TIMESTAMP(acctstarttime) + acctsessiontime > '%b'"
reset = "daily"
safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
rlm_sqlcounter: Check attribute Max-Daily-Session is number 11274
rlm_sqlcounter: Current Time: 1423739792 [2015-02-12 12:16:32], Next reset 1423782000 [2015-02-13 00:00:00]
rlm_sqlcounter: Current Time: 1423739792 [2015-02-12 12:16:32], Prev reset 1423695600 [2015-02-12 00:00:00]
Module: Instantiating module "dailycounterlocation" from file /etc/freeradius/sql/mysql/counter.conf
sqlcounter dailycounterlocation {
counter-name = "Max-Daily-Session-Location"
check-name = "Max-Daily-Session-Location"
reply-name = "Session-Timeout"
key = "User-Name"
sqlmod-inst = "sql"
query = "SELECT SUM(acctsessiontime - GREATEST((%b - UNIX_TIMESTAMP(acctstarttime)), 0)) FROM radacct WHERE username = '%{%k}' AND (UNIX_TIMESTAMP(acctstarttime) + acctsessiontime > '%b') AND calledstationid = '%{Called-Station-Id}' "
reset = "daily"
safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
rlm_sqlcounter: Check attribute Max-Daily-Session-Location is number 954138731
rlm_sqlcounter: Current Time: 1423739792 [2015-02-12 12:16:32], Next reset 1423782000 [2015-02-13 00:00:00]
rlm_sqlcounter: Current Time: 1423739792 [2015-02-12 12:16:32], Prev reset 1423695600 [2015-02-12 00:00:00]
Module: Instantiating module "monthlycounter" from file /etc/freeradius/sql/mysql/counter.conf
sqlcounter monthlycounter {
counter-name = "Monthly-Session-Time"
check-name = "Max-Monthly-Session"
reply-name = "Session-Timeout"
key = "User-Name"
sqlmod-inst = "sql"
query = "SELECT SUM(acctsessiontime - GREATEST((%b - UNIX_TIMESTAMP(acctstarttime)), 0)) FROM radacct WHERE username='%{%k}' AND UNIX_TIMESTAMP(acctstarttime) + acctsessiontime > '%b'"
reset = "monthly"
safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
rlm_sqlcounter: Check attribute Max-Monthly-Session is number 11278
rlm_sqlcounter: Current Time: 1423739792 [2015-02-12 12:16:32], Next reset 1425164400 [2015-03-01 00:00:00]
rlm_sqlcounter: Current Time: 1423739792 [2015-02-12 12:16:32], Prev reset 1422745200 [2015-02-01 00:00:00]
Module: Instantiating module "counterChilliSpotMaxTotalOctets" from file /etc/freeradius/sql/mysql/counter.conf
sqlcounter counterChilliSpotMaxTotalOctets {
counter-name = "ChilliSpot-Max-All-Octets"
check-name = "ChilliSpot-Max-All-Octets"
reply-name = "ChilliSpot-Max-All-Octets"
key = "User-Name"
sqlmod-inst = "sql"
query = "SELECT SUM(acctinputoctets) + SUM(acctoutputoctets) FROM radacct WHERE username='%{%k}'"
reset = "never"
safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
rlm_sqlcounter: Check attribute ChilliSpot-Max-All-Octets is number 954138730
rlm_sqlcounter: Current Time: 1423739792 [2015-02-12 12:16:32], Next reset 0 [2015-02-12 12:00:00]
rlm_sqlcounter: Current Time: 1423739792 [2015-02-12 12:16:32], Prev reset 0 [2015-02-12 12:00:00]
Module: Instantiating module "counterChilliSpotMaxTotalOctetsDaily" from file /etc/freeradius/sql/mysql/counter.conf
sqlcounter counterChilliSpotMaxTotalOctetsDaily {
counter-name = "ChilliSpot-Max-Daily-Octets"
check-name = "ChilliSpot-Max-Daily-Octets"
reply-name = "ChilliSpot-Max-All-Octets"
key = "User-Name"
sqlmod-inst = "sql"
query = "SELECT IFNULL((SUM(AcctInputOctets + AcctOutputOctets)),0) FROM radacct WHERE UserName='%{%k}' AND UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'"
reset = "daily"
safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
