Device can't get access
Koenraad Lelong
radius01 at de-brouwerij.be
Sun Jan 24 14:03:51 CET 2016
Hi,
I'm trying to configure a Lantronix Matchport bg Pro to access my
wireless network. I seem unable to configure it to give it access, and I
don't find why.
My freeradius (3.0.10) can authenticate laptops and smartphones, it's
only the device that gives problems, so I think I'm doing something
wrong on the device.
Below is my debug log for the device.
I think in section (5) is my problem :
(5) eap_peap: ERROR: SSL says: error:1412E152:SSL
routines:SSL_PARSE_CLIENTHELLO_TLSEXT:unsafe legacy renegotiation disabled
Is it possible to enable SSLv3 (temporarily), so I can see if that
really is the problem ?
Thanks,
Koenraad.
-------------- next part --------------
Copyright (C) 1999-2015 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/dictionary
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/mods-enabled/
including configuration file /etc/freeradius/mods-enabled/expr
including configuration file /etc/freeradius/mods-enabled/expiration
including configuration file /etc/freeradius/mods-enabled/detail.log
including configuration file /etc/freeradius/mods-enabled/soh
including configuration file /etc/freeradius/mods-enabled/files
including configuration file /etc/freeradius/mods-enabled/echo
including configuration file /etc/freeradius/mods-enabled/replicate
including configuration file /etc/freeradius/mods-enabled/digest
including configuration file /etc/freeradius/mods-enabled/mschap
including configuration file /etc/freeradius/mods-enabled/detail
including configuration file /etc/freeradius/mods-enabled/pap
including configuration file /etc/freeradius/mods-enabled/unix
including configuration file /etc/freeradius/mods-enabled/passwd
including configuration file /etc/freeradius/mods-enabled/preprocess
including configuration file /etc/freeradius/mods-enabled/linelog
including configuration file /etc/freeradius/mods-enabled/unpack
including configuration file /etc/freeradius/mods-enabled/sradutmp
including configuration file /etc/freeradius/mods-enabled/always
including configuration file /etc/freeradius/mods-enabled/utf8
including configuration file /etc/freeradius/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/mods-enabled/exec
including configuration file /etc/freeradius/mods-enabled/realm
including configuration file /etc/freeradius/mods-enabled/chap
including configuration file /etc/freeradius/mods-enabled/cache_eap
including configuration file /etc/freeradius/mods-enabled/logintime
including configuration file /etc/freeradius/mods-enabled/attr_filter
including configuration file /etc/freeradius/mods-enabled/radutmp
including configuration file /etc/freeradius/mods-enabled/sql
including configuration file /etc/freeradius/mods-config/sql/main/mysql/queries.conf
including configuration file /etc/freeradius/mods-enabled/eap
including files in directory /etc/freeradius/policy.d/
including configuration file /etc/freeradius/policy.d/debug
including configuration file /etc/freeradius/policy.d/abfab-tr
including configuration file /etc/freeradius/policy.d/operator-name
including configuration file /etc/freeradius/policy.d/filter
including configuration file /etc/freeradius/policy.d/control
including configuration file /etc/freeradius/policy.d/dhcp
including configuration file /etc/freeradius/policy.d/canonicalization
including configuration file /etc/freeradius/policy.d/accounting
including configuration file /etc/freeradius/policy.d/cui
including configuration file /etc/freeradius/policy.d/eap
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/default
main {
security {
allow_core_dumps = no
}
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/radiusd"
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = yes
auth_badpass = yes
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client DIR-825 {
ipaddr = 192.168.185.14
require_message_authenticator = no
secret = <<< secret >>>
shortname = "DIR-825"
nas_type = "other"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client laptop {
ipaddr = 192.168.185.66
require_message_authenticator = no
secret = <<< secret >>>
shortname = "laptop"
nas_type = "other"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client dwl-2100ap {
ipaddr = 192.168.185.8
require_message_authenticator = no
secret = <<< secret >>>
shortname = "dwl-2100ap"
nas_type = "other"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
# Creating Auth-Type = digest
radiusd: #### Instantiating modules ####
# Loaded module rlm_expr
# Loading module "expr" from file /etc/freeradius/mods-enabled/expr
expr {
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_expiration
# Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration
# Loaded module rlm_detail
# Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
detail auth_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
detail reply_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
detail pre_proxy_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
detail post_proxy_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_soh
# Loading module "soh" from file /etc/freeradius/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_files
# Loading module "files" from file /etc/freeradius/mods-enabled/files
files {
filename = "/etc/freeradius/mods-config/files/authorize"
acctusersfile = "/etc/freeradius/mods-config/files/accounting"
preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
}
# Loaded module rlm_exec
# Loading module "echo" from file /etc/freeradius/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loaded module rlm_replicate
# Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate
# Loaded module rlm_digest
# Loading module "digest" from file /etc/freeradius/mods-enabled/digest
# Loaded module rlm_mschap
# Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
}
# Loading module "detail" from file /etc/freeradius/mods-enabled/detail
detail {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_pap
# Loading module "pap" from file /etc/freeradius/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/freeradius/mods-enabled/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
hints = "/etc/freeradius/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_linelog
# Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog
linelog {
filename = "/var/log/freeradius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/freeradius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_unpack
# Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
# Loaded module rlm_radutmp
# Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/freeradius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_always
# Loading module "reject" from file /etc/freeradius/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/freeradius/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/freeradius/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/freeradius/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/freeradius/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/freeradius/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/freeradius/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/freeradius/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/freeradius/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
# Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients
