radiusd debug understanding help needed (EAP session for state 0x... did not finish)

[Danner, Mearl]

> -----Original Message-----
> From: Freeradius-Users [mailto:freeradius-users-
> bounces+jmdanner=samford.edu at lists.freeradius.org] On Behalf Of Zeus
> Panchenko
> Sent: Friday, June 26, 2015 2:17 PM
> To: FreeRadius users mailing list
> Subject: Re: radiusd debug understanding help needed (EAP session for
> state 0x... did not finish)
> 
> Arran Cudbard-Bell <a.cudbardb at freeradius.org> wrote:
> 
> >
> > > What you should do:
> > >
> > > 1. Provide packet captures from the supplicant.
> > >
> > > 2. Provide packet captures from the port on your NAS connected to the
> supplicant.
> > >
> > > 3. Provide packet captures from the uplink of your NAS, on which RADIUS
> traffic is sent.
> > >
> > > 4. Provide packet captures from the RADIUS server.
> >
> 
> will it be enough just
> 
> tcpdump -ni interfase-for-auth host my.freeradius.foo
> 
> on both FR and supplicant?
> 
> since both of them are FreeBSD boxes, and the switch they are connected
> to has no tool to capture packets ...

The Cisco switch you mentioned supports port mirroring. Set up the appropriate mirror and use Wireshark on a laptop to capture.

> 
> --
> Zeus V. Panchenko				jid:zeus at im.ibs.dn.ua
> IT Dpt., I.B.S. LLC					  GMT+2 (EET)
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html