rlm_sqlcounter: Check attribute ChilliSpot-Max-Daily-Octets is number 954138727
rlm_sqlcounter: Current Time: 1423739792 [2015-02-12 12:16:32], Next reset 1423782000 [2015-02-13 00:00:00]
rlm_sqlcounter: Current Time: 1423739792 [2015-02-12 12:16:32], Prev reset 1423695600 [2015-02-12 00:00:00]
Module: Instantiating module "counterChilliSpotMaxTotalOctetsWeekly" from file /etc/freeradius/sql/mysql/counter.conf
sqlcounter counterChilliSpotMaxTotalOctetsWeekly {
counter-name = "ChilliSpot-Max-Weekly-Octets"
check-name = "ChilliSpot-Max-Weekly-Octets"
reply-name = "ChilliSpot-Max-Total-Octets"
key = "User-Name"
sqlmod-inst = "sql"
query = "SELECT IFNULL((SUM(AcctInputOctets + AcctOutputOctets)),0) FROM radacct WHERE UserName='%{%k}' AND UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'"
reset = "weekly"
safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
rlm_sqlcounter: Check attribute ChilliSpot-Max-Weekly-Octets is number 954138729
rlm_sqlcounter: Current Time: 1423739792 [2015-02-12 12:16:32], Next reset 1423954800 [2015-02-15 00:00:00]
rlm_sqlcounter: Current Time: 1423739792 [2015-02-12 12:16:32], Prev reset 1423436400 [2015-02-09 00:00:00]
Module: Instantiating module "counterChilliSpotMaxTotalOctetsMonthly" from file /etc/freeradius/sql/mysql/counter.conf
sqlcounter counterChilliSpotMaxTotalOctetsMonthly {
counter-name = "ChilliSpot-Max-Monthly-Octets"
check-name = "ChilliSpot-Max-Monthly-Octets"
reply-name = "ChilliSpot-Max-Total-Octets"
key = "User-Name"
sqlmod-inst = "sql"
query = "SELECT IFNULL((SUM(AcctInputOctets + AcctOutputOctets)),0) FROM radacct WHERE UserName='%{%k}' AND UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'"
reset = "weekly"
safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
rlm_sqlcounter: Check attribute ChilliSpot-Max-Monthly-Octets is number 954138728
rlm_sqlcounter: Current Time: 1423739792 [2015-02-12 12:16:32], Next reset 1423954800 [2015-02-15 00:00:00]
rlm_sqlcounter: Current Time: 1423739792 [2015-02-12 12:16:32], Prev reset 1423436400 [2015-02-09 00:00:00]
Module: Instantiating module "chillispot_max_bytes_in" from file /etc/freeradius/sql/mysql/counter.conf
sqlcounter chillispot_max_bytes_in {
counter-name = "ChilliSpot-Max-Input-Octets"
check-name = "ChilliSpot-Max-Input-Octets"
reply-name = "ChilliSpot-Max-Input-Octets"
key = "User-Name"
sqlmod-inst = "sql"
query = "SELECT SUM(acctinputoctets) FROM radacct WHERE username='%{%k}'"
reset = "never"
safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
rlm_sqlcounter: Check attribute ChilliSpot-Max-Input-Octets is number 954138625
rlm_sqlcounter: Current Time: 1423739792 [2015-02-12 12:16:32], Next reset 0 [2015-02-12 12:00:00]
rlm_sqlcounter: Current Time: 1423739792 [2015-02-12 12:16:32], Prev reset 0 [2015-02-12 12:00:00]
Module: Instantiating module "chillispot_max_bytes_out" from file /etc/freeradius/sql/mysql/counter.conf
sqlcounter chillispot_max_bytes_out {
counter-name = "ChilliSpot-Max-Output-Octets"
check-name = "ChilliSpot-Max-Output-Octets"
reply-name = "ChilliSpot-Max-Output-Octets"
key = "User-Name"
sqlmod-inst = "sql"
query = "SELECT SUM(acctoutputoctets) FROM radacct WHERE username='%{%k}'"
reset = "never"
safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
rlm_sqlcounter: Check attribute ChilliSpot-Max-Output-Octets is number 954138626
rlm_sqlcounter: Current Time: 1423739792 [2015-02-12 12:16:32], Next reset 0 [2015-02-12 12:00:00]
rlm_sqlcounter: Current Time: 1423739792 [2015-02-12 12:16:32], Prev reset 0 [2015-02-12 12:00:00]