# Loading module "exec" from file /etc/freeradius/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/freeradius/mods-enabled/chap
# Loaded module rlm_cache
# Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_logintime
# Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/freeradius/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/freeradius/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_sql
# Loading module "sql" from file /etc/freeradius/mods-enabled/sql
sql {
driver = "rlm_sql_mysql"
server = "192.168.185.3"
port = 3306
login = "radius2"
password = <<< secret >>>
radius_db = "radius"
read_groups = yes
read_profiles = yes
read_clients = no
delete_stale_sessions = yes
sql_user_name = "%{User-Name}"
default_user_profile = ""
client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority"
simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
accounting {
reference = "%{tolower:type.%{Acct-Status-Type}.query}"
type {
accounting-on {
query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
}
accounting-off {
query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
}
start {
query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')"
}
interim-update {
query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
}
stop {
query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
}
}
}
post-auth {
reference = ".query"
query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')"
}
}
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
Creating attribute SQL-Group
# Loaded module rlm_eap
# Loading module "eap" from file /etc/freeradius/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 1024
}
instantiate {
}
modules {
# Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration
# Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
# Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
# Instantiating module "files" from file /etc/freeradius/mods-enabled/files
reading pairlist file /etc/freeradius/mods-config/files/authorize
reading pairlist file /etc/freeradius/mods-config/files/accounting
reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
# Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail
# Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
# Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess
reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/mods-config/preprocess/hints
# Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog
# Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog
# Instantiating module "reject" from file /etc/freeradius/mods-enabled/always
# Instantiating module "fail" from file /etc/freeradius/mods-enabled/always
# Instantiating module "ok" from file /etc/freeradius/mods-enabled/always
# Instantiating module "handled" from file /etc/freeradius/mods-enabled/always
# Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always
# Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always
# Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always
# Instantiating module "noop" from file /etc/freeradius/mods-enabled/always
# Instantiating module "updated" from file /etc/freeradius/mods-enabled/always
# Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm
# Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm
# Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm
# Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm
# Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
# Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime
# Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
# Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response
# Instantiating module "sql" from file /etc/freeradius/mods-enabled/sql
rlm_sql_mysql: libmysql version: 5.5.46
mysql {
tls {
}
warnings = "auto"
}
rlm_sql (sql): Attempting to connect to database "radius"
rlm_sql (sql): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
spread = no
}
rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.185.3 via TCP/IP, server version 5.5.44-MariaDB-log, protocol version 10
rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.185.3 via TCP/IP, server version 5.5.44-MariaDB-log, protocol version 10
rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.185.3 via TCP/IP, server version 5.5.44-MariaDB-log, protocol version 10
rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.185.3 via TCP/IP, server version 5.5.44-MariaDB-log, protocol version 10
rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.185.3 via TCP/IP, server version 5.5.44-MariaDB-log, protocol version 10
# Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
ca_path = "/etc/freeradius/certs"
pem_file_type = yes
private_key_file = "/etc/freeradius/certs/server.pem"
certificate_file = "/etc/freeradius/certs/server.pem"
ca_file = "/etc/freeradius/certs/ca.pem"
private_key_password = <<< secret >>>
dh_file = "/etc/freeradius/certs/dh"
fragment_size = 1024
include_length = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
ecdh_curve = "prime256v1"
cache {
enable = yes
lifetime = 24
max_entries = 255
}
verify {
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
} # server
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "ldap" (see raddb/mods-available/README.rst)
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server inner-tunnel
server default { # from file /etc/freeradius/sites-enabled/default
# Loading authenticate {...}
# Loading authorize {...}
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 41462
Listening on proxy address :: port 46817
Ready to process requests
(0) Received Access-Request Id 200 from 192.168.185.14:44608 to 192.168.185.5:1812 length 193
(0) User-Name = "lantronix2"
(0) Called-Station-Id = "00-18-E7-D4-37-D0:OpenWrt2"
(0) NAS-Port-Type = Wireless-802.11
(0) NAS-Port = 2
(0) Calling-Station-Id = "00-80-A3-90-BC-AF"
(0) Connect-Info = "CONNECT 54Mbps 802.11g"
(0) Acct-Session-Id = "55EB4736-0000002B"
(0) WLAN-Pairwise-Cipher = 1027076
(0) WLAN-Group-Cipher = 1027076
(0) WLAN-AKM-Suite = 1027073
(0) Framed-MTU = 1400
(0) EAP-Message = 0x029a000f016c616e74726f6e697832
(0) Message-Authenticator = 0x6fb20b06fcd25f825522f943220bf4f1
(0) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (!&User-Name) {
(0) if (!&User-Name) -> FALSE
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@.*@/ ) {
(0) if (&User-Name =~ /@.*@/ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "lantronix2", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 154 length 15
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0) [eap] = ok
(0) } # authorize = ok
(0) Found Auth-Type = EAP
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0) authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 155 length 22
(0) eap: EAP session adding &reply:State = 0x006adfa500f1db0d
(0) [eap] = handled
(0) } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) Post-Auth-Type sub-section not found. Ignoring.
