Swapping input and output octets

[Anuruddha Premalal]

Hi Arran,

Thanks a lot. It worked! Following is the code snippet I used.

if( request:NAS-IP-Address == "192.168.1.7" && Acct-Status-Type != "Start"){
    update request {
        Tmp-Integer-0 = &Acct-Input-Octets
        Acct-Input-Octets := &Acct-Output-Octets
        Acct-Output-Octets := &Tmp-Integer-0
    }
}



Regards,
Anuruddha

On Wed, Jul 13, 2016 at 10:37 AM, Arran Cudbard-Bell <
a.cudbardb at freeradius.org> wrote:

>
> > On 13 Jul 2016, at 00:43, Anuruddha Premalal <
> anuruddhapremalal at gmail.com> wrote:
> >
> > Hi All,
> >
> > One of the NAS in our network is reporting the accounting the wrong way
> > (input and output octets are swapped).
> >
> > I'm trying to fix it by adding a logic similar to below at the start of
> the
> > accounting section
> >
> > if( request:NAS-IP-Address == "192.168.1.7" && Acct-Status-Type !=
> "Start"){
> >    Temp-Attribute = &Acct-Input-Octets
> >    update request {
> >        Acct-Input-Octets := &Temp-Attribute
> >        Acct-Output-Octets := &Acct-Input-Octets
> >    }
> > }
> >
> > I need to use a temporary variable to perform the data swapping.
> However I
> > couldn't find a documentation of use of temporary variables or any such.
> > Is there a better way to achieve this. How can a variable be used to
> store
> > a value for a temporary reason without adding it to the request body.
>
> Tmp-Integer-0
>
> they're in share/freeradius.dictionary.internal
>
> -Arran
>
> Arran Cudbard-Bell <a.cudbardb at freeradius.org>
> FreeRADIUS Development Team
>
> FD31 3077 42EC 7FCD 32FE 5EE2 56CF 27F9 30A8 CAA2
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>



-- 
*Anuruddha Premalala (MIEEE)Mobile : +94717213122E-mail  :
anuruddhapremalal at gmail.com <anuruddhapremalal at gmail.com>web      :
www.anuruddha.org <http://www.anuruddha.org>Sri Lanka.*