mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication
Torsten Wilms
torsten at wilms-ac.de
Thu Oct 8 16:55:35 CEST 2015
Hi @all.
Not sure if we have a bug, but i tried to get an AD authentication about
ldap more then 4 days. I read a lot of documentation and testet a lot of
stuff.
i have the following:
If i try to login via "radtest -x test testpwd 127.0.0.1:18120 0 testing123"
on the linux console, everything is working via ldap. If i try this over the
802.1X AccessPoint, it doesn't work.
If i try the same with a defined user in users like "bob Cleartext-Password
:= "hello"" over the accessPoint, it works fine.
Anything goes wrong with the password if we i use peap:
via console with domain User over inner-tunnel:
(1) Received Access-Request Id 7 from 127.0.0.1:48026 to 127.0.0.1:18120
length 74
(1) User-Name = "test"
(1) User-Password = "password"
(1) NAS-IP-Address = 192.168.8.27
(1) NAS-Port = 0
(1) Message-Authenticator = 0xc7c247ef109fb66332c18aab75068b33
(1) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel-domain
(1) authorize {
(1) [files] = noop
(1) [mschap] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "test", looking up realm NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) update control {
(1) Proxy-To-Realm := LOCAL
(1) } # update control = noop
(1) eap: No EAP-Message, not doing EAP
(1) [eap] = noop
(1) [expiration] = noop
(1) [logintime] = noop
rlm_ldap (ldap_domain): Reserved connection (0)
(1) ldap_domain: EXPAND
(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})
(1) ldap_domain: --> (sAMAccountName=test)
(1) ldap_domain: Performing search in "cn=Users,dc=domain,dc=local" with
filter "(sAMAccountName=test)", scope "sub"
(1) ldap_domain: Waiting for search result...
(1) ldap_domain: User object found at DN "CN=Test
TEST,CN=Users,DC=domain,DC=local"
(1) ldap_domain: Processing user attributes
(1) ldap_domain: WARNING: No "known good" password added. Ensure the admin
user has permission to read the password attribute
(1) ldap_domain: WARNING: PAP authentication will NOT work with Active
Directory (if that is what you were trying to configure)
rlm_ldap (ldap_domain): Released connection (0)
rlm_ldap (ldap_domain): Need 5 more connections to reach 10 spares
rlm_ldap (ldap_domain): Opening additional connection (5), 1 of 27 pending
slots used
rlm_ldap (ldap_domain): Connecting to ldap://dc.domain.local:389
rlm_ldap (ldap_domain): Waiting for bind result...
rlm_ldap (ldap_domain): Bind successful
(1) [ldap_domain] = ok
(1) if ((ok || updated) && User-Password) {
(1) if ((ok || updated) && User-Password) -> TRUE
(1) if ((ok || updated) && User-Password) {
(1) update {
(1) control:Auth-Type := LDAP
(1) } # update = noop
(1) } # if ((ok || updated) && User-Password) = noop
(1) [pap] = noop
(1) if (User-Password) {
(1) if (User-Password) -> TRUE
(1) if (User-Password) {
(1) update control {
(1) Auth-Type := LDAP
(1) } # update control = noop
(1) } # if (User-Password) = noop
(1) } # authorize = ok
(1) Found Auth-Type = LDAP
(1) # Executing group from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel-domain
(1) Auth-Type LDAP {
rlm_ldap (ldap_domain): Reserved connection (1)
(1) ldap_domain: Login attempt by "test"
(1) ldap_domain: Using user DN from request "CN=Test
TEST,CN=Users,DC=domain,DC=local"
(1) ldap_domain: Waiting for bind result...
(1) ldap_domain: Bind successful
(1) ldap_domain: Bind as user "CN=Test TEST,CN=Users,DC=domain,DC=local" was
successful
rlm_ldap (ldap_domain): Released connection (1)
(1) [ldap_domain] = ok
(1) } # Auth-Type LDAP = ok
(1) Sent Access-Accept Id 7 from 127.0.0.1:18120 to 127.0.0.1:48026 length 0
(1) Finished request
Waking up in 0.3 seconds.
(0) Cleaning up request packet ID 130 with timestamp +4
Waking up in 4.6 seconds.
(1) Cleaning up request packet ID 7 with timestamp +9
Ready to process requests
via AccessPoint with domain User:
(2) Received Access-Request Id 42 from 192.168.2.250:3072 to
192.168.8.27:1812 length 178
(2) User-Name = "test"
(2) Service-Type = Framed-User
(2) NAS-IP-Address = 192.168.2.250
(2) NAS-Port = 10
(2) NAS-Port-Id = "10"
(2) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"
(2) Calling-Station-Id = "B8-E8-56-41-2C-2A"
(2) Connect-Info = "CONNECT 54 Mbps 802.11g"
(2) NAS-Identifier = "AP-domain01"
(2) NAS-Port-Type = Wireless-802.11
(2) Framed-MTU = 1500
(2) EAP-Message = 0x020100090174657374
(2) Message-Authenticator = 0x83d8e6487c3977ae8116026c26702525
(2) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/domain
(2) authorize {
(2) [files] = noop
(2) [preprocess] = ok
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "test", looking up realm NULL
(2) suffix: No such realm "NULL"
(2) [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 1 length 9
(2) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest
of authorize
(2) [eap] = ok
(2) } # authorize = ok
(2) Found Auth-Type = EAP
(2) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain
(2) authenticate {
(2) eap: Peer sent packet with method EAP Identity (1)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Initiating new EAP-TLS session
(2) eap_peap: [eaptls start] = request
(2) eap: Sending EAP Request (code 1) ID 2 length 6
(2) eap: EAP session adding &reply:State = 0x714e61bf714c78fd
(2) [eap] = handled
(2) } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) Post-Auth-Type sub-section not found. Ignoring.
(2) Sent Access-Challenge Id 42 from 192.168.8.27:1812 to 192.168.2.250:3072
length 0
(2) EAP-Message = 0x010200061920
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0x714e61bf714c78fd13de40933f3a43c8
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 58 from 192.168.2.250:3072 to
192.168.8.27:1812 length 339
(3) User-Name = "test"
(3) Service-Type = Framed-User
(3) NAS-IP-Address = 192.168.2.250
(3) NAS-Port = 10
(3) NAS-Port-Id = "10"
(3) State = 0x714e61bf714c78fd13de40933f3a43c8
(3) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"
(3) Calling-Station-Id = "B8-E8-56-41-2C-2A"
(3) Connect-Info = "CONNECT 54 Mbps 802.11g"
(3) NAS-Identifier = "AP-domain01"
(3) NAS-Port-Type = Wireless-802.11
(3) Framed-MTU = 1500
(3) EAP-Message =
0x0202009819800000008e160301008901000085030156162f87a13e4465c695b7754a35671d
e87e37f1c9c068c51ee0c258d39cc34f00004a00ffc024c023c00ac009c008c028c027c014c0
13c012c026c025c005c004c003c02ac029c00fc00ec00d006b0067003900330016003d003c00
35002f000ac0
(3) Message-Authenticator = 0x1b3f4a72c416640c87d6f902d0effe2e
(3) session-state: No cached attributes
(3) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/domain
(3) authorize {
(3) [files] = noop
(3) [preprocess] = ok
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "test", looking up realm NULL
(3) suffix: No such realm "NULL"
(3) [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 2 length 152
(3) eap: Continuing tunnel setup
(3) [eap] = ok
(3) } # authorize = ok
(3) Found Auth-Type = EAP
(3) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain
(3) authenticate {
(3) eap: Expiring EAP session with state 0x714e61bf714c78fd
(3) eap: Finished EAP session with state 0x714e61bf714c78fd
(3) eap: Previous EAP request found for state 0x714e61bf714c78fd, released
from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer indicated complete TLS record size will be 142 bytes
(3) eap_peap: Got complete TLS record (142 bytes)
(3) eap_peap: [eaptls verify] = length included
(3) eap_peap: (other): before/accept initialization
(3) eap_peap: TLS_accept: before/accept initialization
(3) eap_peap: <<< TLS 1.0 Handshake [length 0089], ClientHello
(3) eap_peap: TLS_accept: SSLv3 read client hello A
(3) eap_peap: >>> TLS 1.0 Handshake [length 0039], ServerHello
(3) eap_peap: TLS_accept: SSLv3 write server hello A
(3) eap_peap: >>> TLS 1.0 Handshake [length 0964], Certificate
(3) eap_peap: TLS_accept: SSLv3 write certificate A
(3) eap_peap: >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange
(3) eap_peap: TLS_accept: SSLv3 write key exchange A
(3) eap_peap: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
(3) eap_peap: TLS_accept: SSLv3 write server done A
(3) eap_peap: TLS_accept: SSLv3 flush data
(3) eap_peap: TLS_accept: Need to read more data: SSLv3 read client
certificate A
(3) eap_peap: TLS_accept: Need to read more data: SSLv3 read client
certificate A
(3) eap_peap: In SSL Handshake Phase
(3) eap_peap: In SSL Accept mode
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 3 length 1004
(3) eap: EAP session adding &reply:State = 0x714e61bf704d78fd
(3) [eap] = handled
(3) } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) Post-Auth-Type sub-section not found. Ignoring.
(3) Sent Access-Challenge Id 58 from 192.168.8.27:1812 to 192.168.2.250:3072
length 0
(3) EAP-Message =
0x010303ec19c000000b00160301003902000035030194873ddf6cee275a11fcde492d5ae2b8
261f83dd50ed9063133a31be2e3d24b500c01400000dff01000100000b000403000102160301
09640b00096000095d0005a7308205a33082048ba0030201020213720000003379461d9f383b
20c900010000
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0x714e61bf704d78fd13de40933f3a43c8
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 46 from 192.168.2.250:3072 to
192.168.8.27:1812 length 193
(4) User-Name = "test"
(4) Service-Type = Framed-User
(4) NAS-IP-Address = 192.168.2.250
(4) NAS-Port = 10
(4) NAS-Port-Id = "10"
(4) State = 0x714e61bf704d78fd13de40933f3a43c8
(4) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"
(4) Calling-Station-Id = "B8-E8-56-41-2C-2A"
(4) Connect-Info = "CONNECT 54 Mbps 802.11g"
(4) NAS-Identifier = "AP-domain01"
(4) NAS-Port-Type = Wireless-802.11
(4) Framed-MTU = 1500
(4) EAP-Message = 0x020300061900
(4) Message-Authenticator = 0xe7c2576faeb3228ae2d056b77bc6cce8
(4) session-state: No cached attributes
(4) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/domain
(4) authorize {
(4) [files] = noop
(4) [preprocess] = ok
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "test", looking up realm NULL
(4) suffix: No such realm "NULL"
(4) [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 3 length 6
(4) eap: Continuing tunnel setup
(4) [eap] = ok
(4) } # authorize = ok
(4) Found Auth-Type = EAP
(4) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain
(4) authenticate {
(4) eap: Expiring EAP session with state 0x714e61bf704d78fd
(4) eap: Finished EAP session with state 0x714e61bf704d78fd
(4) eap: Previous EAP request found for state 0x714e61bf704d78fd, released
from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer ACKed our handshake fragment
(4) eap_peap: [eaptls verify] = request
(4) eap_peap: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 4 length 1000
(4) eap: EAP session adding &reply:State = 0x714e61bf734a78fd
(4) [eap] = handled
(4) } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) Post-Auth-Type sub-section not found. Ignoring.