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0) Sent Access-Challenge Id 200 from 192.168.185.5:1812 to 192.168.185.14:44608 length 0
(0) EAP-Message = 0x019b00160410ddef0fae40446bc58c91c548aff715a9
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0x006adfa500f1db0d001ce714062cb325
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 201 from 192.168.185.14:44608 to 192.168.185.5:1812 length 202
(1) User-Name = "lantronix2"
(1) Called-Station-Id = "00-18-E7-D4-37-D0:OpenWrt2"
(1) NAS-Port-Type = Wireless-802.11
(1) NAS-Port = 2
(1) Calling-Station-Id = "00-80-A3-90-BC-AF"
(1) Connect-Info = "CONNECT 54Mbps 802.11g"
(1) Acct-Session-Id = "55EB4736-0000002B"
(1) WLAN-Pairwise-Cipher = 1027076
(1) WLAN-Group-Cipher = 1027076
(1) WLAN-AKM-Suite = 1027073
(1) Framed-MTU = 1400
(1) EAP-Message = 0x029b00060319
(1) State = 0x006adfa500f1db0d001ce714062cb325
(1) Message-Authenticator = 0xa1cf2cfccb447c8b4ce1092b38657d34
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(1) authorize {
(1) policy filter_username {
(1) if (!&User-Name) {
(1) if (!&User-Name) -> FALSE
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@.*@/ ) {
(1) if (&User-Name =~ /@.*@/ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "lantronix2", looking up realm NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 155 length 6
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1) [eap] = updated
(1) [files] = noop
(1) sql: EXPAND %{User-Name}
(1) sql: --> lantronix2
(1) sql: SQL-User-Name set to 'lantronix2'
rlm_sql (sql): Reserved connection (0)
(1) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
(1) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'lantronix2' ORDER BY id
(1) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'lantronix2' ORDER BY id
(1) sql: User found in radcheck table
(1) sql: Conditional check items matched, merging assignment check items
(1) sql: Cleartext-Password := "29jRd7F2"
(1) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id
(1) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'lantronix2' ORDER BY id
(1) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'lantronix2' ORDER BY id
(1) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
(1) sql: --> SELECT groupname FROM radusergroup WHERE username = 'lantronix2' ORDER BY priority
(1) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'lantronix2' ORDER BY priority
(1) sql: User not found in any groups
rlm_sql (sql): Released connection (0)
rlm_sql (sql): Need 5 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.185.3 via TCP/IP, server version 5.5.44-MariaDB-log, protocol version 10
(1) [sql] = ok
(1) [expiration] = noop
(1) [logintime] = noop
(1) pap: WARNING: Auth-Type already set. Not setting to PAP
(1) [pap] = noop
(1) } # authorize = updated
(1) Found Auth-Type = EAP
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1) authenticate {
(1) eap: Expiring EAP session with state 0x006adfa500f1db0d
(1) eap: Finished EAP session with state 0x006adfa500f1db0d
(1) eap: Previous EAP request found for state 0x006adfa500f1db0d, released from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: Initiating new EAP-TLS session
(1) eap_peap: Flushing SSL sessions (of #0)
(1) eap_peap: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 156 length 6
(1) eap: EAP session adding &reply:State = 0x006adfa501f6c60d
(1) [eap] = handled
(1) } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) Post-Auth-Type sub-section not found. Ignoring.
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1) Sent Access-Challenge Id 201 from 192.168.185.5:1812 to 192.168.185.14:44608 length 0
(1) EAP-Message = 0x019c00061920
(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0x006adfa501f6c60d001ce714062cb325
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 202 from 192.168.185.14:44608 to 192.168.185.5:1812 length 266
(2) User-Name = "lantronix2"
(2) Called-Station-Id = "00-18-E7-D4-37-D0:OpenWrt2"
(2) NAS-Port-Type = Wireless-802.11
(2) NAS-Port = 2
(2) Calling-Station-Id = "00-80-A3-90-BC-AF"
(2) Connect-Info = "CONNECT 54Mbps 802.11g"
(2) Acct-Session-Id = "55EB4736-0000002B"
(2) WLAN-Pairwise-Cipher = 1027076
(2) WLAN-Group-Cipher = 1027076
(2) WLAN-AKM-Suite = 1027073
(2) Framed-MTU = 1400
(2) EAP-Message = 0x029c00461900160302003b01000037030217aac2e5de5c46e5c08309c4f1db0dde1258531af8eebef6e16111dd769f06140000100013002f000a000400050060006400030100
(2) State = 0x006adfa501f6c60d001ce714062cb325
(2) Message-Authenticator = 0x2280ac094645529ac519a2c41cd8f101
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(2) authorize {
(2) policy filter_username {
(2) if (!&User-Name) {
(2) if (!&User-Name) -> FALSE
(2) if (&User-Name =~ / /) {
(2) if (&User-Name =~ / /) -> FALSE
(2) if (&User-Name =~ /@.*@/ ) {
(2) if (&User-Name =~ /@.*@/ ) -> FALSE
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(2) if (&User-Name =~ /@\./) {
(2) if (&User-Name =~ /@\./) -> FALSE
(2) } # policy filter_username = notfound
(2) [preprocess] = ok
(2) [chap] = noop
(2) [mschap] = noop
(2) [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "lantronix2", looking up realm NULL
(2) suffix: No such realm "NULL"
(2) [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 156 length 70
(2) eap: Continuing tunnel setup
(2) [eap] = ok
(2) } # authorize = ok
(2) Found Auth-Type = EAP
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2) authenticate {
(2) eap: Expiring EAP session with state 0x006adfa501f6c60d
(2) eap: Finished EAP session with state 0x006adfa501f6c60d
(2) eap: Previous EAP request found for state 0x006adfa501f6c60d, released from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Continuing EAP-TLS
(2) eap_peap: [eaptls verify] = ok
(2) eap_peap: Done initial handshake
(2) eap_peap: (other): before/accept initialization
(2) eap_peap: TLS_accept: before/accept initialization
(2) eap_peap: <<< TLS 1.1 [length 003b]
(2) eap_peap: TLS_accept: SSLv3 read client hello A
(2) eap_peap: >>> TLS 1.1 [length 004a]
(2) eap_peap: TLS_accept: SSLv3 write server hello A
(2) eap_peap: >>> TLS 1.1 [length 08d0]
(2) eap_peap: TLS_accept: SSLv3 write certificate A
(2) eap_peap: >>> TLS 1.1 [length 0004]
(2) eap_peap: TLS_accept: SSLv3 write server done A
(2) eap_peap: TLS_accept: SSLv3 flush data
(2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A
(2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A
(2) eap_peap: In SSL Handshake Phase
(2) eap_peap: In SSL Accept mode
(2) eap_peap: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 157 length 1004
(2) eap: EAP session adding &reply:State = 0x006adfa502f7c60d
(2) [eap] = handled
(2) } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) Post-Auth-Type sub-section not found. Ignoring.
