EAP-TTLS+PAP vs. Ubunt 15 / Windows 10
Bogdan Rudas
brudas at exadel.com
Tue Sep 6 12:14:04 CEST 2016
On Tue, Sep 6, 2016 at 12:03 PM, Matthew Newton <mcn4 at leicester.ac.uk>
wrote:
> On Tue, Sep 06, 2016 at 10:52:02AM +0300, Bogdan Rudas via
> Freeradius-Users wrote:
> > Here is server debug output:
> >
> > (0) Received Access-Request Id 153 from 1.2.3.2:32768 to 1.2.3.4:1812
> > length 264
> > (0) User-Name = "anonymous"
> > (0) Chargeable-User-Identity = 0x00
> ...
> > (0) Sent Access-Challenge Id 153 from 1.2.3.4:1812 to 1.2.3.2:32768
> length 0
> > (0) EAP-Message = 0x010200061520
> > (0) Message-Authenticator = 0x00000000000000000000000000000000
> > (0) State = 0x53397887533b6d8a7ce5420be31fd0c8
> > (0) Finished request
>
> > Please, help me distinguish: is it WiFi client, WLC or FreeRADIUS
> > configuration issue?
>
> If that's *all* the debug output, then it's a client issue, as the
> client is ignoring the challenge.
>
> Otherwise please post all the debug output from the FreeRADIUS
> starting banner down to including the complete authentication.
>
>
Here is more complete output for Ubuntu 15.10 client:
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 54152
Ready to process requests
(0) Received Access-Request Id 172 from 1.2.3.2:32768 to 1.2.3.4:1812
length 264
(0) User-Name = "anonymous"
(0) Chargeable-User-Identity = 0x00
(0) Location-Capable = Civix-Location
(0) Calling-Station-Id = "c4-8e-8f-f5-eb-4f"
(0) Called-Station-Id = "54-7c-69-f2-1c-a0:New"
(0) NAS-Port = 1
(0) Cisco-AVPair = "audit-session-id=c0a819020000044d57ce90a5"
(0) Acct-Session-Id = "57ce90a5/c4:8e:8f:f5:eb:4f/2743"
(0) NAS-IP-Address = 1.2.3.2
(0) NAS-Identifier = "backup"
(0) Airespace-Wlan-Id = 6
(0) Service-Type = Framed-User
(0) Framed-MTU = 1300
(0) NAS-Port-Type = Wireless-802.11
(0) Tunnel-Type:0 = VLAN
(0) Tunnel-Medium-Type:0 = IEEE-802
(0) Tunnel-Private-Group-Id:0 = "15"
(0) EAP-Message = 0x0201000e01616e6f6e796d6f7573
(0) Message-Authenticator = 0x7594979df5652e17b46d367e0249aae4
(0) # Executing section authorize from file /etc/freeradius/sites-enabled/
default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 1 length 14
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0) [eap] = ok
(0) } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0) authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_ttls to process data
(0) eap_ttls: Initiating new EAP-TLS session
(0) eap_ttls: Flushing SSL sessions (of #0)
(0) eap_ttls: [eaptls start] = request
(0) eap: Sending EAP Request (code 1) ID 2 length 6
(0) eap: EAP session adding &reply:State = 0xaa5a11c1aa5804cd
(0) [eap] = handled
(0) } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) Post-Auth-Type sub-section not found. Ignoring.
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0) Sent Access-Challenge Id 172 from 1.2.3.4:1812 to 1.2.3.2:32768 length 0
(0) EAP-Message = 0x010200061520
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0xaa5a11c1aa5804cd3319b975cc2ec9dd
(0) Finished request
Waking up in 4.9 seconds.
Waking up in 7.8 seconds.
Waking up in 15.7 seconds.
Waking up in 33.6 seconds.
Waking up in 71.5 seconds.
Waking up in 149.4 seconds.
