FreeRadius 3.0.4 | Failed to find "sql" in the "modules" section
Larry Cataina
hdcataina at gmail.com
Fri May 22 09:57:59 CEST 2015
Hi Gerald,
Noted, will go through again with the Readme file first before going further.
Thank you.
Regards,
Larry
On 22 May, 2015, at 3:49 pm, Gerald Vogt <vogt at spamcop.net> wrote:
> Did you read the README.rst file?
>
> /etc/raddb/README.rst
>
> -Gerald
>
>
> On 22/05/15 09:32, Larry Cataina wrote:
>> Dear Gerald,
>>
>> Thank you for the quick response, However I cannot find how to enable or load the sql module,
>> Appreciate if you can help me. Thanks a lot.
>>
>> Best Regards,
>> Larry
>>
>>
>> On 22 May, 2015, at 3:08 pm, Gerald Vogt <vogt at spamcop.net> wrote:
>>
>>> You have to enable the sql module. It's not in /etc/raddb/mods-enabled. Only modules in /etc/raddb/mods-enabled are loaded.
>>>
>>> -Gerald
>>>
>>> On 22/05/15 09:00, Larry Cataina wrote:
>>>> Dear FreeRADIUS,
>>>>
>>>> Greetings!
>>>> I am a newbie linux system admin.
>>>> I had setup freeradius 3.04 and tried to use DaloRadius for web management, however I am facing issue as not able to start the radius.
>>>>
>>>> error:
>>>> ******
>>>> /etc/raddb/sites-enabled/default[372]: Failed to find "sql" in the "modules" section.
>>>> /etc/raddb/sites-enabled/default[254]: Errors parsing authorize section.
>>>> ******
>>>>
>>>> With the freeradius only, it is working. I do understand modules folder had been changed in version 3.0.4. Already uncommented the most sql in mods-available. I appreciate if you can help me how to fix it.
>>>> I had attached the radiusD -X logs for your reference.
>>>> Looking forward for your reply. Thanks
>>>> =============
>>>>
>>>> [root at pacific-technology raddb]# service radiusd start
>>>> Redirecting to /bin/systemctl start radiusd.service
>>>> Job for radiusd.service failed. See 'systemctl status radiusd.service' and 'journalctl -xn' for details.
>>>> [root at pacific-technology raddb]# systemctl status radiusd.service
>>>> radiusd.service - FreeRADIUS high performance RADIUS server.
>>>> Loaded: loaded (/usr/lib/systemd/system/radiusd.service; enabled)
>>>> Active: failed (Result: exit-code) since Fri 2015-05-22 14:17:51 HKT; 12s ago
>>>> Process: 7050 ExecStartPre=/usr/sbin/radiusd -C (code=exited, status=1/FAILURE)
>>>> Process: 7048 ExecStartPre=/bin/chown -R radiusd.radiusd /var/run/radiusd (code=exited, status=0/SUCCESS)
>>>>
>>>> May 22 14:17:51 pacific-technology systemd[1]: Starting FreeRADIUS high performance RADIUS server....
>>>> May 22 14:17:51 pacific-technology systemd[1]: radiusd.service: control process exited, code=exited status=1
>>>> May 22 14:17:51 pacific-technology systemd[1]: Failed to start FreeRADIUS high performance RADIUS server..
>>>> May 22 14:17:51 pacific-technology systemd[1]: Unit radiusd.service entered failed state.
>>>> [root at pacific-technology raddb]# radiusd -X
>>>> radiusd: FreeRADIUS Version 3.0.4, for host x86_64-redhat-linux-gnu, built on Mar 5 2015 at 23:41:36
>>>> Copyright (C) 1999-2014 The FreeRADIUS server project and contributors
>>>> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
>>>> PARTICULAR PURPOSE
>>>> You may redistribute copies of FreeRADIUS under the terms of the
>>>> GNU General Public License
>>>> For more information about these matters, see the file named COPYRIGHT
>>>> Starting - reading configuration files ...
