test succeeds but can't connect?

[Brian]

Hello,
I am using  FreeRADIUS Version 2.1.12 on CentOS 6.
I set up Freeradius and MSCHAPV2 according to these guides.
http://safesrv.net/install-and-setup-freeradius-on-centos-5/
http://www.tldp.org/HOWTO/8021X-HOWTO/freeradius.html

The tests succeed.
Sending Access-Request of id 148 to 127.0.0.1 port 1812
         User-Name = "test"
         User-Password = "test"
         NAS-IP-Address = 127.0.0.1
         NAS-Port = 0
         Message-Authenticator = 0x00000000000000000000000000000000
rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=148, 
length=20

However when I tried to implement it in WPA2 enterprise on my DD-WRT 
router, I can't connect. It just keeps trying to authenticate on my 
device but never succeeds. I did make sure to select peap/mschapv2. I 
also made sure port 1812 was open on the server and it is, both incoming 
and outgoing.
I can't find any log file that would show any useful info.
I apologize if this is a noob problem but I can't find anything that 
would give a simple answer.
Thank you all.