^L^C
Here is more complete output for Windows 10 client:
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 48997
Ready to process requests
(0) Received Access-Request Id 173 from 1.2.3.2:32768 to 1.2.3.4:1812
length 264
(0) User-Name = "anonymous"
(0) Chargeable-User-Identity = 0x00
(0) Location-Capable = Civix-Location
(0) Calling-Station-Id = "f8-16-54-c8-6c-7f"
(0) Called-Station-Id = "54-7c-69-f2-1c-a0:New"
(0) NAS-Port = 1
(0) Cisco-AVPair = "audit-session-id=c0a819020000044e57ce9329"
(0) Acct-Session-Id = "57ce9329/f8:16:54:c8:6c:7f/2744"
(0) NAS-IP-Address = 1.2.3.2
(0) NAS-Identifier = "backup"
(0) Airespace-Wlan-Id = 6
(0) Service-Type = Framed-User
(0) Framed-MTU = 1300
(0) NAS-Port-Type = Wireless-802.11
(0) Tunnel-Type:0 = VLAN
(0) Tunnel-Medium-Type:0 = IEEE-802
(0) Tunnel-Private-Group-Id:0 = "15"
(0) EAP-Message = 0x0202000e01616e6f6e796d6f7573
(0) Message-Authenticator = 0xadf44f01cf7f03c60c7352932c8ae7e7
(0) # Executing section authorize from file /etc/freeradius/sites-enabled/
default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 2 length 14
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0) [eap] = ok
(0) } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0) authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_ttls to process data
(0) eap_ttls: Initiating new EAP-TLS session
(0) eap_ttls: Flushing SSL sessions (of #0)
(0) eap_ttls: [eaptls start] = request
(0) eap: Sending EAP Request (code 1) ID 3 length 6
(0) eap: EAP session adding &reply:State = 0x8d5396258d508333
(0) [eap] = handled
(0) } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) Post-Auth-Type sub-section not found. Ignoring.
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0) Sent Access-Challenge Id 173 from 1.2.3.4:1812 to 1.2.3.2:32768 length 0
(0) EAP-Message = 0x010300061520
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0x8d5396258d5083331fb57364af922639
(0) Finished request
Waking up in 4.9 seconds.
Waking up in 7.8 seconds.
Waking up in 15.7 seconds.
Waking up in 33.6 seconds.
Waking up in 71.5 seconds.
Waking up in 149.4 seconds.
Here is server startup log:
Server was built with:
accounting : yes
authentication : yes
ascend-binary-attributes : yes
coa : yes
control-socket : yes
detail : yes
dhcp : yes
dynamic-clients : yes
osfc2 : no
proxy : yes
regex-pcre : no
regex-posix : yes
regex-posix-extended : yes
session-management : yes
stats : yes
tcp : yes
threads : yes
tls : yes
unlang : yes
vmps : yes
developer : no
Server core libs:
freeradius-server : 3.0.11
talloc : 2.0.*
ssl : 1.0.2g release
Endianness:
little
Compilation flags:
cppflags : -Wdate-time -D_FORTIFY_SOURCE=2
cflags : -I/build/freeradius-G88Mfz/freeradius-3.0.11
-I/build/freeradius-G88Mfz/freeradius-3.0.11/src -include
/build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/autoconf.h
-include /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/build.h
-include /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/features.h
-include /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/radpaths.h
-fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat
-Werror=format-security -O2 -Wall -std=c99 -D_GNU_SOURCE -D_REENTRANT
-D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -DNDEBUG -DIS_MODULE=1
ldflags : -Wl,-Bsymbolic-functions -Wl,-z,relro
libs : -lcrypto -lssl -ltalloc -lcap -lnsl -lresolv -ldl -lpthread
-lreadline
Copyright (C) 1999-2016 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/dictionary
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/mods-enabled/
including configuration file /etc/freeradius/mods-enabled/cache_eap
including configuration file /etc/freeradius/mods-enabled/logintime
including configuration file /etc/freeradius/mods-enabled/soh
including configuration file /etc/freeradius/mods-enabled/exec
including configuration file /etc/freeradius/mods-enabled/radutmp
including configuration file /etc/freeradius/mods-enabled/unix
including configuration file /etc/freeradius/mods-enabled/chap
including configuration file /etc/freeradius/mods-enabled/linelog
including configuration file /etc/freeradius/mods-enabled/replicate
including configuration file /etc/freeradius/mods-enabled/detail.log
including configuration file /etc/freeradius/mods-enabled/utf8
including configuration file /etc/freeradius/mods-enabled/expiration
including configuration file /etc/freeradius/mods-enabled/preprocess
including configuration file /etc/freeradius/mods-enabled/ldap
including configuration file /etc/freeradius/mods-enabled/realm
including configuration file /etc/freeradius/mods-enabled/detail
including configuration file /etc/freeradius/mods-enabled/expr
