freeradius 2.1.12 - EAP Trouble - files is used with LEAP, not PEAP, and AD/mschap is used with PEAP, not LEAP
freerad
list.radius at tiri.li
Sun Jul 26 18:54:01 CEST 2015
2015-07-26 16:28 GMT+02:00 Matthew Newton <mcn4 at leicester.ac.uk>:
> testuser Cleartext-Password := "password", MS-CHAP-Use-NTLM-Auth := No
Cool. this did the trick :)
But for LEAP I still get the reject for the AD User:
./rad_eap_test -H 10.160.4.50 -P 1812 -S testing123 -u wlan_test -p test -m
IEEE8021X -e LEAP -2 MSCHAPV2 -i tiritest -v
access-reject; 1
Radius Debug tells:
[eap] processing type leap
rlm_eap_leap: No Cleartext-Password or NT-Password configured for this user
[eap] Handler failed in EAP/leap
Full Log attached (log07.txt)
Best regards,
Thomas.
-------------- next part --------------
FreeRADIUS Version 2.1.12, for host x86_64-pc-linux-gnu, built on Feb 24 2014 at 14:57:57
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/modules/
including configuration file /etc/freeradius/modules/smsotp
including configuration file /etc/freeradius/modules/replicate
including configuration file /etc/freeradius/modules/radutmp
including configuration file /etc/freeradius/modules/attr_filter
including configuration file /etc/freeradius/modules/echo
including configuration file /etc/freeradius/modules/mschap
including configuration file /etc/freeradius/modules/soh
including configuration file /etc/freeradius/modules/detail
including configuration file /etc/freeradius/modules/checkval
including configuration file /etc/freeradius/modules/ldap
including configuration file /etc/freeradius/modules/cui
including configuration file /etc/freeradius/modules/always
including configuration file /etc/freeradius/modules/etc_group
including configuration file /etc/freeradius/modules/expiration
including configuration file /etc/freeradius/modules/realm
including configuration file /etc/freeradius/modules/perl
including configuration file /etc/freeradius/modules/expr
including configuration file /etc/freeradius/modules/sql_log
including configuration file /etc/freeradius/modules/sradutmp
including configuration file /etc/freeradius/modules/ippool
including configuration file /etc/freeradius/modules/inner-eap
including configuration file /etc/freeradius/modules/krb5
including configuration file /etc/freeradius/modules/smbpasswd
including configuration file /etc/freeradius/modules/pap
including configuration file /etc/freeradius/modules/counter
including configuration file /etc/freeradius/modules/wimax
including configuration file /etc/freeradius/modules/detail.example.com
including configuration file /etc/freeradius/modules/files
including configuration file /etc/freeradius/modules/redis
including configuration file /etc/freeradius/modules/acct_unique
including configuration file /etc/freeradius/modules/digest
including configuration file /etc/freeradius/modules/passwd
including configuration file /etc/freeradius/modules/exec
including configuration file /etc/freeradius/modules/linelog
including configuration file /etc/freeradius/modules/logintime
including configuration file /etc/freeradius/modules/detail.log
including configuration file /etc/freeradius/modules/rediswho
including configuration file /etc/freeradius/modules/dynamic_clients
including configuration file /etc/freeradius/modules/mac2vlan
including configuration file /etc/freeradius/modules/mac2ip
including configuration file /etc/freeradius/modules/ntlm_auth
including configuration file /etc/freeradius/modules/chap
including configuration file /etc/freeradius/modules/policy
including configuration file /etc/freeradius/modules/otp
including configuration file /etc/freeradius/modules/attr_rewrite
including configuration file /etc/freeradius/modules/opendirectory
including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login
including configuration file /etc/freeradius/modules/preprocess
including configuration file /etc/freeradius/modules/pam
including configuration file /etc/freeradius/modules/unix
including configuration file /etc/freeradius/eap.conf
including configuration file /etc/freeradius/policy.conf
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/default
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
main {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
including dictionary file /etc/freeradius/dictionary
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
require_message_authenticator = yes