(4) Sent Access-Challenge Id 46 from 192.168.8.27:1812 to 192.168.2.250:3072
length 0
(4) EAP-Message =
0x010403e81940b53081b206082b060105050730028681a56c6461703a2f2f2f434e3d6e6564
65636f253230476d624825323043412c434e3d4149412c434e3d5075626c69632532304b6579
25323053657276696365732c434e3d53657276696365732c434e3d436f6e6669677572617469
6f6e2c44433d
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0x714e61bf734a78fd13de40933f3a43c8
(4) Finished request
Waking up in 4.9 seconds.
(2) Cleaning up request packet ID 42 with timestamp +151
(3) Cleaning up request packet ID 58 with timestamp +151
(4) Cleaning up request packet ID 46 with timestamp +151
Ready to process requests
(5) Received Access-Request Id 216 from 192.168.2.250:3072 to
192.168.8.27:1812 length 193
(5) User-Name = "test"
(5) Service-Type = Framed-User
(5) NAS-IP-Address = 192.168.2.250
(5) NAS-Port = 10
(5) NAS-Port-Id = "10"
(5) State = 0x714e61bf734a78fd13de40933f3a43c8
(5) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"
(5) Calling-Station-Id = "B8-E8-56-41-2C-2A"
(5) Connect-Info = "CONNECT 54 Mbps 802.11g"
(5) NAS-Identifier = "AP-domain01"
(5) NAS-Port-Type = Wireless-802.11
(5) Framed-MTU = 1500
(5) EAP-Message = 0x020400061900
(5) Message-Authenticator = 0xdf4b4a18dbd046ae4568ed5b900675ca
(5) session-state: No cached attributes
(5) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/domain
(5) authorize {
(5) [files] = noop
(5) [preprocess] = ok
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "test", looking up realm NULL
(5) suffix: No such realm "NULL"
(5) [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 4 length 6
(5) eap: Continuing tunnel setup
(5) [eap] = ok
(5) } # authorize = ok
(5) Found Auth-Type = EAP
(5) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain
(5) authenticate {
(5) eap: Expiring EAP session with state 0x714e61bf734a78fd
(5) eap: Finished EAP session with state 0x714e61bf734a78fd
(5) eap: Previous EAP request found for state 0x714e61bf734a78fd, released
from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: Peer ACKed our handshake fragment
(5) eap_peap: [eaptls verify] = request
(5) eap_peap: [eaptls process] = handled
(5) eap: Sending EAP Request (code 1) ID 5 length 834
(5) eap: EAP session adding &reply:State = 0x714e61bf724b78fd
(5) [eap] = handled
(5) } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) Post-Auth-Type sub-section not found. Ignoring.
(5) Sent Access-Challenge Id 216 from 192.168.8.27:1812 to
192.168.2.250:3072 length 0
(5) EAP-Message =
0x01050342190068d99b627f3ca6561e6c1dcd0e8bb529b85d2515a36c2ba6f906ee9a223e61
9decfff2f24ef8674307735d591964d50ac988776a55970203010001a3819130818e30130609
2b060104018237140204061e0400430041300e0603551d0f0101ff040403020186300f060355
1d130101ff04
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0x714e61bf724b78fd13de40933f3a43c8
(5) Finished request
Waking up in 4.9 seconds.
(6) Received Access-Request Id 228 from 192.168.2.250:3072 to
192.168.8.27:1812 length 331
(6) User-Name = "test"
(6) Service-Type = Framed-User
(6) NAS-IP-Address = 192.168.2.250
(6) NAS-Port = 10
(6) NAS-Port-Id = "10"
(6) State = 0x714e61bf724b78fd13de40933f3a43c8
(6) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"
(6) Calling-Station-Id = "B8-E8-56-41-2C-2A"
(6) Connect-Info = "CONNECT 54 Mbps 802.11g"
(6) NAS-Identifier = "AP-domain01"
(6) NAS-Port-Type = Wireless-802.11
(6) Framed-MTU = 1500
(6) EAP-Message =
0x0205009019800000008616030100461000004241041ddb75e112e6a51620e1d90e79faf858
ba440ee51859f6f36dbb3d61474b8fc891e7a246f576a1aef8372b95f81c96af01b2ba44e938
f2dde2e5fa57032812201403010001011603010030680540b7b149e993c9f964d5e0a79cda35
934c4c8e292f
(6) Message-Authenticator = 0x96295d1faa87d10973b6fe400102f545
(6) session-state: No cached attributes
(6) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/domain
(6) authorize {
(6) [files] = noop
(6) [preprocess] = ok
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "test", looking up realm NULL
(6) suffix: No such realm "NULL"
(6) [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 5 length 144
(6) eap: Continuing tunnel setup
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = EAP
(6) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain
(6) authenticate {
(6) eap: Expiring EAP session with state 0x714e61bf724b78fd
(6) eap: Finished EAP session with state 0x714e61bf724b78fd
(6) eap: Previous EAP request found for state 0x714e61bf724b78fd, released
from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: Continuing EAP-TLS
(6) eap_peap: Peer indicated complete TLS record size will be 134 bytes
(6) eap_peap: Got complete TLS record (134 bytes)
(6) eap_peap: [eaptls verify] = length included
(6) eap_peap: <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange
(6) eap_peap: TLS_accept: SSLv3 read client key exchange A
(6) eap_peap: <<< TLS 1.0 ChangeCipherSpec length 0001 eap_peap: <<< TLS 1.0
Handshake [length 0010], Finished
(6) eap_peap: TLS_accept: SSLv3 read finished A
(6) eap_peap: >>> TLS 1.0 ChangeCipherSpec length 0001 eap_peap: TLS_accept:
SSLv3 write change cipher spec A
(6) eap_peap: >>> TLS 1.0 Handshake [length 0010], Finished
(6) eap_peap: TLS_accept: SSLv3 write finished A
(6) eap_peap: TLS_accept: SSLv3 flush data
(6) eap_peap: (other): SSL negotiation finished successfully
(6) eap_peap: SSL Connection Established
(6) eap_peap: [eaptls process] = handled
(6) eap: Sending EAP Request (code 1) ID 6 length 65
(6) eap: EAP session adding &reply:State = 0x714e61bf754878fd
(6) [eap] = handled
(6) } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) Post-Auth-Type sub-section not found. Ignoring.
(6) Sent Access-Challenge Id 228 from 192.168.8.27:1812 to
192.168.2.250:3072 length 0
(6) EAP-Message =
0x01060041190014030100010116030100301b8a91b9523361e58c472a6f4bedc223a3780b77
e80492846d5f574cd2db238cdd236645e7e78ed7e706e2dd3aecd6a2
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0x714e61bf754878fd13de40933f3a43c8
(6) Finished request
Waking up in 4.8 seconds.
(7) Received Access-Request Id 77 from 192.168.2.250:3072 to
192.168.8.27:1812 length 193
(7) User-Name = "test"
(7) Service-Type = Framed-User
(7) NAS-IP-Address = 192.168.2.250
(7) NAS-Port = 10
(7) NAS-Port-Id = "10"
(7) State = 0x714e61bf754878fd13de40933f3a43c8
(7) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"
(7) Calling-Station-Id = "B8-E8-56-41-2C-2A"
(7) Connect-Info = "CONNECT 54 Mbps 802.11g"
(7) NAS-Identifier = "AP-domain01"
(7) NAS-Port-Type = Wireless-802.11
(7) Framed-MTU = 1500
(7) EAP-Message = 0x020600061900
(7) Message-Authenticator = 0xaabe36b47f3a6a409dd2ec806970d983
(7) session-state: No cached attributes
(7) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/domain
(7) authorize {
(7) [files] = noop
(7) [preprocess] = ok
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "test", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 6 length 6
(7) eap: Continuing tunnel setup
(7) [eap] = ok
(7) } # authorize = ok
(7) Found Auth-Type = EAP
(7) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain
(7) authenticate {
(7) eap: Expiring EAP session with state 0x714e61bf754878fd
(7) eap: Finished EAP session with state 0x714e61bf754878fd
(7) eap: Previous EAP request found for state 0x714e61bf754878fd, released
from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: Continuing EAP-TLS
(7) eap_peap: Peer ACKed our handshake fragment. handshake is finished
(7) eap_peap: [eaptls verify] = success
(7) eap_peap: [eaptls process] = success
(7) eap_peap: Session established. Decoding tunneled attributes
(7) eap_peap: PEAP state TUNNEL ESTABLISHED
(7) eap: Sending EAP Request (code 1) ID 7 length 43
(7) eap: EAP session adding &reply:State = 0x714e61bf744978fd
(7) [eap] = handled
(7) } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) Post-Auth-Type sub-section not found. Ignoring.
(7) Sent Access-Challenge Id 77 from 192.168.8.27:1812 to 192.168.2.250:3072
length 0
(7) EAP-Message =
0x0107002b19001703010020a6135f04ae6dffd42c8ef419d75113ac720759219e31f74d4247
b6b610e9a071
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) State = 0x714e61bf744978fd13de40933f3a43c8
(7) Finished request
Waking up in 4.8 seconds.
