FreeRadius 3.0.4 | Failed to find "sql" in the "modules" section
Larry Cataina
hdcataina at gmail.com
Fri May 22 09:32:16 CEST 2015
Dear Gerald,
Thank you for the quick response, However I cannot find how to enable or load the sql module,
Appreciate if you can help me. Thanks a lot.
Best Regards,
Larry
On 22 May, 2015, at 3:08 pm, Gerald Vogt <vogt at spamcop.net> wrote:
> You have to enable the sql module. It's not in /etc/raddb/mods-enabled. Only modules in /etc/raddb/mods-enabled are loaded.
>
> -Gerald
>
> On 22/05/15 09:00, Larry Cataina wrote:
>> Dear FreeRADIUS,
>>
>> Greetings!
>> I am a newbie linux system admin.
>> I had setup freeradius 3.04 and tried to use DaloRadius for web management, however I am facing issue as not able to start the radius.
>>
>> error:
>> ******
>> /etc/raddb/sites-enabled/default[372]: Failed to find "sql" in the "modules" section.
>> /etc/raddb/sites-enabled/default[254]: Errors parsing authorize section.
>> ******
>>
>> With the freeradius only, it is working. I do understand modules folder had been changed in version 3.0.4. Already uncommented the most sql in mods-available. I appreciate if you can help me how to fix it.
>> I had attached the radiusD -X logs for your reference.
>> Looking forward for your reply. Thanks
>> =============
>>
>> [root at pacific-technology raddb]# service radiusd start
>> Redirecting to /bin/systemctl start radiusd.service
>> Job for radiusd.service failed. See 'systemctl status radiusd.service' and 'journalctl -xn' for details.
>> [root at pacific-technology raddb]# systemctl status radiusd.service
>> radiusd.service - FreeRADIUS high performance RADIUS server.
>> Loaded: loaded (/usr/lib/systemd/system/radiusd.service; enabled)
>> Active: failed (Result: exit-code) since Fri 2015-05-22 14:17:51 HKT; 12s ago
>> Process: 7050 ExecStartPre=/usr/sbin/radiusd -C (code=exited, status=1/FAILURE)
>> Process: 7048 ExecStartPre=/bin/chown -R radiusd.radiusd /var/run/radiusd (code=exited, status=0/SUCCESS)
>>
>> May 22 14:17:51 pacific-technology systemd[1]: Starting FreeRADIUS high performance RADIUS server....
>> May 22 14:17:51 pacific-technology systemd[1]: radiusd.service: control process exited, code=exited status=1
>> May 22 14:17:51 pacific-technology systemd[1]: Failed to start FreeRADIUS high performance RADIUS server..
>> May 22 14:17:51 pacific-technology systemd[1]: Unit radiusd.service entered failed state.
>> [root at pacific-technology raddb]# radiusd -X
>> radiusd: FreeRADIUS Version 3.0.4, for host x86_64-redhat-linux-gnu, built on Mar 5 2015 at 23:41:36
>> Copyright (C) 1999-2014 The FreeRADIUS server project and contributors
>> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
>> PARTICULAR PURPOSE
>> You may redistribute copies of FreeRADIUS under the terms of the
>> GNU General Public License
>> For more information about these matters, see the file named COPYRIGHT
>> Starting - reading configuration files ...
