commn with clients behind bridge

[Alan DeKok]

On Jul 25, 2016, at 1:00 PM, Abhishek <abhishek15 at iitb.ac.in> wrote:
> 
> I’m creating multiple AP’s(wlan0,wlan1,...) on a openwrt system and using them with a freeradius server. The problem is all these are in a bridge(br0). So how do I configure clients.conf for multiple ap’s under bridge.

  You don't.  RADIUS is IP based.  Bridging is a layer under RADIUS.

  Just configure the IP addresses as always,

  Alan DeKok.