(8) Received Access-Request Id 86 from 192.168.2.250:3072 to
192.168.8.27:1812 length 230
(8) User-Name = "test"
(8) Service-Type = Framed-User
(8) NAS-IP-Address = 192.168.2.250
(8) NAS-Port = 10
(8) NAS-Port-Id = "10"
(8) State = 0x714e61bf744978fd13de40933f3a43c8
(8) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"
(8) Calling-Station-Id = "B8-E8-56-41-2C-2A"
(8) Connect-Info = "CONNECT 54 Mbps 802.11g"
(8) NAS-Identifier = "AP-domain01"
(8) NAS-Port-Type = Wireless-802.11
(8) Framed-MTU = 1500
(8) EAP-Message =
0x0207002b19001703010020aa7e796b21bdc47f3c2b751c50ffbf8aaaafc3ad47a3a4a6dab8
50e706bf7227
(8) Message-Authenticator = 0xb0ef481a7beafe09a46383286750ead8
(8) session-state: No cached attributes
(8) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/domain
(8) authorize {
(8) [files] = noop
(8) [preprocess] = ok
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "test", looking up realm NULL
(8) suffix: No such realm "NULL"
(8) [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 7 length 43
(8) eap: Continuing tunnel setup
(8) [eap] = ok
(8) } # authorize = ok
(8) Found Auth-Type = EAP
(8) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain
(8) authenticate {
(8) eap: Expiring EAP session with state 0x714e61bf744978fd
(8) eap: Finished EAP session with state 0x714e61bf744978fd
(8) eap: Previous EAP request found for state 0x714e61bf744978fd, released
from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: Continuing EAP-TLS
(8) eap_peap: [eaptls verify] = ok
(8) eap_peap: Done initial handshake
(8) eap_peap: [eaptls process] = ok
(8) eap_peap: Session established. Decoding tunneled attributes
(8) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(8) eap_peap: Identity - test
(8) eap_peap: Got inner identity 'test'
(8) eap_peap: Setting default EAP type for tunneled EAP session
(8) eap_peap: Got tunneled request
(8) eap_peap: EAP-Message = 0x020700090174657374
(8) eap_peap: Setting User-Name to test
(8) eap_peap: Sending tunneled request to inner-tunnel
(8) eap_peap: EAP-Message = 0x020700090174657374
(8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(8) eap_peap: User-Name = "test"
(8) Virtual server inner-tunnel received request
(8) EAP-Message = 0x020700090174657374
(8) FreeRADIUS-Proxied-To = 127.0.0.1
(8) User-Name = "test"
(8) server inner-tunnel {
(8) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel-domain
(8) authorize {
(8) [files] = noop
(8) [mschap] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "test", looking up realm NULL
(8) suffix: No such realm "NULL"
(8) [suffix] = noop
(8) update control {
(8) Proxy-To-Realm := LOCAL
(8) } # update control = noop
(8) eap: Peer sent EAP Response (code 2) ID 7 length 9
(8) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest
of authorize
(8) [eap] = ok
(8) } # authorize = ok
(8) Found Auth-Type = EAP
(8) # Executing group from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel-domain
(8) authenticate {
(8) eap: Peer sent packet with method EAP Identity (1)
(8) eap: Calling submodule eap_mschapv2 to process data
(8) eap_mschapv2: Issuing Challenge
(8) eap: Sending EAP Request (code 1) ID 8 length 43
(8) eap: EAP session adding &reply:State = 0xbd1845cebd105fc4
(8) [eap] = handled
(8) } # authenticate = handled
(8) } # server inner-tunnel
(8) Virtual server sending reply
(8) EAP-Message =
0x0108002b1a0108002610ba684a0833e561a9e780eedf9829518f667265657261646975732d
332e302e3131
(8) Message-Authenticator = 0x00000000000000000000000000000000
(8) State = 0xbd1845cebd105fc4a22a1c51082d7ecf
(8) eap_peap: Got tunneled reply code 11
(8) eap_peap: EAP-Message =
0x0108002b1a0108002610ba684a0833e561a9e780eedf9829518f667265657261646975732d
332e302e3131
(8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap: State = 0xbd1845cebd105fc4a22a1c51082d7ecf
(8) eap_peap: Got tunneled reply RADIUS code 11
(8) eap_peap: EAP-Message =
0x0108002b1a0108002610ba684a0833e561a9e780eedf9829518f667265657261646975732d
332e302e3131
(8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap: State = 0xbd1845cebd105fc4a22a1c51082d7ecf
(8) eap_peap: Got tunneled Access-Challenge
(8) eap: Sending EAP Request (code 1) ID 8 length 75
(8) eap: EAP session adding &reply:State = 0x714e61bf774678fd
(8) [eap] = handled
(8) } # authenticate = handled
(8) Using Post-Auth-Type Challenge
(8) Post-Auth-Type sub-section not found. Ignoring.
(8) Sent Access-Challenge Id 86 from 192.168.8.27:1812 to 192.168.2.250:3072
length 0
(8) EAP-Message =
0x0108004b19001703010040c6831d9a1c5c30c64d40563c5fa21ee3cc103adbb4e99517563c
9e67d781aefdd941ba0f19bc124976046e7471792eec1d4771c20abf67b78282a152634eed5e
(8) Message-Authenticator = 0x00000000000000000000000000000000
(8) State = 0x714e61bf774678fd13de40933f3a43c8
(8) Finished request
Waking up in 4.8 seconds.
(5) Cleaning up request packet ID 216 with timestamp +181
(6) Cleaning up request packet ID 228 with timestamp +181
(7) Cleaning up request packet ID 77 with timestamp +181
(8) Cleaning up request packet ID 86 with timestamp +181
Ready to process requests
(9) Received Access-Request Id 14 from 192.168.2.250:3072 to
192.168.8.27:1812 length 278
(9) User-Name = "test"
(9) Service-Type = Framed-User
(9) NAS-IP-Address = 192.168.2.250
(9) NAS-Port = 10
(9) NAS-Port-Id = "10"
(9) State = 0x714e61bf774678fd13de40933f3a43c8
(9) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"
(9) Calling-Station-Id = "B8-E8-56-41-2C-2A"
(9) Connect-Info = "CONNECT 54 Mbps 802.11g"
(9) NAS-Identifier = "AP-domain01"
(9) NAS-Port-Type = Wireless-802.11
(9) Framed-MTU = 1500
(9) EAP-Message =
0x0208005b1900170301005041a588e579c1a63e94555d08bea2166f123e059dea3d7f8a17bc
bfd8e4f4a54c876ceee7b33a4a101a4afd0dc078e77a3c8163b76b6c9e9567e6954214f5e1ec
01cdafcd013db92c58ae136658519d20
(9) Message-Authenticator = 0xac0b3e273dede594c80988c13eaafd54
(9) session-state: No cached attributes
(9) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/domain
(9) authorize {
(9) [files] = noop
(9) [preprocess] = ok
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "test", looking up realm NULL
(9) suffix: No such realm "NULL"
(9) [suffix] = noop
(9) eap: Peer sent EAP Response (code 2) ID 8 length 91
(9) eap: Continuing tunnel setup
(9) [eap] = ok
(9) } # authorize = ok
(9) Found Auth-Type = EAP
(9) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain
(9) authenticate {
(9) eap: Expiring EAP session with state 0xbd1845cebd105fc4
(9) eap: Finished EAP session with state 0x714e61bf774678fd
(9) eap: Previous EAP request found for state 0x714e61bf774678fd, released
from the list
(9) eap: Peer sent packet with method EAP PEAP (25)
(9) eap: Calling submodule eap_peap to process data
(9) eap_peap: Continuing EAP-TLS
(9) eap_peap: [eaptls verify] = ok
(9) eap_peap: Done initial handshake
(9) eap_peap: [eaptls process] = ok
(9) eap_peap: Session established. Decoding tunneled attributes
(9) eap_peap: PEAP state phase2
(9) eap_peap: EAP method MSCHAPv2 (26)
(9) eap_peap: Got tunneled request
(9) eap_peap: EAP-Message =
0x0208003f1a0208003a316670e0343c5cde7c22158c2f3b1e05bd0000000000000000e36cbc
3c625721798db23c5fc199979df656a52246010d310074657374
(9) eap_peap: Setting User-Name to test
(9) eap_peap: Sending tunneled request to inner-tunnel
(9) eap_peap: EAP-Message =
0x0208003f1a0208003a316670e0343c5cde7c22158c2f3b1e05bd0000000000000000e36cbc
3c625721798db23c5fc199979df656a52246010d310074657374
(9) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(9) eap_peap: User-Name = "test"
(9) eap_peap: State = 0xbd1845cebd105fc4a22a1c51082d7ecf
(9) Virtual server inner-tunnel received request
(9) EAP-Message =
0x0208003f1a0208003a316670e0343c5cde7c22158c2f3b1e05bd0000000000000000e36cbc
3c625721798db23c5fc199979df656a52246010d310074657374
(9) FreeRADIUS-Proxied-To = 127.0.0.1
(9) User-Name = "test"
(9) State = 0xbd1845cebd105fc4a22a1c51082d7ecf
(9) server inner-tunnel {
(9) session-state: No cached attributes
(9) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel-domain
(9) authorize {
(9) [files] = noop
(9) [mschap] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "test", looking up realm NULL
(9) suffix: No such realm "NULL"
(9) [suffix] = noop
(9) update control {
(9) Proxy-To-Realm := LOCAL
(9) } # update control = noop
(9) eap: Peer sent EAP Response (code 2) ID 8 length 63
(9) eap: No EAP Start, assuming it's an on-going EAP conversation
(9) [eap] = updated
(9) [expiration] = noop
(9) [logintime] = noop
rlm_ldap (ldap_domain): Closing connection (2): Hit idle_timeout, was idle
for 211 seconds
rlm_ldap (ldap_domain): Closing connection (3): Hit idle_timeout, was idle
for 211 seconds
rlm_ldap (ldap_domain): Closing connection (4): Hit idle_timeout, was idle
for 211 seconds
rlm_ldap (ldap_domain): Closing connection (0): Hit idle_timeout, was idle
for 202 seconds
rlm_ldap (ldap_domain): You probably need to lower "min"
rlm_ldap (ldap_domain): Closing connection (5): Hit idle_timeout, was idle
for 202 seconds
rlm_ldap (ldap_domain): You probably need to lower "min"
rlm_ldap (ldap_domain): Closing connection (1): Hit idle_timeout, was idle
for 202 seconds
rlm_ldap (ldap_domain): You probably need to lower "min"
rlm_ldap (ldap_domain): 0 of 0 connections in use. You may need to increase
"spare"
rlm_ldap (ldap_domain): Opening additional connection (6), 1 of 32 pending
slots used
rlm_ldap (ldap_domain): Connecting to ldap://dc.domain.local:389
rlm_ldap (ldap_domain): Waiting for bind result...
rlm_ldap (ldap_domain): Bind successful
rlm_ldap (ldap_domain): Reserved connection (6)
(9) ldap_domain: EXPAND
(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})
(9) ldap_domain: --> (sAMAccountName=test)
(9) ldap_domain: Performing search in "cn=Users,dc=domain,dc=local" with
filter "(sAMAccountName=test)", scope "sub"
(9) ldap_domain: Waiting for search result...
(9) ldap_domain: User object found at DN "CN=Test
TEST,CN=Users,DC=domain,DC=local"
(9) ldap_domain: Processing user attributes
(9) ldap_domain: WARNING: No "known good" password added. Ensure the admin
user has permission to read the password attribute
(9) ldap_domain: WARNING: PAP authentication will NOT work with Active
Directory (if that is what you were trying to configure)
rlm_ldap (ldap_domain): Released connection (6)
rlm_ldap (ldap_domain): Need 2 more connections to reach 10 spares
rlm_ldap (ldap_domain): Opening additional connection (7), 1 of 31 pending
slots used
rlm_ldap (ldap_domain): Connecting to ldap://dc.domain.local:389
rlm_ldap (ldap_domain): Waiting for bind result...
rlm_ldap (ldap_domain): Bind successful
(9) [ldap_domain] = ok
(9) if ((ok || updated) && User-Password) {
(9) if ((ok || updated) && User-Password) -> FALSE
(9) [pap] = noop
(9) if (User-Password) {
(9) if (User-Password) -> FALSE
(9) } # authorize = updated
(9) Found Auth-Type = EAP
(9) # Executing group from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel-domain
(9) authenticate {
(9) eap: Expiring EAP session with state 0xbd1845cebd105fc4
(9) eap: Finished EAP session with state 0xbd1845cebd105fc4
(9) eap: Previous EAP request found for state 0xbd1845cebd105fc4, released
from the list
(9) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(9) eap: Calling submodule eap_mschapv2 to process data
(9) eap_mschapv2: # Executing group from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel-domain
(9) eap_mschapv2: Auth-Type MS-CHAP {
(9) mschap: WARNING: No Cleartext-Password configured. Cannot create
NT-Password
(9) mschap: WARNING: No Cleartext-Password configured. Cannot create
LM-Password
(9) mschap: Creating challenge hash with username: test
(9) mschap: Client is using MS-CHAPv2
(9) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication
(9) mschap: ERROR: MS-CHAP2-Response is incorrect
(9) [mschap] = reject
(9) } # Auth-Type MS-CHAP = reject
(9) eap: Sending EAP Failure (code 4) ID 8 length 4
(9) eap: Freeing handler
(9) [eap] = reject
(9) } # authenticate = reject
(9) Failed to authenticate the user
(9) Using Post-Auth-Type Reject
(9) Post-Auth-Type sub-section not found. Ignoring.