>> including dictionary file /usr/share/freeradius/dictionary
>> including dictionary file /usr/share/freeradius/dictionary.dhcp
>> including dictionary file /usr/share/freeradius/dictionary.vqp
>> including dictionary file /etc/raddb/dictionary
>> including configuration file /etc/raddb/radiusd.conf
>> including configuration file /etc/raddb/proxy.conf
>> including configuration file /etc/raddb/clients.conf
>> including files in directory /etc/raddb/mods-enabled/
>> including configuration file /etc/raddb/mods-enabled/always
>> including configuration file /etc/raddb/mods-enabled/attr_filter
>> including configuration file /etc/raddb/mods-enabled/cache_eap
>> including configuration file /etc/raddb/mods-enabled/chap
>> including configuration file /etc/raddb/mods-enabled/detail
>> including configuration file /etc/raddb/mods-enabled/detail.log
>> including configuration file /etc/raddb/mods-enabled/dhcp
>> including configuration file /etc/raddb/mods-enabled/digest
>> including configuration file /etc/raddb/mods-enabled/dynamic_clients
>> including configuration file /etc/raddb/mods-enabled/eap
>> including configuration file /etc/raddb/mods-enabled/echo
>> including configuration file /etc/raddb/mods-enabled/exec
>> including configuration file /etc/raddb/mods-enabled/expiration
>> including configuration file /etc/raddb/mods-enabled/expr
>> including configuration file /etc/raddb/mods-enabled/files
>> including configuration file /etc/raddb/mods-enabled/linelog
>> including configuration file /etc/raddb/mods-enabled/logintime
>> including configuration file /etc/raddb/mods-enabled/mschap
>> including configuration file /etc/raddb/mods-enabled/ntlm_auth
>> including configuration file /etc/raddb/mods-enabled/pap
>> including configuration file /etc/raddb/mods-enabled/passwd
>> including configuration file /etc/raddb/mods-enabled/preprocess
>> including configuration file /etc/raddb/mods-enabled/radutmp
>> including configuration file /etc/raddb/mods-enabled/realm
>> including configuration file /etc/raddb/mods-enabled/replicate
>> including configuration file /etc/raddb/mods-enabled/soh
>> including configuration file /etc/raddb/mods-enabled/sradutmp
>> including configuration file /etc/raddb/mods-enabled/unix
>> including configuration file /etc/raddb/mods-enabled/unpack
>> including configuration file /etc/raddb/mods-enabled/utf8
>> including files in directory /etc/raddb/policy.d/
>> including configuration file /etc/raddb/policy.d/accounting
>> including configuration file /etc/raddb/policy.d/canonicalization
>> including configuration file /etc/raddb/policy.d/control
>> including configuration file /etc/raddb/policy.d/cui
>> including configuration file /etc/raddb/policy.d/debug
>> including configuration file /etc/raddb/policy.d/dhcp
>> including configuration file /etc/raddb/policy.d/eap
>> including configuration file /etc/raddb/policy.d/filter
>> including configuration file /etc/raddb/policy.d/operator-name
>> including files in directory /etc/raddb/sites-enabled/
>> including configuration file /etc/raddb/sites-enabled/default
>> including configuration file /etc/raddb/sites-enabled/inner-tunnel
>> main {
>> security {
>> user = "radiusd"
>> group = "radiusd"
>> allow_core_dumps = no
>> }
>> }
>> main {
>> name = "radiusd"
>> prefix = "/usr"
>> localstatedir = "/var"
>> sbindir = "/usr/sbin"
>> logdir = "/var/log/radius"
>> run_dir = "/var/run/radiusd"
>> libdir = "/usr/lib64/freeradius"
>> radacctdir = "/var/log/radius/radacct"
>> hostname_lookups = no
>> max_request_time = 30
>> cleanup_delay = 5
>> max_requests = 1024
>> pidfile = "/var/run/radiusd/radiusd.pid"
>> checkrad = "/usr/sbin/checkrad"
>> debug_level = 0
>> proxy_requests = yes
>> log {
>> stripped_names = no
>> auth = no
>> auth_badpass = no
>> auth_goodpass = no
>> colourise = yes
>> msg_denied = "You are already logged in - access denied"
>> }
>> security {
>> max_attributes = 200
>> reject_delay = 1
>> status_server = yes
>> }
>> }
>> radiusd: #### Loading Realms and Home Servers ####
>> proxy server {
>> retry_delay = 5
>> retry_count = 3
>> default_fallback = no
>> dead_time = 120
>> wake_all_if_all_dead = no
>> }
>> home_server localhost {
>> ipaddr = 127.0.0.1
>> port = 1812
>> type = "auth"
>> secret = <<< secret >>>
>> response_window = 20.000000
>> response_timeouts = 1
>> max_outstanding = 65536
>> zombie_period = 40
>> status_check = "status-server"
>> ping_interval = 30
>> check_interval = 30
>> check_timeout = 4
>> num_answers_to_alive = 3
>> revive_interval = 120
>> coa {
>> irt = 2
>> mrt = 16
>> mrc = 5
>> mrd = 30
>> }
>> limit {
>> max_connections = 16
>> max_requests = 0
>> lifetime = 0
>> idle_timeout = 0
>> }
>> }
>> home_server_pool my_auth_failover {
>> type = fail-over
>> home_server = localhost
>> }
>> realm example.com {
>> auth_pool = my_auth_failover
>> }
>> realm LOCAL {
>> }
>> radiusd: #### Loading Clients ####
>> client 10.10.10.0/24 {
>> require_message_authenticator = no
>> secret = <<< secret >>>
>> nas_type = "other"