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "WLAN4zyxel"
nastype = "other"
}
client 10.160.199.11 {
require_message_authenticator = no
secret = "WLAN4zyxel"
}
client 10.160.4.5 {
require_message_authenticator = no
secret = "testing123"
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating module "exec" from file /etc/freeradius/modules/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating module "expr" from file /etc/freeradius/modules/expr
Module: Linked to module rlm_expiration
Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
modules {
Module: Creating Auth-Type = Perl
Module: Creating Auth-Type = digest
Module: Creating Post-Auth-Type = Perl
Module: Creating Post-Auth-Type = REJECT
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_perl
Module: Instantiating module "perl" from file /etc/freeradius/modules/perl
perl {
module = "/etc/freeradius/tiri_rlm_perl.pl"
func_authorize = "authorize"
func_authenticate = "authenticate"
func_accounting = "accounting"
func_preacct = "preacct"
func_checksimul = "checksimul"
func_detach = "detach"
func_xlat = "xlat"
func_pre_proxy = "pre_proxy"
func_post_proxy = "post_proxy"
func_post_auth = "post_auth"
func_recv_coa = "recv_coa"
func_send_coa = "send_coa"
}
Module: Linked to module rlm_pap
Module: Instantiating module "pap" from file /etc/freeradius/modules/pap
pap {
encryption_scheme = "auto"
auto_header = yes
}
Module: Linked to module rlm_chap
Module: Instantiating module "chap" from file /etc/freeradius/modules/chap
Module: Linked to module rlm_mschap
Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{%{Stripped-User-Name}:-%{User-Name:-None}} --domain=%{%{mschap:NT-Domain}:-SWBT} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}"
allow_retry = yes
}
Module: Linked to module rlm_digest
Module: Instantiating module "digest" from file /etc/freeradius/modules/digest
Module: Linked to module rlm_unix
Module: Instantiating module "unix" from file /etc/freeradius/modules/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating module "eap" from file /etc/freeradius/eap.conf
eap {
default_eap_type = "peap"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 4096
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
CA_path = "/etc/freeradius/certs"
pem_file_type = yes
private_key_file = "/etc/freeradius/certs/server.key"
certificate_file = "/etc/freeradius/certs/server.pem"
CA_file = "/etc/freeradius/certs/ca.pem"
private_key_password = "WLAN4hotspot"
dh_file = "/etc/freeradius/certs/dh"
random_file = "/dev/urandom"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/etc/freeradius/certs/bootstrap"
ecdh_curve = "prime256v1"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
tmpdir = "/tmp/freeradius"
client = "/usr/bin/openssl verify -CAfile /etc/freeradius/certs/ca.pem -CApath /etc/freeradius/certs %{TLS-Client-Cert-Filename}"
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = yes
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = yes
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess
preprocess {
huntgroups = "/etc/freeradius/huntgroups"
hints = "/etc/freeradius/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Linked to module rlm_detail
Module: Instantiating module "auth_log" from file /etc/freeradius/modules/detail.log
detail auth_log {
detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Linked to module rlm_realm
Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating module "files" from file /etc/freeradius/modules/files
files {
usersfile = "/etc/freeradius/users"
acctusersfile = "/etc/freeradius/acct_users"
preproxy_usersfile = "/etc/freeradius/preproxy_users"
compat = "no"
}
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating module "acct_unique" from file /etc/freeradius/modules/acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Instantiating module "detail" from file /etc/freeradius/modules/detail
detail {
detailfile = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Linked to module rlm_radutmp
Module: Instantiating module "radutmp" from file /etc/freeradius/modules/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Linked to module rlm_attr_filter
Module: Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/modules/attr_filter
attr_filter attr_filter.accounting_response {
attrsfile = "/etc/freeradius/attrs.accounting_response"
key = "%{User-Name}"
relaxed = no
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter
