using ippol
Tevfik Ceydeliler
tevfik.ceydeliler at astron.yasar.com.tr
Fri Jun 19 09:42:43 CEST 2015
radius
I think this document will help u about sqlippool:
http://www.tuxlanding.net/freeradius-style-dhcp-and-high-availability/
regards...
On 06/19/2015 10:28 AM, Randeep wrote:
> Thanks Tevfik.
>
> One question is what name I have to give in db for pool_name.
>
> Should I give main_pool(defined in/etc/raddb/modules/ippool) or the
> sqlippool(defined in /etc/raddb/sqlippool.conf)
>
> Regards,
> Randeep
>
> On Fri, Jun 19, 2015 at 12:40 PM, Tevfik Ceydeliler <
> tevfik.ceydeliler at astron.yasar.com.tr> wrote:
>
>> U have to fill ippool table in sql side
>> mysql> select * from ( select * from radippool order by id desc limit 10)
>> sub order by id ASC;
>>
>> +------+--------------+-----------------+--------------+-----------------+------------------+-------------+----------+----------+
>> | id | pool_name | framedipaddress | nasipaddress | calledstationid |
>> callingstationid | expiry_time | username | pool_key |
>>
>> +------+--------------+-----------------+--------------+-----------------+------------------+-------------+----------+----------+
>> | 5565 | IP_VfoneASOS | 172.30.32.247 | | |
>> | NULL | | |
>> | 5566 | IP_VfoneASOS | 172.30.32.248 | | |
>> | NULL | | |
>> | 5567 | IP_VfoneASOS | 172.30.32.249 | | |
>> | NULL | | |
>> | 5568 | IP_VfoneASOS | 172.30.32.250 | | |
>> | NULL | | |
>> | 5569 | IP_VfoneASOS | 172.30.32.251 | | |
>> | NULL | | |
>> | 5570 | IP_VfoneASOS | 172.30.32.252 | | |
>> | NULL | | |
>> | 5571 | IP_VfoneASOS | 172.30.32.253 | | |
>> | NULL | | |
>> | 5572 | IP_VfoneASOS | 172.30.32.254 | | |
>> | NULL | | |
>> | 5573 | IP_VfoneASOS | 172.30.32.255 | | |
>> | NULL | | |
>> | 5574 | IP_VfoneMEAM | 172.30.97.52 | | |
>> | NULL | | 0 |
>>
>> +------+--------------+-----------------+--------------+-----------------+------------------+-------------+----------+----------+
>>
>>
>>
>> On 06/19/2015 09:39 AM, Randeep wrote:
>>
>>> Hi all,
>>>
>>> I'm trying to configure freeradius to send the ip for the user.
>>>
>>> In the radiusd.conf i have uncommented $INCLUDE sqlippool.conf
>>>
>>> in the sqlippool.conf,
>>>
>>> I have enabled mysql ippool.conf
>>>
>>> in the file /etc/raddb/modules/ippool,
>>>
>>> I have defined ippool main_pool.
>>> And specified the range, netmask etc in the block.
>>>
>>> Key I have specified as
>>> key = "%{NAS-IP-Address} %{NAS-Port}"
>>>
>>> But my radippool table is empty. Do I have to specify anything there?
>>>
>>>
>>> I'm testing with radtest. I hope this can be tested with it.
>>>
>>> In the respose i'm getting like this
>>>
>>> [root at localhost ~]# radtest randeep randeep123 192.168.1.182 0 lukup124
>>> Sent Access-Request Id 110 from 0.0.0.0:49548 to 192.168.1.182:1812
>>> length
>>> 77
>>> User-Name = 'randeep'
>>> User-Password = 'randeep123'
>>> NAS-IP-Address = 127.0.0.1
>>> NAS-Port = 0
>>> Message-Authenticator = 0x00
>>> Cleartext-Password = 'randeep123'
>>> Received Access-Accept Id 110 from 192.168.1.182:1812 to 0.0.0.0:0
>>> length 56
>>> Framed-Protocol = PPP
>>> Framed-IP-Netmask = 255.255.255.0
>>> Framed-MTU = 1500
>>> Framed-Routing = Broadcast-Listen
>>> Framed-Compression = Van-Jacobson-TCP-IP
>>> Service-Type = Framed-User
>>> [root at localhost ~]#
>>>
>>> Do I have to give sqlippool or mainpool in
>>> authenticate/authorize/account/preauth in sites-enabled/default?
>>>
>>> Please advice.
>>>
>>> Regards,
>>> Randeep
>>> -
>>> List info/subscribe/unsubscribe? See
>>> http://www.freeradius.org/list/users.html
>>>
>> --
>> -
>> List info/subscribe/unsubscribe? See
>> http://www.freeradius.org/list/users.html
>
>
>
--
More information about the Freeradius-Users
mailing list