how do I define in my dictionary the vendor of format Extended-Vendor-Specific-1

Jorge Pereira jpereiran at gmail.com
Fri Jun 12 16:19:43 CEST 2015


Hi,

The device is "Alcatel 7210 SAS"? if yes, I have the complete dictionary
for this equipment. Wait till end of day that i will provide.

--
Jorge Pereira

On Fri, Jun 12, 2015 at 11:12 AM, Vereecke, Katrien (Katrien) <
katrien.vereecke at alcatel-lucent.com> wrote:

> Hello,
>
> I am using version freeradius-server-3.0.8, it's only from version 3.x
> that that the rfc6929 is supported.
>
> Kind regards,
> Katrien.
>
> -----Original Message-----
> From: Freeradius-Users [mailto:freeradius-users-bounces+katrien.vereecke=
> alcatel-lucent.com at lists.freeradius.org] On Behalf Of Jorge Pereira
> Sent: Friday, June 12, 2015 16:10
> To: FreeRadius users mailing list
> Subject: Re: how do I define in my dictionary the vendor of format
> Extended-Vendor-Specific-1
>
> What the version of your Radius?
>
> --
> Jorge Pereira
>
> On Fri, Jun 12, 2015 at 10:57 AM, Vereecke, Katrien (Katrien) <
> katrien.vereecke at alcatel-lucent.com> wrote:
>
> > Hello,
> >
> > What you explain is for a normal format vendorID, the problem is that
> > I want my vendor ID according to the rfc6929, in dotted format :
> 241.26.6527
> > VENDOR          Alcatel-IPD-Ext-1        241.26.6527   (=> 241.26 is as
> > defined in dictionary.rfc6929 and 6527 is my vendorID.)
> > BEGIN-VENDOR    Alcatel-IPD-Ext-1
> >    ATTRIBUTE   Alc-Ext-TestAttr-1  1  integer
> > END-VENDOR      Alcatel-IPD-Ext-1
> >
> > This is not working, if I specify it like this, my radius packet are
> > not in the correct format according rfc6929, it's still the old way of
> > VSA's like RFC 2865.
> > How do I indicate in my dictionary that the vendor must be in the
> > format Extended-Vendor-Specific-1?
> >
> > Kind regards,
> > Katrien.
> > -----Original Message-----
> > From: Freeradius-Users
> > [mailto:freeradius-users-bounces+katrien.vereecke=
> > alcatel-lucent.com at lists.freeradius.org] On Behalf Of Jorge Pereira
> > Sent: Friday, June 12, 2015 15:43
> > To: FreeRadius users mailing list
> > Subject: Re: how do I define in my dictionary the vendor of format
> > Extended-Vendor-Specific-1
> >
> > Hi,
> >
> >    trust me, is more easy that you can imagine... my sugestion is:
> >
> > # cd  /etc/freeradius
> >
> > the below dictionary.. is a smal/simple example to be based.
> >
> > # cp  /usr/share/dictionary.zyxel   dictionary.blable
> >
> > Open the file dictionary.blable and change the number of VENDOR for
> > your preference. and change/add/remove the attributes that you need....
> save.
> >
> > # echo '$INCLUDE dictionary.blable'  >> dictionary
> >
> > done... now you can use your custom dictionary... remember that you
> > need to have the same dicionary in the other side that will
> > send/receive the requests.
> >
> > --
> > Jorge Pereira
> >
> > On Fri, Jun 12, 2015 at 7:24 AM, Vereecke, Katrien (Katrien) <
> > katrien.vereecke at alcatel-lucent.com> wrote:
> >
> > > Hello,
> > >
> > > I am using freeradius-server-3.0.8.
> > >
> > > I am trying to use the extended-vendor-sepcific-1 attribute as
> > > specified in RC6929.
> > >
> > > How can I indicate in my dictionary that the vendor must be
> > > according to the extended-vendor-specific format?
> > >
> > > I added the following in a new dictionary file:
> > > VENDOR          Alcatel-IPD-Ext-1               241.26.6527
> > >
> > > BEGIN-VENDOR    Alcatel-IPD-Ext-1
> > > ATTRIBUTE   Alc-Ext-TestAttr-1  1  integer
> > > END-VENDOR      Alcatel-IPD-Ext-1
> > >
> > > This gives no problems when starting the radius server, but the
> > > attribute is not sent in the extended-vendor-specific format but
> > > still in the old way VSA.
> > >
> > > I found in the http://freeradius.org/radiusd/man/dictionary.txt that :
> > >
> > >  "You  can  also  use  "format=Extended-Vendor-Specific-1",  through
> > >    "format=Extended-Vendor-Specific-6".   These  define  VSAs   in the
> > >    "extended vendor-specific" space"
> > >
> > > but this gives errors :
> > > Errors reading dictionary: dict_init:
> > > /usr/local/share/freeradius/dictionary.alcatel.sr.ext[15]: Invalid
> > > format for VENDOR.  Expected text like "1,1", got
> > "Extended-Vendor-Specific-1"
> > >
> > > Could you please help in how this should be done?
> > >
> > > Thanks.
> > > -
> > > List info/subscribe/unsubscribe? See
> > > http://www.freeradius.org/list/users.html
> > -
> > List info/subscribe/unsubscribe? See
> > http://www.freeradius.org/list/users.html
> >
> > -
> > List info/subscribe/unsubscribe? See
> > http://www.freeradius.org/list/users.html
> >
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>


More information about the Freeradius-Users mailing list