attr_filter attr_filter.access_reject {
attrsfile = "/etc/freeradius/attrs.access_reject"
key = "%{User-Name}"
relaxed = no
}
} # modules
} # server
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
modules {
Module: Creating Post-Proxy-Type = Fail
Module: Checking authenticate {...} for more modules to load
Module: Checking authorize {...} for more modules to load
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
... adding new socket proxy address * port 49943
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 10.160.4.5 port 63151, id=0, length=112
User-Name = "wlan_test"
NAS-IP-Address = 127.0.0.1
Calling-Station-Id = "70-6F-6C-69-73-68"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Connect-Info = "tiritest"
EAP-Message = 0x0200000e01776c616e5f74657374
Message-Authenticator = 0x879b2274fb1162a0a8b3978e3b0f7cbe
# Executing section authorize from file /etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/10.160.4.5/auth-detail-20150726
[auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/10.160.4.5/auth-detail-20150726
[auth_log] expand: %t -> Sun Jul 26 18:50:00 2015
++[auth_log] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "wlan_test", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 0 length 14
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
rlm_perl: RAD_REQUEST: Message-Authenticator = 0x879b2274fb1162a0a8b3978e3b0f7cbe
rlm_perl: RAD_REQUEST: EAP-Type = Identity
rlm_perl: RAD_REQUEST: NAS-Port-Type = Wireless-802.11
rlm_perl: RAD_REQUEST: Calling-Station-Id = 70-6F-6C-69-73-68
rlm_perl: RAD_REQUEST: Framed-MTU = 1400
rlm_perl: RAD_REQUEST: EAP-Message = 0x0200000e01776c616e5f74657374
rlm_perl: RAD_REQUEST: User-Name = wlan_test
rlm_perl: RAD_REQUEST: Connect-Info = tiritest
rlm_perl: RAD_REQUEST: NAS-IP-Address = 127.0.0.1
rlm_perl: Added pair Message-Authenticator = 0x879b2274fb1162a0a8b3978e3b0f7cbe
rlm_perl: Added pair EAP-Type = Identity
rlm_perl: Added pair NAS-Port-Type = Wireless-802.11
rlm_perl: Added pair Calling-Station-Id = 70-6F-6C-69-73-68
rlm_perl: Added pair Framed-MTU = 1400
rlm_perl: Added pair EAP-Message = 0x0200000e01776c616e5f74657374
rlm_perl: Added pair User-Name = wlan_test
rlm_perl: Added pair Connect-Info = tiritest
rlm_perl: Added pair NAS-IP-Address = 127.0.0.1
rlm_perl: Added pair Reply-Message = rlm_perl authorize function
rlm_perl: Added pair Auth-Type = EAP
++[perl] returns ok
++? if (!EAP-Message)
? Evaluating !(EAP-Message) -> FALSE
++? if (!EAP-Message) -> FALSE
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user. Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 0 to 10.160.4.5 port 63151
Reply-Message = "rlm_perl authorize function"
EAP-Message = 0x010100061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x2e11d34c2e10caabd42d903d316cdf4d
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.160.4.5 port 63151, id=1, length=122
User-Name = "wlan_test"
NAS-IP-Address = 127.0.0.1
Calling-Station-Id = "70-6F-6C-69-73-68"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Connect-Info = "tiritest"
EAP-Message = 0x020100060311
State = 0x2e11d34c2e10caabd42d903d316cdf4d
Message-Authenticator = 0x9dafd86bbfbda18c633aa7bca0e53263
# Executing section authorize from file /etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/10.160.4.5/auth-detail-20150726
[auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/10.160.4.5/auth-detail-20150726
[auth_log] expand: %t -> Sun Jul 26 18:50:00 2015
++[auth_log] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "wlan_test", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
rlm_perl: RAD_REQUEST: Message-Authenticator = 0x9dafd86bbfbda18c633aa7bca0e53263
rlm_perl: RAD_REQUEST: EAP-Type = NAK
rlm_perl: RAD_REQUEST: NAS-Port-Type = Wireless-802.11
rlm_perl: RAD_REQUEST: Calling-Station-Id = 70-6F-6C-69-73-68
rlm_perl: RAD_REQUEST: Framed-MTU = 1400
rlm_perl: RAD_REQUEST: EAP-Message = 0x020100060311
rlm_perl: RAD_REQUEST: User-Name = wlan_test
rlm_perl: RAD_REQUEST: Connect-Info = tiritest
rlm_perl: RAD_REQUEST: State = 0x2e11d34c2e10caabd42d903d316cdf4d
rlm_perl: RAD_REQUEST: NAS-IP-Address = 127.0.0.1
rlm_perl: Added pair Message-Authenticator = 0x9dafd86bbfbda18c633aa7bca0e53263
rlm_perl: Added pair EAP-Type = NAK
rlm_perl: Added pair NAS-Port-Type = Wireless-802.11
rlm_perl: Added pair Calling-Station-Id = 70-6F-6C-69-73-68
rlm_perl: Added pair Framed-MTU = 1400