(9) } # server inner-tunnel
(9) Virtual server sending reply
(9) MS-CHAP-Error = "\010E=691 R=1 C=12a7b91273b8d4ea014f8d6353762c6f V=3
M=Authentication failed"
(9) EAP-Message = 0x04080004
(9) Message-Authenticator = 0x00000000000000000000000000000000
(9) eap_peap: Got tunneled reply code 3
(9) eap_peap: MS-CHAP-Error = "\010E=691 R=1
C=12a7b91273b8d4ea014f8d6353762c6f V=3 M=Authentication failed"
(9) eap_peap: EAP-Message = 0x04080004
(9) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(9) eap_peap: Got tunneled reply RADIUS code 3
(9) eap_peap: MS-CHAP-Error = "\010E=691 R=1
C=12a7b91273b8d4ea014f8d6353762c6f V=3 M=Authentication failed"
(9) eap_peap: EAP-Message = 0x04080004
(9) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(9) eap_peap: Tunneled authentication was rejected
(9) eap_peap: FAILURE
(9) eap: Sending EAP Request (code 1) ID 9 length 43
(9) eap: EAP session adding &reply:State = 0x714e61bf764778fd
(9) [eap] = handled
(9) } # authenticate = handled
(9) Using Post-Auth-Type Challenge
(9) Post-Auth-Type sub-section not found. Ignoring.
(9) Sent Access-Challenge Id 14 from 192.168.8.27:1812 to 192.168.2.250:3072
length 0
(9) EAP-Message =
0x0109002b19001703010020b8c28870cb31e457ad24447c2dad4915f836138d395b9e74200f
e48a71906242
(9) Message-Authenticator = 0x00000000000000000000000000000000
(9) State = 0x714e61bf764778fd13de40933f3a43c8
(9) Finished request
Waking up in 4.9 seconds.
(10) Received Access-Request Id 10 from 192.168.2.250:3072 to
192.168.8.27:1812 length 230
(10) User-Name = "test"
(10) Service-Type = Framed-User
(10) NAS-IP-Address = 192.168.2.250
(10) NAS-Port = 10
(10) NAS-Port-Id = "10"
(10) State = 0x714e61bf764778fd13de40933f3a43c8
(10) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"
(10) Calling-Station-Id = "B8-E8-56-41-2C-2A"
(10) Connect-Info = "CONNECT 54 Mbps 802.11g"
(10) NAS-Identifier = "AP-domain01"
(10) NAS-Port-Type = Wireless-802.11
(10) Framed-MTU = 1500
(10) EAP-Message =
0x0209002b190017030100209f64c67a9a32761683b0d21eb6f28bfb8a42fa0a50d6ef3dfbf3
815d7511e4a1
(10) Message-Authenticator = 0x26f3267a7372bfa1b0f71a27ccba5c9f
(10) session-state: No cached attributes
(10) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/domain
(10) authorize {
(10) [files] = noop
(10) [preprocess] = ok
(10) suffix: Checking for suffix after "@"
(10) suffix: No '@' in User-Name = "test", looking up realm NULL
(10) suffix: No such realm "NULL"
(10) [suffix] = noop
(10) eap: Peer sent EAP Response (code 2) ID 9 length 43
(10) eap: Continuing tunnel setup
(10) [eap] = ok
(10) } # authorize = ok
(10) Found Auth-Type = EAP
(10) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain
(10) authenticate {
(10) eap: Expiring EAP session with state 0x714e61bf764778fd
(10) eap: Finished EAP session with state 0x714e61bf764778fd
(10) eap: Previous EAP request found for state 0x714e61bf764778fd, released
from the list
(10) eap: Peer sent packet with method EAP PEAP (25)
(10) eap: Calling submodule eap_peap to process data
(10) eap_peap: Continuing EAP-TLS
(10) eap_peap: [eaptls verify] = ok
(10) eap_peap: Done initial handshake
(10) eap_peap: [eaptls process] = ok
(10) eap_peap: Session established. Decoding tunneled attributes
(10) eap_peap: PEAP state send tlv failure
(10) eap_peap: Received EAP-TLV response
(10) eap_peap: The users session was previously rejected: returning reject
(again.)
(10) eap_peap: This means you need to read the PREVIOUS messages in the
debug output
(10) eap_peap: to find out the reason why the user was rejected
(10) eap_peap: Look for "reject" or "fail". Those earlier messages will tell
you
(10) eap_peap: what went wrong, and how to fix the problem
(10) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module
failed
(10) eap: Sending EAP Failure (code 4) ID 9 length 4
(10) eap: Failed in EAP select
(10) [eap] = invalid
(10) } # authenticate = invalid
(10) Failed to authenticate the user
(10) Using Post-Auth-Type Reject
(10) Post-Auth-Type sub-section not found. Ignoring.
(10) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(10) Sending delayed response
(10) Sent Access-Reject Id 10 from 192.168.8.27:1812 to 192.168.2.250:3072
length 44
(10) EAP-Message = 0x04090004
(10) Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.9 seconds.
(9) Cleaning up request packet ID 14 with timestamp +211
(10) Cleaning up request packet ID 10 with timestamp +211
Ready to process requests
default site:
server default {
listen {
type = auth
ipaddr = *
port = 0
# clients = per_socket_clients
limit {
max_connections = 0
lifetime = 0
idle_timeout = 30
}
}
listen {
ipaddr = *
port = 0
type = acct
# interface = eth0
# clients = per_socket_clients
limit {
idle_timeout = 0
lifetime = 0
max_connections = 0
}
}
authorize {
files
preprocess
suffix
eap {
ok = return
}
expiration
logintime
}
authenticate {
eap
}
preacct {
}
accounting {
detail
sql_domain
}
session {
radutmp
sql_domain
}
post-auth {
}
pre-proxy {
}
post-proxy {
}
}
inner-tunnel site:
server inner-tunnel {
listen {
ipaddr = 127.0.0.1
port = 18120
type = auth
}
authorize {
files
mschap
suffix
update control {
Proxy-To-Realm := LOCAL
}
eap {
ok = return
}
expiration
logintime
ldap_domain
if ((ok || updated) && User-Password) {
update {
control:Auth-Type := ldap
}
}
pap
if (User-Password) {
update control {
Auth-Type := ldap
}
}
}
authenticate {
Auth-Type PAP {
#ldap_domain
pap
}
Auth-Type CHAP {
chap
}
Auth-Type MS-CHAP {
mschap
}
Auth-Type LDAP {
ldap_domain
}
ldap_domain
eap
}
session {
radutmp
}
post-auth {
}
pre-proxy {
}
post-proxy {
}
}
eap configuration:
eap {
default_eap_type = peap
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = ${max_requests}
md5 {
}
leap {
}
gtc {
auth_type = PAP
}
tls-config tls-common {
private_key_password = whatever
private_key_file = ${certdir}/nedeco/aaa.nedeco.local.key
certificate_file = ${certdir}/nedeco/aaa.nedeco.local.pem
ca_file = ${cadir}/nedeco/nedeco_CA.pem
dh_file = ${certdir}/dh
random_file = /dev/urandom
ca_path = ${cadir}
cipher_list = "DEFAULT"
ecdh_curve = "prime256v1"
cache {
enable = no
lifetime = 24 # hours
max_entries = 255
}
verify {
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
}
}
tls {
tls = tls-common
}
ttls {
}
peap {
tls = tls-common
default_eap_type = mschapv2
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = no
virtual_server = "inner-tunnel"
}
mschapv2 {
}
}
the chap configuration:
chap {
# no configuration
}
the mschap configuration
mschap {
use_mppe = yes
require_encryption = yes
require_strong = yes
with_ntdomain_hack = yes
pool {
start = ${thread[pool].start_servers}
min = ${thread[pool].min_spare_servers}
max = ${thread[pool].max_servers}
spare = ${thread[pool].max_spare_servers}
uses = 0
retry_delay = 30
lifetime = 86400
cleanup_interval = 300
idle_timeout = 600
}
passchange {
}
retry_msg = "Re-enter (or reset) the password"
}
ldap configuration:
ldap ldap_domain {
server = 'dc.domain.local'
port = 389
identity = 'cn=Administrator,cn=Users,dc=domain,dc=local'
password = password
base_dn = 'cn=Users,dc=domain,dc=local'
sasl {
realm = 'domain.local'
}
update {
control:Password-With-Header += 'userPassword'
control:NT-Password := 'ntPassword'
control: += 'radiusControlAttribute'
request: += 'radiusRequestAttribute'
reply: += 'radiusReplyAttribute'
}
edir_autz = yes
user {
base_dn = "${..base_dn}"
filter = "(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})"
sasl {
}
scope = 'sub'
}
group {
base_dn = "${..base_dn}"
filter = '(objectClass=posixGroup)'
membership_attribute = 'memberOf'
}
profile {
}
client {
base_dn = "${..base_dn}"
filter = '(objectClass=radiusClient)'
}
attribute {
ipaddr = 'radiusClientIdentifier'
secret = 'radiusClientSecret'
}
}
accounting {
reference = "%{tolower:type.%{Acct-Status-Type}}"
type {
start {
update {
description := "Online at %S"
}
}
interim-update {
update {
description := "Last seen at %S"
}
}
stop {
update {
description := "Offline at %S"
}
}
}
}
post-auth {
update {
description := "Authenticated at %S"
}
}
options {
chase_referrals = yes
rebind = yes
res_timeout = 10
srv_timelimit = 3
net_timeout = 1
idle = 60
probes = 3
interval = 3
ldap_debug = 0x0028
}
tls {
start_tls = yes
require_cert = 'never'
}
pool {
start = ${thread[pool].start_servers}
min = ${thread[pool].min_spare_servers}
max = ${thread[pool].max_servers}
spare = ${thread[pool].max_spare_servers}
uses = 0
retry_delay = 30
lifetime = 0
idle_timeout = 60
}
}
radius Version: radiusd: FreeRADIUS Version 3.0.11 (git #7a659a2), for host
x86_64-unknown-linux-gnu, built on Oct 7 2015 at 15:23:07
with user bob over console:
(0) Received Access-Request Id 213 from 127.0.0.1:45282 to 127.0.0.1:18120
length 73
(0) User-Name = "bob"
(0) User-Password = "hello"
(0) NAS-IP-Address = 192.168.8.27
(0) NAS-Port = 0
(0) Message-Authenticator = 0xbed4902174d4f8ff5f36492af1ae51de
(0) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel-domain
(0) authorize {
(0) files: users: Matched entry bob at line 69
(0) [files] = ok
(0) [mschap] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "bob", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) update control {
(0) Proxy-To-Realm := LOCAL
(0) } # update control = noop
(0) eap: No EAP-Message, not doing EAP
(0) [eap] = noop
(0) [expiration] = noop
(0) [logintime] = noop
rlm_ldap (ldap_domain): Reserved connection (0)
(0) ldap_domain: EXPAND
(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})
(0) ldap_domain: --> (sAMAccountName=bob)
(0) ldap_domain: Performing search in "cn=Users,dc=domain,dc=local" with
filter "(sAMAccountName=bob)", scope "sub"
(0) ldap_domain: Waiting for search result...
