Unexpected termination signal
Scott McLane Gardner
sgardne at uark.edu
Thu Aug 18 20:37:52 CEST 2016
FreeRadius version 3.0.4 installed from rhel repos.
RedHat Enterprise Linux 7.2
OpenSSL 1.0.1e-fips 11 Feb 2013
When I run radiusd -X from the command line, it runs as expected without issue. If I run radiusd as a service, I get the following messages in my radius.log after about a minute of working normally:
> Thu Aug 18 18:23:41 2016 : Info: rlm_ldap (ldap): 0 of 3 connections in use. Need more spares
> Thu Aug 18 18:23:41 2016 : Info: rlm_ldap (ldap): Opening additional connection (7)
> Thu Aug 18 18:24:25 2016 : Info: Signalled to terminate
> Thu Aug 18 18:24:25 2016 : Info: Exiting normally
I have been searching the list and banging my head on this all day, so please forgive me if I have overlooked the previously posted solution. My radiusd -X output is below, although I'm not sure how helpful it will be since it runs normally under that circumstance.
radiusd: FreeRADIUS Version 3.0.4, for host x86_64-redhat-linux-gnu, built on Dec 28 2014 at 07:00:16
Copyright (C) 1999-2014 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/ldap
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/operator-name
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
security {
user = "radiusd"
group = "radiusd"
allow_core_dumps = no
}
}
main {
name = "redrad01"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/redrad01"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/redrad01/redrad01.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = no
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
radiusd: #### Loading Clients ####
client red8510.fake.com {
ipaddr = 10.250.0.19
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "cisco"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 0
}
}
client blue8510.fake.com {
ipaddr = 10.250.0.18
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "cisco"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 0
}
}
client 127.0.0.1 {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 0
}
}
radiusd: #### Instantiating modules ####
instantiate {
}
modules {
# Loaded module rlm_always
# Instantiating module "reject" from file /etc/raddb/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Instantiating module "fail" from file /etc/raddb/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Instantiating module "ok" from file /etc/raddb/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Instantiating module "handled" from file /etc/raddb/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Instantiating module "noop" from file /etc/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Instantiating module "updated" from file /etc/raddb/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_attr_filter
# Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/raddb/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
# Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
# Loaded module rlm_cache
# Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
cache cache_eap {
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 16384
epoch = 0
add_stats = no
}
# Loaded module rlm_chap
# Instantiating module "chap" from file /etc/raddb/mods-enabled/chap
# Loaded module rlm_detail
# Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
detail {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log
detail auth_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
# Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log
detail reply_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
detail pre_proxy_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
detail post_proxy_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Loaded module rlm_dhcp
# Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp
# Loaded module rlm_digest
# Instantiating module "digest" from file /etc/raddb/mods-enabled/digest
# Loaded module rlm_dynamic_clients
# Instantiating module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients
# Loaded module rlm_eap
# Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
eap {
default_eap_type = "peap"
timer_expire = 60
ignore_unknown_eap_types = no
mod_accounting_username_bug = no
max_sessions = 1024
}
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
ca_path = "/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/etc/raddb/certs/redrad01.fake.com.key"
certificate_file = "/etc/raddb/certs/redrad01.fake.com.cer"
ca_file = "/etc/raddb/certs/ca.pem"
dh_file = "/etc/raddb/certs/dh"
random_file = "/dev/urandom"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
ecdh_curve = "prime256v1"
cache {
enable = yes
lifetime = 24
max_entries = 255
}
verify {
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = yes
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_method = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Loaded module rlm_exec
# Instantiating module "echo" from file /etc/raddb/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Instantiating module "exec" from file /etc/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_expiration
# Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration
# Loaded module rlm_expr
# Instantiating module "expr" from file /etc/raddb/mods-enabled/expr
expr {
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
# Loaded module rlm_files
# Instantiating module "files" from file /etc/raddb/mods-enabled/files
files {
filename = "/etc/raddb/mods-config/files/authorize"
usersfile = "/etc/raddb/mods-config/files/authorize"
acctusersfile = "/etc/raddb/mods-config/files/accounting"
preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
compat = "cistron"
}
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
# Loaded module rlm_linelog
# Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
linelog {
filename = "/var/log/radius/linelog"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{Packet-Type}:-default}"
}
# Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/radius/linelog-accounting"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_logintime
# Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_mschap
# Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
ntlm_auth = "/bin/ntlm_auth --request-nt-key --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}"
passchange {
}
allow_retry = yes
}
# Instantiating module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_pap
# Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_passwd
# Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Loaded module rlm_preprocess
# Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
hints = "/etc/raddb/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
# Loaded module rlm_radutmp
# Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_realm
# Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_replicate
# Instantiating module "replicate" from file /etc/raddb/mods-enabled/replicate
# Loaded module rlm_soh
# Instantiating module "soh" from file /etc/raddb/mods-enabled/soh
soh {
dhcp = yes
}
# Instantiating module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/radius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_unix
# Instantiating module "unix" from file /etc/raddb/mods-enabled/unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
# Loaded module rlm_unpack
# Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack
# Loaded module rlm_utf8
# Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8
# Loaded module rlm_ldap
# Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap
ldap {
server = "ds.fake.com"
port = 636
password = <<< secret >>>
identity = "netoc at fake.com"
user {
filter = "(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})"
scope = "sub"
base_dn = "dc=fake,dc=com"
access_positive = yes
}
group {
filter = "(objectClass=posixGroup)"
scope = "sub"
base_dn = "dc=fake,dc=com"
name_attribute = "cn"
membership_attribute = "memberOf"
cacheable_name = no
cacheable_dn = no
}
client {
filter = "(objectClass=frClient)"
scope = "sub"
base_dn = "dc=fake,dc=com"
attribute {
identifier = "radiusClientIdentifier"
shortname = "cn"
secret = "radiusClientSecret"
}
}
profile {
filter = "(&)"
}
options {
ldap_debug = 40
chase_referrals = yes
rebind = yes
net_timeout = 1
res_timeout = 20
srv_timelimit = 20
idle = 60
probes = 3
interval = 3
}
tls {
start_tls = no
require_cert = "never"
}
}
rlm_ldap: Falling back to build time libldap version info. Query for LDAP_OPT_API_INFO returned: -1
rlm_ldap: libldap vendor: OpenLDAP version: 20439
accounting {
reference = "%{tolower:type.%{Acct-Status-Type}}"
}
post-auth {
reference = "."
}
rlm_ldap (ldap): Initialising connection pool
pool {
start = 5
min = 4
max = 32
spare = 3
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 0
retry_delay = 1
spread = no
}
rlm_ldap (ldap): Opening additional connection (0)
rlm_ldap (ldap): Connecting to ds.fake.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1)
rlm_ldap (ldap): Connecting to ds.fake.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2)
rlm_ldap (ldap): Connecting to ds.fake.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3)
rlm_ldap (ldap): Connecting to ds.fake.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4)
rlm_ldap (ldap): Connecting to ds.fake.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
# Creating Auth-Type = digest
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
# Loading preacct {...}
# Loading accounting {...}
# Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
# Loading session {...}
# Loading post-auth {...}
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 1812
limit {
max_connections = 16
lifetime = 0
idle_timeout = 0
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on auth address * port 1812 as server default
Listening on acct address * port 1813 as server default
Listening on auth address :: port 1812 as server default
Listening on acct address :: port 1813 as server default
Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel
Ready to process requests
More information about the Freeradius-Users
mailing list