>>>> including dictionary file /usr/share/freeradius/dictionary
>>>> including dictionary file /usr/share/freeradius/dictionary.dhcp
>>>> including dictionary file /usr/share/freeradius/dictionary.vqp
>>>> including dictionary file /etc/raddb/dictionary
>>>> including configuration file /etc/raddb/radiusd.conf
>>>> including configuration file /etc/raddb/proxy.conf
>>>> including configuration file /etc/raddb/clients.conf
>>>> including files in directory /etc/raddb/mods-enabled/
>>>> including configuration file /etc/raddb/mods-enabled/always
>>>> including configuration file /etc/raddb/mods-enabled/attr_filter
>>>> including configuration file /etc/raddb/mods-enabled/cache_eap
>>>> including configuration file /etc/raddb/mods-enabled/chap
>>>> including configuration file /etc/raddb/mods-enabled/detail
>>>> including configuration file /etc/raddb/mods-enabled/detail.log
>>>> including configuration file /etc/raddb/mods-enabled/dhcp
>>>> including configuration file /etc/raddb/mods-enabled/digest
>>>> including configuration file /etc/raddb/mods-enabled/dynamic_clients
>>>> including configuration file /etc/raddb/mods-enabled/eap
>>>> including configuration file /etc/raddb/mods-enabled/echo
>>>> including configuration file /etc/raddb/mods-enabled/exec
>>>> including configuration file /etc/raddb/mods-enabled/expiration
>>>> including configuration file /etc/raddb/mods-enabled/expr
>>>> including configuration file /etc/raddb/mods-enabled/files
>>>> including configuration file /etc/raddb/mods-enabled/linelog
>>>> including configuration file /etc/raddb/mods-enabled/logintime
>>>> including configuration file /etc/raddb/mods-enabled/mschap
>>>> including configuration file /etc/raddb/mods-enabled/ntlm_auth
>>>> including configuration file /etc/raddb/mods-enabled/pap
>>>> including configuration file /etc/raddb/mods-enabled/passwd
>>>> including configuration file /etc/raddb/mods-enabled/preprocess
>>>> including configuration file /etc/raddb/mods-enabled/radutmp
>>>> including configuration file /etc/raddb/mods-enabled/realm
>>>> including configuration file /etc/raddb/mods-enabled/replicate
>>>> including configuration file /etc/raddb/mods-enabled/soh
>>>> including configuration file /etc/raddb/mods-enabled/sradutmp
>>>> including configuration file /etc/raddb/mods-enabled/unix
>>>> including configuration file /etc/raddb/mods-enabled/unpack
>>>> including configuration file /etc/raddb/mods-enabled/utf8
>>>> including files in directory /etc/raddb/policy.d/
>>>> including configuration file /etc/raddb/policy.d/accounting
>>>> including configuration file /etc/raddb/policy.d/canonicalization
>>>> including configuration file /etc/raddb/policy.d/control
>>>> including configuration file /etc/raddb/policy.d/cui
>>>> including configuration file /etc/raddb/policy.d/debug
>>>> including configuration file /etc/raddb/policy.d/dhcp
>>>> including configuration file /etc/raddb/policy.d/eap
>>>> including configuration file /etc/raddb/policy.d/filter
>>>> including configuration file /etc/raddb/policy.d/operator-name
>>>> including files in directory /etc/raddb/sites-enabled/
>>>> including configuration file /etc/raddb/sites-enabled/default
>>>> including configuration file /etc/raddb/sites-enabled/inner-tunnel
>>>> main {
>>>> security {
>>>> user = "radiusd"
>>>> group = "radiusd"
>>>> allow_core_dumps = no
>>>> }
>>>> }
>>>> main {
>>>> name = "radiusd"
>>>> prefix = "/usr"
>>>> localstatedir = "/var"
>>>> sbindir = "/usr/sbin"
>>>> logdir = "/var/log/radius"
>>>> run_dir = "/var/run/radiusd"
>>>> libdir = "/usr/lib64/freeradius"
>>>> radacctdir = "/var/log/radius/radacct"
>>>> hostname_lookups = no
>>>> max_request_time = 30
>>>> cleanup_delay = 5
>>>> max_requests = 1024
>>>> pidfile = "/var/run/radiusd/radiusd.pid"
>>>> checkrad = "/usr/sbin/checkrad"
>>>> debug_level = 0
>>>> proxy_requests = yes
>>>> log {
>>>> stripped_names = no
>>>> auth = no
>>>> auth_badpass = no
>>>> auth_goodpass = no
>>>> colourise = yes
>>>> msg_denied = "You are already logged in - access denied"