(0) ldap_domain: Search returned no results
rlm_ldap (ldap_domain): Released connection (0)
rlm_ldap (ldap_domain): Need 5 more connections to reach 10 spares
rlm_ldap (ldap_domain): Opening additional connection (5), 1 of 27 pending
slots used
rlm_ldap (ldap_domain): Connecting to ldap://dc.domain.local:389
rlm_ldap (ldap_domain): Waiting for bind result...
rlm_ldap (ldap_domain): Bind successful
(0) [ldap_domain] = notfound
(0) if ((ok || updated) && User-Password) {
(0) if ((ok || updated) && User-Password) -> FALSE
(0) [pap] = updated
(0) if (User-Password) {
(0) if (User-Password) -> TRUE
(0) if (User-Password) {
(0) update control {
(0) Auth-Type := LDAP
(0) } # update control = noop
(0) } # if (User-Password) = noop
(0) } # authorize = updated
(0) Found Auth-Type = LDAP
(0) # Executing group from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel-domain
(0) Auth-Type LDAP {
rlm_ldap (ldap_domain): Reserved connection (1)
(0) ldap_domain: Login attempt by "bob"
(0) ldap_domain: EXPAND
(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})
(0) ldap_domain: --> (sAMAccountName=bob)
(0) ldap_domain: Performing search in "cn=Users,dc=domain,dc=local" with
filter "(sAMAccountName=bob)", scope "sub"
(0) ldap_domain: Waiting for search result...
(0) ldap_domain: Search returned no results
rlm_ldap (ldap_domain): Released connection (1)
(0) [ldap_domain] = notfound
(0) } # Auth-Type LDAP = notfound
(0) Failed to authenticate the user
(0) Using Post-Auth-Type Reject
(0) Post-Auth-Type sub-section not found. Ignoring.
(0) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(0) Sending delayed response
(0) Sent Access-Reject Id 213 from 127.0.0.1:18120 to 127.0.0.1:45282 length
20
Waking up in 3.9 seconds.
(0) Cleaning up request packet ID 213 with timestamp +5
Ready to process requests
with user bob over AccessPoint:
(1) Received Access-Request Id 155 from 192.168.2.250:3072 to
192.168.8.27:1812 length 176
(1) User-Name = "bob"
(1) Service-Type = Framed-User
(1) NAS-IP-Address = 192.168.2.250
(1) NAS-Port = 10
(1) NAS-Port-Id = "10"
(1) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"
(1) Calling-Station-Id = "B8-E8-56-41-2C-2A"
(1) Connect-Info = "CONNECT 54 Mbps 802.11g"
(1) NAS-Identifier = "AP-domain01"
(1) NAS-Port-Type = Wireless-802.11
(1) Framed-MTU = 1500
(1) EAP-Message = 0x0201000801626f62
(1) Message-Authenticator = 0x4680895a204b3df7d15d82558ff9e6ea
(1) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/domain
(1) authorize {
(1) files: users: Matched entry bob at line 69
(1) [files] = ok
(1) [preprocess] = ok
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "bob", looking up realm NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 1 length 8
(1) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest
of authorize
(1) [eap] = ok
(1) } # authorize = ok
(1) Found Auth-Type = EAP
(1) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain
(1) authenticate {
(1) eap: Peer sent packet with method EAP Identity (1)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: Initiating new EAP-TLS session
(1) eap_peap: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 2 length 6
(1) eap: EAP session adding &reply:State = 0x7322fa167320e364
(1) [eap] = handled
(1) } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) Post-Auth-Type sub-section not found. Ignoring.
(1) Sent Access-Challenge Id 155 from 192.168.8.27:1812 to
192.168.2.250:3072 length 0
(1) EAP-Message = 0x010200061920
(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0x7322fa167320e3641bb25e163c98a49d
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 219 from 192.168.2.250:3072 to
192.168.8.27:1812 length 338
(2) User-Name = "bob"
(2) Service-Type = Framed-User
(2) NAS-IP-Address = 192.168.2.250
(2) NAS-Port = 10
(2) NAS-Port-Id = "10"
(2) State = 0x7322fa167320e3641bb25e163c98a49d
(2) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"
(2) Calling-Station-Id = "B8-E8-56-41-2C-2A"
(2) Connect-Info = "CONNECT 54 Mbps 802.11g"
(2) NAS-Identifier = "AP-domain01"
(2) NAS-Port-Type = Wireless-802.11
(2) Framed-MTU = 1500
(2) EAP-Message =
0x0202009819800000008e1603010089010000850301561634f097408b8f9058fa38f1f34ce4
854696e71aebecb3ae3cd9850b14d4cc00004a00ffc024c023c00ac009c008c028c027c014c0
13c012c026c025c005c004c003c02ac029c00fc00ec00d006b0067003900330016003d003c00
35002f000ac0
(2) Message-Authenticator = 0x5309b752e9ed063e669ba97b7c937db8
(2) session-state: No cached attributes
(2) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/domain
(2) authorize {
(2) files: users: Matched entry bob at line 69
(2) [files] = ok
(2) [preprocess] = ok
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "bob", looking up realm NULL
(2) suffix: No such realm "NULL"
(2) [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 2 length 152
(2) eap: Continuing tunnel setup
(2) [eap] = ok
(2) } # authorize = ok
(2) Found Auth-Type = EAP
(2) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain
(2) authenticate {
(2) eap: Expiring EAP session with state 0x7322fa167320e364
(2) eap: Finished EAP session with state 0x7322fa167320e364
(2) eap: Previous EAP request found for state 0x7322fa167320e364, released
from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Continuing EAP-TLS
(2) eap_peap: Peer indicated complete TLS record size will be 142 bytes
(2) eap_peap: Got complete TLS record (142 bytes)
(2) eap_peap: [eaptls verify] = length included
(2) eap_peap: (other): before/accept initialization
(2) eap_peap: TLS_accept: before/accept initialization
(2) eap_peap: <<< TLS 1.0 Handshake [length 0089], ClientHello
(2) eap_peap: TLS_accept: SSLv3 read client hello A
(2) eap_peap: >>> TLS 1.0 Handshake [length 0039], ServerHello
(2) eap_peap: TLS_accept: SSLv3 write server hello A
(2) eap_peap: >>> TLS 1.0 Handshake [length 0964], Certificate
(2) eap_peap: TLS_accept: SSLv3 write certificate A
(2) eap_peap: >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange
(2) eap_peap: TLS_accept: SSLv3 write key exchange A
(2) eap_peap: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
(2) eap_peap: TLS_accept: SSLv3 write server done A
(2) eap_peap: TLS_accept: SSLv3 flush data
(2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client
certificate A
(2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client
certificate A
(2) eap_peap: In SSL Handshake Phase
(2) eap_peap: In SSL Accept mode
(2) eap_peap: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 3 length 1004
(2) eap: EAP session adding &reply:State = 0x7322fa167221e364
(2) [eap] = handled
(2) } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) Post-Auth-Type sub-section not found. Ignoring.
(2) Sent Access-Challenge Id 219 from 192.168.8.27:1812 to
192.168.2.250:3072 length 0
(2) EAP-Message =
0x010303ec19c000000b001603010039020000350301da2dfe903d7c37a7634c8742deb0c9de
5ef2b5d7f4c0d4d8d1697deec243cc5600c01400000dff01000100000b000403000102160301
09640b00096000095d0005a7308205a33082048ba0030201020213720000003379461d9f383b
20c900010000
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0x7322fa167221e3641bb25e163c98a49d
(2) Finished request
Waking up in 4.9 seconds.
(1) Cleaning up request packet ID 155 with timestamp +61
(2) Cleaning up request packet ID 219 with timestamp +61
Ready to process requests
(3) Received Access-Request Id 54 from 192.168.2.250:3072 to
192.168.8.27:1812 length 192
(3) User-Name = "bob"
(3) Service-Type = Framed-User
(3) NAS-IP-Address = 192.168.2.250
(3) NAS-Port = 10
(3) NAS-Port-Id = "10"
(3) State = 0x7322fa167221e3641bb25e163c98a49d
(3) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"
(3) Calling-Station-Id = "B8-E8-56-41-2C-2A"
(3) Connect-Info = "CONNECT 54 Mbps 802.11g"
(3) NAS-Identifier = "AP-domain01"
(3) NAS-Port-Type = Wireless-802.11
(3) Framed-MTU = 1500
(3) EAP-Message = 0x020300061900
(3) Message-Authenticator = 0xa70b8b8371dc21e4a3352e99bad8a487
(3) session-state: No cached attributes
(3) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/domain
(3) authorize {
(3) files: users: Matched entry bob at line 69
(3) [files] = ok
(3) [preprocess] = ok
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "bob", looking up realm NULL
(3) suffix: No such realm "NULL"
(3) [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 3 length 6
(3) eap: Continuing tunnel setup
(3) [eap] = ok
(3) } # authorize = ok
(3) Found Auth-Type = EAP
(3) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain
(3) authenticate {
(3) eap: Expiring EAP session with state 0x7322fa167221e364
(3) eap: Finished EAP session with state 0x7322fa167221e364
(3) eap: Previous EAP request found for state 0x7322fa167221e364, released
from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer ACKed our handshake fragment
(3) eap_peap: [eaptls verify] = request
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 4 length 1000
(3) eap: EAP session adding &reply:State = 0x7322fa167126e364
(3) [eap] = handled
(3) } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) Post-Auth-Type sub-section not found. Ignoring.
(3) Sent Access-Challenge Id 54 from 192.168.8.27:1812 to 192.168.2.250:3072
length 0
(3) EAP-Message =
0x010403e81940b53081b206082b060105050730028681a56c6461703a2f2f2f434e3d6e6564
65636f253230476d624825323043412c434e3d4149412c434e3d5075626c69632532304b6579
25323053657276696365732c434e3d53657276696365732c434e3d436f6e6669677572617469
6f6e2c44433d
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0x7322fa167126e3641bb25e163c98a49d
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 29 from 192.168.2.250:3072 to
192.168.8.27:1812 length 192
(4) User-Name = "bob"
(4) Service-Type = Framed-User
(4) NAS-IP-Address = 192.168.2.250
(4) NAS-Port = 10
(4) NAS-Port-Id = "10"
(4) State = 0x7322fa167126e3641bb25e163c98a49d
(4) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"
(4) Calling-Station-Id = "B8-E8-56-41-2C-2A"
(4) Connect-Info = "CONNECT 54 Mbps 802.11g"
(4) NAS-Identifier = "AP-domain01"
(4) NAS-Port-Type = Wireless-802.11
(4) Framed-MTU = 1500
(4) EAP-Message = 0x020400061900
(4) Message-Authenticator = 0x841ce2c1c9b797b25c3aff5bba5e059d
(4) session-state: No cached attributes
(4) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/domain
(4) authorize {
(4) files: users: Matched entry bob at line 69
(4) [files] = ok
(4) [preprocess] = ok
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "bob", looking up realm NULL
(4) suffix: No such realm "NULL"
(4) [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 4 length 6
(4) eap: Continuing tunnel setup
(4) [eap] = ok
(4) } # authorize = ok
(4) Found Auth-Type = EAP
(4) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain
(4) authenticate {
(4) eap: Expiring EAP session with state 0x7322fa167126e364
(4) eap: Finished EAP session with state 0x7322fa167126e364
(4) eap: Previous EAP request found for state 0x7322fa167126e364, released
from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer ACKed our handshake fragment
(4) eap_peap: [eaptls verify] = request
(4) eap_peap: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 5 length 834
(4) eap: EAP session adding &reply:State = 0x7322fa167027e364
(4) [eap] = handled
(4) } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) Post-Auth-Type sub-section not found. Ignoring.
