EAP-TTLS Not working
Willy Offermans
FreeWilly at Offermans.Rompen.nl
Fri Sep 2 15:04:15 CEST 2016
Dear Matthew and freeradius friends,
On Fri, Sep 02, 2016 at 02:49:31PM +0200, Matthew Pulis wrote:
> Dear friends,
>
> I am trying to get EAP-TTLS working but to no avail. I am using Android
> tablet to test this WiFi connection. These are the settings: EAP method:
> TTLS. Phase 2 authentication: None. CA certificate (unspecified). Identity:
> mpulis. Anonymous identity: <BLANK> and Password: openldap.
To my opinion, you need a Phase 2 authentication. EAP-TTLS is an encrypted
carrier for Phase 2 authentication.
>
> I have followed these tutorials for the task:
> http://www.sosdg.org/unifi/freeradius and
> http://deployingradius.com/documents/configuration/certificates.html
>
> Any pointers as to where should I start searching for the bug please?
>
> Thanks and best regards
>
>
> The user if tested using radtest works find as per below:
>
> radius at radius:~$ radtest mpulis openldap localhost 1812 testing456
> Sent Access-Request Id 95 from 0.0.0.0:39322 to 127.0.0.1:1812 length 76
> User-Name = "mpulis"
> User-Password = "openldap"
> NAS-IP-Address = 127.0.1.1
> NAS-Port = 1812
> Message-Authenticator = 0x00
> Cleartext-Password = "openldap"
> Received Access-Accept Id 95 from 127.0.0.1:1812 to 0.0.0.0:0 length 36
> Tunnel-Type:0 = VLAN
> Tunnel-Medium-Type:0 = 802
> Tunnel-Private-Group-Id:0 = "11"
>
>
> This is the log:
>
> radius at daloradius:/etc/freeradius/mods-enabled$ sudo freeradius -X
> Server was built with:
> accounting : yes
> authentication : yes
> ascend-binary-attributes : yes
> coa : yes
> control-socket : yes
> detail : yes
> dhcp : yes
> dynamic-clients : yes
> osfc2 : no
> proxy : yes
> regex-pcre : no
> regex-posix : yes
> regex-posix-extended : yes
> session-management : yes
> stats : yes
> tcp : yes
> threads : yes
> tls : yes
> unlang : yes
> vmps : yes
> developer : no
> Server core libs:
> freeradius-server : 3.0.11
> talloc : 2.0.*
> ssl : 1.0.2g release
> Endianness:
> little
> Compilation flags:
> cppflags : -Wdate-time -D_FORTIFY_SOURCE=2
> cflags : -I/build/freeradius-G88Mfz/freeradius-3.0.11
> -I/build/freeradius-G88Mfz/freeradius-3.0.11/src -include
> /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/autoconf.h
> -include
> /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/build.h
> -include
> /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/features.h
> -include
> /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/radpaths.h
> -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat
> -Werror=format-security -O2 -Wall -std=c99 -D_GNU_SOURCE -D_REENTRANT
> -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -DNDEBUG -DIS_MODULE=1
> ldflags : -Wl,-Bsymbolic-functions -Wl,-z,relro
> libs : -lcrypto -lssl -ltalloc -lcap -lnsl -lresolv -ldl -lpthread
> -lreadline
>
> Copyright (C) 1999-2016 The FreeRADIUS server project and contributors
> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE
> You may redistribute copies of FreeRADIUS under the terms of the
> GNU General Public License
> For more information about these matters, see the file named COPYRIGHT
> Starting - reading configuration files ...
> including dictionary file /usr/share/freeradius/dictionary
> including dictionary file /usr/share/freeradius/dictionary.dhcp
> including dictionary file /usr/share/freeradius/dictionary.vqp
> including dictionary file /etc/freeradius/dictionary
> including configuration file /etc/freeradius/radiusd.conf
> including configuration file /etc/freeradius/proxy.conf
> including configuration file /etc/freeradius/clients.conf
> including files in directory /etc/freeradius/mods-enabled/
> including configuration file /etc/freeradius/mods-enabled/mschap
> including configuration file /etc/freeradius/mods-enabled/always
> including configuration file /etc/freeradius/mods-enabled/soh
> including configuration file /etc/freeradius/mods-enabled/eap
> including configuration file /etc/freeradius/mods-enabled/dynamic_clients
> including configuration file /etc/freeradius/mods-enabled/logintime
> including configuration file /etc/freeradius/mods-enabled/exec
> including configuration file /etc/freeradius/mods-enabled/realm
> including configuration file /etc/freeradius/mods-enabled/utf8
> including configuration file /etc/freeradius/mods-enabled/echo
> including configuration file /etc/freeradius/mods-enabled/unix
> including configuration file /etc/freeradius/mods-enabled/detail.log
> including configuration file /etc/freeradius/mods-enabled/expr
> including configuration file /etc/freeradius/mods-enabled/ntlm_auth
> including configuration file /etc/freeradius/mods-enabled/pap
> including configuration file /etc/freeradius/mods-enabled/ldap
> including configuration file /etc/freeradius/mods-enabled/digest
> including configuration file /etc/freeradius/mods-enabled/files
> including configuration file /etc/freeradius/mods-enabled/preprocess
> including configuration file /etc/freeradius/mods-enabled/cache_eap
> including configuration file /etc/freeradius/mods-enabled/detail
> including configuration file /etc/freeradius/mods-enabled/expiration
> including configuration file /etc/freeradius/mods-enabled/chap
> including configuration file /etc/freeradius/mods-enabled/sradutmp
> including configuration file /etc/freeradius/mods-enabled/radutmp
> including configuration file /etc/freeradius/mods-enabled/passwd
> including configuration file /etc/freeradius/mods-enabled/linelog
> including configuration file /etc/freeradius/mods-enabled/unpack
> including configuration file /etc/freeradius/mods-enabled/attr_filter
> including configuration file /etc/freeradius/mods-enabled/replicate
> including files in directory /etc/freeradius/policy.d/
> including configuration file /etc/freeradius/policy.d/filter
> including configuration file /etc/freeradius/policy.d/control
> including configuration file /etc/freeradius/policy.d/canonicalization
> including configuration file /etc/freeradius/policy.d/eap
> including configuration file /etc/freeradius/policy.d/debug
> including configuration file /etc/freeradius/policy.d/dhcp
> including configuration file /etc/freeradius/policy.d/accounting
> including configuration file /etc/freeradius/policy.d/abfab-tr
> including configuration file /etc/freeradius/policy.d/cui
> including configuration file /etc/freeradius/policy.d/operator-name
> including files in directory /etc/freeradius/sites-enabled/
> including configuration file /etc/freeradius/sites-enabled/inner-tunnel
> including configuration file /etc/freeradius/sites-enabled/default
> main {
> security {
> user = "freerad"
> group = "freerad"
> allow_core_dumps = no
> }
> name = "freeradius"
> prefix = "/usr"
> localstatedir = "/var"
> logdir = "/var/log/freeradius"
> run_dir = "/var/run/freeradius"
> }
> main {
> name = "freeradius"
> prefix = "/usr"
> localstatedir = "/var"
> sbindir = "/usr/sbin"
> logdir = "/var/log/freeradius"
> run_dir = "/var/run/freeradius"
> libdir = "/usr/lib/freeradius"
> radacctdir = "/var/log/freeradius/radacct"
> hostname_lookups = no
> max_request_time = 30
> cleanup_delay = 5
> max_requests = 16384
> pidfile = "/var/run/freeradius/freeradius.pid"
> checkrad = "/usr/sbin/checkrad"
> debug_level = 0
> proxy_requests = yes
> log {
> stripped_names = no
> auth = no
> auth_badpass = no
> auth_goodpass = no
> colourise = yes
> msg_denied = "You are already logged in - access denied"
> }
> resources {
> }
> security {
> max_attributes = 200
> reject_delay = 1.000000
> status_server = yes
> }
> }
> radiusd: #### Loading Realms and Home Servers ####
> proxy server {
> retry_delay = 5
> retry_count = 3
> default_fallback = no
> dead_time = 120
> wake_all_if_all_dead = no
> }
> home_server localhost {
> ipaddr = 127.0.0.1
> port = 1812
> type = "auth"
> secret = <<< secret >>>
> response_window = 20.000000
> response_timeouts = 1
> max_outstanding = 65536
> zombie_period = 40
> status_check = "status-server"
> ping_interval = 30
> check_interval = 30
> check_timeout = 4
> num_answers_to_alive = 3
> revive_interval = 120
> limit {
> max_connections = 16
> max_requests = 0
> lifetime = 0
> idle_timeout = 0
> }
> coa {
> irt = 2
> mrt = 16
> mrc = 5
> mrd = 30
> }
> }
> home_server_pool my_auth_failover {
> type = fail-over
> home_server = localhost
> }
> realm example.com {
> auth_pool = my_auth_failover
> }
> realm LOCAL {
> }
> radiusd: #### Loading Clients ####
> client localhost {
> ipaddr = 127.0.0.1
> require_message_authenticator = no
> secret = <<< secret >>>
> nas_type = "other"
> proto = "*"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> client localhost_ipv6 {
> ipv6addr = ::1
> require_message_authenticator = no
> secret = <<< secret >>>
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> client 192.168.100.0/24 {
> require_message_authenticator = no
> secret = <<< secret >>>
> shortname = "NAS"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
> 192.168.100.0/24. Please fix your configuration
> Support for old-style clients will be removed in a future release
> Debugger not attached
> # Creating Auth-Type = PAP
> # Creating Auth-Type = CHAP
> # Creating Auth-Type = MS-CHAP
> # Creating Auth-Type = eap
> # Creating Auth-Type = digest
> radiusd: #### Instantiating modules ####
> modules {
> # Loaded module rlm_mschap
> # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
> mschap {
> use_mppe = yes
> require_encryption = no
> require_strong = no
> with_ntdomain_hack = yes
> passchange {
> }
> allow_retry = yes
> }
> # Loaded module rlm_always