>>>> }
>>>> security {
>>>> max_attributes = 200
>>>> reject_delay = 1
>>>> status_server = yes
>>>> }
>>>> }
>>>> radiusd: #### Loading Realms and Home Servers ####
>>>> proxy server {
>>>> retry_delay = 5
>>>> retry_count = 3
>>>> default_fallback = no
>>>> dead_time = 120
>>>> wake_all_if_all_dead = no
>>>> }
>>>> home_server localhost {
>>>> ipaddr = 127.0.0.1
>>>> port = 1812
>>>> type = "auth"
>>>> secret = <<< secret >>>
>>>> response_window = 20.000000
>>>> response_timeouts = 1
>>>> max_outstanding = 65536
>>>> zombie_period = 40
>>>> status_check = "status-server"
>>>> ping_interval = 30
>>>> check_interval = 30
>>>> check_timeout = 4
>>>> num_answers_to_alive = 3
>>>> revive_interval = 120
>>>> coa {
>>>> irt = 2
>>>> mrt = 16
>>>> mrc = 5
>>>> mrd = 30
>>>> }
>>>> limit {
>>>> max_connections = 16
>>>> max_requests = 0
>>>> lifetime = 0
>>>> idle_timeout = 0
>>>> }
>>>> }
>>>> home_server_pool my_auth_failover {
>>>> type = fail-over
>>>> home_server = localhost
>>>> }
>>>> realm example.com {
>>>> auth_pool = my_auth_failover
>>>> }
>>>> realm LOCAL {
>>>> }
>>>> radiusd: #### Loading Clients ####
>>>> client 10.10.10.0/24 {
>>>> require_message_authenticator = no
>>>> secret = <<< secret >>>
>>>> nas_type = "other"
>>>> limit {
>>>> max_connections = 16
>>>> lifetime = 0
>>>> idle_timeout = 30
>>>> }
>>>> }
>>>> No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 10.10.10.0/24. Please fix your configuration
>>>> Support for old-style clients will be removed in a future release
>>>> client 192.168.100.0/24 {
>>>> require_message_authenticator = no
>>>> secret = <<< secret >>>
>>>> nas_type = "other"
>>>> limit {
>>>> max_connections = 16
>>>> lifetime = 0
>>>> idle_timeout = 30
>>>> }
>>>> }
>>>> No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 192.168.100.0/24. Please fix your configuration
>>>> Support for old-style clients will be removed in a future release
>>>> client localhost {
>>>> ipaddr = 127.0.0.1
>>>> require_message_authenticator = no
>>>> secret = <<< secret >>>
>>>> nas_type = "other"
>>>> proto = "*"
>>>> limit {
>>>> max_connections = 16
>>>> lifetime = 0
>>>> idle_timeout = 30
>>>> }
>>>> }
>>>> client localhost_ipv6 {
>>>> ipv6addr = ::1
>>>> require_message_authenticator = no
>>>> secret = <<< secret >>>
>>>> limit {
>>>> max_connections = 16
>>>> lifetime = 0
>>>> idle_timeout = 30
>>>> }
>>>> }
>>>> radiusd: #### Instantiating modules ####
>>>> instantiate {
>>>> }
>>>> modules {
>>>> # Loaded module rlm_always
>>>> # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
>>>> always reject {
>>>> rcode = "reject"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
>>>> always fail {
>>>> rcode = "fail"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
>>>> always ok {
>>>> rcode = "ok"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
>>>> always handled {
>>>> rcode = "handled"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
>>>> always invalid {
>>>> rcode = "invalid"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
>>>> always userlock {
>>>> rcode = "userlock"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
>>>> always notfound {
>>>> rcode = "notfound"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
>>>> always noop {
>>>> rcode = "noop"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
>>>> always updated {
>>>> rcode = "updated"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Loaded module rlm_attr_filter
>>>> # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
>>>> attr_filter attr_filter.post-proxy {
>>>> filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
>>>> key = "%{Realm}"
>>>> relaxed = no
>>>> }
>>>> reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
>>>> # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
>>>> attr_filter attr_filter.pre-proxy {
>>>> filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
>>>> key = "%{Realm}"
>>>> relaxed = no
>>>> }
>>>> reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
>>>> # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