(4) Sent Access-Challenge Id 29 from 192.168.8.27:1812 to 192.168.2.250:3072
length 0
(4) EAP-Message =
0x01050342190068d99b627f3ca6561e6c1dcd0e8bb529b85d2515a36c2ba6f906ee9a223e61
9decfff2f24ef8674307735d591964d50ac988776a55970203010001a3819130818e30130609
2b060104018237140204061e0400430041300e0603551d0f0101ff040403020186300f060355
1d130101ff04
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0x7322fa167027e3641bb25e163c98a49d
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 215 from 192.168.2.250:3072 to
192.168.8.27:1812 length 330
(5) User-Name = "bob"
(5) Service-Type = Framed-User
(5) NAS-IP-Address = 192.168.2.250
(5) NAS-Port = 10
(5) NAS-Port-Id = "10"
(5) State = 0x7322fa167027e3641bb25e163c98a49d
(5) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"
(5) Calling-Station-Id = "B8-E8-56-41-2C-2A"
(5) Connect-Info = "CONNECT 54 Mbps 802.11g"
(5) NAS-Identifier = "AP-domain01"
(5) NAS-Port-Type = Wireless-802.11
(5) Framed-MTU = 1500
(5) EAP-Message =
0x0205009019800000008616030100461000004241048075a5ca05d012d0fd77b0f9e1664c5c
e577eda72a1368e0a8e78fd9072b0a6e04ce9f7f3cb1339ca9fd58bdc40e0afce833807f1c40
35e532e91d07e8d45fdb1403010001011603010030bff39ef9cf9a0400269ae5fd8888ba5c49
40b72599bca5
(5) Message-Authenticator = 0xfaa49416d762fdf0846428951f176829
(5) session-state: No cached attributes
(5) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/domain
(5) authorize {
(5) files: users: Matched entry bob at line 69
(5) [files] = ok
(5) [preprocess] = ok
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "bob", looking up realm NULL
(5) suffix: No such realm "NULL"
(5) [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 5 length 144
(5) eap: Continuing tunnel setup
(5) [eap] = ok
(5) } # authorize = ok
(5) Found Auth-Type = EAP
(5) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain
(5) authenticate {
(5) eap: Expiring EAP session with state 0x7322fa167027e364
(5) eap: Finished EAP session with state 0x7322fa167027e364
(5) eap: Previous EAP request found for state 0x7322fa167027e364, released
from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: Peer indicated complete TLS record size will be 134 bytes
(5) eap_peap: Got complete TLS record (134 bytes)
(5) eap_peap: [eaptls verify] = length included
(5) eap_peap: <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange
(5) eap_peap: TLS_accept: SSLv3 read client key exchange A
(5) eap_peap: <<< TLS 1.0 ChangeCipherSpec length 0001 eap_peap: <<< TLS 1.0
Handshake [length 0010], Finished
(5) eap_peap: TLS_accept: SSLv3 read finished A
(5) eap_peap: >>> TLS 1.0 ChangeCipherSpec length 0001 eap_peap: TLS_accept:
SSLv3 write change cipher spec A
(5) eap_peap: >>> TLS 1.0 Handshake [length 0010], Finished
(5) eap_peap: TLS_accept: SSLv3 write finished A
(5) eap_peap: TLS_accept: SSLv3 flush data
(5) eap_peap: (other): SSL negotiation finished successfully
(5) eap_peap: SSL Connection Established
(5) eap_peap: [eaptls process] = handled
(5) eap: Sending EAP Request (code 1) ID 6 length 65
(5) eap: EAP session adding &reply:State = 0x7322fa167724e364
(5) [eap] = handled
(5) } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) Post-Auth-Type sub-section not found. Ignoring.
(5) Sent Access-Challenge Id 215 from 192.168.8.27:1812 to
192.168.2.250:3072 length 0
(5) EAP-Message =
0x010600411900140301000101160301003055bf61e75ec8b42df54cc0a1eab6dd5e274dd8db
872c3a18e2616a373eda384dcffbfa8de45423ccb8890ee689f1f4cb
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0x7322fa167724e3641bb25e163c98a49d
(5) Finished request
Waking up in 4.8 seconds.
(6) Received Access-Request Id 116 from 192.168.2.250:3072 to
192.168.8.27:1812 length 192
(6) User-Name = "bob"
(6) Service-Type = Framed-User
(6) NAS-IP-Address = 192.168.2.250
(6) NAS-Port = 10
(6) NAS-Port-Id = "10"
(6) State = 0x7322fa167724e3641bb25e163c98a49d
(6) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"
(6) Calling-Station-Id = "B8-E8-56-41-2C-2A"
(6) Connect-Info = "CONNECT 54 Mbps 802.11g"
(6) NAS-Identifier = "AP-domain01"
(6) NAS-Port-Type = Wireless-802.11
(6) Framed-MTU = 1500
(6) EAP-Message = 0x020600061900
(6) Message-Authenticator = 0xb468a031e9e011addea02301e58313cb
(6) session-state: No cached attributes
(6) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/domain
(6) authorize {
(6) files: users: Matched entry bob at line 69
(6) [files] = ok
(6) [preprocess] = ok
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "bob", looking up realm NULL
(6) suffix: No such realm "NULL"
(6) [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 6 length 6
(6) eap: Continuing tunnel setup
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = EAP
(6) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain
(6) authenticate {
(6) eap: Expiring EAP session with state 0x7322fa167724e364
(6) eap: Finished EAP session with state 0x7322fa167724e364
(6) eap: Previous EAP request found for state 0x7322fa167724e364, released
from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: Continuing EAP-TLS
(6) eap_peap: Peer ACKed our handshake fragment. handshake is finished
(6) eap_peap: [eaptls verify] = success
(6) eap_peap: [eaptls process] = success
(6) eap_peap: Session established. Decoding tunneled attributes
(6) eap_peap: PEAP state TUNNEL ESTABLISHED
(6) eap: Sending EAP Request (code 1) ID 7 length 43
(6) eap: EAP session adding &reply:State = 0x7322fa167625e364
(6) [eap] = handled
(6) } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) Post-Auth-Type sub-section not found. Ignoring.
(6) Sent Access-Challenge Id 116 from 192.168.8.27:1812 to
192.168.2.250:3072 length 0
(6) EAP-Message =
0x0107002b19001703010020ba0b3d2b7d949cf1727c708a6c6ac8606201ef325b4408284fbf
4115ccf1e60c
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0x7322fa167625e3641bb25e163c98a49d
(6) Finished request
Waking up in 4.8 seconds.
(7) Received Access-Request Id 108 from 192.168.2.250:3072 to
192.168.8.27:1812 length 229
(7) User-Name = "bob"
(7) Service-Type = Framed-User
(7) NAS-IP-Address = 192.168.2.250
(7) NAS-Port = 10
(7) NAS-Port-Id = "10"
(7) State = 0x7322fa167625e3641bb25e163c98a49d
(7) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"
(7) Calling-Station-Id = "B8-E8-56-41-2C-2A"
(7) Connect-Info = "CONNECT 54 Mbps 802.11g"
(7) NAS-Identifier = "AP-domain01"
(7) NAS-Port-Type = Wireless-802.11
(7) Framed-MTU = 1500
(7) EAP-Message =
0x0207002b190017030100205db45e564856f45f7af7cc0f3ec2e54ef3aab9a99f6cb2d9944b
2c53980f0bde
(7) Message-Authenticator = 0xd2092e590023b1e9af89a2d5f9927801
(7) session-state: No cached attributes
(7) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/domain
(7) authorize {
(7) files: users: Matched entry bob at line 69
(7) [files] = ok
(7) [preprocess] = ok
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "bob", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 7 length 43
(7) eap: Continuing tunnel setup
(7) [eap] = ok
(7) } # authorize = ok
(7) Found Auth-Type = EAP
(7) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain
(7) authenticate {
(7) eap: Expiring EAP session with state 0x7322fa167625e364
(7) eap: Finished EAP session with state 0x7322fa167625e364
(7) eap: Previous EAP request found for state 0x7322fa167625e364, released
from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: Continuing EAP-TLS
(7) eap_peap: [eaptls verify] = ok
(7) eap_peap: Done initial handshake
(7) eap_peap: [eaptls process] = ok
(7) eap_peap: Session established. Decoding tunneled attributes
(7) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(7) eap_peap: Identity - bob
(7) eap_peap: Got inner identity 'bob'
(7) eap_peap: Setting default EAP type for tunneled EAP session
(7) eap_peap: Got tunneled request
(7) eap_peap: EAP-Message = 0x0207000801626f62
(7) eap_peap: Setting User-Name to bob
(7) eap_peap: Sending tunneled request to inner-tunnel
(7) eap_peap: EAP-Message = 0x0207000801626f62
(7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_peap: User-Name = "bob"
(7) Virtual server inner-tunnel received request
(7) EAP-Message = 0x0207000801626f62
(7) FreeRADIUS-Proxied-To = 127.0.0.1
(7) User-Name = "bob"
(7) server inner-tunnel {
(7) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel-domain
(7) authorize {
(7) files: users: Matched entry bob at line 69
(7) [files] = ok
(7) [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "bob", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) update control {
(7) Proxy-To-Realm := LOCAL
(7) } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 7 length 8
(7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest
of authorize
(7) [eap] = ok
(7) } # authorize = ok
(7) Found Auth-Type = EAP
(7) # Executing group from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel-domain
(7) authenticate {
(7) eap: Peer sent packet with method EAP Identity (1)
(7) eap: Calling submodule eap_mschapv2 to process data
(7) eap_mschapv2: Issuing Challenge
(7) eap: Sending EAP Request (code 1) ID 8 length 43
(7) eap: EAP session adding &reply:State = 0xa0773c37a07f2697
(7) [eap] = handled
(7) } # authenticate = handled
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7) EAP-Message =
0x0108002b1a0108002610499c5c634fd1c53afcf63e2a20dc0dbd667265657261646975732d
332e302e3131
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) State = 0xa0773c37a07f269794c91e639bc0d99c
(7) eap_peap: Got tunneled reply code 11
(7) eap_peap: EAP-Message =
0x0108002b1a0108002610499c5c634fd1c53afcf63e2a20dc0dbd667265657261646975732d
332e302e3131
(7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: State = 0xa0773c37a07f269794c91e639bc0d99c
(7) eap_peap: Got tunneled reply RADIUS code 11
(7) eap_peap: EAP-Message =
0x0108002b1a0108002610499c5c634fd1c53afcf63e2a20dc0dbd667265657261646975732d
332e302e3131
(7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: State = 0xa0773c37a07f269794c91e639bc0d99c
(7) eap_peap: Got tunneled Access-Challenge
(7) eap: Sending EAP Request (code 1) ID 8 length 75
(7) eap: EAP session adding &reply:State = 0x7322fa16752ae364
(7) [eap] = handled
(7) } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) Post-Auth-Type sub-section not found. Ignoring.