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2) Sent Access-Challenge Id 202 from 192.168.185.5:1812 to 192.168.185.14:44608 length 0
(2) EAP-Message = 0x019d03ec19c00000092d160302004a020000460302f91191cd9c547d9d29ef6353766c5b0c67de768be3e20919f6efdb77a57a958120c2974d708db1407fcb387c121ab8082ed833b0678a1c6546404361811ae1cfda002f0016030208d00b0008cc0008c90003de308203da308202c2a0030201020201
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0x006adfa502f7c60d001ce714062cb325
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 203 from 192.168.185.14:44608 to 192.168.185.5:1812 length 202
(3) User-Name = "lantronix2"
(3) Called-Station-Id = "00-18-E7-D4-37-D0:OpenWrt2"
(3) NAS-Port-Type = Wireless-802.11
(3) NAS-Port = 2
(3) Calling-Station-Id = "00-80-A3-90-BC-AF"
(3) Connect-Info = "CONNECT 54Mbps 802.11g"
(3) Acct-Session-Id = "55EB4736-0000002B"
(3) WLAN-Pairwise-Cipher = 1027076
(3) WLAN-Group-Cipher = 1027076
(3) WLAN-AKM-Suite = 1027073
(3) Framed-MTU = 1400
(3) EAP-Message = 0x029d00061900
(3) State = 0x006adfa502f7c60d001ce714062cb325
(3) Message-Authenticator = 0xdb36d2b7d887990713035212b210c9c5
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(3) authorize {
(3) policy filter_username {
(3) if (!&User-Name) {
(3) if (!&User-Name) -> FALSE
(3) if (&User-Name =~ / /) {
(3) if (&User-Name =~ / /) -> FALSE
(3) if (&User-Name =~ /@.*@/ ) {
(3) if (&User-Name =~ /@.*@/ ) -> FALSE
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(3) if (&User-Name =~ /@\./) {
(3) if (&User-Name =~ /@\./) -> FALSE
(3) } # policy filter_username = notfound
(3) [preprocess] = ok
(3) [chap] = noop
(3) [mschap] = noop
(3) [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "lantronix2", looking up realm NULL
(3) suffix: No such realm "NULL"
(3) [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 157 length 6
(3) eap: Continuing tunnel setup
(3) [eap] = ok
(3) } # authorize = ok
(3) Found Auth-Type = EAP
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3) authenticate {
(3) eap: Expiring EAP session with state 0x006adfa502f7c60d
(3) eap: Finished EAP session with state 0x006adfa502f7c60d
(3) eap: Previous EAP request found for state 0x006adfa502f7c60d, released from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer ACKed our handshake fragment
(3) eap_peap: [eaptls verify] = request
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 158 length 1000
(3) eap: EAP session adding &reply:State = 0x006adfa503f4c60d
(3) [eap] = handled
(3) } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) Post-Auth-Type sub-section not found. Ignoring.
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3) Sent Access-Challenge Id 203 from 192.168.185.5:1812 to 192.168.185.14:44608 length 0
(3) EAP-Message = 0x019e03e8194061d855b2d98842d7d1cd568da968b4c1f2ace37a6b81faea1f17696a80a7f41c6f0b847e3434fbe51966aa763374aa818b1433c3392c732cba407426e2aea04f20b0d8f1a3256aba8ef5d0a110c1327cf332bdf148b6146110440004e5308204e1308203c9a003020102020900d8494d2e
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0x006adfa503f4c60d001ce714062cb325
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 204 from 192.168.185.14:44608 to 192.168.185.5:1812 length 202
(4) User-Name = "lantronix2"
(4) Called-Station-Id = "00-18-E7-D4-37-D0:OpenWrt2"
(4) NAS-Port-Type = Wireless-802.11
(4) NAS-Port = 2
(4) Calling-Station-Id = "00-80-A3-90-BC-AF"
(4) Connect-Info = "CONNECT 54Mbps 802.11g"
(4) Acct-Session-Id = "55EB4736-0000002B"
(4) WLAN-Pairwise-Cipher = 1027076
(4) WLAN-Group-Cipher = 1027076
(4) WLAN-AKM-Suite = 1027073
(4) Framed-MTU = 1400
(4) EAP-Message = 0x029e00061900
(4) State = 0x006adfa503f4c60d001ce714062cb325
(4) Message-Authenticator = 0xf52dd81ebe24b23dd4f8a376f39339d8
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(4) authorize {
(4) policy filter_username {
(4) if (!&User-Name) {
(4) if (!&User-Name) -> FALSE
(4) if (&User-Name =~ / /) {
(4) if (&User-Name =~ / /) -> FALSE
(4) if (&User-Name =~ /@.*@/ ) {
(4) if (&User-Name =~ /@.*@/ ) -> FALSE
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(4) if (&User-Name =~ /@\./) {
(4) if (&User-Name =~ /@\./) -> FALSE
(4) } # policy filter_username = notfound
(4) [preprocess] = ok
(4) [chap] = noop
(4) [mschap] = noop
(4) [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "lantronix2", looking up realm NULL
(4) suffix: No such realm "NULL"
(4) [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 158 length 6
(4) eap: Continuing tunnel setup
(4) [eap] = ok
(4) } # authorize = ok
(4) Found Auth-Type = EAP
(4) # Executing group from file /etc/freeradius/sites-enabled/default
(4) authenticate {
(4) eap: Expiring EAP session with state 0x006adfa503f4c60d
(4) eap: Finished EAP session with state 0x006adfa503f4c60d
(4) eap: Previous EAP request found for state 0x006adfa503f4c60d, released from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer ACKed our handshake fragment
(4) eap_peap: [eaptls verify] = request
(4) eap_peap: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 159 length 367
(4) eap: EAP session adding &reply:State = 0x006adfa504f5c60d
(4) [eap] = handled
(4) } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) Post-Auth-Type sub-section not found. Ignoring.
(4) # Executing group from file /etc/freeradius/sites-enabled/default
(4) Sent Access-Challenge Id 204 from 192.168.185.5:1812 to 192.168.185.14:44608 length 0
(4) EAP-Message = 0x019f016f19004d2eb1e01d22300c0603551d13040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e636f6d2f6578616d706c655f63612e63726c300d06092a864886f70d01010b0500038201010046e4ab5ee46d3ed7fe88b21360ce57b835
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0x006adfa504f5c60d001ce714062cb325
(4) Finished request
Waking up in 4.8 seconds.
