Troubleshooting EAP-TLS with External Certificates
Matthew West
matthew.t.west at gmail.com
Thu Sep 15 21:43:08 CEST 2016
Hello List,
I've placed a symlink in /etc/raddb/sites-enabled to
/etc/raddb/sites-available for the check-eap-tls virtual server.
Ownership of file and symlink are the same as all the other files. It
shows the server loading when starting the server:
including configuration file /etc/raddb/sites-enabled/check-eap-tls
I don't see any reference to the server starting the authorize{}
section in the check-eap-tls server, though (output below). From
the READMEs it looks like I need to define another server in the
radiusd.conf file, but that file states that all I need to do is place
the file in /etc/raddb/sites-enabled/.
What did I miss? Do I need to enable debug in the check-eap-tls file?
I know this is really simple for some, but I'm still new to FR.
Thank You Again,
Matthew West
---
radiusd: FreeRADIUS Version 3.0.4, for host x86_64-redhat-linux-gnu,
built on Mar 5 2015 at 23:41:36
Copyright (C) 1999-2014 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/utf8
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/operator-name
including configuration file /etc/raddb/policy.d/filter.org
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
including configuration file /etc/raddb/sites-enabled/check-eap-tls
main {
security {
user = "radiusd"
group = "radiusd"
allow_core_dumps = no
}
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client bea-corp-sw1 {
ipaddr = 10.XX.XX.123
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
radiusd: #### Instantiating modules ####
instantiate {
}
modules {
# Loaded module rlm_always
# Instantiating module "reject" from file /etc/raddb/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Instantiating module "fail" from file /etc/raddb/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Instantiating module "ok" from file /etc/raddb/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Instantiating module "handled" from file /etc/raddb/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Instantiating module "noop" from file /etc/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Instantiating module "updated" from file /etc/raddb/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_attr_filter
# Instantiating module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/raddb/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
# Instantiating module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
# Loaded module rlm_cache
# Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
cache cache_eap {
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 16384
epoch = 0
add_stats = no
}
# Loaded module rlm_chap
# Instantiating module "chap" from file /etc/raddb/mods-enabled/chap
# Loaded module rlm_detail
# Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
detail {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log
detail auth_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
# Instantiating module "reply_log" from file
/etc/raddb/mods-enabled/detail.log
detail reply_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Instantiating module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
detail pre_proxy_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Instantiating module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
detail post_proxy_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Loaded module rlm_dhcp
# Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp
# Loaded module rlm_digest
# Instantiating module "digest" from file /etc/raddb/mods-enabled/digest
# Loaded module rlm_dynamic_clients
# Instantiating module "dynamic_clients" from file
/etc/raddb/mods-enabled/dynamic_clients
# Loaded module rlm_eap
# Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
mod_accounting_username_bug = no
max_sessions = 1024
}
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
ca_path = "/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/etc/raddb/certs/star.acme.net.key"
certificate_file = "/etc/raddb/certs/star.acme.net.crt"
ca_file = "/etc/raddb/certs/yaana_bundle.crt"
dh_file = "/etc/raddb/certs/dh"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
ecdh_curve = "prime256v1"
cache {
enable = yes
lifetime = 24
max_entries = 255
}
verify {
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = yes
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_method = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Loaded module rlm_exec
# Instantiating module "echo" from file /etc/raddb/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Instantiating module "exec" from file /etc/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_expiration
# Instantiating module "expiration" from file
/etc/raddb/mods-enabled/expiration
# Loaded module rlm_expr
# Instantiating module "expr" from file /etc/raddb/mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/"
}
# Loaded module rlm_files
# Instantiating module "files" from file /etc/raddb/mods-enabled/files
files {
filename = "/etc/raddb/mods-config/files/authorize"
usersfile = "/etc/raddb/mods-config/files/authorize"
acctusersfile = "/etc/raddb/mods-config/files/accounting"
preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
compat = "cistron"
}
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:87 Cistron compatibility
checks for entry bob ...
[/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility
checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility
checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility
checks for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:87 Cistron compatibility
checks for entry bob ...