>>>> attr_filter attr_filter.access_reject {
>>>> filename = "/etc/raddb/mods-config/attr_filter/access_reject"
>>>> key = "%{User-Name}"
>>>> relaxed = no
>>>> }
>>>> reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
>>>> # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
>>>> attr_filter attr_filter.access_challenge {
>>>> filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
>>>> key = "%{User-Name}"
>>>> relaxed = no
>>>> }
>>>> reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
>>>> # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
>>>> attr_filter attr_filter.accounting_response {
>>>> filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
>>>> key = "%{User-Name}"
>>>> relaxed = no
>>>> }
>>>> reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
>>>> # Loaded module rlm_cache
>>>> # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
>>>> cache cache_eap {
>>>> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
>>>> ttl = 15
>>>> max_entries = 16384
>>>> epoch = 0
>>>> add_stats = no
>>>> }
>>>> # Loaded module rlm_chap
>>>> # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap
>>>> # Loaded module rlm_detail
>>>> # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
>>>> detail {
>>>> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
>>>> header = "%t"
>>>> permissions = 384
>>>> locking = no
>>>> log_packet_header = no
>>>> }
>>>> # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log
>>>> detail auth_log {
>>>> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
>>>> header = "%t"
>>>> permissions = 384
>>>> locking = no
>>>> log_packet_header = no
>>>> }
>>>> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
>>>> # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log
>>>> detail reply_log {
>>>> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
>>>> header = "%t"
>>>> permissions = 384
>>>> locking = no
>>>> log_packet_header = no
>>>> }
>>>> # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
>>>> detail pre_proxy_log {
>>>> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
>>>> header = "%t"
>>>> permissions = 384
>>>> locking = no
>>>> log_packet_header = no
>>>> }
>>>> # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
>>>> detail post_proxy_log {
>>>> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
>>>> header = "%t"
>>>> permissions = 384
>>>> locking = no
>>>> log_packet_header = no
>>>> }
>>>> # Loaded module rlm_dhcp
>>>> # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp
>>>> # Loaded module rlm_digest
>>>> # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest
>>>> # Loaded module rlm_dynamic_clients
>>>> # Instantiating module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients
>>>> # Loaded module rlm_eap
>>>> # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
>>>> eap {
>>>> default_eap_type = "md5"
>>>> timer_expire = 60
>>>> ignore_unknown_eap_types = no
>>>> mod_accounting_username_bug = no
>>>> max_sessions = 1024
>>>> }
>>>> # Linked to sub-module rlm_eap_md5
>>>> # Linked to sub-module rlm_eap_leap
>>>> # Linked to sub-module rlm_eap_gtc
>>>> gtc {
>>>> challenge = "Password: "
>>>> auth_type = "PAP"
>>>> }
>>>> # Linked to sub-module rlm_eap_tls
>>>> tls {
>>>> tls = "tls-common"
>>>> }
>>>> tls-config tls-common {
>>>> rsa_key_exchange = no
>>>> dh_key_exchange = yes
>>>> rsa_key_length = 512
>>>> dh_key_length = 512
>>>> verify_depth = 0
>>>> ca_path = "/etc/raddb/certs"
>>>> pem_file_type = yes
>>>> private_key_file = "/etc/raddb/certs/server.pem"
>>>> certificate_file = "/etc/raddb/certs/server.pem"
>>>> ca_file = "/etc/raddb/certs/ca.pem"
>>>> private_key_password = <<< secret >>>
>>>> dh_file = "/etc/raddb/certs/dh"
>>>> fragment_size = 1024
>>>> include_length = yes
>>>> check_crl = no
>>>> cipher_list = "DEFAULT"
>>>> ecdh_curve = "prime256v1"
>>>> cache {
>>>> enable = yes
>>>> lifetime = 24
>>>> max_entries = 255
>>>> }
>>>> verify {
>>>> }
>>>> ocsp {
>>>> enable = no
>>>> override_cert_url = yes
>>>> url = "http://127.0.0.1/ocsp/"
>>>> use_nonce = yes