(0) Cleaning up request packet ID 200 with timestamp +8
(1) Cleaning up request packet ID 201 with timestamp +8
(2) Cleaning up request packet ID 202 with timestamp +9
(3) Cleaning up request packet ID 203 with timestamp +9
(4) Cleaning up request packet ID 204 with timestamp +9
Ready to process requests
(5) Received Access-Request Id 205 from 192.168.185.14:44608 to 192.168.185.5:1812 length 266
(5) User-Name = "lantronix2"
(5) Called-Station-Id = "00-18-E7-D4-37-D0:OpenWrt2"
(5) NAS-Port-Type = Wireless-802.11
(5) NAS-Port = 2
(5) Calling-Station-Id = "00-80-A3-90-BC-AF"
(5) Connect-Info = "CONNECT 54Mbps 802.11g"
(5) Acct-Session-Id = "55EB4736-0000002B"
(5) WLAN-Pairwise-Cipher = 1027076
(5) WLAN-Group-Cipher = 1027076
(5) WLAN-AKM-Suite = 1027073
(5) Framed-MTU = 1400
(5) EAP-Message = 0x029f00461900160302003b010000370302fce1d33a46f4855f7ed253e529d9c7856394778c7f1a8f4024992852b5b24e130000100013002f000a000400050060006400030100
(5) State = 0x006adfa504f5c60d001ce714062cb325
(5) Message-Authenticator = 0xfd630279518887e001ba0d39cdc94ee6
(5) session-state: No cached attributes
(5) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(5) authorize {
(5) policy filter_username {
(5) if (!&User-Name) {
(5) if (!&User-Name) -> FALSE
(5) if (&User-Name =~ / /) {
(5) if (&User-Name =~ / /) -> FALSE
(5) if (&User-Name =~ /@.*@/ ) {
(5) if (&User-Name =~ /@.*@/ ) -> FALSE
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(5) if (&User-Name =~ /@\./) {
(5) if (&User-Name =~ /@\./) -> FALSE
(5) } # policy filter_username = notfound
(5) [preprocess] = ok
(5) [chap] = noop
(5) [mschap] = noop
(5) [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "lantronix2", looking up realm NULL
(5) suffix: No such realm "NULL"
(5) [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 159 length 70
(5) eap: Continuing tunnel setup
(5) [eap] = ok
(5) } # authorize = ok
(5) Found Auth-Type = EAP
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5) authenticate {
(5) eap: Expiring EAP session with state 0x006adfa504f5c60d
(5) eap: Finished EAP session with state 0x006adfa504f5c60d
(5) eap: Previous EAP request found for state 0x006adfa504f5c60d, released from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: [eaptls verify] = ok
(5) eap_peap: Done initial handshake
(5) eap_peap: <<< TLS 1.1 [length 003b]
(5) eap_peap: >>> TLS 1.1 [length 0002]
(5) eap_peap: ERROR: TLS Alert write:fatal:handshake failure
tls: TLS_accept: Error in SSLv3 read client hello C
(5) eap_peap: ERROR: SSL says: error:1412E152:SSL routines:SSL_PARSE_CLIENTHELLO_TLSEXT:unsafe legacy renegotiation disabled
(5) eap_peap: ERROR: SSL_read failed inside of TLS (-1), TLS session failed
(5) eap_peap: ERROR: TLS receive handshake failed during operation
(5) eap_peap: ERROR: [eaptls process] = fail
(5) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed
(5) eap: Sending EAP Failure (code 4) ID 159 length 4
(5) eap: Failed in EAP select
(5) [eap] = invalid
(5) } # authenticate = invalid
(5) Failed to authenticate the user
(5) Login incorrect (eap_peap: TLS Alert write:fatal:handshake failure): [lantronix2/<via Auth-Type = EAP>] (from client DIR-825 port 2 cli 00-80-A3-90-BC-AF)
(5) Using Post-Auth-Type Reject
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5) Post-Auth-Type REJECT {
(5) sql: EXPAND .query
(5) sql: --> .query
(5) sql: Using query template 'query'
rlm_sql (sql): Closing connection (1): Hit idle_timeout, was idle for 69 seconds
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing connection (2): Hit idle_timeout, was idle for 69 seconds
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing connection (3): Hit idle_timeout, was idle for 69 seconds
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing connection (4): Hit idle_timeout, was idle for 69 seconds
rlm_sql (sql): You probably need to lower "min"
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Reserved connection (0)
(5) sql: EXPAND %{User-Name}
(5) sql: --> lantronix2
(5) sql: SQL-User-Name set to 'lantronix2'
(5) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')
(5) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'lantronix2', '', 'Access-Reject', '2016-01-24 13:35:11')
(5) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'lantronix2', '', 'Access-Reject', '2016-01-24 13:35:11')
(5) sql: SQL query returned: success
(5) sql: 1 record(s) updated
rlm_sql (sql): Released connection (0)
rlm_sql (sql): Need 1 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (6), 1 of 30 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.185.3 via TCP/IP, server version 5.5.44-MariaDB-log, protocol version 10
rlm_sql (sql): Closing connection (5): Hit idle_timeout, was idle for 61 seconds
rlm_sql (sql): You probably need to lower "min"
rlm_sql_mysql: Socket destructor called, closing socket
(5) [sql] = ok
(5) attr_filter.access_reject: EXPAND %{User-Name}
(5) attr_filter.access_reject: --> lantronix2
(5) attr_filter.access_reject: Matched entry DEFAULT at line 11
(5) [attr_filter.access_reject] = updated
(5) [eap] = noop
(5) policy remove_reply_message_if_eap {
(5) if (&reply:EAP-Message && &reply:Reply-Message) {
(5) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(5) else {
(5) [noop] = noop
(5) } # else = noop
(5) } # policy remove_reply_message_if_eap = noop
(5) } # Post-Auth-Type REJECT = updated
(5) Delaying response for 1.000000 seconds
Waking up in 0.2 seconds.
Waking up in 0.7 seconds.
(5) Sending delayed response
(5) Sent Access-Reject Id 205 from 192.168.185.5:1812 to 192.168.185.14:44608 length 44
(5) EAP-Message = 0x049f0004
(5) Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.9 seconds.