[/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility
checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility
checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility
checks for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
# Loaded module rlm_linelog
# Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
linelog {
filename = "/var/log/radius/linelog"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{Packet-Type}:-default}"
}
# Instantiating module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/radius/linelog-accounting"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_logintime
# Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_mschap
# Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
}
# Instantiating module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_pap
# Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_passwd
# Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Loaded module rlm_preprocess
# Instantiating module "preprocess" from file
/etc/raddb/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
hints = "/etc/raddb/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
# Loaded module rlm_radutmp
# Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_realm
# Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_replicate
# Instantiating module "replicate" from file /etc/raddb/mods-enabled/replicate
# Loaded module rlm_soh
# Instantiating module "soh" from file /etc/raddb/mods-enabled/soh
soh {
dhcp = yes
}
# Instantiating module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/radius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_unix
# Instantiating module "unix" from file /etc/raddb/mods-enabled/unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
# Loaded module rlm_unpack
# Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack
# Loaded module rlm_utf8
# Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
# Creating Auth-Type = digest
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server inner-tunnel
server check-eap-tls { # from file /etc/raddb/sites-enabled/check-eap-tls
# Loading authorize {...}
} # server check-eap-tls
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on auth address * port 1812 as server default
Listening on acct address * port 1813 as server default
Listening on auth address :: port 1812 as server default
Listening on acct address :: port 1813 as server default
Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel
Opening new proxy socket 'proxy address * port 0'
Listening on proxy address * port 37814
Ready to process requests
Received Access-Request Id 133 from 10.XX.XX.123:1645 to
10.XX.XX.122:1812 length 164
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 0x02010011014d6174746865772057657374
Message-Authenticator = 0xd0ffe4fb2d80c98890564a89f1266097
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
NAS-IP-Address = 10.XX.XX.123
(0) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=133, length=164
(0) User-Name = 'Matthew West'
(0) Service-Type = Framed-User
(0) Framed-MTU = 1500
(0) Called-Station-Id = '08-CC-68-D5-1F-1E'
(0) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(0) EAP-Message = 0x02010011014d6174746865772057657374
(0) Message-Authenticator = 0xd0ffe4fb2d80c98890564a89f1266097
(0) NAS-Port-Type = Ethernet
(0) NAS-Port = 50130
(0) NAS-Port-Id = 'GigabitEthernet1/0/30'
(0) NAS-IP-Address = 10.XX.XX.123
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0) authorize {
(0) filter_username filter_username {
(0) if (!&User-Name)
(0) if (!&User-Name) -> FALSE
(0) if (&User-Name =~ /@.*@/ )
(0) if (&User-Name =~ /@.*@/ ) -> FALSE
(0) if (&User-Name =~ /\\.\\./ )
(0) if (&User-Name =~ /\\.\\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(0) if (&User-Name =~ /\\.$/)
(0) if (&User-Name =~ /\\.$/) -> FALSE
(0) if (&User-Name =~ /@\\./)
(0) if (&User-Name =~ /@\\./) -> FALSE
(0) } # filter_username filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix : Checking for suffix after "@"
(0) suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(0) suffix : No such realm "NULL"
(0) [suffix] = noop
(0) eap : Peer sent code Response (2) ID 1 length 17
(0) eap : EAP-Identity reply, returning 'ok' so we can short-circuit
the rest of authorize
(0) [eap] = ok
(0) } # authorize = ok
(0) Found Auth-Type = EAP
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0) authenticate {
(0) eap : Peer sent method Identity (1)
(0) eap : Calling eap_md5 to process EAP data
(0) eap_md5 : Issuing MD5 Challenge
(0) eap : New EAP session, adding 'State' attribute to reply 0xcb099606cb0b9240
(0) [eap] = handled
(0) } # authenticate = handled
(0) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=133, length=0
(0) EAP-Message = 0x010200160410d8af781e6d329a76e9246d412188266c
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0xcb099606cb0b9240e8f6a64065447ff1
Sending Access-Challenge Id 133 from 10.XX.XX.122:1812 to 10.XX.XX.123:1645
EAP-Message = 0x010200160410d8af781e6d329a76e9246d412188266c
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xcb099606cb0b9240e8f6a64065447ff1
(0) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 134 from 10.XX.XX.123:1645 to
10.XX.XX.122:1812 length 171
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 0x02020006030d
Message-Authenticator = 0x59fb16caa6e5ceb95aa1d58a75450c7d