rlm_perl: Added pair EAP-Message = 0x020100060311
rlm_perl: Added pair User-Name = wlan_test
rlm_perl: Added pair Connect-Info = tiritest
rlm_perl: Added pair State = 0x2e11d34c2e10caabd42d903d316cdf4d
rlm_perl: Added pair NAS-IP-Address = 127.0.0.1
rlm_perl: Added pair Reply-Message = rlm_perl authorize function
rlm_perl: Added pair Auth-Type = EAP
++[perl] returns ok
++? if (!EAP-Message)
? Evaluating !(EAP-Message) -> FALSE
++? if (!EAP-Message) -> FALSE
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user. Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP NAK
[eap] EAP-NAK asked for EAP-Type/leap
[eap] processing type leap
rlm_eap_leap: Stage 2
rlm_eap_leap: Issuing AP Challenge
rlm_eap_leap: Successfully initiated
++[eap] returns handled
Sending Access-Challenge of id 1 to 10.160.4.5 port 63151
Reply-Message = "rlm_perl authorize function"
EAP-Message = 0x01020019110100084c4cdda5e40d49df776c616e5f74657374
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x2e11d34c2f13c2abd42d903d316cdf4d
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.160.4.5 port 63151, id=2, length=157
User-Name = "wlan_test"
NAS-IP-Address = 127.0.0.1
Calling-Station-Id = "70-6F-6C-69-73-68"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Connect-Info = "tiritest"
EAP-Message = 0x020200291101001818b485d6b386ec6eeb438d68e347b7ca1359946ca8c2ec29776c616e5f74657374
State = 0x2e11d34c2f13c2abd42d903d316cdf4d
Message-Authenticator = 0x7fd390d3ad3664b957d6440d2d0819a1
# Executing section authorize from file /etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/10.160.4.5/auth-detail-20150726
[auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/10.160.4.5/auth-detail-20150726
[auth_log] expand: %t -> Sun Jul 26 18:50:00 2015
++[auth_log] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "wlan_test", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 41
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
rlm_perl: RAD_REQUEST: Message-Authenticator = 0x7fd390d3ad3664b957d6440d2d0819a1
rlm_perl: RAD_REQUEST: EAP-Type = Cisco-LEAP
rlm_perl: RAD_REQUEST: NAS-Port-Type = Wireless-802.11
rlm_perl: RAD_REQUEST: Calling-Station-Id = 70-6F-6C-69-73-68
rlm_perl: RAD_REQUEST: Framed-MTU = 1400
rlm_perl: RAD_REQUEST: EAP-Message = 0x020200291101001818b485d6b386ec6eeb438d68e347b7ca1359946ca8c2ec29776c616e5f74657374
rlm_perl: RAD_REQUEST: User-Name = wlan_test
rlm_perl: RAD_REQUEST: Connect-Info = tiritest
rlm_perl: RAD_REQUEST: State = 0x2e11d34c2f13c2abd42d903d316cdf4d
rlm_perl: RAD_REQUEST: NAS-IP-Address = 127.0.0.1
rlm_perl: Added pair Message-Authenticator = 0x7fd390d3ad3664b957d6440d2d0819a1
rlm_perl: Added pair EAP-Type = Cisco-LEAP
rlm_perl: Added pair NAS-Port-Type = Wireless-802.11
rlm_perl: Added pair Calling-Station-Id = 70-6F-6C-69-73-68
rlm_perl: Added pair Framed-MTU = 1400
rlm_perl: Added pair EAP-Message = 0x020200291101001818b485d6b386ec6eeb438d68e347b7ca1359946ca8c2ec29776c616e5f74657374
rlm_perl: Added pair User-Name = wlan_test
rlm_perl: Added pair Connect-Info = tiritest
rlm_perl: Added pair State = 0x2e11d34c2f13c2abd42d903d316cdf4d
rlm_perl: Added pair NAS-IP-Address = 127.0.0.1
rlm_perl: Added pair Reply-Message = rlm_perl authorize function
rlm_perl: Added pair Auth-Type = EAP
++[perl] returns ok
++? if (!EAP-Message)
? Evaluating !(EAP-Message) -> FALSE
++? if (!EAP-Message) -> FALSE
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user. Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/leap
[eap] processing type leap
rlm_eap_leap: No Cleartext-Password or NT-Password configured for this user
[eap] Handler failed in EAP/leap
[eap] Failed in EAP select
++[eap] returns invalid
Failed to authenticate the user.
Using Post-Auth-Type Reject
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group REJECT {...}
[attr_filter.access_reject] expand: %{User-Name} -> wlan_test
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 2 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 2
Sending Access-Reject of id 2 to 10.160.4.5 port 63151
Reply-Message = "rlm_perl authorize function"
EAP-Message = 0x04020004
Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.9 seconds.
Cleaning up request 0 ID 0 with timestamp +10
Cleaning up request 1 ID 1 with timestamp +10
Waking up in 0.9 seconds.
Cleaning up request 2 ID 2 with timestamp +10
Ready to process requests.
More information about the Freeradius-Users
mailing list