(6) Received Access-Request Id 206 from 192.168.185.14:44608 to 192.168.185.5:1812 length 193
(6) User-Name = "lantronix2"
(6) Called-Station-Id = "00-18-E7-D4-37-D0:OpenWrt2"
(6) NAS-Port-Type = Wireless-802.11
(6) NAS-Port = 2
(6) Calling-Station-Id = "00-80-A3-90-BC-AF"
(6) Connect-Info = "CONNECT 54Mbps 802.11g"
(6) Acct-Session-Id = "55EB4736-0000002B"
(6) WLAN-Pairwise-Cipher = 1027076
(6) WLAN-Group-Cipher = 1027076
(6) WLAN-AKM-Suite = 1027073
(6) Framed-MTU = 1400
(6) EAP-Message = 0x0226000f016c616e74726f6e697832
(6) Message-Authenticator = 0xf668f2b50e4dfb7c36cabdbe5ecffdad
(6) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(6) authorize {
(6) policy filter_username {
(6) if (!&User-Name) {
(6) if (!&User-Name) -> FALSE
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@.*@/ ) {
(6) if (&User-Name =~ /@.*@/ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # policy filter_username = notfound
(6) [preprocess] = ok
(6) [chap] = noop
(6) [mschap] = noop
(6) [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "lantronix2", looking up realm NULL
(6) suffix: No such realm "NULL"
(6) [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 38 length 15
(6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = EAP
(6) # Executing group from file /etc/freeradius/sites-enabled/default
(6) authenticate {
(6) eap: Peer sent packet with method EAP Identity (1)
(6) eap: Calling submodule eap_md5 to process data
(6) eap_md5: Issuing MD5 Challenge
(6) eap: Sending EAP Request (code 1) ID 39 length 22
(6) eap: EAP session adding &reply:State = 0x7a364e987a114a40
(6) [eap] = handled
(6) } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) Post-Auth-Type sub-section not found. Ignoring.
(6) # Executing group from file /etc/freeradius/sites-enabled/default
(6) Sent Access-Challenge Id 206 from 192.168.185.5:1812 to 192.168.185.14:44608 length 0
(6) EAP-Message = 0x012700160410e92e75cfc04b53761f9e287782d27e3b
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0x7a364e987a114a40d9aaba2a815a3350
(6) Finished request
Waking up in 2.7 seconds.
(7) Received Access-Request Id 207 from 192.168.185.14:44608 to 192.168.185.5:1812 length 202
(7) User-Name = "lantronix2"
(7) Called-Station-Id = "00-18-E7-D4-37-D0:OpenWrt2"
(7) NAS-Port-Type = Wireless-802.11
(7) NAS-Port = 2
(7) Calling-Station-Id = "00-80-A3-90-BC-AF"
(7) Connect-Info = "CONNECT 54Mbps 802.11g"
(7) Acct-Session-Id = "55EB4736-0000002B"
(7) WLAN-Pairwise-Cipher = 1027076
(7) WLAN-Group-Cipher = 1027076
(7) WLAN-AKM-Suite = 1027073
(7) Framed-MTU = 1400
(7) EAP-Message = 0x022700060319
(7) State = 0x7a364e987a114a40d9aaba2a815a3350
(7) Message-Authenticator = 0xf9eae68ab9d334534770634209d04e7e
(7) session-state: No cached attributes
(7) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(7) authorize {
(7) policy filter_username {
(7) if (!&User-Name) {
(7) if (!&User-Name) -> FALSE
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@.*@/ ) {
(7) if (&User-Name =~ /@.*@/ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # policy filter_username = notfound
(7) [preprocess] = ok
(7) [chap] = noop
(7) [mschap] = noop
(7) [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "lantronix2", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 39 length 6
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7) [eap] = updated
(7) [files] = noop
(7) sql: EXPAND %{User-Name}
(7) sql: --> lantronix2
(7) sql: SQL-User-Name set to 'lantronix2'
rlm_sql (sql): Reserved connection (0)
(7) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
(7) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'lantronix2' ORDER BY id
(7) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'lantronix2' ORDER BY id
(7) sql: User found in radcheck table
(7) sql: Conditional check items matched, merging assignment check items
(7) sql: Cleartext-Password := "29jRd7F2"
(7) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id
(7) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'lantronix2' ORDER BY id
(7) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'lantronix2' ORDER BY id
(7) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
(7) sql: --> SELECT groupname FROM radusergroup WHERE username = 'lantronix2' ORDER BY priority
(7) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'lantronix2' ORDER BY priority
(7) sql: User not found in any groups
rlm_sql (sql): Released connection (0)
rlm_sql (sql): Need 1 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (7), 1 of 30 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.185.3 via TCP/IP, server version 5.5.44-MariaDB-log, protocol version 10
(7) [sql] = ok
(7) [expiration] = noop
(7) [logintime] = noop
(7) pap: WARNING: Auth-Type already set. Not setting to PAP
(7) [pap] = noop
(7) } # authorize = updated
(7) Found Auth-Type = EAP
(7) # Executing group from file /etc/freeradius/sites-enabled/default
(7) authenticate {
(7) eap: Expiring EAP session with state 0x7a364e987a114a40
(7) eap: Finished EAP session with state 0x7a364e987a114a40
(7) eap: Previous EAP request found for state 0x7a364e987a114a40, released from the list
(7) eap: Peer sent packet with method EAP NAK (3)
(7) eap: Found mutually acceptable type PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: Initiating new EAP-TLS session
(7) eap_peap: [eaptls start] = request
(7) eap: Sending EAP Request (code 1) ID 40 length 6
(7) eap: EAP session adding &reply:State = 0x7a364e987b1e5740
(7) [eap] = handled
(7) } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) Post-Auth-Type sub-section not found. Ignoring.
(7) # Executing group from file /etc/freeradius/sites-enabled/default
(7) Sent Access-Challenge Id 207 from 192.168.185.5:1812 to 192.168.185.14:44608 length 0
(7) EAP-Message = 0x012800061920
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) State = 0x7a364e987b1e5740d9aaba2a815a3350
(7) Finished request
Waking up in 2.6 seconds.