(7) Sent Access-Challenge Id 108 from 192.168.8.27:1812 to
192.168.2.250:3072 length 0
(7) EAP-Message =
0x0108004b19001703010040d8e4f8be725dc18720efdaf547282b5b876c26c5fdbea8c05f38
0bf87ea452cdf6938d2793528a14f784d70ad64f66ebcb6998cae0cdb2ec340b208caf7adddc
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) State = 0x7322fa16752ae3641bb25e163c98a49d
(7) Finished request
Waking up in 4.8 seconds.
(8) Received Access-Request Id 50 from 192.168.2.250:3072 to
192.168.8.27:1812 length 277
(8) User-Name = "bob"
(8) Service-Type = Framed-User
(8) NAS-IP-Address = 192.168.2.250
(8) NAS-Port = 10
(8) NAS-Port-Id = "10"
(8) State = 0x7322fa16752ae3641bb25e163c98a49d
(8) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"
(8) Calling-Station-Id = "B8-E8-56-41-2C-2A"
(8) Connect-Info = "CONNECT 54 Mbps 802.11g"
(8) NAS-Identifier = "AP-domain01"
(8) NAS-Port-Type = Wireless-802.11
(8) Framed-MTU = 1500
(8) EAP-Message =
0x0208005b1900170301005035d828d77a9cd3611fc5b79937ff5a2749a2d013a332137a52fe
3a206717cde550258b9914956f0b2f88dd7f4491d6d52e7b97a1fd99e59010b7e346d7692d76
8748d8d8efb3995a7d8d58863b0e3c9f
(8) Message-Authenticator = 0x27a3860baf38d3fd1d0e7f85c85a398e
(8) session-state: No cached attributes
(8) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/domain
(8) authorize {
(8) files: users: Matched entry bob at line 69
(8) [files] = ok
(8) [preprocess] = ok
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "bob", looking up realm NULL
(8) suffix: No such realm "NULL"
(8) [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 8 length 91
(8) eap: Continuing tunnel setup
(8) [eap] = ok
(8) } # authorize = ok
(8) Found Auth-Type = EAP
(8) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain
(8) authenticate {
(8) eap: Expiring EAP session with state 0xa0773c37a07f2697
(8) eap: Finished EAP session with state 0x7322fa16752ae364
(8) eap: Previous EAP request found for state 0x7322fa16752ae364, released
from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: Continuing EAP-TLS
(8) eap_peap: [eaptls verify] = ok
(8) eap_peap: Done initial handshake
(8) eap_peap: [eaptls process] = ok
(8) eap_peap: Session established. Decoding tunneled attributes
(8) eap_peap: PEAP state phase2
(8) eap_peap: EAP method MSCHAPv2 (26)
(8) eap_peap: Got tunneled request
(8) eap_peap: EAP-Message =
0x0208003e1a02080039318c4c5187cb6d3acc25374e1a666c6ebd00000000000000005c626c
4605277cd81e771f53707290714956dfed703aa31a00626f62
(8) eap_peap: Setting User-Name to bob
(8) eap_peap: Sending tunneled request to inner-tunnel
(8) eap_peap: EAP-Message =
0x0208003e1a02080039318c4c5187cb6d3acc25374e1a666c6ebd00000000000000005c626c
4605277cd81e771f53707290714956dfed703aa31a00626f62
(8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(8) eap_peap: User-Name = "bob"
(8) eap_peap: State = 0xa0773c37a07f269794c91e639bc0d99c
(8) Virtual server inner-tunnel received request
(8) EAP-Message =
0x0208003e1a02080039318c4c5187cb6d3acc25374e1a666c6ebd00000000000000005c626c
4605277cd81e771f53707290714956dfed703aa31a00626f62
(8) FreeRADIUS-Proxied-To = 127.0.0.1
(8) User-Name = "bob"
(8) State = 0xa0773c37a07f269794c91e639bc0d99c
(8) server inner-tunnel {
(8) session-state: No cached attributes
(8) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel-domain
(8) authorize {
(8) files: users: Matched entry bob at line 69
(8) [files] = ok
(8) [mschap] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "bob", looking up realm NULL
(8) suffix: No such realm "NULL"
(8) [suffix] = noop
(8) update control {
(8) Proxy-To-Realm := LOCAL
(8) } # update control = noop
(8) eap: Peer sent EAP Response (code 2) ID 8 length 62
(8) eap: No EAP Start, assuming it's an on-going EAP conversation
(8) [eap] = updated
(8) [expiration] = noop
(8) [logintime] = noop
rlm_ldap (ldap_domain): Closing connection (2): Hit idle_timeout, was idle
for 90 seconds
rlm_ldap (ldap_domain): Closing connection (3): Hit idle_timeout, was idle
for 90 seconds
rlm_ldap (ldap_domain): Closing connection (4): Hit idle_timeout, was idle
for 90 seconds
rlm_ldap (ldap_domain): Closing connection (0): Hit idle_timeout, was idle
for 85 seconds
rlm_ldap (ldap_domain): You probably need to lower "min"
rlm_ldap (ldap_domain): Closing connection (5): Hit idle_timeout, was idle
for 85 seconds
rlm_ldap (ldap_domain): You probably need to lower "min"
rlm_ldap (ldap_domain): Closing connection (1): Hit idle_timeout, was idle
for 85 seconds
rlm_ldap (ldap_domain): You probably need to lower "min"
rlm_ldap (ldap_domain): 0 of 0 connections in use. You may need to increase
"spare"
rlm_ldap (ldap_domain): Opening additional connection (6), 1 of 32 pending
slots used
rlm_ldap (ldap_domain): Connecting to ldap://dc.domain.local:389
rlm_ldap (ldap_domain): Waiting for bind result...
rlm_ldap (ldap_domain): Bind successful
rlm_ldap (ldap_domain): Reserved connection (6)
(8) ldap_domain: EXPAND
(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})
(8) ldap_domain: --> (sAMAccountName=bob)
(8) ldap_domain: Performing search in "cn=Users,dc=domain,dc=local" with
filter "(sAMAccountName=bob)", scope "sub"
(8) ldap_domain: Waiting for search result...
(8) ldap_domain: Search returned no results
rlm_ldap (ldap_domain): Released connection (6)
rlm_ldap (ldap_domain): Need 2 more connections to reach 10 spares
rlm_ldap (ldap_domain): Opening additional connection (7), 1 of 31 pending
slots used
rlm_ldap (ldap_domain): Connecting to ldap://dc.domain.local:389
rlm_ldap (ldap_domain): Waiting for bind result...
rlm_ldap (ldap_domain): Bind successful
(8) [ldap_domain] = notfound
(8) if ((ok || updated) && User-Password) {
(8) if ((ok || updated) && User-Password) -> FALSE
(8) pap: WARNING: Auth-Type already set. Not setting to PAP
(8) [pap] = noop
(8) if (User-Password) {
(8) if (User-Password) -> FALSE
(8) } # authorize = updated
(8) Found Auth-Type = EAP
(8) # Executing group from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel-domain
(8) authenticate {
(8) eap: Expiring EAP session with state 0xa0773c37a07f2697
(8) eap: Finished EAP session with state 0xa0773c37a07f2697
(8) eap: Previous EAP request found for state 0xa0773c37a07f2697, released
from the list
(8) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(8) eap: Calling submodule eap_mschapv2 to process data
(8) eap_mschapv2: # Executing group from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel-domain
(8) eap_mschapv2: Auth-Type MS-CHAP {
(8) mschap: Found Cleartext-Password, hashing to create NT-Password
(8) mschap: Found Cleartext-Password, hashing to create LM-Password
(8) mschap: Creating challenge hash with username: bob
(8) mschap: Client is using MS-CHAPv2
(8) mschap: Adding MS-CHAPv2 MPPE keys
(8) [mschap] = ok
(8) } # Auth-Type MS-CHAP = ok
(8) MSCHAP Success
(8) eap: Sending EAP Request (code 1) ID 9 length 51
(8) eap: EAP session adding &reply:State = 0xa0773c37a17e2697
(8) [eap] = handled
(8) } # authenticate = handled
(8) } # server inner-tunnel
(8) Virtual server sending reply
(8) EAP-Message =
0x010900331a0308002e533d4130303731353232344432383732443943443233443736334535
4535313444393146323441424646
(8) Message-Authenticator = 0x00000000000000000000000000000000
(8) State = 0xa0773c37a17e269794c91e639bc0d99c
(8) eap_peap: Got tunneled reply code 11
(8) eap_peap: EAP-Message =
0x010900331a0308002e533d4130303731353232344432383732443943443233443736334535
4535313444393146323441424646
(8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap: State = 0xa0773c37a17e269794c91e639bc0d99c
(8) eap_peap: Got tunneled reply RADIUS code 11
(8) eap_peap: EAP-Message =
0x010900331a0308002e533d4130303731353232344432383732443943443233443736334535
4535313444393146323441424646
(8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap: State = 0xa0773c37a17e269794c91e639bc0d99c
(8) eap_peap: Got tunneled Access-Challenge
(8) eap: Sending EAP Request (code 1) ID 9 length 91
(8) eap: EAP session adding &reply:State = 0x7322fa16742be364
(8) [eap] = handled
(8) } # authenticate = handled
(8) Using Post-Auth-Type Challenge
(8) Post-Auth-Type sub-section not found. Ignoring.
(8) Sent Access-Challenge Id 50 from 192.168.8.27:1812 to 192.168.2.250:3072
length 0
(8) EAP-Message =
0x0109005b19001703010050859ea345fa5ac6b144a9e42ed8bff28f0b2320a237ac8370d029
cb70f52d482a0d76da88b813e4df36252cb6397300ec8d8d78b8622e934b5283b40ee5a8abe7
5b64b6667666fd21f0cac5fcc60f98ed
(8) Message-Authenticator = 0x00000000000000000000000000000000
(8) State = 0x7322fa16742be3641bb25e163c98a49d
(8) Finished request
Waking up in 4.7 seconds.