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating module "acct_unique" from file /etc/freeradius/modules/acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, NAS-Identifier, NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating module "detail" from file /etc/freeradius/modules/detail
detail {
detailfile = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Linked to module rlm_unix
Module: Instantiating module "unix" from file /etc/freeradius/modules/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Module: Linked to module rlm_attr_filter
Module: Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/modules/attr_filter
attr_filter attr_filter.accounting_response {
attrsfile = "/etc/freeradius/attrs.accounting_response"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/freeradius/attrs.accounting_response
Module: Checking session {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter
attr_filter attr_filter.access_reject {
attrsfile = "/etc/freeradius/attrs.access_reject"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/freeradius/attrs.access_reject
} # modules
} # server
server status { # from file /etc/freeradius/sites-enabled/status
modules {
Module: Creating Autz-Type = Status-Server
Module: Checking authorize {...} for more modules to load
Module: Instantiating module "ok" from file /etc/freeradius/modules/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
} # modules
} # server
server dynamic_client_server { # from file /etc/freeradius/sites-enabled/inav-dynclients
modules {
Module: Checking authorize {...} for more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
listen {
type = "control"
listen {
socket = "/var/run/freeradius/freeradius.sock"
}
}
listen {
type = "status"
ipaddr = 127.0.0.1
port = 18120
client admin {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "mysecret"
}
}
... adding new socket proxy address * port 51107
... adding new socket proxy address * port 35460
... adding new socket proxy address * port 39125
... adding new socket proxy address * port 33472
... adding new socket proxy address * port 35308
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /var/run/freeradius/freeradius.sock
Listening on status address 127.0.0.1 port 18120 as server status
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1 port 56272, id=248, length=65
User-Name = "MAXSPDGROUP"
User-Password = "MAXSPDGROUP"
NAS-Identifier = "yop101"
NAS-IP-Address = 10.12.22.159
# Executing section authorize from file /etc/freeradius/sites-enabled/default
+group authorize {
++[preprocess] = ok
++update request {
sql_xlat
expand: %{Stripped-User-Name} ->
... expanding second conditional
expand: %{User-Name} -> MAXSPDGROUP
expand: %{%{User-Name}:-DEFAULT} -> MAXSPDGROUP
expand: %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} -> MAXSPDGROUP
sql_set_user escaped user --> 'MAXSPDGROUP'
expand: SELECT groupname FROM radhuntgroup WHERE nasipaddress='%{NAS-IP-Address}' -> SELECT groupname FROM radhuntgroup WHERE nasipaddress='10.12.22.159'
rlm_sql (sql): Reserving sql socket id: 24
sql_xlat finished
rlm_sql (sql): Released sql socket id: 24
expand: %{sql:SELECT groupname FROM radhuntgroup WHERE nasipaddress='%{NAS-IP-Address}'} -> yop101
++} # update request = noop
++? if ("%{sql:UPDATE radacct SET AcctStopTime=ADDDATE(AcctStartTime,INTERVAL AcctSessionTime SECOND), AcctTerminateCause='Clear-Stale-Session' WHERE UserName='%{User-Name}' AND CallingStationId='%{Calling-Station-Id}' AND AcctStopTime is null}")