(8) Received Access-Request Id 208 from 192.168.185.14:44608 to 192.168.185.5:1812 length 266
(8) User-Name = "lantronix2"
(8) Called-Station-Id = "00-18-E7-D4-37-D0:OpenWrt2"
(8) NAS-Port-Type = Wireless-802.11
(8) NAS-Port = 2
(8) Calling-Station-Id = "00-80-A3-90-BC-AF"
(8) Connect-Info = "CONNECT 54Mbps 802.11g"
(8) Acct-Session-Id = "55EB4736-0000002B"
(8) WLAN-Pairwise-Cipher = 1027076
(8) WLAN-Group-Cipher = 1027076
(8) WLAN-AKM-Suite = 1027073
(8) Framed-MTU = 1400
(8) EAP-Message = 0x022800461900160302003b01000037030249b1f2df45fd4914ca43409946f3692230dd1c9230253e76f03063e54fed85a80000100013002f000a000400050060006400030100
(8) State = 0x7a364e987b1e5740d9aaba2a815a3350
(8) Message-Authenticator = 0x40591e833fe5574f06d97c73e4db9a35
(8) session-state: No cached attributes
(8) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(8) authorize {
(8) policy filter_username {
(8) if (!&User-Name) {
(8) if (!&User-Name) -> FALSE
(8) if (&User-Name =~ / /) {
(8) if (&User-Name =~ / /) -> FALSE
(8) if (&User-Name =~ /@.*@/ ) {
(8) if (&User-Name =~ /@.*@/ ) -> FALSE
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(8) if (&User-Name =~ /@\./) {
(8) if (&User-Name =~ /@\./) -> FALSE
(8) } # policy filter_username = notfound
(8) [preprocess] = ok
(8) [chap] = noop
(8) [mschap] = noop
(8) [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "lantronix2", looking up realm NULL
(8) suffix: No such realm "NULL"
(8) [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 40 length 70
(8) eap: Continuing tunnel setup
(8) [eap] = ok
(8) } # authorize = ok
(8) Found Auth-Type = EAP
(8) # Executing group from file /etc/freeradius/sites-enabled/default
(8) authenticate {
(8) eap: Expiring EAP session with state 0x7a364e987b1e5740
(8) eap: Finished EAP session with state 0x7a364e987b1e5740
(8) eap: Previous EAP request found for state 0x7a364e987b1e5740, released from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: Continuing EAP-TLS
(8) eap_peap: [eaptls verify] = ok
(8) eap_peap: Done initial handshake
(8) eap_peap: (other): before/accept initialization
(8) eap_peap: TLS_accept: before/accept initialization
(8) eap_peap: <<< TLS 1.1 [length 003b]
(8) eap_peap: TLS_accept: SSLv3 read client hello A
(8) eap_peap: >>> TLS 1.1 [length 004a]
(8) eap_peap: TLS_accept: SSLv3 write server hello A
(8) eap_peap: >>> TLS 1.1 [length 08d0]
(8) eap_peap: TLS_accept: SSLv3 write certificate A
(8) eap_peap: >>> TLS 1.1 [length 0004]
(8) eap_peap: TLS_accept: SSLv3 write server done A
(8) eap_peap: TLS_accept: SSLv3 flush data
(8) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A
(8) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A
(8) eap_peap: In SSL Handshake Phase
(8) eap_peap: In SSL Accept mode
(8) eap_peap: [eaptls process] = handled
(8) eap: Sending EAP Request (code 1) ID 41 length 1004
(8) eap: EAP session adding &reply:State = 0x7a364e98781f5740
(8) [eap] = handled
(8) } # authenticate = handled
(8) Using Post-Auth-Type Challenge
(8) Post-Auth-Type sub-section not found. Ignoring.
(8) # Executing group from file /etc/freeradius/sites-enabled/default
(8) Sent Access-Challenge Id 208 from 192.168.185.5:1812 to 192.168.185.14:44608 length 0
(8) EAP-Message = 0x012903ec19c00000092d160302004a020000460302270864e7c1a7ea7c38125d72b7fa5a5bca7b443e168134d62b23536039f90ed220dd4a818eeeb8ab5accf56732182cad51c98dea944c285d3118c09334ccec552e002f0016030208d00b0008cc0008c90003de308203da308202c2a0030201020201
(8) Message-Authenticator = 0x00000000000000000000000000000000
(8) State = 0x7a364e98781f5740d9aaba2a815a3350
(8) Finished request
Waking up in 2.6 seconds.
(9) Received Access-Request Id 209 from 192.168.185.14:44608 to 192.168.185.5:1812 length 202
(9) User-Name = "lantronix2"
(9) Called-Station-Id = "00-18-E7-D4-37-D0:OpenWrt2"
(9) NAS-Port-Type = Wireless-802.11
(9) NAS-Port = 2
(9) Calling-Station-Id = "00-80-A3-90-BC-AF"
(9) Connect-Info = "CONNECT 54Mbps 802.11g"
(9) Acct-Session-Id = "55EB4736-0000002B"
(9) WLAN-Pairwise-Cipher = 1027076
(9) WLAN-Group-Cipher = 1027076
(9) WLAN-AKM-Suite = 1027073
(9) Framed-MTU = 1400
(9) EAP-Message = 0x022900061900
(9) State = 0x7a364e98781f5740d9aaba2a815a3350
(9) Message-Authenticator = 0x4f2ebfd3d3d09a85be04d1b0b3b1e1fb
(9) session-state: No cached attributes
(9) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(9) authorize {
(9) policy filter_username {
(9) if (!&User-Name) {
(9) if (!&User-Name) -> FALSE
(9) if (&User-Name =~ / /) {
(9) if (&User-Name =~ / /) -> FALSE
(9) if (&User-Name =~ /@.*@/ ) {
(9) if (&User-Name =~ /@.*@/ ) -> FALSE
(9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(9) if (&User-Name =~ /@\./) {
(9) if (&User-Name =~ /@\./) -> FALSE
(9) } # policy filter_username = notfound
(9) [preprocess] = ok
(9) [chap] = noop
(9) [mschap] = noop
(9) [digest] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "lantronix2", looking up realm NULL
(9) suffix: No such realm "NULL"
(9) [suffix] = noop
(9) eap: Peer sent EAP Response (code 2) ID 41 length 6
(9) eap: Continuing tunnel setup
(9) [eap] = ok
(9) } # authorize = ok
(9) Found Auth-Type = EAP
(9) # Executing group from file /etc/freeradius/sites-enabled/default
(9) authenticate {
(9) eap: Expiring EAP session with state 0x7a364e98781f5740
(9) eap: Finished EAP session with state 0x7a364e98781f5740
(9) eap: Previous EAP request found for state 0x7a364e98781f5740, released from the list
(9) eap: Peer sent packet with method EAP PEAP (25)
(9) eap: Calling submodule eap_peap to process data
(9) eap_peap: Continuing EAP-TLS
(9) eap_peap: Peer ACKed our handshake fragment
(9) eap_peap: [eaptls verify] = request
(9) eap_peap: [eaptls process] = handled
(9) eap: Sending EAP Request (code 1) ID 42 length 1000
(9) eap: EAP session adding &reply:State = 0x7a364e98791c5740
(9) [eap] = handled
(9) } # authenticate = handled
(9) Using Post-Auth-Type Challenge
(9) Post-Auth-Type sub-section not found. Ignoring.