>>>> timeout = 0
>>>> softfail = yes
>>>> }
>>>> }
>>>> # Linked to sub-module rlm_eap_ttls
>>>> ttls {
>>>> tls = "tls-common"
>>>> default_eap_type = "md5"
>>>> copy_request_to_tunnel = no
>>>> use_tunneled_reply = no
>>>> virtual_server = "inner-tunnel"
>>>> include_length = yes
>>>> require_client_cert = no
>>>> }
>>>> Using cached TLS configuration from previous invocation
>>>> # Linked to sub-module rlm_eap_peap
>>>> peap {
>>>> tls = "tls-common"
>>>> default_method = "mschapv2"
>>>> copy_request_to_tunnel = no
>>>> use_tunneled_reply = no
>>>> proxy_tunneled_request_as_eap = yes
>>>> virtual_server = "inner-tunnel"
>>>> soh = no
>>>> require_client_cert = no
>>>> }
>>>> Using cached TLS configuration from previous invocation
>>>> # Linked to sub-module rlm_eap_mschapv2
>>>> mschapv2 {
>>>> with_ntdomain_hack = no
>>>> send_error = no
>>>> }
>>>> # Loaded module rlm_exec
>>>> # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo
>>>> exec echo {
>>>> wait = yes
>>>> program = "/bin/echo %{User-Name}"
>>>> input_pairs = "request"
>>>> output_pairs = "reply"
>>>> shell_escape = yes
>>>> }
>>>> # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec
>>>> exec {
>>>> wait = no
>>>> input_pairs = "request"
>>>> shell_escape = yes
>>>> timeout = 10
>>>> }
>>>> # Loaded module rlm_expiration
>>>> # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration
>>>> # Loaded module rlm_expr
>>>> # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr
>>>> expr {
>>>> safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
>>>> }
>>>> # Loaded module rlm_files
>>>> # Instantiating module "files" from file /etc/raddb/mods-enabled/files
>>>> files {
>>>> filename = "/etc/raddb/mods-config/files/authorize"
>>>> usersfile = "/etc/raddb/mods-config/files/authorize"
>>>> acctusersfile = "/etc/raddb/mods-config/files/accounting"
>>>> preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
>>>> compat = "cistron"
>>>> }
>>>> reading pairlist file /etc/raddb/mods-config/files/authorize
>>>> [/etc/raddb/mods-config/files/authorize]:86 Cistron compatibility checks for entry gannis ...
>>>> [/etc/raddb/mods-config/files/authorize]:89 Cistron compatibility checks for entry thomas ...
>>>> [/etc/raddb/mods-config/files/authorize]:92 Cistron compatibility checks for entry larry ...
>>>> [/etc/raddb/mods-config/files/authorize]:95 Cistron compatibility checks for entry demo1 ...
>>>> [/etc/raddb/mods-config/files/authorize]:98 Cistron compatibility checks for entry bob ...
>>>> [/etc/raddb/mods-config/files/authorize]:101 Cistron compatibility checks for entry test ...
>>>> [/etc/raddb/mods-config/files/authorize]:103 Cistron compatibility checks for entry crew1 ...
>>>> [/etc/raddb/mods-config/files/authorize]:194 Cistron compatibility checks for entry DEFAULT ...
>>>> [/etc/raddb/mods-config/files/authorize]:201 Cistron compatibility checks for entry DEFAULT ...
>>>> [/etc/raddb/mods-config/files/authorize]:208 Cistron compatibility checks for entry DEFAULT ...
>>>> reading pairlist file /etc/raddb/mods-config/files/authorize
>>>> [/etc/raddb/mods-config/files/authorize]:86 Cistron compatibility checks for entry gannis ...
>>>> [/etc/raddb/mods-config/files/authorize]:89 Cistron compatibility checks for entry thomas ...
>>>> [/etc/raddb/mods-config/files/authorize]:92 Cistron compatibility checks for entry larry ...
>>>> [/etc/raddb/mods-config/files/authorize]:95 Cistron compatibility checks for entry demo1 ...
>>>> [/etc/raddb/mods-config/files/authorize]:98 Cistron compatibility checks for entry bob ...
>>>> [/etc/raddb/mods-config/files/authorize]:101 Cistron compatibility checks for entry test ...
>>>> [/etc/raddb/mods-config/files/authorize]:103 Cistron compatibility checks for entry crew1 ...
>>>> [/etc/raddb/mods-config/files/authorize]:194 Cistron compatibility checks for entry DEFAULT ...
>>>> [/etc/raddb/mods-config/files/authorize]:201 Cistron compatibility checks for entry DEFAULT ...
>>>> [/etc/raddb/mods-config/files/authorize]:208 Cistron compatibility checks for entry DEFAULT ...