> # Loading module "reject" from file /etc/freeradius/mods-enabled/always
> always reject {
> rcode = "reject"
> simulcount = 0
> mpp = no
> }
> # Loading module "fail" from file /etc/freeradius/mods-enabled/always
> always fail {
> rcode = "fail"
> simulcount = 0
> mpp = no
> }
> # Loading module "ok" from file /etc/freeradius/mods-enabled/always
> always ok {
> rcode = "ok"
> simulcount = 0
> mpp = no
> }
> # Loading module "handled" from file /etc/freeradius/mods-enabled/always
> always handled {
> rcode = "handled"
> simulcount = 0
> mpp = no
> }
> # Loading module "invalid" from file /etc/freeradius/mods-enabled/always
> always invalid {
> rcode = "invalid"
> simulcount = 0
> mpp = no
> }
> # Loading module "userlock" from file /etc/freeradius/mods-enabled/always
> always userlock {
> rcode = "userlock"
> simulcount = 0
> mpp = no
> }
> # Loading module "notfound" from file /etc/freeradius/mods-enabled/always
> always notfound {
> rcode = "notfound"
> simulcount = 0
> mpp = no
> }
> # Loading module "noop" from file /etc/freeradius/mods-enabled/always
> always noop {
> rcode = "noop"
> simulcount = 0
> mpp = no
> }
> # Loading module "updated" from file /etc/freeradius/mods-enabled/always
> always updated {
> rcode = "updated"
> simulcount = 0
> mpp = no
> }
> # Loaded module rlm_soh
> # Loading module "soh" from file /etc/freeradius/mods-enabled/soh
> soh {
> dhcp = yes
> }
> # Loaded module rlm_eap
> # Loading module "eap" from file /etc/freeradius/mods-enabled/eap
> eap {
> default_eap_type = "md5"
> timer_expire = 60
> ignore_unknown_eap_types = no
> cisco_accounting_username_bug = no
> max_sessions = 16384
> }
> # Loaded module rlm_dynamic_clients
> # Loading module "dynamic_clients" from file
> /etc/freeradius/mods-enabled/dynamic_clients
> # Loaded module rlm_logintime
> # Loading module "logintime" from file
> /etc/freeradius/mods-enabled/logintime
> logintime {
> minimum_timeout = 60
> }
> # Loaded module rlm_exec
> # Loading module "exec" from file /etc/freeradius/mods-enabled/exec
> exec {
> wait = no
> input_pairs = "request"
> shell_escape = yes
> timeout = 10
> }
> # Loaded module rlm_realm
> # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
> realm IPASS {
> format = "prefix"
> delimiter = "/"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
> realm suffix {
> format = "suffix"
> delimiter = "@"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "realmpercent" from file
> /etc/freeradius/mods-enabled/realm
> realm realmpercent {
> format = "suffix"
> delimiter = "%"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
> realm ntdomain {
> format = "prefix"
> delimiter = "\\"
> ignore_default = no
> ignore_null = no
> }
> # Loaded module rlm_utf8
> # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
> # Loading module "echo" from file /etc/freeradius/mods-enabled/echo
> exec echo {
> wait = yes
> program = "/bin/echo %{User-Name}"
> input_pairs = "request"
> output_pairs = "reply"
> shell_escape = yes
> }
> # Loaded module rlm_unix
> # Loading module "unix" from file /etc/freeradius/mods-enabled/unix
> unix {
> radwtmp = "/var/log/freeradius/radwtmp"
> }
> Creating attribute Unix-Group
> # Loaded module rlm_detail
> # Loading module "auth_log" from file
> /etc/freeradius/mods-enabled/detail.log
> detail auth_log {
> filename =
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "reply_log" from file
> /etc/freeradius/mods-enabled/detail.log
> detail reply_log {
> filename =
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "pre_proxy_log" from file
> /etc/freeradius/mods-enabled/detail.log
> detail pre_proxy_log {
> filename =
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "post_proxy_log" from file
> /etc/freeradius/mods-enabled/detail.log
> detail post_proxy_log {
> filename =
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loaded module rlm_expr
> # Loading module "expr" from file /etc/freeradius/mods-enabled/expr
> expr {
> safe_characters =
> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
> /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
> }
> # Loading module "ntlm_auth" from file
> /etc/freeradius/mods-enabled/ntlm_auth
> exec ntlm_auth {
> wait = yes
> program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
> --username=%{mschap:User-Name} --password=%{User-Password}"
> shell_escape = yes
> }
> # Loaded module rlm_pap
> # Loading module "pap" from file /etc/freeradius/mods-enabled/pap
> pap {
> normalise = yes
> }
> # Loaded module rlm_ldap
> # Loading module "ldap" from file /etc/freeradius/mods-enabled/ldap
> ldap {
> server = "localhost"
> identity = "cn=admin,dc=seminary,dc=local"
> password = <<< secret >>>
> sasl {
> }
> user {
> scope = "sub"
> access_positive = yes
> sasl {
> }
> }
> group {
> filter = "(objectClass=posixGroup)"
> scope = "sub"
> name_attribute = "cn"
> membership_attribute = "memberOf"
> cacheable_name = no
> cacheable_dn = no
> }
> client {
> filter = "(objectClass=radiusClient)"
> scope = "sub"
> base_dn = "ou=SeminaryOU,dc=seminary,dc=local"
> }
> profile {
> }
> options {
> ldap_debug = 40
> chase_referrals = yes
> rebind = yes
> net_timeout = 1
> res_timeout = 10
> srv_timelimit = 3
> idle = 60
> probes = 3
> interval = 3
> }
> tls {
> start_tls = no
> }
> }
> Creating attribute LDAP-Group
> # Loaded module rlm_digest
> # Loading module "digest" from file /etc/freeradius/mods-enabled/digest
> # Loaded module rlm_files
> # Loading module "files" from file /etc/freeradius/mods-enabled/files
> files {
> filename = "/etc/freeradius/mods-config/files/authorize"
> acctusersfile = "/etc/freeradius/mods-config/files/accounting"
> preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
> }
> # Loaded module rlm_preprocess
> # Loading module "preprocess" from file
> /etc/freeradius/mods-enabled/preprocess
> preprocess {
> huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
> hints = "/etc/freeradius/mods-config/preprocess/hints"
> with_ascend_hack = no
> ascend_channels_per_line = 23
> with_ntdomain_hack = no
> with_specialix_jetstream_hack = no
> with_cisco_vsa_hack = no
> with_alvarion_vsa_hack = no
> }
> # Loaded module rlm_cache
> # Loading module "cache_eap" from file
> /etc/freeradius/mods-enabled/cache_eap
> cache cache_eap {
> driver = "rlm_cache_rbtree"
> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
> ttl = 15
> max_entries = 0
> epoch = 0
> add_stats = no
> }
> # Loading module "detail" from file /etc/freeradius/mods-enabled/detail
> detail {
> filename =
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loaded module rlm_expiration
> # Loading module "expiration" from file
> /etc/freeradius/mods-enabled/expiration
> # Loaded module rlm_chap
> # Loading module "chap" from file /etc/freeradius/mods-enabled/chap
> # Loaded module rlm_radutmp
> # Loading module "sradutmp" from file
> /etc/freeradius/mods-enabled/sradutmp
> radutmp sradutmp {
> filename = "/var/log/freeradius/sradutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 420
> caller_id = no
> }
> # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp
> radutmp {
> filename = "/var/log/freeradius/radutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 384
> caller_id = yes
> }
> # Loaded module rlm_passwd
> # Loading module "etc_passwd" from file
> /etc/freeradius/mods-enabled/passwd
> passwd etc_passwd {
> filename = "/etc/passwd"
> format = "*User-Name:Crypt-Password:"
> delimiter = ":"
> ignore_nislike = no
> ignore_empty = yes
> allow_multiple_keys = no
> hash_size = 100
> }
> # Loaded module rlm_linelog
> # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog
> linelog {
> filename = "/var/log/freeradius/linelog"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = "This is a log message for %{User-Name}"
> reference = "messages.%{%{reply:Packet-Type}:-default}"
> }
> # Loading module "log_accounting" from file
> /etc/freeradius/mods-enabled/linelog
> linelog log_accounting {
> filename = "/var/log/freeradius/linelog-accounting"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = ""
> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
> }
> # Loaded module rlm_unpack
> # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
> # Loaded module rlm_attr_filter
> # Loading module "attr_filter.post-proxy" from file
> /etc/freeradius/mods-enabled/attr_filter
> attr_filter attr_filter.post-proxy {
> filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.pre-proxy" from file
> /etc/freeradius/mods-enabled/attr_filter
> attr_filter attr_filter.pre-proxy {
> filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.access_reject" from file
> /etc/freeradius/mods-enabled/attr_filter
> attr_filter attr_filter.access_reject {
> filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.access_challenge" from file
> /etc/freeradius/mods-enabled/attr_filter
> attr_filter attr_filter.access_challenge {
> filename =
> "/etc/freeradius/mods-config/attr_filter/access_challenge"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.accounting_response" from file
> /etc/freeradius/mods-enabled/attr_filter
> attr_filter attr_filter.accounting_response {
> filename =
> "/etc/freeradius/mods-config/attr_filter/accounting_response"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loaded module rlm_replicate
> # Loading module "replicate" from file
> /etc/freeradius/mods-enabled/replicate
> instantiate {
> }
> # Instantiating module "mschap" from file
> /etc/freeradius/mods-enabled/mschap
> rlm_mschap (mschap): using internal authentication
> # Instantiating module "reject" from file
> /etc/freeradius/mods-enabled/always
> # Instantiating module "fail" from file
> /etc/freeradius/mods-enabled/always
> # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always
> # Instantiating module "handled" from file
> /etc/freeradius/mods-enabled/always
> # Instantiating module "invalid" from file
> /etc/freeradius/mods-enabled/always
> # Instantiating module "userlock" from file
> /etc/freeradius/mods-enabled/always
> # Instantiating module "notfound" from file
> /etc/freeradius/mods-enabled/always
> # Instantiating module "noop" from file
> /etc/freeradius/mods-enabled/always
> # Instantiating module "updated" from file
> /etc/freeradius/mods-enabled/always
> # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
> # Linked to sub-module rlm_eap_md5
> # Linked to sub-module rlm_eap_leap
> # Linked to sub-module rlm_eap_gtc
> gtc {
> challenge = "Password: "
> auth_type = "PAP"
> }
> # Linked to sub-module rlm_eap_tls
> tls {
> tls = "tls-common"
> }
> tls-config tls-common {
> verify_depth = 0
> ca_path = "/etc/freeradius/certs"
> pem_file_type = yes
> private_key_file = "/etc/freeradius/certs/server.pem"
> certificate_file = "/etc/freeradius/certs/server.pem"
> ca_file = "/etc/freeradius/certs/ca.pem"
> private_key_password = <<< secret >>>
> dh_file = "/etc/freeradius/certs/dh"
> random_file = "/dev/urandom"
> fragment_size = 1024
> include_length = yes
> auto_chain = yes
> check_crl = no
> check_all_crl = no
> cipher_list = "DEFAULT"
> ecdh_curve = "prime256v1"
> cache {
> enable = yes
> lifetime = 24
> max_entries = 255
> }
> verify {
> skip_if_ocsp_ok = no
> }
> ocsp {
> enable = no
> override_cert_url = yes
> url = "http://127.0.0.1/ocsp/"
> use_nonce = yes
> timeout = 0
> softfail = no
> }
> }
> # Linked to sub-module rlm_eap_ttls
> ttls {
> tls = "tls-common"
> default_eap_type = "md5"
> copy_request_to_tunnel = no
> use_tunneled_reply = yes
> virtual_server = "inner-tunnel"
> include_length = yes
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_peap
> peap {
> tls = "tls-common"
> default_eap_type = "mschapv2"
> copy_request_to_tunnel = no
> use_tunneled_reply = yes
> proxy_tunneled_request_as_eap = yes
> virtual_server = "inner-tunnel"
> soh = no
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_mschapv2
> mschapv2 {
> with_ntdomain_hack = no
> send_error = no
> }
> # Instantiating module "logintime" from file
> /etc/freeradius/mods-enabled/logintime
> # Instantiating module "IPASS" from file
> /etc/freeradius/mods-enabled/realm
> # Instantiating module "suffix" from file
> /etc/freeradius/mods-enabled/realm
> # Instantiating module "realmpercent" from file
> /etc/freeradius/mods-enabled/realm
> # Instantiating module "ntdomain" from file
> /etc/freeradius/mods-enabled/realm
> # Instantiating module "auth_log" from file
> /etc/freeradius/mods-enabled/detail.log
> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
> detail output
> # Instantiating module "reply_log" from file
> /etc/freeradius/mods-enabled/detail.log
> # Instantiating module "pre_proxy_log" from file
> /etc/freeradius/mods-enabled/detail.log
> # Instantiating module "post_proxy_log" from file
> /etc/freeradius/mods-enabled/detail.log
> # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
> # Instantiating module "ldap" from file /etc/freeradius/mods-enabled/ldap
> rlm_ldap: libldap vendor: OpenLDAP, version: 20442
> accounting {
> reference = "%{tolower:type.%{Acct-Status-Type}}"
> }
> post-auth {
> reference = "."
> }
> rlm_ldap (ldap): Initialising connection pool
> pool {
> start = 5
> min = 3
> max = 32
> spare = 10
> uses = 0
> lifetime = 0
> cleanup_interval = 30
> idle_timeout = 60
> retry_delay = 30
> spread = no
> }
> rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://localhost:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://localhost:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://localhost:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://localhost:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://localhost:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> # Instantiating module "files" from file
> /etc/freeradius/mods-enabled/files
> reading pairlist file /etc/freeradius/mods-config/files/authorize
> reading pairlist file /etc/freeradius/mods-config/files/accounting
> reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
> # Instantiating module "preprocess" from file
> /etc/freeradius/mods-enabled/preprocess
> reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
> reading pairlist file /etc/freeradius/mods-config/preprocess/hints
> # Instantiating module "cache_eap" from file
> /etc/freeradius/mods-enabled/cache_eap
> rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
> loaded and linked
> # Instantiating module "detail" from file
> /etc/freeradius/mods-enabled/detail
> # Instantiating module "expiration" from file
> /etc/freeradius/mods-enabled/expiration
> # Instantiating module "etc_passwd" from file
> /etc/freeradius/mods-enabled/passwd
> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> # Instantiating module "linelog" from file
> /etc/freeradius/mods-enabled/linelog
> # Instantiating module "log_accounting" from file
> /etc/freeradius/mods-enabled/linelog
> # Instantiating module "attr_filter.post-proxy" from file
> /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
> # Instantiating module "attr_filter.pre-proxy" from file
> /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
> # Instantiating module "attr_filter.access_reject" from file
> /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject
> [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item
> "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
> [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item
> "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
> # Instantiating module "attr_filter.access_challenge" from file
> /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file
> /etc/freeradius/mods-config/attr_filter/access_challenge
> # Instantiating module "attr_filter.accounting_response" from file
> /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file
> /etc/freeradius/mods-config/attr_filter/accounting_response
> } # modules
> radiusd: #### Loading Virtual Servers ####
> server { # from file /etc/freeradius/radiusd.conf
> } # server
> server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
> # Loading authenticate {...}
> # Loading authorize {...}
> # Loading session {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> Ignoring "sql" (see raddb/mods-available/README.rst)
> } # server inner-tunnel
> server default { # from file /etc/freeradius/sites-enabled/default
> # Loading authenticate {...}
> # Loading authorize {...}
> # Loading preacct {...}
> # Loading accounting {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> } # server default
> radiusd: #### Opening IP addresses and Ports ####
> listen {
> type = "auth"
> ipaddr = 127.0.0.1
> port = 18120
> }
> listen {
> type = "auth"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "auth"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
> Listening on auth address * port 1812 bound to server default
> Listening on acct address * port 1813 bound to server default
> Listening on auth address :: port 1812 bound to server default
> Listening on acct address :: port 1813 bound to server default
> Listening on proxy address * port 38374
> Listening on proxy address :: port 37379
> Ready to process requests
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> (0) Received Access-Request Id 9 from 192.168.100.110:52775 to
> 192.168.100.201:1812 length 165
> (0) User-Name = "mpulis"
> (0) NAS-Identifier = "802aa849c3a3"
> (0) NAS-Port = 0
> (0) Called-Station-Id = "82-2A-A8-4B-C3-A3:SeminaryWiFi"
> (0) Calling-Station-Id = "B0-DF-3A-7C-23-5E"
> (0) Framed-MTU = 1400
> (0) NAS-Port-Type = Wireless-802.11
> (0) Connect-Info = "CONNECT 0Mbps 802.11b"
> (0) EAP-Message = 0x02ba000b016d70756c6973
> (0) Message-Authenticator = 0xaaef39af5f9edef0ef2ad9504b9c5bb0
> (0) # Executing section authorize from file
> /etc/freeradius/sites-enabled/default
> (0) authorize {
> (0) policy filter_username {
> (0) if (&User-Name) {
> (0) if (&User-Name) -> TRUE
> (0) if (&User-Name) {
> (0) if (&User-Name =~ / /) {
> (0) if (&User-Name =~ / /) -> FALSE
> (0) if (&User-Name =~ /@[^@]*@/ ) {
> (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (0) if (&User-Name =~ /\.\./ ) {
> (0) if (&User-Name =~ /\.\./ ) -> FALSE
> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
> FALSE
> (0) if (&User-Name =~ /\.$/) {
> (0) if (&User-Name =~ /\.$/) -> FALSE
> (0) if (&User-Name =~ /@\./) {
> (0) if (&User-Name =~ /@\./) -> FALSE
> (0) } # if (&User-Name) = notfound
> (0) } # policy filter_username = notfound
> (0) [preprocess] = ok
> (0) [chap] = noop
> (0) [mschap] = noop
> (0) suffix: Checking for suffix after "@"
> (0) suffix: No '@' in User-Name = "mpulis", looking up realm NULL
> (0) suffix: No such realm "NULL"
> (0) [suffix] = noop
> (0) eap: Peer sent EAP Response (code 2) ID 186 length 11
> (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
> rest of authorize
> (0) [eap] = ok
> (0) } # authorize = ok
> (0) Found Auth-Type = eap
> (0) # Executing group from file /etc/freeradius/sites-enabled/default
> (0) authenticate {
> (0) eap: Peer sent packet with method EAP Identity (1)
> (0) eap: Calling submodule eap_md5 to process data
> (0) eap_md5: Issuing MD5 Challenge
> (0) eap: Sending EAP Request (code 1) ID 187 length 22
> (0) eap: EAP session adding &reply:State = 0x104c8eb010f78ae8
> (0) [eap] = handled
> (0) } # authenticate = handled
> (0) Using Post-Auth-Type Challenge
> (0) Post-Auth-Type sub-section not found. Ignoring.