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 10.10.10.0/24. Please fix your configuration
>> Support for old-style clients will be removed in a future release
>> client 192.168.100.0/24 {
>> require_message_authenticator = no
>> secret = <<< secret >>>
>> nas_type = "other"
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 192.168.100.0/24. Please fix your configuration
>> Support for old-style clients will be removed in a future release
>> client localhost {
>> ipaddr = 127.0.0.1
>> require_message_authenticator = no
>> secret = <<< secret >>>
>> nas_type = "other"
>> proto = "*"
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> client localhost_ipv6 {
>> ipv6addr = ::1
>> require_message_authenticator = no
>> secret = <<< secret >>>
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> radiusd: #### Instantiating modules ####
>> instantiate {
>> }
>> modules {
>> # Loaded module rlm_always
>> # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
>> always reject {
>> rcode = "reject"
>> simulcount = 0
>> mpp = no
>> }
>> # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
>> always fail {
>> rcode = "fail"
>> simulcount = 0
>> mpp = no
>> }
>> # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
>> always ok {
>> rcode = "ok"
>> simulcount = 0
>> mpp = no
>> }
>> # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
>> always handled {
>> rcode = "handled"
>> simulcount = 0
>> mpp = no
>> }
>> # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
>> always invalid {
>> rcode = "invalid"
>> simulcount = 0
>> mpp = no
>> }
>> # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
>> always userlock {
>> rcode = "userlock"
>> simulcount = 0
>> mpp = no
>> }
>> # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
>> always notfound {
>> rcode = "notfound"
>> simulcount = 0
>> mpp = no
>> }
>> # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
>> always noop {
>> rcode = "noop"
>> simulcount = 0
>> mpp = no
>> }
>> # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
>> always updated {
>> rcode = "updated"
>> simulcount = 0
>> mpp = no
>> }
>> # Loaded module rlm_attr_filter
>> # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
>> attr_filter attr_filter.post-proxy {
>> filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
>> key = "%{Realm}"
>> relaxed = no
>> }
>> reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
>> # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
>> attr_filter attr_filter.pre-proxy {
>> filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
>> key = "%{Realm}"
>> relaxed = no
>> }
>> reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
>> # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
>> attr_filter attr_filter.access_reject {
>> filename = "/etc/raddb/mods-config/attr_filter/access_reject"
>> key = "%{User-Name}"
>> relaxed = no
>> }
>> reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
>> # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
>> attr_filter attr_filter.access_challenge {
>> filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
>> key = "%{User-Name}"
>> relaxed = no
>> }
>> reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
>> # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
>> attr_filter attr_filter.accounting_response {
>> filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
>> key = "%{User-Name}"
>> relaxed = no
>> }
>> reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
>> # Loaded module rlm_cache
>> # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
>> cache cache_eap {
>> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
>> ttl = 15
>> max_entries = 16384
>> epoch = 0
>> add_stats = no
>> }
>> # Loaded module rlm_chap
>> # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap
>> # Loaded module rlm_detail
>> # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
>> detail {
>> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> log_packet_header = no
>> }
>> # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log
>> detail auth_log {
>> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> log_packet_header = no
>> }
>> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
>> # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log
>> detail reply_log {
>> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> log_packet_header = no
>> }
>> # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
>> detail pre_proxy_log {
>> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> log_packet_header = no
>> }
>> # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
>> detail post_proxy_log {
>> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> log_packet_header = no
>> }
>> # Loaded module rlm_dhcp
>> # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp
>> # Loaded module rlm_digest
>> # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest
>> # Loaded module rlm_dynamic_clients
>> # Instantiating module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients
