FR with Mikrotik - FUP Quota Bandwidth not changing auto

AACABLE / Mikrotik System aacable79 at gmail.com
Thu Mar 24 15:43:27 CET 2016


I have different counters like daily / weekly monthly so If I remove the
counter, where I will be putting the query?
How-to send the COA query via FR. Can you please give me any code example
for COA ?

Accept my apology for asking dumb question :)

On Thu, Mar 24, 2016 at 7:37 PM, Anirudh Malhotra <8zero2ops at gmail.com>
wrote:

> Hi,
>
> Yes exactly NAS is doing what freeradius has asked it to do. It is
> disconnecting when the limit sent by radius is reached.
>
> So in order to achieve what you want, remove the counter and use the query
> "SELECT SUM(AcctInputOctets)+SUM(AcctOutputOctets) FROM radacct
> WHERE UserName='%{%k}'"
>
> And if this goes greater than what is given in table for user then send an
> update coa.
>
> Hope this helps
>
> BR,
> Anirudh Malhotra
> 8zero2
> Mail: 8zero2.in at gmail.com
> Facebook: www.facebook.com/8zero2
> Twitter: @8zero2_in
> Blog: blog.8zero2.in
>
> On 24 Mar 2016, 19:58 +0530, AACABLE / Mikrotik System<aacable79 at gmail.com>,
> wrote:
> > Greetings,
> >
> > I have FR 2.x with Mikrotik 6.x. I want that when user quota limit end,
> his
> > bandwidth package should change from 1mb to 512k. I have made counter and
> > its working as expected. The only issue is that the changes are not being
> > done on the fly. Changes applies only when user disconnects, and
> re-login.
> > Same thing happens for users whose monthly quota limit finish but they
> are
> > keep connected and gets denied only on re-login.
> >
> > When I issue following command it works fine. (for the bandwidth COA and
> > POD)
> >
> > echo User-Name := "zaib", Mikrotik-Rate-Limit = 512k/512k | radclient -x
> > 101.11.11.255:1700 coa 12345
> > [Mikrotik accepts this command and change the bandwidth on the fly]
> >
> > echo user-name=zaib | radclient -x 101.11.11.255:1700 disconnect 12345
> > [Mikrotik accepts this command and disconnects the user as instructed]
> >
> > How can I do this on the fly using FR? I know its the job of NAS but NAS
> > will act only when FR will tell him to do so. Kindly assist.
> >
> >
> > *SQL *Counter:
> > *=============*
> > counter-name = Mikrotik-Total-Limit
> > check-name = Mikrotik-Total-Limit
> > reply-name = Mikrotik-Total-Limit
> > sqlmod-inst = sql
> > key = User-Name
> > reset = daily
> > query = "SELECT SUM(AcctInputOctets)+SUM(AcctOutputOctets) FROM radacct
> > WHERE UserName='%{%k}'"
> > }
> > *=============*
> > *AUTHORIZE *Section:
> >
> > dailyquota {
> > reject = 1
> > }
> > if (reject) {
> > ok
> > update reply {
> > Mikrotik-Rate-Limit := "512k/512k"
> > Reply-Message := "You have reached your daily 300MB transfer limit.
> > Enforcing 512k FUP Policy - zaib "
> > }
> > }
> > *=============*
> >
> > --
> > Regard's
> > JAY-Z
> > -
> > List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html




-- 
Regard's


More information about the Freeradius-Users mailing list