MySQL group authentication problem (v3.0.8)

[ankita therese]

Hi,

      I'm having trouble getting FreeRADIUS to recognize the group of
a user using sql. I'm running version 3.0.8, and as far as I can tell,
everything runs smoothly up to the authorize_group_check_query. It
executes, but after this, on debugging with radiusd -XX,
authentication breaks off with

Debug: (0) sql: ... falling-through to profile processing
Debug: rlm_sql (sql): Released connection (4)

The output of radiusd -X is as follows. Group attribute values are not
verified or added to reply.
I tried increasing minimum no of sql connections, but that just makes
radius tell me i have too many idle connections and need to reduce min.

(0) Received Access-Request Id 153 from 127.0.0.1:49747 to
127.0.1.1:1812 length 85
(0)   User-Name = 'mynewuser'
(0)   User-Password = 'password'
(0)   NAS-IP-Address = 127.0.1.1
(0)   NAS-Port = 0
(0)   Message-Authenticator = 0x32010b83ba8a72dd523a231e353d1a1b
(0)   Framed-Protocol = PPP
(0) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (!&User-Name) {
(0)       if (!&User-Name)  -> FALSE
(0)       if (&User-Name =~ / /) {
(0)       if (&User-Name =~ / /)  -> FALSE
(0)       if (&User-Name =~ /@.*@/ ) {
(0)       if (&User-Name =~ /@.*@/ )  -> FALSE
(0)       if (&User-Name =~ /\.\./ ) {
(0)       if (&User-Name =~ /\.\./ )  -> FALSE
(0)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(0)       if (&User-Name =~ /\.$/)  {
(0)       if (&User-Name =~ /\.$/)   -> FALSE
(0)       if (&User-Name =~ /@\./)  {
(0)       if (&User-Name =~ /@\./)   -> FALSE
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "mynewuser", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: No EAP-Message, not doing EAP
(0)     [eap] = noop
(0) files: users: Matched entry DEFAULT at line 182
(0)     [files] = ok
(0) sql: EXPAND %{User-Name}
(0) sql:    --> mynewuser
(0) sql: SQL-User-Name set to 'mynewuser'
rlm_sql (sql): Reserved connection (4)
(0) sql: EXPAND SELECT id, username, attribute, value, op FROM
radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
(0) sql:    --> SELECT id, username, attribute, value, op FROM
radcheck WHERE username = 'mynewuser' ORDER BY id
(0) sql: Executing select query: SELECT id, username, attribute,
value, op FROM radcheck WHERE username = 'mynewuser' ORDER BY id
(0) sql: User found in radcheck table
(0) sql: Conditional check items matched, merging assignment check items
(0) sql:   Cleartext-Password := 'password'
(0) sql: EXPAND SELECT id, username, attribute, value, op FROM
radreply WHERE username = '%{SQL-User-Name}' ORDER BY id
(0) sql:    --> SELECT id, username, attribute, value, op FROM
radreply WHERE username = 'mynewuser' ORDER BY id
(0) sql: Executing select query: SELECT id, username, attribute,
value, op FROM radreply WHERE username = 'mynewuser' ORDER BY id
(0) sql: User found in radreply table, merging reply items
(0) sql:   Reply-Message = 'OK'
(0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
'%{SQL-User-Name}' ORDER BY priority
(0) sql:    --> SELECT groupname FROM radusergroup WHERE username =
'mynewuser' ORDER BY priority
(0) sql: Executing select query: SELECT groupname FROM radusergroup
WHERE username = 'mynewuser' ORDER BY priority
(0) sql: User found in the group table
(0) sql: EXPAND SELECT id, groupname, attribute, Value, op FROM
radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id
(0) sql:    --> SELECT id, groupname, attribute, Value, op FROM
radgroupcheck WHERE groupname = 'student' ORDER BY id
(0) sql: Executing select query: SELECT id, groupname, attribute,
Value, op FROM radgroupcheck WHERE groupname = 'student' ORDER BY id
rlm_sql (sql): Released connection (4)
(0)     [sql] = ok
(0)     [expiration] = noop
(0)     [logintime] = noop
(0)     [pap] = updated
(0)   } # authorize = updated
(0) Found Auth-Type = PAP
(0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(0)   Auth-Type PAP {
(0) pap: Login attempt with password
(0) pap: User authenticated successfully
(0)     [pap] = ok
(0)   } # Auth-Type PAP = ok
(0) # Executing section post-auth from file
/usr/local/etc/raddb/sites-enabled/default
(0)   post-auth {
(0)     update {
(0)       No attributes updated
(0)     } # update = noop
(0) sql: EXPAND .query
(0) sql:    --> .query
(0) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (4)
(0) sql: EXPAND %{User-Name}
(0) sql:    --> mynewuser
(0) sql: SQL-User-Name set to 'mynewuser'
(0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply,
authdate) VALUES ( '%{SQL-User-Name}',
'%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')
(0) sql:    --> INSERT INTO radpostauth (username, pass, reply,
authdate) VALUES ( 'mynewuser', 'password', 'Access-Accept',
'2015-07-12 20:57:34')
(0) sql: Executing query: INSERT INTO radpostauth (username, pass,
reply, authdate) VALUES ( 'mynewuser', 'password', 'Access-Accept',
'2015-07-12 20:57:34')
(0) sql: SQL query returned: success
(0) sql: 1 record(s) updated
rlm_sql (sql): Released connection (4)
(0)     [sql] = ok
(0)     [exec] = noop
(0)     policy remove_reply_message_if_eap {
(0)       if (&reply:EAP-Message && &reply:Reply-Message) {
(0)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(0)       else {
(0)         [noop] = noop
(0)       } # else = noop
(0)     } # policy remove_reply_message_if_eap = noop
(0)   } # post-auth = ok
(0) Sent Access-Accept Id 153 from 127.0.1.1:1812 to 127.0.0.1:49747 length
0
(0)   Framed-Protocol = PPP
(0)   Framed-Compression = Van-Jacobson-TCP-IP
(0)   Reply-Message = 'OK'
(0) Finished request



Thank you