(9) # Executing group from file /etc/freeradius/sites-enabled/default
(9) Sent Access-Challenge Id 209 from 192.168.185.5:1812 to 192.168.185.14:44608 length 0
(9) EAP-Message = 0x012a03e8194061d855b2d98842d7d1cd568da968b4c1f2ace37a6b81faea1f17696a80a7f41c6f0b847e3434fbe51966aa763374aa818b1433c3392c732cba407426e2aea04f20b0d8f1a3256aba8ef5d0a110c1327cf332bdf148b6146110440004e5308204e1308203c9a003020102020900d8494d2e
(9) Message-Authenticator = 0x00000000000000000000000000000000
(9) State = 0x7a364e98791c5740d9aaba2a815a3350
(9) Finished request
Waking up in 2.6 seconds.
(10) Received Access-Request Id 210 from 192.168.185.14:44608 to 192.168.185.5:1812 length 202
(10) User-Name = "lantronix2"
(10) Called-Station-Id = "00-18-E7-D4-37-D0:OpenWrt2"
(10) NAS-Port-Type = Wireless-802.11
(10) NAS-Port = 2
(10) Calling-Station-Id = "00-80-A3-90-BC-AF"
(10) Connect-Info = "CONNECT 54Mbps 802.11g"
(10) Acct-Session-Id = "55EB4736-0000002B"
(10) WLAN-Pairwise-Cipher = 1027076
(10) WLAN-Group-Cipher = 1027076
(10) WLAN-AKM-Suite = 1027073
(10) Framed-MTU = 1400
(10) EAP-Message = 0x022a00061900
(10) State = 0x7a364e98791c5740d9aaba2a815a3350
(10) Message-Authenticator = 0xb19ba679e7271294054abad6dd654964
(10) session-state: No cached attributes
(10) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(10) authorize {
(10) policy filter_username {
(10) if (!&User-Name) {
(10) if (!&User-Name) -> FALSE
(10) if (&User-Name =~ / /) {
(10) if (&User-Name =~ / /) -> FALSE
(10) if (&User-Name =~ /@.*@/ ) {
(10) if (&User-Name =~ /@.*@/ ) -> FALSE
(10) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(10) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(10) if (&User-Name =~ /@\./) {
(10) if (&User-Name =~ /@\./) -> FALSE
(10) } # policy filter_username = notfound
(10) [preprocess] = ok
(10) [chap] = noop
(10) [mschap] = noop
(10) [digest] = noop
(10) suffix: Checking for suffix after "@"
(10) suffix: No '@' in User-Name = "lantronix2", looking up realm NULL
(10) suffix: No such realm "NULL"
(10) [suffix] = noop
(10) eap: Peer sent EAP Response (code 2) ID 42 length 6
(10) eap: Continuing tunnel setup
(10) [eap] = ok
(10) } # authorize = ok
(10) Found Auth-Type = EAP
(10) # Executing group from file /etc/freeradius/sites-enabled/default
(10) authenticate {
(10) eap: Expiring EAP session with state 0x7a364e98791c5740
(10) eap: Finished EAP session with state 0x7a364e98791c5740
(10) eap: Previous EAP request found for state 0x7a364e98791c5740, released from the list
(10) eap: Peer sent packet with method EAP PEAP (25)
(10) eap: Calling submodule eap_peap to process data
(10) eap_peap: Continuing EAP-TLS
(10) eap_peap: Peer ACKed our handshake fragment
(10) eap_peap: [eaptls verify] = request
(10) eap_peap: [eaptls process] = handled
(10) eap: Sending EAP Request (code 1) ID 43 length 367
(10) eap: EAP session adding &reply:State = 0x7a364e987e1d5740
(10) [eap] = handled
(10) } # authenticate = handled
(10) Using Post-Auth-Type Challenge
(10) Post-Auth-Type sub-section not found. Ignoring.
(10) # Executing group from file /etc/freeradius/sites-enabled/default
(10) Sent Access-Challenge Id 210 from 192.168.185.5:1812 to 192.168.185.14:44608 length 0
(10) EAP-Message = 0x012b016f19004d2eb1e01d22300c0603551d13040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e636f6d2f6578616d706c655f63612e63726c300d06092a864886f70d01010b0500038201010046e4ab5ee46d3ed7fe88b21360ce57b835
(10) Message-Authenticator = 0x00000000000000000000000000000000
(10) State = 0x7a364e987e1d5740d9aaba2a815a3350
(10) Finished request
Waking up in 2.6 seconds.
(5) Cleaning up request packet ID 205 with timestamp +69
Waking up in 2.2 seconds.
(6) Cleaning up request packet ID 206 with timestamp +72
(7) Cleaning up request packet ID 207 with timestamp +72
(8) Cleaning up request packet ID 208 with timestamp +72
(9) Cleaning up request packet ID 209 with timestamp +72
(10) Cleaning up request packet ID 210 with timestamp +72
Ready to process requests
More information about the Freeradius-Users
mailing list