>> # Loaded module rlm_eap
>> # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
>> eap {
>> default_eap_type = "md5"
>> timer_expire = 60
>> ignore_unknown_eap_types = no
>> mod_accounting_username_bug = no
>> max_sessions = 1024
>> }
>> # Linked to sub-module rlm_eap_md5
>> # Linked to sub-module rlm_eap_leap
>> # Linked to sub-module rlm_eap_gtc
>> gtc {
>> challenge = "Password: "
>> auth_type = "PAP"
>> }
>> # Linked to sub-module rlm_eap_tls
>> tls {
>> tls = "tls-common"
>> }
>> tls-config tls-common {
>> rsa_key_exchange = no
>> dh_key_exchange = yes
>> rsa_key_length = 512
>> dh_key_length = 512
>> verify_depth = 0
>> ca_path = "/etc/raddb/certs"
>> pem_file_type = yes
>> private_key_file = "/etc/raddb/certs/server.pem"
>> certificate_file = "/etc/raddb/certs/server.pem"
>> ca_file = "/etc/raddb/certs/ca.pem"
>> private_key_password = <<< secret >>>
>> dh_file = "/etc/raddb/certs/dh"
>> fragment_size = 1024
>> include_length = yes
>> check_crl = no
>> cipher_list = "DEFAULT"
>> ecdh_curve = "prime256v1"
>> cache {
>> enable = yes
>> lifetime = 24
>> max_entries = 255
>> }
>> verify {
>> }
>> ocsp {
>> enable = no
>> override_cert_url = yes
>> url = "http://127.0.0.1/ocsp/"
>> use_nonce = yes
>> timeout = 0
>> softfail = yes
>> }
>> }
>> # Linked to sub-module rlm_eap_ttls
>> ttls {
>> tls = "tls-common"
>> default_eap_type = "md5"
>> copy_request_to_tunnel = no
>> use_tunneled_reply = no
>> virtual_server = "inner-tunnel"
>> include_length = yes
>> require_client_cert = no
>> }
>> Using cached TLS configuration from previous invocation
>> # Linked to sub-module rlm_eap_peap
>> peap {
>> tls = "tls-common"
>> default_method = "mschapv2"
>> copy_request_to_tunnel = no
>> use_tunneled_reply = no
>> proxy_tunneled_request_as_eap = yes
>> virtual_server = "inner-tunnel"
>> soh = no
>> require_client_cert = no
>> }
>> Using cached TLS configuration from previous invocation
>> # Linked to sub-module rlm_eap_mschapv2
>> mschapv2 {
>> with_ntdomain_hack = no
>> send_error = no
>> }
>> # Loaded module rlm_exec
>> # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo
>> exec echo {
>> wait = yes
>> program = "/bin/echo %{User-Name}"
>> input_pairs = "request"
>> output_pairs = "reply"
>> shell_escape = yes
>> }
>> # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec
>> exec {
>> wait = no
>> input_pairs = "request"
>> shell_escape = yes
>> timeout = 10
>> }
>> # Loaded module rlm_expiration
>> # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration
>> # Loaded module rlm_expr
>> # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr
>> expr {
>> safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
>> }
>> # Loaded module rlm_files
>> # Instantiating module "files" from file /etc/raddb/mods-enabled/files
>> files {
>> filename = "/etc/raddb/mods-config/files/authorize"
>> usersfile = "/etc/raddb/mods-config/files/authorize"
>> acctusersfile = "/etc/raddb/mods-config/files/accounting"
>> preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
>> compat = "cistron"
>> }
>> reading pairlist file /etc/raddb/mods-config/files/authorize
>> [/etc/raddb/mods-config/files/authorize]:86 Cistron compatibility checks for entry gannis ...
>> [/etc/raddb/mods-config/files/authorize]:89 Cistron compatibility checks for entry thomas ...
>> [/etc/raddb/mods-config/files/authorize]:92 Cistron compatibility checks for entry larry ...
>> [/etc/raddb/mods-config/files/authorize]:95 Cistron compatibility checks for entry demo1 ...
>> [/etc/raddb/mods-config/files/authorize]:98 Cistron compatibility checks for entry bob ...
>> [/etc/raddb/mods-config/files/authorize]:101 Cistron compatibility checks for entry test ...
>> [/etc/raddb/mods-config/files/authorize]:103 Cistron compatibility checks for entry crew1 ...
>> [/etc/raddb/mods-config/files/authorize]:194 Cistron compatibility checks for entry DEFAULT ...
>> [/etc/raddb/mods-config/files/authorize]:201 Cistron compatibility checks for entry DEFAULT ...
>> [/etc/raddb/mods-config/files/authorize]:208 Cistron compatibility checks for entry DEFAULT ...
>> reading pairlist file /etc/raddb/mods-config/files/authorize
>> [/etc/raddb/mods-config/files/authorize]:86 Cistron compatibility checks for entry gannis ...
>> [/etc/raddb/mods-config/files/authorize]:89 Cistron compatibility checks for entry thomas ...
>> [/etc/raddb/mods-config/files/authorize]:92 Cistron compatibility checks for entry larry ...
>> [/etc/raddb/mods-config/files/authorize]:95 Cistron compatibility checks for entry demo1 ...
>> [/etc/raddb/mods-config/files/authorize]:98 Cistron compatibility checks for entry bob ...
>> [/etc/raddb/mods-config/files/authorize]:101 Cistron compatibility checks for entry test ...
>> [/etc/raddb/mods-config/files/authorize]:103 Cistron compatibility checks for entry crew1 ...
>> [/etc/raddb/mods-config/files/authorize]:194 Cistron compatibility checks for entry DEFAULT ...
>> [/etc/raddb/mods-config/files/authorize]:201 Cistron compatibility checks for entry DEFAULT ...
