New Install

Cameron Murray cameron at techpath.com.au
Fri Mar 11 02:56:15 CET 2016


Guys,

First time member and have a slight issue.

Fresh Centos 6.7 64bit install and Freeradius installed with a remote MySQL server. Service launches perfectly in debug and daemon however it does not appear to be listening correctly. Netstat -a shows Radius and Radius Account open on * however when I query radius with radtest or radping it sees no data.

udp        0      0 *:radius                    *:*
udp        0      0 *:radius-acct               *:*

Iptables has been disabled and confirmed after reboot. I've tested radping from localhost and the Mysql Server with the same result:

radtest test test 192.168.0.250 1812 123456789
Sending Access-Request of id 15 to 192.168.0.250 port 1812
        User-Name = "test"
        User-Password = "test"
        NAS-IP-Address = 192.168.10.251
        NAS-Port = 1812
        Message-Authenticator = 0x00000000000000000000000000000000

Sending Access-Request of id 15 to 192.168.0.250 port 1812
        User-Name = "test"
        User-Password = "test"
        NAS-IP-Address = 192.168.10.251
        NAS-Port = 1812
        Message-Authenticator = 0x00000000000000000000000000000000

Sending Access-Request of id 15 to 192.168.0.250 port 1812
        User-Name = "test"
        User-Password = "test"
        NAS-IP-Address = 192.168.10.251
        NAS-Port = 1812
        Message-Authenticator = 0x00000000000000000000000000000000
radclient: no response from server for ID 15 socket 3

Is there a secret to make it listen correctly?

TIA.

Cameron


More information about the Freeradius-Users mailing list