>>>> reading pairlist file /etc/raddb/mods-config/files/accounting
>>>> reading pairlist file /etc/raddb/mods-config/files/pre-proxy
>>>> # Loaded module rlm_linelog
>>>> # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
>>>> linelog {
>>>> filename = "/var/log/radius/linelog"
>>>> permissions = 384
>>>> format = "This is a log message for %{User-Name}"
>>>> reference = "messages.%{%{Packet-Type}:-default}"
>>>> }
>>>> # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog
>>>> linelog log_accounting {
>>>> filename = "/var/log/radius/linelog-accounting"
>>>> permissions = 384
>>>> format = ""
>>>> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
>>>> }
>>>> # Loaded module rlm_logintime
>>>> # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime
>>>> logintime {
>>>> minimum_timeout = 60
>>>> }
>>>> # Loaded module rlm_mschap
>>>> # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
>>>> mschap {
>>>> use_mppe = yes
>>>> require_encryption = no
>>>> require_strong = no
>>>> with_ntdomain_hack = yes
>>>> passchange {
>>>> }
>>>> allow_retry = yes
>>>> }
>>>> # Instantiating module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
>>>> exec ntlm_auth {
>>>> wait = yes
>>>> program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
>>>> shell_escape = yes
>>>> }
>>>> # Loaded module rlm_pap
>>>> # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
>>>> pap {
>>>> normalise = yes
>>>> }
>>>> # Loaded module rlm_passwd
>>>> # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
>>>> passwd etc_passwd {
>>>> filename = "/etc/passwd"
>>>> format = "*User-Name:Crypt-Password:"
>>>> delimiter = ":"
>>>> ignore_nislike = no
>>>> ignore_empty = yes
>>>> allow_multiple_keys = no
>>>> hash_size = 100
>>>> }
>>>> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
>>>> # Loaded module rlm_preprocess
>>>> # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess
>>>> preprocess {
>>>> huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
>>>> hints = "/etc/raddb/mods-config/preprocess/hints"
>>>> with_ascend_hack = no
>>>> ascend_channels_per_line = 23
>>>> with_ntdomain_hack = no
>>>> with_specialix_jetstream_hack = no
>>>> with_cisco_vsa_hack = no
>>>> with_alvarion_vsa_hack = no
>>>> }
>>>> reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
>>>> reading pairlist file /etc/raddb/mods-config/preprocess/hints
>>>> # Loaded module rlm_radutmp
>>>> # Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp
>>>> radutmp {
>>>> filename = "/var/log/radius/radutmp"
>>>> username = "%{User-Name}"
>>>> case_sensitive = yes
>>>> check_with_nas = yes
>>>> permissions = 384
>>>> caller_id = yes
>>>> }
>>>> # Loaded module rlm_realm
>>>> # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
>>>> realm IPASS {
>>>> format = "prefix"
>>>> delimiter = "/"
>>>> ignore_default = no
>>>> ignore_null = no
>>>> }
>>>> # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
>>>> realm suffix {
>>>> format = "suffix"
>>>> delimiter = "@"
>>>> ignore_default = no
>>>> ignore_null = no
>>>> }
>>>> # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm
>>>> realm realmpercent {
>>>> format = "suffix"
>>>> delimiter = "%"
>>>> ignore_default = no
>>>> ignore_null = no
>>>> }
>>>> # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
>>>> realm ntdomain {
>>>> format = "prefix"
>>>> delimiter = "\"
>>>> ignore_default = no
>>>> ignore_null = no
>>>> }
>>>> # Loaded module rlm_replicate
>>>> # Instantiating module "replicate" from file /etc/raddb/mods-enabled/replicate
>>>> # Loaded module rlm_soh
>>>> # Instantiating module "soh" from file /etc/raddb/mods-enabled/soh
>>>> soh {
>>>> dhcp = yes
>>>> }
>>>> # Instantiating module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
>>>> radutmp sradutmp {
>>>> filename = "/var/log/radius/sradutmp"
>>>> username = "%{User-Name}"
>>>> case_sensitive = yes
>>>> check_with_nas = yes
>>>> permissions = 420
>>>> caller_id = no
>>>> }
>>>> # Loaded module rlm_unix
>>>> # Instantiating module "unix" from file /etc/raddb/mods-enabled/unix
>>>> unix {
>>>> radwtmp = "/var/log/radius/radwtmp"
>>>> }
>>>> # Loaded module rlm_unpack
>>>> # Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack
>>>> # Loaded module rlm_utf8
>>>> # Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8
>>>> } # modules
>>>> radiusd: #### Loading Virtual Servers ####
>>>> server { # from file /etc/raddb/radiusd.conf
>>>> } # server
>>>> server default { # from file /etc/raddb/sites-enabled/default
>>>> # Creating Auth-Type = digest
>>>> # Loading authenticate {...}
>>>> # Loading authorize {...}
>>>> /etc/raddb/sites-enabled/default[372]: Failed to find "sql" in the "modules" section.
>>>> /etc/raddb/sites-enabled/default[254]: Errors parsing authorize section.
>>>> [root at pacific-technology raddb]#
>>>>
>>>>
>>>> Best Regards,
>>>> Larry
>>>> -
>>>> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>>>>
>>> -
>>> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>>
>>
>> -
>> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list