>> [/etc/raddb/mods-config/files/authorize]:208 Cistron compatibility checks for entry DEFAULT ...
>> reading pairlist file /etc/raddb/mods-config/files/accounting
>> reading pairlist file /etc/raddb/mods-config/files/pre-proxy
>> # Loaded module rlm_linelog
>> # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
>> linelog {
>> filename = "/var/log/radius/linelog"
>> permissions = 384
>> format = "This is a log message for %{User-Name}"
>> reference = "messages.%{%{Packet-Type}:-default}"
>> }
>> # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog
>> linelog log_accounting {
>> filename = "/var/log/radius/linelog-accounting"
>> permissions = 384
>> format = ""
>> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
>> }
>> # Loaded module rlm_logintime
>> # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime
>> logintime {
>> minimum_timeout = 60
>> }
>> # Loaded module rlm_mschap
>> # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
>> mschap {
>> use_mppe = yes
>> require_encryption = no
>> require_strong = no
>> with_ntdomain_hack = yes
>> passchange {
>> }
>> allow_retry = yes
>> }
>> # Instantiating module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
>> exec ntlm_auth {
>> wait = yes
>> program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
>> shell_escape = yes
>> }
>> # Loaded module rlm_pap
>> # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
>> pap {
>> normalise = yes
>> }
>> # Loaded module rlm_passwd
>> # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
>> passwd etc_passwd {
>> filename = "/etc/passwd"
>> format = "*User-Name:Crypt-Password:"
>> delimiter = ":"
>> ignore_nislike = no
>> ignore_empty = yes
>> allow_multiple_keys = no
>> hash_size = 100
>> }
>> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
>> # Loaded module rlm_preprocess
>> # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess
>> preprocess {
>> huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
>> hints = "/etc/raddb/mods-config/preprocess/hints"
>> with_ascend_hack = no
>> ascend_channels_per_line = 23
>> with_ntdomain_hack = no
>> with_specialix_jetstream_hack = no
>> with_cisco_vsa_hack = no
>> with_alvarion_vsa_hack = no
>> }
>> reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
>> reading pairlist file /etc/raddb/mods-config/preprocess/hints
>> # Loaded module rlm_radutmp
>> # Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp
>> radutmp {
>> filename = "/var/log/radius/radutmp"
>> username = "%{User-Name}"
>> case_sensitive = yes
>> check_with_nas = yes
>> permissions = 384
>> caller_id = yes
>> }
>> # Loaded module rlm_realm
>> # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
>> realm IPASS {
>> format = "prefix"
>> delimiter = "/"
>> ignore_default = no
>> ignore_null = no
>> }
>> # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
>> realm suffix {
>> format = "suffix"
>> delimiter = "@"
>> ignore_default = no
>> ignore_null = no
>> }
>> # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm
>> realm realmpercent {
>> format = "suffix"
>> delimiter = "%"
>> ignore_default = no
>> ignore_null = no
>> }
>> # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
>> realm ntdomain {
>> format = "prefix"
>> delimiter = "\"
>> ignore_default = no
>> ignore_null = no
>> }
>> # Loaded module rlm_replicate
>> # Instantiating module "replicate" from file /etc/raddb/mods-enabled/replicate
>> # Loaded module rlm_soh
>> # Instantiating module "soh" from file /etc/raddb/mods-enabled/soh
>> soh {
>> dhcp = yes
>> }
>> # Instantiating module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
>> radutmp sradutmp {
>> filename = "/var/log/radius/sradutmp"
>> username = "%{User-Name}"
>> case_sensitive = yes
>> check_with_nas = yes
>> permissions = 420
>> caller_id = no
>> }
>> # Loaded module rlm_unix
>> # Instantiating module "unix" from file /etc/raddb/mods-enabled/unix
>> unix {
>> radwtmp = "/var/log/radius/radwtmp"
>> }
>> # Loaded module rlm_unpack
>> # Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack
>> # Loaded module rlm_utf8
>> # Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8
>> } # modules
>> radiusd: #### Loading Virtual Servers ####
>> server { # from file /etc/raddb/radiusd.conf
>> } # server
>> server default { # from file /etc/raddb/sites-enabled/default
>> # Creating Auth-Type = digest
>> # Loading authenticate {...}
>> # Loading authorize {...}
>> /etc/raddb/sites-enabled/default[372]: Failed to find "sql" in the "modules" section.
>> /etc/raddb/sites-enabled/default[254]: Errors parsing authorize section.
>> [root at pacific-technology raddb]#
>>
>>
>> Best Regards,
>> Larry
>> -
>> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list