sql_xlat
expand: %{Stripped-User-Name} ->
... expanding second conditional
expand: %{User-Name} -> MAXSPDGROUP
expand: %{%{User-Name}:-DEFAULT} -> MAXSPDGROUP
expand: %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} -> MAXSPDGROUP
sql_set_user escaped user --> 'MAXSPDGROUP'
expand: UPDATE radacct SET AcctStopTime=ADDDATE(AcctStartTime,INTERVAL AcctSessionTime SECOND), AcctTerminateCause='Clear-Stale-Session' WHERE UserName='%{User-Name}' AND CallingStationId='%{Calling-Station-Id}' AND AcctStopTime is null -> UPDATE radacct SET AcctStopTime=ADDDATE(AcctStartTime,INTERVAL AcctSessionTime SECOND), AcctTerminateCause='Clear-Stale-Session' WHERE UserName='MAXSPDGROUP' AND CallingStationId='' AND AcctStopTime is null
rlm_sql (sql): Reserving sql socket id: 23
rlm_sql (sql): SQL query affected no rows
rlm_sql (sql): Released sql socket id: 23
expand: %{sql:UPDATE radacct SET AcctStopTime=ADDDATE(AcctStartTime,INTERVAL AcctSessionTime SECOND), AcctTerminateCause='Clear-Stale-Session' WHERE UserName='%{User-Name}' AND CallingStationId='%{Calling-Station-Id}' AND AcctStopTime is null} -> 0
? Evaluating ("%{sql:UPDATE radacct SET AcctStopTime=ADDDATE(AcctStartTime,INTERVAL AcctSessionTime SECOND), AcctTerminateCause='Clear-Stale-Session' WHERE UserName='%{User-Name}' AND CallingStationId='%{Calling-Station-Id}' AND AcctStopTime is null}") -> FALSE
++? if ("%{sql:UPDATE radacct SET AcctStopTime=ADDDATE(AcctStartTime,INTERVAL AcctSessionTime SECOND), AcctTerminateCause='Clear-Stale-Session' WHERE UserName='%{User-Name}' AND CallingStationId='%{Calling-Station-Id}' AND AcctStopTime is null}") -> FALSE
++[chap] = noop
++[mschap] = noop
[suffix] No '@' in User-Name = "MAXSPDGROUP", looking up realm NULL
[suffix] Found realm "NULL"
[suffix] Adding Stripped-User-Name = "MAXSPDGROUP"
[suffix] Adding Realm = "NULL"
[suffix] Authentication realm is LOCAL.
++[suffix] = ok
++[files] = noop
[sql] expand: %{Stripped-User-Name} -> MAXSPDGROUP
[sql] expand: %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} -> MAXSPDGROUP
[sql] sql_set_user escaped user --> 'MAXSPDGROUP'
rlm_sql (sql): Reserving sql socket id: 22
[sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'MAXSPDGROUP' ORDER BY id
[sql] User found in radcheck table
[sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'MAXSPDGROUP' ORDER BY id
[sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'MAXSPDGROUP' ORDER BY priority
[sql] expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' OR groupname = '%{HuntGroup-Name}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'c_yop1' OR groupname = 'yop101' ORDER BY id
[sql] expand: %{NAS-Identifier} -> yop101
[sql] expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' OR groupname = '%{HuntGroup-Name}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'noaccess' OR groupname = 'yop101' ORDER BY id
rlm_sql (sql): Released sql socket id: 22
++[sql] = ok
++? if (notfound)
? Evaluating (notfound) -> FALSE
++? if (notfound) -> FALSE
++? if (reject)
? Evaluating (reject) -> FALSE
++? if (reject) -> FALSE
++[expiration] = noop
rlm_counter: Entering module authorize code
rlm_counter: Could not find Check item value pair
++[daily] = noop
++[logintime] = noop
[pap] Normalizing MD5-Password from hex encoding
++[pap] = updated
rlm_sqlcounter: Entering module authorize code
rlm_sqlcounter: Could not find Check item value pair
++[noresetcounter] = noop