> (0) # Executing group from file /etc/freeradius/sites-enabled/default
> (0) Sent Access-Challenge Id 9 from 192.168.100.201:1812 to
> 192.168.100.110:52775 length 0
> (0) EAP-Message = 0x01bb00160410348177de91c185206602fa64ec1f1d91
> (0) Message-Authenticator = 0x00000000000000000000000000000000
> (0) State = 0x104c8eb010f78ae8aa68bc37dd34ca62
> (0) Finished request
> Waking up in 4.9 seconds.
> (1) Received Access-Request Id 10 from 192.168.100.110:52775 to
> 192.168.100.201:1812 length 178
> (1) User-Name = "mpulis"
> (1) NAS-Identifier = "802aa849c3a3"
> (1) NAS-Port = 0
> (1) Called-Station-Id = "82-2A-A8-4B-C3-A3:SeminaryWiFi"
> (1) Calling-Station-Id = "B0-DF-3A-7C-23-5E"
> (1) Framed-MTU = 1400
> (1) NAS-Port-Type = Wireless-802.11
> (1) Connect-Info = "CONNECT 0Mbps 802.11b"
> (1) EAP-Message = 0x02bb00060315
> (1) State = 0x104c8eb010f78ae8aa68bc37dd34ca62
> (1) Message-Authenticator = 0x2135a54adb340c1b4102b16da3655606
> (1) session-state: No cached attributes
> (1) # Executing section authorize from file
> /etc/freeradius/sites-enabled/default
> (1) authorize {
> (1) policy filter_username {
> (1) if (&User-Name) {
> (1) if (&User-Name) -> TRUE
> (1) if (&User-Name) {
> (1) if (&User-Name =~ / /) {
> (1) if (&User-Name =~ / /) -> FALSE
> (1) if (&User-Name =~ /@[^@]*@/ ) {
> (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (1) if (&User-Name =~ /\.\./ ) {
> (1) if (&User-Name =~ /\.\./ ) -> FALSE
> (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
> FALSE
> (1) if (&User-Name =~ /\.$/) {
> (1) if (&User-Name =~ /\.$/) -> FALSE
> (1) if (&User-Name =~ /@\./) {
> (1) if (&User-Name =~ /@\./) -> FALSE
> (1) } # if (&User-Name) = notfound
> (1) } # policy filter_username = notfound
> (1) [preprocess] = ok
> (1) [chap] = noop
> (1) [mschap] = noop
> (1) suffix: Checking for suffix after "@"
> (1) suffix: No '@' in User-Name = "mpulis", looking up realm NULL
> (1) suffix: No such realm "NULL"
> (1) [suffix] = noop
> (1) eap: Peer sent EAP Response (code 2) ID 187 length 6
> (1) eap: No EAP Start, assuming it's an on-going EAP conversation
> (1) [eap] = updated
> (1) [files] = noop
> rlm_ldap (ldap): Reserved connection (0)
> (1) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
> (1) ldap: --> (cn=mpulis)
> (1) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with
> filter "(cn=mpulis)", scope "sub"
> (1) ldap: Waiting for search result...
> (1) ldap: User object found at DN
> "cn=mpulis,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
> (1) ldap: Processing user attributes
> (1) ldap: control:Password-With-Header +=
> '{ssha}VlINJtlRL+9CuOK5itOeTIvRfwKRSNj9xllpiQ=='
> rlm_ldap (ldap): Released connection (0)
> rlm_ldap (ldap): Need 5 more connections to reach 10 spares
> rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://localhost:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> (1) [ldap] = updated
> (1) [expiration] = noop
> (1) [logintime] = noop
> (1) pap: Converted: Password-With-Header -> SSHA1-Password
> (1) pap: Removing &control:Password-With-Header
> (1) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28
> bytes
> (1) pap: WARNING: Auth-Type already set. Not setting to PAP
> (1) [pap] = noop
> (1) } # authorize = updated
> (1) Found Auth-Type = eap
> (1) # Executing group from file /etc/freeradius/sites-enabled/default
> (1) authenticate {
> (1) eap: Expiring EAP session with state 0x104c8eb010f78ae8
> (1) eap: Finished EAP session with state 0x104c8eb010f78ae8
> (1) eap: Previous EAP request found for state 0x104c8eb010f78ae8, released
> from the list
> (1) eap: Peer sent packet with method EAP NAK (3)
> (1) eap: Found mutually acceptable type TTLS (21)
> (1) eap: Calling submodule eap_ttls to process data
> (1) eap_ttls: Initiating new EAP-TLS session
> (1) eap_ttls: Flushing SSL sessions (of #0)
> (1) eap_ttls: [eaptls start] = request
> (1) eap: Sending EAP Request (code 1) ID 188 length 6
> (1) eap: EAP session adding &reply:State = 0x104c8eb011f09be8
> (1) [eap] = handled
> (1) } # authenticate = handled
> (1) Using Post-Auth-Type Challenge
> (1) Post-Auth-Type sub-section not found. Ignoring.
> (1) # Executing group from file /etc/freeradius/sites-enabled/default
> (1) Sent Access-Challenge Id 10 from 192.168.100.201:1812 to
> 192.168.100.110:52775 length 0
> (1) EAP-Message = 0x01bc00061520
> (1) Message-Authenticator = 0x00000000000000000000000000000000
> (1) State = 0x104c8eb011f09be8aa68bc37dd34ca62
> (1) Finished request
> Waking up in 4.9 seconds.