(9) Received Access-Request Id 168 from 192.168.2.250:3072 to
192.168.8.27:1812 length 229
(9) User-Name = "bob"
(9) Service-Type = Framed-User
(9) NAS-IP-Address = 192.168.2.250
(9) NAS-Port = 10
(9) NAS-Port-Id = "10"
(9) State = 0x7322fa16742be3641bb25e163c98a49d
(9) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"
(9) Calling-Station-Id = "B8-E8-56-41-2C-2A"
(9) Connect-Info = "CONNECT 54 Mbps 802.11g"
(9) NAS-Identifier = "AP-domain01"
(9) NAS-Port-Type = Wireless-802.11
(9) Framed-MTU = 1500
(9) EAP-Message =
0x0209002b19001703010020ef0b01a2e1a2ce59b84fcd3a36f6101ad280a2da6de9e3034ee1
142fd2c2d87b
(9) Message-Authenticator = 0xcbef8a5238f2450a86714781617cb91e
(9) session-state: No cached attributes
(9) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/domain
(9) authorize {
(9) files: users: Matched entry bob at line 69
(9) [files] = ok
(9) [preprocess] = ok
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "bob", looking up realm NULL
(9) suffix: No such realm "NULL"
(9) [suffix] = noop
(9) eap: Peer sent EAP Response (code 2) ID 9 length 43
(9) eap: Continuing tunnel setup
(9) [eap] = ok
(9) } # authorize = ok
(9) Found Auth-Type = EAP
(9) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain
(9) authenticate {
(9) eap: Expiring EAP session with state 0xa0773c37a17e2697
(9) eap: Finished EAP session with state 0x7322fa16742be364
(9) eap: Previous EAP request found for state 0x7322fa16742be364, released
from the list
(9) eap: Peer sent packet with method EAP PEAP (25)
(9) eap: Calling submodule eap_peap to process data
(9) eap_peap: Continuing EAP-TLS
(9) eap_peap: [eaptls verify] = ok
(9) eap_peap: Done initial handshake
(9) eap_peap: [eaptls process] = ok
(9) eap_peap: Session established. Decoding tunneled attributes
(9) eap_peap: PEAP state phase2
(9) eap_peap: EAP method MSCHAPv2 (26)
(9) eap_peap: Got tunneled request
(9) eap_peap: EAP-Message = 0x020900061a03
(9) eap_peap: Setting User-Name to bob
(9) eap_peap: Sending tunneled request to inner-tunnel
(9) eap_peap: EAP-Message = 0x020900061a03
(9) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(9) eap_peap: User-Name = "bob"
(9) eap_peap: State = 0xa0773c37a17e269794c91e639bc0d99c
(9) Virtual server inner-tunnel received request
(9) EAP-Message = 0x020900061a03
(9) FreeRADIUS-Proxied-To = 127.0.0.1
(9) User-Name = "bob"
(9) State = 0xa0773c37a17e269794c91e639bc0d99c
(9) server inner-tunnel {
(9) session-state: No cached attributes
(9) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel-domain
(9) authorize {
(9) files: users: Matched entry bob at line 69
(9) [files] = ok
(9) [mschap] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "bob", looking up realm NULL
(9) suffix: No such realm "NULL"
(9) [suffix] = noop
(9) update control {
(9) Proxy-To-Realm := LOCAL
(9) } # update control = noop
(9) eap: Peer sent EAP Response (code 2) ID 9 length 6
(9) eap: No EAP Start, assuming it's an on-going EAP conversation
(9) [eap] = updated
(9) [expiration] = noop
(9) [logintime] = noop
rlm_ldap (ldap_domain): Reserved connection (6)
(9) ldap_domain: EXPAND
(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})
(9) ldap_domain: --> (sAMAccountName=bob)
(9) ldap_domain: Performing search in "cn=Users,dc=domain,dc=local" with
filter "(sAMAccountName=bob)", scope "sub"
(9) ldap_domain: Waiting for search result...
(9) ldap_domain: Search returned no results
rlm_ldap (ldap_domain): Released connection (6)
(9) [ldap_domain] = notfound
(9) if ((ok || updated) && User-Password) {
(9) if ((ok || updated) && User-Password) -> FALSE
(9) pap: WARNING: Auth-Type already set. Not setting to PAP
(9) [pap] = noop
(9) if (User-Password) {
(9) if (User-Password) -> FALSE
(9) } # authorize = updated
(9) Found Auth-Type = EAP
(9) # Executing group from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel-domain
(9) authenticate {
(9) eap: Expiring EAP session with state 0xa0773c37a17e2697
(9) eap: Finished EAP session with state 0xa0773c37a17e2697
(9) eap: Previous EAP request found for state 0xa0773c37a17e2697, released
from the list
(9) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(9) eap: Calling submodule eap_mschapv2 to process data
(9) eap: Sending EAP Success (code 3) ID 9 length 4
(9) eap: Freeing handler
(9) [eap] = ok
(9) } # authenticate = ok
(9) } # server inner-tunnel
(9) Virtual server sending reply
(9) MS-MPPE-Encryption-Policy = Encryption-Required
(9) MS-MPPE-Encryption-Types = 4
(9) MS-MPPE-Send-Key = 0xc40f7d178a19b383691a863644016790
(9) MS-MPPE-Recv-Key = 0x1f490d8645a1a87f762bc38738f37149
(9) EAP-Message = 0x03090004
(9) Message-Authenticator = 0x00000000000000000000000000000000
(9) User-Name = "bob"
(9) eap_peap: Got tunneled reply code 2
(9) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Required
(9) eap_peap: MS-MPPE-Encryption-Types = 4
(9) eap_peap: MS-MPPE-Send-Key = 0xc40f7d178a19b383691a863644016790
(9) eap_peap: MS-MPPE-Recv-Key = 0x1f490d8645a1a87f762bc38738f37149
(9) eap_peap: EAP-Message = 0x03090004
(9) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(9) eap_peap: User-Name = "bob"
(9) eap_peap: Got tunneled reply RADIUS code 2
(9) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Required
(9) eap_peap: MS-MPPE-Encryption-Types = 4
(9) eap_peap: MS-MPPE-Send-Key = 0xc40f7d178a19b383691a863644016790
(9) eap_peap: MS-MPPE-Recv-Key = 0x1f490d8645a1a87f762bc38738f37149
(9) eap_peap: EAP-Message = 0x03090004
(9) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(9) eap_peap: User-Name = "bob"
(9) eap_peap: Tunneled authentication was successful
(9) eap_peap: SUCCESS
(9) eap: Sending EAP Request (code 1) ID 10 length 43
(9) eap: EAP session adding &reply:State = 0x7322fa167b28e364
(9) [eap] = handled
(9) } # authenticate = handled
(9) Using Post-Auth-Type Challenge
(9) Post-Auth-Type sub-section not found. Ignoring.
(9) Sent Access-Challenge Id 168 from 192.168.8.27:1812 to
192.168.2.250:3072 length 0
(9) EAP-Message =
0x010a002b190017030100209ebe5c178129e763273f16ddd56f3f5e123f6a27587c42e7e480
f2874b2985ac
(9) Message-Authenticator = 0x00000000000000000000000000000000
(9) State = 0x7322fa167b28e3641bb25e163c98a49d
(9) Finished request
Waking up in 4.7 seconds.
(10) Received Access-Request Id 89 from 192.168.2.250:3072 to
192.168.8.27:1812 length 229
(10) User-Name = "bob"
(10) Service-Type = Framed-User
(10) NAS-IP-Address = 192.168.2.250
(10) NAS-Port = 10
(10) NAS-Port-Id = "10"
(10) State = 0x7322fa167b28e3641bb25e163c98a49d
(10) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"
(10) Calling-Station-Id = "B8-E8-56-41-2C-2A"
(10) Connect-Info = "CONNECT 54 Mbps 802.11g"
(10) NAS-Identifier = "AP-domain01"
(10) NAS-Port-Type = Wireless-802.11
(10) Framed-MTU = 1500
(10) EAP-Message =
0x020a002b19001703010020ae6a94676019ad167b393353926209ead29be3185de748899304
ff6a50957c1a
(10) Message-Authenticator = 0x64a847e3ae161cf68eccda80a2f11f16
(10) session-state: No cached attributes
(10) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/domain
(10) authorize {
(10) files: users: Matched entry bob at line 69
(10) [files] = ok
(10) [preprocess] = ok
(10) suffix: Checking for suffix after "@"
(10) suffix: No '@' in User-Name = "bob", looking up realm NULL
(10) suffix: No such realm "NULL"
(10) [suffix] = noop
(10) eap: Peer sent EAP Response (code 2) ID 10 length 43
(10) eap: Continuing tunnel setup
(10) [eap] = ok
(10) } # authorize = ok
(10) Found Auth-Type = EAP
(10) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain
(10) authenticate {
(10) eap: Expiring EAP session with state 0x7322fa167b28e364
(10) eap: Finished EAP session with state 0x7322fa167b28e364
(10) eap: Previous EAP request found for state 0x7322fa167b28e364, released
from the list
(10) eap: Peer sent packet with method EAP PEAP (25)
(10) eap: Calling submodule eap_peap to process data
(10) eap_peap: Continuing EAP-TLS
(10) eap_peap: [eaptls verify] = ok
(10) eap_peap: Done initial handshake
(10) eap_peap: [eaptls process] = ok
(10) eap_peap: Session established. Decoding tunneled attributes
(10) eap_peap: PEAP state send tlv success
(10) eap_peap: Received EAP-TLV response
(10) eap_peap: Success
(10) eap: Sending EAP Success (code 3) ID 10 length 4
(10) eap: Freeing handler
(10) [eap] = ok
(10) } # authenticate = ok
(10) Sent Access-Accept Id 89 from 192.168.8.27:1812 to 192.168.2.250:3072
length 0
(10) MS-MPPE-Recv-Key =
0xa16bc44cb5331571c4f3d362fd38e1bb11a2670822b415e53eb7ebbc67c2cb93
(10) MS-MPPE-Send-Key =
0xbd2081385181a9a51170b7fa40bfd3b32e396b6e7d46f9b5369a38d64be27cc8
(10) EAP-Message = 0x030a0004
(10) Message-Authenticator = 0x00000000000000000000000000000000
(10) User-Name = "bob"
(10) Finished request
Waking up in 4.7 seconds.
(3) Cleaning up request packet ID 54 with timestamp +90
(4) Cleaning up request packet ID 29 with timestamp +90
Waking up in 0.1 seconds.
(5) Cleaning up request packet ID 215 with timestamp +90
(6) Cleaning up request packet ID 116 with timestamp +90
(7) Cleaning up request packet ID 108 with timestamp +90
(8) Cleaning up request packet ID 50 with timestamp +90
(9) Cleaning up request packet ID 168 with timestamp +90
(10) Cleaning up request packet ID 89 with timestamp +90
Ready to process requests
I think that everything goes wrong with encrypt/decrypt the Domain User
password or no User-Password is given after eap or something else. I tried a
lot of stuff, but nothing works.
users configuration
bob Cleartext-Password := "hello"
DEFAULT Framed-Protocol == PPP
Framed-Protocol = PPP,
Framed-Compression = Van-Jacobson-TCP-IP
DEFAULT Hint == "CSLIP"
Framed-Protocol = SLIP,
Framed-Compression = Van-Jacobson-TCP-IP
DEFAULT Hint == "SLIP"
Framed-Protocol = SLIP
Messages:
(7) ldap_nedeco: Processing user attributes
(7) ldap_nedeco: WARNING: No "known good" password added. Ensure the admin
user has permission to read the password attribute
(7) ldap_nedeco: WARNING: PAP authentication will NOT work with Active
Directory (if that is what you were trying to configure)
rlm_ldap (ldap_nedeco): Released connection (0)
..
(7) mschap: WARNING: No Cleartext-Password configured. Cannot create
NT-Password
(7) mschap: WARNING: No Cleartext-Password configured. Cannot create
LM-Password
(7) mschap: Creating challenge hash with username: test
(7) mschap: Client is using MS-CHAPv2
(7) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication
(7) mschap: ERROR: MS-CHAP2-Response is incorrect
..
(8) eap_peap: Received EAP-TLV response
(8) eap_peap: The users session was previously rejected: returning reject
(again.)
(8) eap_peap: This means you need to read the PREVIOUS messages in the debug
output
(8) eap_peap: to find out the reason why the user was rejected
(8) eap_peap: Look for "reject" or "fail". Those earlier messages will tell
you
(8) eap_peap: what went wrong, and how to fix the problem
(8) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module
failed
..
Any Idea?
More information about the Freeradius-Users
mailing list