++? if (reject)
? Evaluating (reject) -> FALSE
++? if (reject) -> FALSE
rlm_sqlcounter: Entering module authorize code
rlm_sqlcounter: Could not find Check item value pair
++[dailycounter] = noop
++? if (reject)
? Evaluating (reject) -> FALSE
++? if (reject) -> FALSE
rlm_sqlcounter: Entering module authorize code
rlm_sqlcounter: Could not find Check item value pair
++[dailycounterlocation] = noop
++? if (reject)
? Evaluating (reject) -> FALSE
++? if (reject) -> FALSE
rlm_sqlcounter: Entering module authorize code
rlm_sqlcounter: Could not find Check item value pair
++[monthlycounter] = noop
++? if (reject)
? Evaluating (reject) -> FALSE
++? if (reject) -> FALSE
rlm_sqlcounter: Entering module authorize code
rlm_sqlcounter: Could not find Check item value pair
++[counterChilliSpotMaxTotalOctets] = noop
++? if (reject)
? Evaluating (reject) -> FALSE
++? if (reject) -> FALSE
rlm_sqlcounter: Entering module authorize code
rlm_sqlcounter: Could not find Check item value pair
++[counterChilliSpotMaxTotalOctetsDaily] = noop
++? if (reject)
? Evaluating (reject) -> FALSE
++? if (reject) -> FALSE
rlm_sqlcounter: Entering module authorize code
rlm_sqlcounter: Could not find Check item value pair
++[counterChilliSpotMaxTotalOctetsWeekly] = noop
++? if (reject)
? Evaluating (reject) -> FALSE
++? if (reject) -> FALSE
rlm_sqlcounter: Entering module authorize code
rlm_sqlcounter: Could not find Check item value pair
++[counterChilliSpotMaxTotalOctetsMonthly] = noop
++? if (reject)
? Evaluating (reject) -> FALSE
++? if (reject) -> FALSE
rlm_sqlcounter: Entering module authorize code
rlm_sqlcounter: Could not find Check item value pair
++[chillispot_max_bytes_in] = noop
++? if (reject)
? Evaluating (reject) -> FALSE
++? if (reject) -> FALSE
rlm_sqlcounter: Entering module authorize code
rlm_sqlcounter: Could not find Check item value pair
++[chillispot_max_bytes_out] = noop
++? if (reject)
? Evaluating (reject) -> FALSE
++? if (reject) -> FALSE
+} # group authorize = updated
Found Auth-Type = PAP
# Executing group from file /etc/freeradius/sites-enabled/default
+group PAP {
[pap] login attempt with password "MAXSPDGROUP"
[pap] Using MD5 encryption.
[pap] User authenticated successfully
++[pap] = ok
+} # group PAP = ok
# Executing section post-auth from file /etc/freeradius/sites-enabled/default
+group post-auth {
[sql] expand: %{Stripped-User-Name} -> MAXSPDGROUP
[sql] expand: %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} -> MAXSPDGROUP
[sql] sql_set_user escaped user --> 'MAXSPDGROUP'
[sql] expand: %{User-Password} -> MAXSPDGROUP
[sql] expand: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') -> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'MAXSPDGROUP', 'MAXSPDGROUP', 'Access-Accept', '2015-02-12 12:16:40')
rlm_sql (sql) in sql_postauth: query is INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'MAXSPDGROUP', 'MAXSPDGROUP', 'Access-Accept', '2015-02-12 12:16:40')
rlm_sql (sql): Reserving sql socket id: 21
rlm_sql (sql): Released sql socket id: 21
++[sql] = ok
++[exec] = noop
+} # group post-auth = ok
Sending Access-Accept of id 248 to 127.0.0.1 port 56272
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
Cleaning up request 0 ID 248 with timestamp +8
Ready to process requests.
[1] http://wiki.freeradius.org/modules/Rlm_sql#SQL-Schema-and-usage
--
Lorenzo Milesi - lorenzo.milesi at yetopen.it
YetOpen S.r.l. - http://www.yetopen.it/
More information about the Freeradius-Users
mailing list