> (2) Received Access-Request Id 11 from 192.168.100.110:52775 to
> 192.168.100.201:1812 length 364
> (2) User-Name = "mpulis"
> (2) NAS-Identifier = "802aa849c3a3"
> (2) NAS-Port = 0
> (2) Called-Station-Id = "82-2A-A8-4B-C3-A3:SeminaryWiFi"
> (2) Calling-Station-Id = "B0-DF-3A-7C-23-5E"
> (2) Framed-MTU = 1400
> (2) NAS-Port-Type = Wireless-802.11
> (2) Connect-Info = "CONNECT 0Mbps 802.11b"
> (2) EAP-Message =
> 0x02bc00c0150016030100b5010000b10301635e04e1f20347ded5351b49fab63311368cc67eb2b49527653206d0cb46db62000048c014c00a00390038c00fc0050035c013c00900330032c00ec004002fc011c007c00cc00200050004c012c00800160013c00dc003000a00150012000900140011000800
> (2) State = 0x104c8eb011f09be8aa68bc37dd34ca62
> (2) Message-Authenticator = 0xc2a0353f1c22341ba7578ac17036fafb
> (2) session-state: No cached attributes
> (2) # Executing section authorize from file
> /etc/freeradius/sites-enabled/default
> (2) authorize {
> (2) policy filter_username {
> (2) if (&User-Name) {
> (2) if (&User-Name) -> TRUE
> (2) if (&User-Name) {
> (2) if (&User-Name =~ / /) {
> (2) if (&User-Name =~ / /) -> FALSE
> (2) if (&User-Name =~ /@[^@]*@/ ) {
> (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (2) if (&User-Name =~ /\.\./ ) {
> (2) if (&User-Name =~ /\.\./ ) -> FALSE
> (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
> FALSE
> (2) if (&User-Name =~ /\.$/) {
> (2) if (&User-Name =~ /\.$/) -> FALSE
> (2) if (&User-Name =~ /@\./) {
> (2) if (&User-Name =~ /@\./) -> FALSE
> (2) } # if (&User-Name) = notfound
> (2) } # policy filter_username = notfound
> (2) [preprocess] = ok
> (2) [chap] = noop
> (2) [mschap] = noop
> (2) suffix: Checking for suffix after "@"
> (2) suffix: No '@' in User-Name = "mpulis", looking up realm NULL
> (2) suffix: No such realm "NULL"
> (2) [suffix] = noop
> (2) eap: Peer sent EAP Response (code 2) ID 188 length 192
> (2) eap: Continuing tunnel setup
> (2) [eap] = ok
> (2) } # authorize = ok
> (2) Found Auth-Type = eap
> (2) # Executing group from file /etc/freeradius/sites-enabled/default
> (2) authenticate {
> (2) eap: Expiring EAP session with state 0x104c8eb011f09be8
> (2) eap: Finished EAP session with state 0x104c8eb011f09be8
> (2) eap: Previous EAP request found for state 0x104c8eb011f09be8, released
> from the list
> (2) eap: Peer sent packet with method EAP TTLS (21)
> (2) eap: Calling submodule eap_ttls to process data
> (2) eap_ttls: Authenticate
> (2) eap_ttls: Continuing EAP-TLS
> (2) eap_ttls: [eaptls verify] = ok
> (2) eap_ttls: Done initial handshake
> (2) eap_ttls: (other): before/accept initialization
> (2) eap_ttls: TLS_accept: before/accept initialization
> (2) eap_ttls: <<< recv TLS 1.0 Handshake [length 00b5], ClientHello
> (2) eap_ttls: TLS_accept: unknown state
> (2) eap_ttls: >>> send TLS 1.0 Handshake [length 0059], ServerHello
> (2) eap_ttls: TLS_accept: unknown state
> (2) eap_ttls: >>> send TLS 1.0 Handshake [length 0973], Certificate
> (2) eap_ttls: TLS_accept: unknown state
> (2) eap_ttls: >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange
> (2) eap_ttls: TLS_accept: unknown state
> (2) eap_ttls: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone
> (2) eap_ttls: TLS_accept: unknown state
> (2) eap_ttls: TLS_accept: unknown state
> (2) eap_ttls: TLS_accept: unknown state
> (2) eap_ttls: TLS_accept: Need to read more data: unknown state
> (2) eap_ttls: TLS_accept: Need to read more data: unknown state
> (2) eap_ttls: In SSL Handshake Phase
> (2) eap_ttls: In SSL Accept mode
> (2) eap_ttls: [eaptls process] = handled
> (2) eap: Sending EAP Request (code 1) ID 189 length 1004
> (2) eap: EAP session adding &reply:State = 0x104c8eb012f19be8
> (2) [eap] = handled
> (2) } # authenticate = handled
> (2) Using Post-Auth-Type Challenge
> (2) Post-Auth-Type sub-section not found. Ignoring.
> (2) # Executing group from file /etc/freeradius/sites-enabled/default
> (2) Sent Access-Challenge Id 11 from 192.168.100.201:1812 to
> 192.168.100.110:52775 length 0
> (2) EAP-Message =
> 0x01bd03ec15c000000b2f160301005902000055030133073b184afb1feef297f3164815c21099158983f83ee7f25eb3821fd31703f720c599ffe4eaa786771dc7974e667498641e729025b153959071566d3fe4ec6e25c01400000dff01000100000b00040300010216030109730b00096f00096c000420
> (2) Message-Authenticator = 0x00000000000000000000000000000000
> (2) State = 0x104c8eb012f19be8aa68bc37dd34ca62
> (2) Finished request
> Waking up in 4.9 seconds.
> (3) Received Access-Request Id 12 from 192.168.100.110:52775 to
> 192.168.100.201:1812 length 178
> (3) User-Name = "mpulis"
> (3) NAS-Identifier = "802aa849c3a3"
> (3) NAS-Port = 0
> (3) Called-Station-Id = "82-2A-A8-4B-C3-A3:SeminaryWiFi"
> (3) Calling-Station-Id = "B0-DF-3A-7C-23-5E"
> (3) Framed-MTU = 1400
> (3) NAS-Port-Type = Wireless-802.11
> (3) Connect-Info = "CONNECT 0Mbps 802.11b"
> (3) EAP-Message = 0x02bd00061500
> (3) State = 0x104c8eb012f19be8aa68bc37dd34ca62
> (3) Message-Authenticator = 0xd8215c926890c9999a95385be24f1710
> (3) session-state: No cached attributes
> (3) # Executing section authorize from file
> /etc/freeradius/sites-enabled/default
> (3) authorize {
> (3) policy filter_username {
> (3) if (&User-Name) {
> (3) if (&User-Name) -> TRUE
> (3) if (&User-Name) {
> (3) if (&User-Name =~ / /) {
> (3) if (&User-Name =~ / /) -> FALSE
> (3) if (&User-Name =~ /@[^@]*@/ ) {
> (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (3) if (&User-Name =~ /\.\./ ) {
> (3) if (&User-Name =~ /\.\./ ) -> FALSE
> (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
> FALSE
> (3) if (&User-Name =~ /\.$/) {
> (3) if (&User-Name =~ /\.$/) -> FALSE
> (3) if (&User-Name =~ /@\./) {
> (3) if (&User-Name =~ /@\./) -> FALSE
> (3) } # if (&User-Name) = notfound
> (3) } # policy filter_username = notfound
> (3) [preprocess] = ok
> (3) [chap] = noop
> (3) [mschap] = noop
> (3) suffix: Checking for suffix after "@"
> (3) suffix: No '@' in User-Name = "mpulis", looking up realm NULL
> (3) suffix: No such realm "NULL"
> (3) [suffix] = noop
> (3) eap: Peer sent EAP Response (code 2) ID 189 length 6
> (3) eap: Continuing tunnel setup
> (3) [eap] = ok
> (3) } # authorize = ok
> (3) Found Auth-Type = eap
> (3) # Executing group from file /etc/freeradius/sites-enabled/default
> (3) authenticate {
> (3) eap: Expiring EAP session with state 0x104c8eb012f19be8
> (3) eap: Finished EAP session with state 0x104c8eb012f19be8
> (3) eap: Previous EAP request found for state 0x104c8eb012f19be8, released
> from the list
> (3) eap: Peer sent packet with method EAP TTLS (21)
> (3) eap: Calling submodule eap_ttls to process data
> (3) eap_ttls: Authenticate
> (3) eap_ttls: Continuing EAP-TLS
> (3) eap_ttls: Peer ACKed our handshake fragment
> (3) eap_ttls: [eaptls verify] = request
> (3) eap_ttls: [eaptls process] = handled
> (3) eap: Sending EAP Request (code 1) ID 190 length 1004
> (3) eap: EAP session adding &reply:State = 0x104c8eb013f29be8
> (3) [eap] = handled
> (3) } # authenticate = handled
> (3) Using Post-Auth-Type Challenge
> (3) Post-Auth-Type sub-section not found. Ignoring.
> (3) # Executing group from file /etc/freeradius/sites-enabled/default
> (3) Sent Access-Challenge Id 12 from 192.168.100.201:1812 to
> 192.168.100.110:52775 length 0
> (3) EAP-Message =
> 0x01be03ec15c000000b2fb3d95dd2ed6bc14f8008ac4ccb42e7eb0200a8d70b9a3d9e451cf4e0f645302d933d25af330480c89609c676a8b21f5463d0d83293c3d96e1f52034ec62a147f95d27b9a6f34ab0a97a3b7a366601166a86c0409ece2b9ddc79831d2c39f79903774d273ae6afca66797b43da5
> (3) Message-Authenticator = 0x00000000000000000000000000000000
> (3) State = 0x104c8eb013f29be8aa68bc37dd34ca62
> (3) Finished request
> Waking up in 4.9 seconds.