including configuration file /etc/freeradius/mods-enabled/sradutmp
including configuration file /etc/freeradius/mods-enabled/eap
including configuration file /etc/freeradius/mods-enabled/unpack
including configuration file /etc/freeradius/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/mods-enabled/digest
including configuration file /etc/freeradius/mods-enabled/passwd
including configuration file /etc/freeradius/mods-enabled/files
including configuration file /etc/freeradius/mods-enabled/echo
including configuration file /etc/freeradius/mods-enabled/always
including configuration file /etc/freeradius/mods-enabled/mschap
including configuration file /etc/freeradius/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/mods-enabled/attr_filter
including configuration file /etc/freeradius/mods-enabled/pap
including files in directory /etc/freeradius/policy.d/
including configuration file /etc/freeradius/policy.d/filter
including configuration file /etc/freeradius/policy.d/abfab-tr
including configuration file /etc/freeradius/policy.d/accounting
including configuration file /etc/freeradius/policy.d/canonicalization
including configuration file /etc/freeradius/policy.d/dhcp
including configuration file /etc/freeradius/policy.d/control
including configuration file /etc/freeradius/policy.d/operator-name
including configuration file /etc/freeradius/policy.d/cui
including configuration file /etc/freeradius/policy.d/eap
including configuration file /etc/freeradius/policy.d/debug
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/default
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
main {
security {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client controller {
ipaddr = 1.2.3.2
require_message_authenticator = no
secret = <<< secret >>>
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
# Creating Auth-Type = digest
# Creating Auth-Type = LDAP
# Creating Auth-Type = eap
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_cache
# Loading module "cache_eap" from file /etc/freeradius/mods-enabled/c
ache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_logintime
# Loading module "logintime" from file /etc/freeradius/mods-enabled/l
ogintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_soh
# Loading module "soh" from file /etc/freeradius/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_exec
# Loading module "exec" from file /etc/freeradius/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_radutmp
# Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/freeradius/mods-enabled/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_chap
# Loading module "chap" from file /etc/freeradius/mods-enabled/chap
# Loaded module rlm_linelog
# Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog
linelog {
filename = "/var/log/freeradius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file /etc/freeradius/mods-enabled/l
inelog
linelog log_accounting {
filename = "/var/log/freeradius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_replicate
# Loading module "replicate" from file /etc/freeradius/mods-enabled/r
eplicate
# Loaded module rlm_detail
# Loading module "auth_log" from file /etc/freeradius/mods-enabled/d
etail.log
detail auth_log {
filename = "/var/log/freeradius/radacct/%
{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /etc/freeradius/mods-enabled/d
etail.log
detail reply_log {
filename = "/var/log/freeradius/radacct/%
{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/d
etail.log
detail pre_proxy_log {
filename = "/var/log/freeradius/radacct/%
{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-p
roxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/d
etail.log
detail post_proxy_log {
filename = "/var/log/freeradius/radacct/%
{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-
proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
# Loaded module rlm_expiration
# Loading module "expiration" from file /etc/freeradius/mods-enabled/e
xpiration
# Loaded module rlm_preprocess
# Loading module "preprocess" from file /etc/freeradius/mods-enabled/p
reprocess
preprocess {
huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
hints = "/etc/freeradius/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_ldap
# Loading module "ldap" from file /etc/freeradius/mods-enabled/ldap
ldap {
server = "ldap.office.local"
identity = "..............."
password = <<< secret >>>
sasl {
}
user {
scope = "sub"
access_positive = yes
sasl {
}
}
group {
filter = "(objectClass=posixGroup)"
scope = "sub"
name_attribute = "cn"
membership_attribute = "memberOf"
cacheable_name = no
cacheable_dn = no
}
client {
filter = "(objectClass=radiusClient)"
scope = "sub"
base_dn = ".............."
