EAP-FAST Support

Wegener, Norbert norbert.wegener at atos.net
Wed Sep 9 16:41:42 CEST 2015

A Cisco guy told me, EAP-FAST is required when  a Cisco AP shall be used with   NEAT.
Maybe this is not true and someone here knows it better?
Norbert Wegener

-----Original Message-----
From: Freeradius-Users [mailto:freeradius-users-bounces+norbert.wegener=atos.net at lists.freeradius.org] On Behalf Of Alan DeKok
Sent: Wednesday, September 09, 2015 3:31 PM
To: FreeRadius users mailing list
Subject: Re: EAP-FAST Support

On Sep 9, 2015, at 8:30 AM, Wegener, Norbert <norbert.wegener at atos.net> wrote:
> EAP-FAST seems not being widely used.

  It's used in Cisco deployments.  By people who buy ACS.  Or ISE.  Or whatever they call it these days.

> The latest thread on this topic that  I found is:
> http://lists.freeradius.org/pipermail/freeradius-users/2014-September/
> 073588.html
> There it is mentioned, that:
> rlm_eap2 was removed from v3.0.x so if you're building 3.0.0 the 
> module won't be available.
> As EAP-FAST could be used with the experimental rlm_eap2 :
> Does this mean, Freeradius 3.x does not support EAP FAST?

  It doesn't support EAP-FAST.  The code probably isn't hard to write.  I've had some old (and bad) code sitting around for a while:

$ ls ../avenda/modules/freeradius-114/src/modules/rlm_eap/types/rlm_eap_fast/
Makefile.in			configure.in			eap_fast_keys.c

  The code is *terrible* tho.  I didn't have time to go fix it.

  Alan DeKok.

List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

More information about the Freeradius-Users mailing list