> (4) Received Access-Request Id 13 from 192.168.100.110:52775 to
> 192.168.100.201:1812 length 178
> (4) User-Name = "mpulis"
> (4) NAS-Identifier = "802aa849c3a3"
> (4) NAS-Port = 0
> (4) Called-Station-Id = "82-2A-A8-4B-C3-A3:SeminaryWiFi"
> (4) Calling-Station-Id = "B0-DF-3A-7C-23-5E"
> (4) Framed-MTU = 1400
> (4) NAS-Port-Type = Wireless-802.11
> (4) Connect-Info = "CONNECT 0Mbps 802.11b"
> (4) EAP-Message = 0x02be00061500
> (4) State = 0x104c8eb013f29be8aa68bc37dd34ca62
> (4) Message-Authenticator = 0x15d667f1ad7c6d5a1a586f2c8be1eb53
> (4) session-state: No cached attributes
> (4) # Executing section authorize from file
> /etc/freeradius/sites-enabled/default
> (4) authorize {
> (4) policy filter_username {
> (4) if (&User-Name) {
> (4) if (&User-Name) -> TRUE
> (4) if (&User-Name) {
> (4) if (&User-Name =~ / /) {
> (4) if (&User-Name =~ / /) -> FALSE
> (4) if (&User-Name =~ /@[^@]*@/ ) {
> (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (4) if (&User-Name =~ /\.\./ ) {
> (4) if (&User-Name =~ /\.\./ ) -> FALSE
> (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
> FALSE
> (4) if (&User-Name =~ /\.$/) {
> (4) if (&User-Name =~ /\.$/) -> FALSE
> (4) if (&User-Name =~ /@\./) {
> (4) if (&User-Name =~ /@\./) -> FALSE
> (4) } # if (&User-Name) = notfound
> (4) } # policy filter_username = notfound
> (4) [preprocess] = ok
> (4) [chap] = noop
> (4) [mschap] = noop
> (4) suffix: Checking for suffix after "@"
> (4) suffix: No '@' in User-Name = "mpulis", looking up realm NULL
> (4) suffix: No such realm "NULL"
> (4) [suffix] = noop
> (4) eap: Peer sent EAP Response (code 2) ID 190 length 6
> (4) eap: Continuing tunnel setup
> (4) [eap] = ok
> (4) } # authorize = ok
> (4) Found Auth-Type = eap
> (4) # Executing group from file /etc/freeradius/sites-enabled/default
> (4) authenticate {
> (4) eap: Expiring EAP session with state 0x104c8eb013f29be8
> (4) eap: Finished EAP session with state 0x104c8eb013f29be8
> (4) eap: Previous EAP request found for state 0x104c8eb013f29be8, released
> from the list
> (4) eap: Peer sent packet with method EAP TTLS (21)
> (4) eap: Calling submodule eap_ttls to process data
> (4) eap_ttls: Authenticate
> (4) eap_ttls: Continuing EAP-TLS
> (4) eap_ttls: Peer ACKed our handshake fragment
> (4) eap_ttls: [eaptls verify] = request
> (4) eap_ttls: [eaptls process] = handled
> (4) eap: Sending EAP Request (code 1) ID 191 length 885
> (4) eap: EAP session adding &reply:State = 0x104c8eb014f39be8
> (4) [eap] = handled
> (4) } # authenticate = handled
> (4) Using Post-Auth-Type Challenge
> (4) Post-Auth-Type sub-section not found. Ignoring.
> (4) # Executing group from file /etc/freeradius/sites-enabled/default
> (4) Sent Access-Challenge Id 13 from 192.168.100.201:1812 to
> 192.168.100.110:52775 length 0
> (4) EAP-Message =
> 0x01bf0375158000000b2f13024d54310e300c06035504080c0552616261743112301006035504070c0954616c2d566972747531223020060355040a0c195468652041726368626973686f70732053656d696e6172792e3128302606092a864886f70d0109011619746563686e6963616c4073656d696e61
> (4) Message-Authenticator = 0x00000000000000000000000000000000
> (4) State = 0x104c8eb014f39be8aa68bc37dd34ca62
> (4) Finished request
> Waking up in 4.9 seconds.
> (5) Received Access-Request Id 14 from 192.168.100.110:52775 to
> 192.168.100.201:1812 length 312
> (5) User-Name = "mpulis"
> (5) NAS-Identifier = "802aa849c3a3"
> (5) NAS-Port = 0
> (5) Called-Station-Id = "82-2A-A8-4B-C3-A3:SeminaryWiFi"
> (5) Calling-Station-Id = "B0-DF-3A-7C-23-5E"
> (5) Framed-MTU = 1400
> (5) NAS-Port-Type = Wireless-802.11
> (5) Connect-Info = "CONNECT 0Mbps 802.11b"
> (5) EAP-Message =
> 0x02bf008c150016030100461000004241044ee56b6f046cd16b73ae61e224938e5bb3f38ecadac2fd7a2ea97c2de6ea60885cddc0684187a05ff85c680993523a0b6582479493337b6bace1e0e9fb4d3dce140301000101160301003071587e3731e84b9e00b808d0287db676e633baabd13d2afb5c6f2d
> (5) State = 0x104c8eb014f39be8aa68bc37dd34ca62
> (5) Message-Authenticator = 0x761590df4f7736aa3eba48c638fc867c
> (5) session-state: No cached attributes
> (5) # Executing section authorize from file
> /etc/freeradius/sites-enabled/default
> (5) authorize {
> (5) policy filter_username {
> (5) if (&User-Name) {
> (5) if (&User-Name) -> TRUE
> (5) if (&User-Name) {
> (5) if (&User-Name =~ / /) {
> (5) if (&User-Name =~ / /) -> FALSE
> (5) if (&User-Name =~ /@[^@]*@/ ) {
> (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (5) if (&User-Name =~ /\.\./ ) {
> (5) if (&User-Name =~ /\.\./ ) -> FALSE
> (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
> FALSE
> (5) if (&User-Name =~ /\.$/) {
> (5) if (&User-Name =~ /\.$/) -> FALSE
> (5) if (&User-Name =~ /@\./) {
> (5) if (&User-Name =~ /@\./) -> FALSE
> (5) } # if (&User-Name) = notfound
> (5) } # policy filter_username = notfound
> (5) [preprocess] = ok
> (5) [chap] = noop
> (5) [mschap] = noop
> (5) suffix: Checking for suffix after "@"
> (5) suffix: No '@' in User-Name = "mpulis", looking up realm NULL
> (5) suffix: No such realm "NULL"
> (5) [suffix] = noop
> (5) eap: Peer sent EAP Response (code 2) ID 191 length 140
> (5) eap: Continuing tunnel setup
> (5) [eap] = ok
> (5) } # authorize = ok
> (5) Found Auth-Type = eap
> (5) # Executing group from file /etc/freeradius/sites-enabled/default
> (5) authenticate {
> (5) eap: Expiring EAP session with state 0x104c8eb014f39be8
> (5) eap: Finished EAP session with state 0x104c8eb014f39be8
> (5) eap: Previous EAP request found for state 0x104c8eb014f39be8, released
> from the list
> (5) eap: Peer sent packet with method EAP TTLS (21)
> (5) eap: Calling submodule eap_ttls to process data
> (5) eap_ttls: Authenticate
> (5) eap_ttls: Continuing EAP-TLS
> (5) eap_ttls: [eaptls verify] = ok
> (5) eap_ttls: Done initial handshake
> (5) eap_ttls: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange
> (5) eap_ttls: TLS_accept: unknown state
> (5) eap_ttls: TLS_accept: unknown state
> (5) eap_ttls: <<< recv TLS 1.0 ChangeCipherSpec [length 0001]
> (5) eap_ttls: <<< recv TLS 1.0 Handshake [length 0010], Finished
> (5) eap_ttls: TLS_accept: unknown state
> (5) eap_ttls: >>> send TLS 1.0 ChangeCipherSpec [length 0001]
> (5) eap_ttls: TLS_accept: unknown state
> (5) eap_ttls: >>> send TLS 1.0 Handshake [length 0010], Finished
> (5) eap_ttls: TLS_accept: unknown state
> (5) eap_ttls: TLS_accept: unknown state
> (5) eap_ttls: (other): SSL negotiation finished successfully
> (5) eap_ttls: SSL Connection Established
> (5) eap_ttls: [eaptls process] = handled
> (5) eap: Sending EAP Request (code 1) ID 192 length 69
> (5) eap: EAP session adding &reply:State = 0x104c8eb0158c9be8
> (5) [eap] = handled
> (5) } # authenticate = handled
> (5) Using Post-Auth-Type Challenge
> (5) Post-Auth-Type sub-section not found. Ignoring.
> (5) # Executing group from file /etc/freeradius/sites-enabled/default
> (5) Sent Access-Challenge Id 14 from 192.168.100.201:1812 to
> 192.168.100.110:52775 length 0
> (5) EAP-Message =
> 0x01c0004515800000003b1403010001011603010030dc8e04fd7b6568f617df53ac0662a5c8936a3d8eeb99887cd9ce2751450d4ba3519d793bf500899329c30c5a1af6f30e
> (5) Message-Authenticator = 0x00000000000000000000000000000000
> (5) State = 0x104c8eb0158c9be8aa68bc37dd34ca62
> (5) Finished request
> Waking up in 4.9 seconds.