}
profile {
}
options {
ldap_debug = 40
chase_referrals = yes
net_timeout = 1
res_timeout = 10
srv_timelimit = 3
idle = 60
probes = 3
interval = 3
}
tls {
start_tls = no
}
}
Creating attribute LDAP-Group
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /etc/freeradius/mods-enabled/r
ealm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loading module "detail" from file /etc/freeradius/mods-enabled/detail
detail {
filename = "/var/log/freeradius/radacct/%
{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_expr
# Loading module "expr" from file /etc/freeradius/mods-enabled/expr
expr {
safe_characters = "@abcdefghijklmnopqrstuvwxyzAB
CDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆ
ÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loading module "sradutmp" from file /etc/freeradius/mods-enabled/s
radutmp
radutmp sradutmp {
filename = "/var/log/freeradius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_eap
# Loading module "eap" from file /etc/freeradius/mods-enabled/eap
eap {
default_eap_type = "ttls"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loaded module rlm_unpack
# Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file
/etc/freeradius/mods-enabled/dynamic_clients
# Loaded module rlm_digest
# Loading module "digest" from file /etc/freeradius/mods-enabled/digest
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/p
asswd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_files
# Loading module "files" from file /etc/freeradius/mods-enabled/files
files {
filename = "/etc/freeradius/mods-config/files/authorize"
acctusersfile = "/etc/freeradius/mods-config/files/accounting"
preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
}
# Loading module "echo" from file /etc/freeradius/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loaded module rlm_always
# Loading module "reject" from file /etc/freeradius/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/freeradius/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/freeradius/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/freeradius/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/freeradius/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/freeradius/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/freeradius/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/freeradius/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/freeradius/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_mschap
# Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
}
# Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/n
tlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file
/etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file
/etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/freeradius/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file
/etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/freeradius/mods-config/a
ttr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_pap
# Loading module "pap" from file /etc/freeradius/mods-enabled/pap
pap {
normalise = yes
}
instantiate {
}
# Instantiating module "cache_eap" from file
/etc/freeradius/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
loaded and linked
# Instantiating module "logintime" from file
/etc/freeradius/mods-enabled/logintime
# Instantiating module "linelog" from file /etc/freeradius/mods-enabled/l
inelog
# Instantiating module "log_accounting" from file
/etc/freeradius/mods-enabled/linelog
# Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/d
etail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
# Instantiating module "reply_log" from file
/etc/freeradius/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
# Instantiating module "expiration" from file
/etc/freeradius/mods-enabled/expiration
# Instantiating module "preprocess" from file
/etc/freeradius/mods-enabled/preprocess
reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/mods-config/preprocess/hints
# Instantiating module "ldap" from file /etc/freeradius/mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20442
accounting {
reference = "%{tolower:type.%{Acct-Status-Type}}"
}
post-auth {
reference = "."