> (6) Received Access-Request Id 15 from 192.168.100.110:52775 to
> 192.168.100.201:1812 length 231
> (6) User-Name = "mpulis"
> (6) NAS-Identifier = "802aa849c3a3"
> (6) NAS-Port = 0
> (6) Called-Station-Id = "82-2A-A8-4B-C3-A3:SeminaryWiFi"
> (6) Calling-Station-Id = "B0-DF-3A-7C-23-5E"
> (6) Framed-MTU = 1400
> (6) NAS-Port-Type = Wireless-802.11
> (6) Connect-Info = "CONNECT 0Mbps 802.11b"
> (6) EAP-Message =
> 0x02c0003b15001703010030b1343fa3ee84e0aca07d87920e79429f9606b173a4399315dcf4bb44879b25742fd75d6f8d0a0a99541d81ea38f9e023
> (6) State = 0x104c8eb0158c9be8aa68bc37dd34ca62
> (6) Message-Authenticator = 0x0030d6f15d315e746b958bacf91de6ae
> (6) session-state: No cached attributes
> (6) # Executing section authorize from file
> /etc/freeradius/sites-enabled/default
> (6) authorize {
> (6) policy filter_username {
> (6) if (&User-Name) {
> (6) if (&User-Name) -> TRUE
> (6) if (&User-Name) {
> (6) if (&User-Name =~ / /) {
> (6) if (&User-Name =~ / /) -> FALSE
> (6) if (&User-Name =~ /@[^@]*@/ ) {
> (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (6) if (&User-Name =~ /\.\./ ) {
> (6) if (&User-Name =~ /\.\./ ) -> FALSE
> (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
> FALSE
> (6) if (&User-Name =~ /\.$/) {
> (6) if (&User-Name =~ /\.$/) -> FALSE
> (6) if (&User-Name =~ /@\./) {
> (6) if (&User-Name =~ /@\./) -> FALSE
> (6) } # if (&User-Name) = notfound
> (6) } # policy filter_username = notfound
> (6) [preprocess] = ok
> (6) [chap] = noop
> (6) [mschap] = noop
> (6) suffix: Checking for suffix after "@"
> (6) suffix: No '@' in User-Name = "mpulis", looking up realm NULL
> (6) suffix: No such realm "NULL"
> (6) [suffix] = noop
> (6) eap: Peer sent EAP Response (code 2) ID 192 length 59
> (6) eap: Continuing tunnel setup
> (6) [eap] = ok
> (6) } # authorize = ok
> (6) Found Auth-Type = eap
> (6) # Executing group from file /etc/freeradius/sites-enabled/default
> (6) authenticate {
> (6) eap: Expiring EAP session with state 0x104c8eb0158c9be8
> (6) eap: Finished EAP session with state 0x104c8eb0158c9be8
> (6) eap: Previous EAP request found for state 0x104c8eb0158c9be8, released
> from the list
> (6) eap: Peer sent packet with method EAP TTLS (21)
> (6) eap: Calling submodule eap_ttls to process data
> (6) eap_ttls: Authenticate
> (6) eap_ttls: Continuing EAP-TLS
> (6) eap_ttls: [eaptls verify] = ok
> (6) eap_ttls: Done initial handshake
> (6) eap_ttls: [eaptls process] = ok
> (6) eap_ttls: Session established. Proceeding to decode tunneled attributes
> (6) eap_ttls: Got tunneled request
> (6) eap_ttls: EAP-Message = 0x0200000b016d70756c6973
> (6) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1
> (6) eap_ttls: Got tunneled identity of mpulis
> (6) eap_ttls: Setting default EAP type for tunneled EAP session
> (6) eap_ttls: Sending tunneled request
> (6) Virtual server inner-tunnel received request
> (6) EAP-Message = 0x0200000b016d70756c6973
> (6) FreeRADIUS-Proxied-To = 127.0.0.1
> (6) User-Name = "mpulis"
> (6) WARNING: Outer and inner identities are the same. User privacy is
> compromised.
> (6) server inner-tunnel {
> (6) # Executing section authorize from file
> /etc/freeradius/sites-enabled/inner-tunnel
> (6) authorize {
> (6) policy filter_username {
> (6) if (&User-Name) {
> (6) if (&User-Name) -> TRUE
> (6) if (&User-Name) {
> (6) if (&User-Name =~ / /) {
> (6) if (&User-Name =~ / /) -> FALSE
> (6) if (&User-Name =~ /@[^@]*@/ ) {
> (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (6) if (&User-Name =~ /\.\./ ) {
> (6) if (&User-Name =~ /\.\./ ) -> FALSE
> (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (6) if (&User-Name =~ /\.$/) {
> (6) if (&User-Name =~ /\.$/) -> FALSE
> (6) if (&User-Name =~ /@\./) {
> (6) if (&User-Name =~ /@\./) -> FALSE
> (6) } # if (&User-Name) = notfound
> (6) } # policy filter_username = notfound
> (6) [chap] = noop
> (6) [mschap] = noop
> (6) suffix: Checking for suffix after "@"
> (6) suffix: No '@' in User-Name = "mpulis", looking up realm NULL
> (6) suffix: No such realm "NULL"
> (6) [suffix] = noop
> (6) update control {
> (6) &Proxy-To-Realm := LOCAL
> (6) } # update control = noop
> (6) eap: Peer sent EAP Response (code 2) ID 0 length 11
> (6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
> rest of authorize
> (6) [eap] = ok
> (6) } # authorize = ok
> (6) Found Auth-Type = eap
> (6) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
> (6) authenticate {
> (6) eap: Peer sent packet with method EAP Identity (1)
> (6) eap: Calling submodule eap_md5 to process data
> (6) eap_md5: Issuing MD5 Challenge
> (6) eap: Sending EAP Request (code 1) ID 1 length 22
> (6) eap: EAP session adding &reply:State = 0x2dcb3c7c2dca38ab
> (6) [eap] = handled
> (6) } # authenticate = handled
> (6) } # server inner-tunnel
> (6) Virtual server sending reply
> (6) EAP-Message = 0x010100160410ec9e80ce552a991bf262b68ca81ac72e
> (6) Message-Authenticator = 0x00000000000000000000000000000000
> (6) State = 0x2dcb3c7c2dca38ab341ae2a70b5ec88b
> (6) eap_ttls: Got tunneled Access-Challenge
> (6) eap: Sending EAP Request (code 1) ID 193 length 79
> (6) eap: EAP session adding &reply:State = 0x104c8eb0168d9be8
> (6) [eap] = handled
> (6) } # authenticate = handled
> (6) Using Post-Auth-Type Challenge
> (6) Post-Auth-Type sub-section not found. Ignoring.
> (6) # Executing group from file /etc/freeradius/sites-enabled/default
> (6) Sent Access-Challenge Id 15 from 192.168.100.201:1812 to
> 192.168.100.110:52775 length 0
> (6) EAP-Message =
> 0x01c1004f15800000004517030100406f6bfe65010fa9323ed7a6bbf9b4fd844fee2e865ce18b5706d157564969ae8fe8e3cf28c01120e207316199b1b8516719a0b0e939c95a4d77462807695068b6
> (6) Message-Authenticator = 0x00000000000000000000000000000000
> (6) State = 0x104c8eb0168d9be8aa68bc37dd34ca62
> (6) Finished request
> Waking up in 4.9 seconds.
> (7) Received Access-Request Id 16 from 192.168.100.110:52775 to
> 192.168.100.201:1812 length 247
> (7) User-Name = "mpulis"
> (7) NAS-Identifier = "802aa849c3a3"
> (7) NAS-Port = 0
> (7) Called-Station-Id = "82-2A-A8-4B-C3-A3:SeminaryWiFi"
> (7) Calling-Station-Id = "B0-DF-3A-7C-23-5E"
> (7) Framed-MTU = 1400
> (7) NAS-Port-Type = Wireless-802.11
> (7) Connect-Info = "CONNECT 0Mbps 802.11b"
> (7) EAP-Message =
> 0x02c1004b1500170301004048b4eadb4e11dc091be6b871f7dcd29603716d4ec6b87a22c7499a1d16ecdcce190db0546cb0912362038f87a6c9b3e3a971564e29ebb7f14bb4fb7df035f265
> (7) State = 0x104c8eb0168d9be8aa68bc37dd34ca62
> (7) Message-Authenticator = 0x4979edd89c7646dbb7c37729c121bd40
> (7) session-state: No cached attributes
> (7) # Executing section authorize from file
> /etc/freeradius/sites-enabled/default
> (7) authorize {
> (7) policy filter_username {
> (7) if (&User-Name) {
> (7) if (&User-Name) -> TRUE
> (7) if (&User-Name) {
> (7) if (&User-Name =~ / /) {
> (7) if (&User-Name =~ / /) -> FALSE
> (7) if (&User-Name =~ /@[^@]*@/ ) {
> (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (7) if (&User-Name =~ /\.\./ ) {
> (7) if (&User-Name =~ /\.\./ ) -> FALSE
> (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
> FALSE
> (7) if (&User-Name =~ /\.$/) {
> (7) if (&User-Name =~ /\.$/) -> FALSE
> (7) if (&User-Name =~ /@\./) {
> (7) if (&User-Name =~ /@\./) -> FALSE
> (7) } # if (&User-Name) = notfound
> (7) } # policy filter_username = notfound
> (7) [preprocess] = ok
> (7) [chap] = noop
> (7) [mschap] = noop
> (7) suffix: Checking for suffix after "@"
> (7) suffix: No '@' in User-Name = "mpulis", looking up realm NULL
> (7) suffix: No such realm "NULL"
> (7) [suffix] = noop
> (7) eap: Peer sent EAP Response (code 2) ID 193 length 75
> (7) eap: Continuing tunnel setup
> (7) [eap] = ok
> (7) } # authorize = ok
> (7) Found Auth-Type = eap
> (7) # Executing group from file /etc/freeradius/sites-enabled/default
> (7) authenticate {
> (7) eap: Expiring EAP session with state 0x2dcb3c7c2dca38ab
> (7) eap: Finished EAP session with state 0x104c8eb0168d9be8
> (7) eap: Previous EAP request found for state 0x104c8eb0168d9be8, released
> from the list
> (7) eap: Peer sent packet with method EAP TTLS (21)
> (7) eap: Calling submodule eap_ttls to process data
> (7) eap_ttls: Authenticate
> (7) eap_ttls: Continuing EAP-TLS
> (7) eap_ttls: [eaptls verify] = ok
> (7) eap_ttls: Done initial handshake
> (7) eap_ttls: [eaptls process] = ok
> (7) eap_ttls: Session established. Proceeding to decode tunneled attributes
> (7) eap_ttls: Got tunneled request
> (7) eap_ttls: EAP-Message = 0x020100160410229a728db478439fed46421e54ea7160
> (7) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1
> (7) eap_ttls: Sending tunneled request
> (7) Virtual server inner-tunnel received request
> (7) EAP-Message = 0x020100160410229a728db478439fed46421e54ea7160
> (7) FreeRADIUS-Proxied-To = 127.0.0.1
> (7) User-Name = "mpulis"
> (7) State = 0x2dcb3c7c2dca38ab341ae2a70b5ec88b
> (7) WARNING: Outer and inner identities are the same. User privacy is
> compromised.
> (7) server inner-tunnel {
> (7) session-state: No cached attributes
> (7) # Executing section authorize from file
> /etc/freeradius/sites-enabled/inner-tunnel
> (7) authorize {
> (7) policy filter_username {
> (7) if (&User-Name) {
> (7) if (&User-Name) -> TRUE
> (7) if (&User-Name) {
> (7) if (&User-Name =~ / /) {
> (7) if (&User-Name =~ / /) -> FALSE
> (7) if (&User-Name =~ /@[^@]*@/ ) {
> (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (7) if (&User-Name =~ /\.\./ ) {
> (7) if (&User-Name =~ /\.\./ ) -> FALSE
> (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (7) if (&User-Name =~ /\.$/) {
> (7) if (&User-Name =~ /\.$/) -> FALSE
> (7) if (&User-Name =~ /@\./) {
> (7) if (&User-Name =~ /@\./) -> FALSE
> (7) } # if (&User-Name) = notfound
> (7) } # policy filter_username = notfound
> (7) [chap] = noop
> (7) [mschap] = noop
> (7) suffix: Checking for suffix after "@"
> (7) suffix: No '@' in User-Name = "mpulis", looking up realm NULL
> (7) suffix: No such realm "NULL"
> (7) [suffix] = noop
> (7) update control {
> (7) &Proxy-To-Realm := LOCAL
> (7) } # update control = noop
> (7) eap: Peer sent EAP Response (code 2) ID 1 length 22
> (7) eap: No EAP Start, assuming it's an on-going EAP conversation
> (7) [eap] = updated
> (7) [files] = noop
> rlm_ldap (ldap): Reserved connection (1)
> (7) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
> (7) ldap: --> (cn=mpulis)
> (7) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with
> filter "(cn=mpulis)", scope "sub"
> (7) ldap: Waiting for search result...
> (7) ldap: User object found at DN
> "cn=mpulis,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
> (7) ldap: Processing user attributes
> (7) ldap: control:Password-With-Header +=
> '{ssha}VlINJtlRL+9CuOK5itOeTIvRfwKRSNj9xllpiQ=='
> rlm_ldap (ldap): Released connection (1)
> (7) [ldap] = updated
> (7) [expiration] = noop
> (7) [logintime] = noop
> (7) pap: Converted: Password-With-Header -> SSHA1-Password
> (7) pap: Removing &control:Password-With-Header
> (7) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28
> bytes
> (7) pap: WARNING: Auth-Type already set. Not setting to PAP
> (7) [pap] = noop
> (7) } # authorize = updated
> (7) Found Auth-Type = eap
> (7) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
> (7) authenticate {
> (7) eap: Expiring EAP session with state 0x2dcb3c7c2dca38ab
> (7) eap: Finished EAP session with state 0x2dcb3c7c2dca38ab
> (7) eap: Previous EAP request found for state 0x2dcb3c7c2dca38ab, released
> from the list
> (7) eap: Peer sent packet with method EAP MD5 (4)
> (7) eap: Calling submodule eap_md5 to process data
> (7) eap_md5: Cleartext-Password is required for EAP-MD5 authentication
> (7) eap: ERROR: Failed continuing EAP MD5 (4) session. EAP sub-module
> failed
> (7) eap: Sending EAP Failure (code 4) ID 1 length 4
> (7) eap: Failed in EAP select
> (7) [eap] = invalid
> (7) } # authenticate = invalid
> (7) Failed to authenticate the user
> (7) Using Post-Auth-Type Reject
> (7) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
> (7) Post-Auth-Type REJECT {
> (7) attr_filter.access_reject: EXPAND %{User-Name}
> (7) attr_filter.access_reject: --> mpulis
> (7) attr_filter.access_reject: Matched entry DEFAULT at line 11
> (7) [attr_filter.access_reject] = updated
> (7) update outer.session-state {
> (7) &Module-Failure-Message := &request:Module-Failure-Message ->
> 'eap: Failed continuing EAP MD5 (4) session. EAP sub-module failed'
> (7) } # update outer.session-state = noop
> (7) } # Post-Auth-Type REJECT = updated
> (7) } # server inner-tunnel
> (7) Virtual server sending reply
> (7) EAP-Message = 0x04010004
> (7) Message-Authenticator = 0x00000000000000000000000000000000
> (7) eap_ttls: Got tunneled Access-Reject
> (7) eap: ERROR: Failed continuing EAP TTLS (21) session. EAP sub-module
> failed
> (7) eap: Sending EAP Failure (code 4) ID 193 length 4
> (7) eap: Failed in EAP select
> (7) [eap] = invalid
> (7) } # authenticate = invalid
> (7) Failed to authenticate the user
> (7) Using Post-Auth-Type Reject
> (7) # Executing group from file /etc/freeradius/sites-enabled/default
> (7) Post-Auth-Type REJECT {
> (7) attr_filter.access_reject: EXPAND %{User-Name}
> (7) attr_filter.access_reject: --> mpulis
> (7) attr_filter.access_reject: Matched entry DEFAULT at line 11
> (7) [attr_filter.access_reject] = updated
> (7) [eap] = noop
> (7) policy remove_reply_message_if_eap {
> (7) if (&reply:EAP-Message && &reply:Reply-Message) {
> (7) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
> (7) else {
> (7) [noop] = noop
> (7) } # else = noop
> (7) } # policy remove_reply_message_if_eap = noop
> (7) } # Post-Auth-Type REJECT = updated
> (7) Delaying response for 1.000000 seconds
> Waking up in 0.3 seconds.
> Waking up in 0.6 seconds.
> (7) Sending delayed response
> (7) Sent Access-Reject Id 16 from 192.168.100.201:1812 to
> 192.168.100.110:52775 length 44
> (7) EAP-Message = 0x04c10004
> (7) Message-Authenticator = 0x00000000000000000000000000000000
> Waking up in 3.9 seconds.
> (0) Cleaning up request packet ID 9 with timestamp +10
> (1) Cleaning up request packet ID 10 with timestamp +10
> (2) Cleaning up request packet ID 11 with timestamp +10
> (3) Cleaning up request packet ID 12 with timestamp +10
> (4) Cleaning up request packet ID 13 with timestamp +10
> (5) Cleaning up request packet ID 14 with timestamp +10
> (6) Cleaning up request packet ID 15 with timestamp +10
> (7) Cleaning up request packet ID 16 with timestamp +10
> Ready to process requests
>
>
>
> Matthew Pulis
> web: www.matthewpulis.info
> mob: +356 79539404
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
--
Met vriendelijke groeten,
With kind regards,
Mit freundlichen Gruessen,
De jrus wah,
Will
*************************************
W.K. Offermans
Powered by ....
(__)
\\\'',)
\/ \ ^
.\._/_)
www.FreeBSD.org
More information about the Freeradius-Users
mailing list