}
rlm_ldap (ldap): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
spread = no
}
rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots
used
rlm_ldap (ldap): Connecting to ldap://ldap.office.local:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots
used
rlm_ldap (ldap): Connecting to ldap://ldap.office.local:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots
used
rlm_ldap (ldap): Connecting to ldap://ldap.office.local:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots
used
rlm_ldap (ldap): Connecting to ldap://ldap.office.local:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots
used
rlm_ldap (ldap): Connecting to ldap://ldap.office.local:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
# Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/r
ealm
# Instantiating module "suffix" from file /etc/freeradius/mods-enabled/r
ealm
# Instantiating module "realmpercent" from file
/etc/freeradius/mods-enabled/realm
# Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/r
ealm
# Instantiating module "detail" from file /etc/freeradius/mods-enabled/d
etail
# Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/freeradius/certs"
pem_file_type = yes
private_key_file = "/etc/freeradius/certs/server.pem"
certificate_file = "/etc/freeradius/certs/server.pem"
ca_file = "/etc/freeradius/certs/ca.pem"
private_key_password = <<< secret >>>
dh_file = "/etc/freeradius/certs/dh"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
ecdh_curve = "prime256v1"
cache {
enable = yes
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "etc_passwd" from file
/etc/freeradius/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "files" from file /etc/freeradius/mods-enabled/f
iles
reading pairlist file /etc/freeradius/mods-config/files/authorize
reading pairlist file /etc/freeradius/mods-config/files/accounting
reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
# Instantiating module "reject" from file /etc/freeradius/mods-enabled/a
lways
# Instantiating module "fail" from file /etc/freeradius/mods-enabled/a
lways
# Instantiating module "ok" from file /etc/freeradius/mods-enabled/always
# Instantiating module "handled" from file /etc/freeradius/mods-enabled/a
lways
# Instantiating module "invalid" from file /etc/freeradius/mods-enabled/a
lways
# Instantiating module "userlock" from file /etc/freeradius/mods-enabled/a
lways
# Instantiating module "notfound" from file /etc/freeradius/mods-enabled/a
lways
# Instantiating module "noop" from file /etc/freeradius/mods-enabled/a
lways
# Instantiating module "updated" from file /etc/freeradius/mods-enabled/a
lways
# Instantiating module "mschap" from file /etc/freeradius/mods-enabled/m
schap
rlm_mschap (mschap): using internal authentication
# Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay-USec" found in filter list for realm
"DEFAULT".
# Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/at
tr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/at
tr_filter/accounting_response
# Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
} # server
server default { # from file /etc/freeradius/sites-enabled/default
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Amd finally Windows 10 WiFi connection configuration dump:
<?xml version="1.0"?>
<WLANProfile
xmlns="http://www.microsoft.com/networking/WLAN/profile/v1">
<name>New</name>
<SSIDConfig>
<SSID>
<hex>4E6577</hex>
<name>New</name>
</SSID>
<nonBroadcast>false</nonBroadcast>
</SSIDConfig>
<connectionType>ESS</connectionType>
<connectionMode>manual</connectionMode>
<autoSwitch>false</autoSwitch>
<MSM>
<security>
<authEncryption>
<authentication>WPA2</authentication>
<encryption>AES</encryption>
<useOneX>true</useOneX>
</authEncryption>
<OneX
xmlns="http://www.microsoft.com/networking/OneX/v1">
<cacheUserData>false</cacheUserData>
<EAPConfig>
<EapHostConfig
xmlns="
http://www.microsoft.com/provisioning/EapHostConfig">
<EapMethod>
<Type
xmlns="
http://www.microsoft.com/provisioning/EapCommon">21
</Type>
<VendorId
xmlns="
http://www.microsoft.com/provisioning/EapCommon">0
</VendorId>
<VendorType
xmlns="
http://www.microsoft.com/provisioning/EapCommon">0
</VendorType>
<AuthorId
xmlns="
http://www.microsoft.com/provisioning/EapCommon">311
</AuthorId>
</EapMethod>
<Config
xmlns="
http://www.microsoft.com/provisioning/EapHostConfig">
<EapTtls
xmlns="
http://www.microsoft.com/provisioning/EapTtlsConnectionPropertiesV1">
<ServerValidation>
<ServerNames></ServerNames>
<DisablePrompt>false</DisablePrompt>
</ServerValidation>
<Phase2Authentication>
<PAPAuthentication/>
</Phase2Authentication>
<Phase1Identity>
<IdentityPrivacy>true</IdentityPrivacy>
<AnonymousIdentity>anonymous</AnonymousIdentity>
</Phase1Identity>
</EapTtls>
</Cnogmfig>
</EapHostConfig>
</EAPConfig>
</OneX>
</security>
</MSM>
</WLANProfile>
Thank you.
--
Bogdan Rudas
Head of Minsk IT Support Department
Exadel Inc.
http://www.exadel.com/
E-mail: brudas at exadel.com
Skype ID: bogdan.rudas
--
CONFIDENTIALITY NOTICE: This email and files attached to it are
confidential. If you are not the intended recipient you are hereby notified
that using, copying, distributing or taking any action in reliance on the
contents of this information is strictly prohibited. If you have received
this email in error please notify the sender and delete this email.
More information about the Freeradius-Users
mailing list