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xcb099606cb0b9240e8f6a64065447ff1
NAS-IP-Address = 10.XX.XX.123
(1) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=134, length=171
(1) User-Name = 'Matthew West'
(1) Service-Type = Framed-User
(1) Framed-MTU = 1500
(1) Called-Station-Id = '08-CC-68-D5-1F-1E'
(1) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(1) EAP-Message = 0x02020006030d
(1) Message-Authenticator = 0x59fb16caa6e5ceb95aa1d58a75450c7d
(1) NAS-Port-Type = Ethernet
(1) NAS-Port = 50130
(1) NAS-Port-Id = 'GigabitEthernet1/0/30'
(1) State = 0xcb099606cb0b9240e8f6a64065447ff1
(1) NAS-IP-Address = 10.XX.XX.123
(1) # Executing section authorize from file /etc/raddb/sites-enabled/default
(1) authorize {
(1) filter_username filter_username {
(1) if (!&User-Name)
(1) if (!&User-Name) -> FALSE
(1) if (&User-Name =~ /@.*@/ )
(1) if (&User-Name =~ /@.*@/ ) -> FALSE
(1) if (&User-Name =~ /\\.\\./ )
(1) if (&User-Name =~ /\\.\\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(1) if (&User-Name =~ /\\.$/)
(1) if (&User-Name =~ /\\.$/) -> FALSE
(1) if (&User-Name =~ /@\\./)
(1) if (&User-Name =~ /@\\./) -> FALSE
(1) } # filter_username filter_username = notfound
(1) [preprocess] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) suffix : Checking for suffix after "@"
(1) suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(1) suffix : No such realm "NULL"
(1) [suffix] = noop
(1) eap : Peer sent code Response (2) ID 2 length 6
(1) eap : No EAP Start, assuming it's an on-going EAP conversation
(1) [eap] = updated
(1) [files] = noop
(1) [expiration] = noop
(1) [logintime] = noop
(1) WARNING: pap : No "known good" password found for the user. Not
setting Auth-Type
(1) WARNING: pap : Authentication will fail unless a "known good"
password is available
(1) [pap] = noop
(1) } # authorize = updated
(1) Found Auth-Type = EAP
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1) authenticate {
(1) eap : Expiring EAP session with state 0xcb099606cb0b9240
(1) eap : Finished EAP session with state 0xcb099606cb0b9240
(1) eap : Previous EAP request found for state 0xcb099606cb0b9240,
released from the list
(1) eap : Peer sent method NAK (3)
(1) eap : Found mutually acceptable type TLS (13)
(1) eap : Calling eap_tls to process EAP data
(1) eap_tls : Flushing SSL sessions (of #0)
(1) eap_tls : Requiring client certificate
(1) eap_tls : Initiate
(1) eap_tls : Requiring client certificate
(1) eap_tls : Start returned 1
(1) eap : New EAP session, adding 'State' attribute to reply 0xcb099606ca0a9b40
(1) [eap] = handled
(1) } # authenticate = handled
(1) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=134, length=0
(1) EAP-Message = 0x010300060d20
(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0xcb099606ca0a9b40e8f6a64065447ff1
Sending Access-Challenge Id 134 from 10.XX.XX.122:1812 to 10.XX.XX.123:1645
EAP-Message = 0x010300060d20
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xcb099606ca0a9b40e8f6a64065447ff1
(1) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 135 from 10.XX.XX.123:1645 to
10.XX.XX.122:1812 length 296
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 0x020300830d8000000079160301007401000070030157daf0f51eadd7de5db40012697b728872abb32aeb089e917205c1039184af0100002800ffc024c023c00ac009c008c028c027c014c013c012003d003c0035002f000ac007c011000500040100001f000a00080006001700180019000b0002010000050005010000000000120000
Message-Authenticator = 0x010e40a8c50f910938cef9cb3eaaf713
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xcb099606ca0a9b40e8f6a64065447ff1
NAS-IP-Address = 10.XX.XX.123
(2) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=135, length=296
(2) User-Name = 'Matthew West'
(2) Service-Type = Framed-User
(2) Framed-MTU = 1500
(2) Called-Station-Id = '08-CC-68-D5-1F-1E'
(2) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(2) EAP-Message =
0x020300830d8000000079160301007401000070030157daf0f51eadd7de5db40012697b728872abb32aeb089e917205c1039184af0100002800ffc024c023c00ac009c008c028c027c014c013c012003d003c0035002f000ac007c011000500040100001f000a00080006001700180019000b0002010000050005010000000000120000
(2) Message-Authenticator = 0x010e40a8c50f910938cef9cb3eaaf713
(2) NAS-Port-Type = Ethernet
(2) NAS-Port = 50130
(2) NAS-Port-Id = 'GigabitEthernet1/0/30'
(2) State = 0xcb099606ca0a9b40e8f6a64065447ff1
(2) NAS-IP-Address = 10.XX.XX.123
(2) # Executing section authorize from file /etc/raddb/sites-enabled/default
(2) authorize {
(2) filter_username filter_username {
(2) if (!&User-Name)
(2) if (!&User-Name) -> FALSE
(2) if (&User-Name =~ /@.*@/ )
(2) if (&User-Name =~ /@.*@/ ) -> FALSE
(2) if (&User-Name =~ /\\.\\./ )
(2) if (&User-Name =~ /\\.\\./ ) -> FALSE
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(2) if (&User-Name =~ /\\.$/)
(2) if (&User-Name =~ /\\.$/) -> FALSE
(2) if (&User-Name =~ /@\\./)
(2) if (&User-Name =~ /@\\./) -> FALSE
(2) } # filter_username filter_username = notfound
(2) [preprocess] = ok
(2) [chap] = noop
(2) [mschap] = noop
(2) [digest] = noop
(2) suffix : Checking for suffix after "@"
(2) suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(2) suffix : No such realm "NULL"
(2) [suffix] = noop
(2) eap : Peer sent code Response (2) ID 3 length 131
(2) eap : No EAP Start, assuming it's an on-going EAP conversation
(2) [eap] = updated
(2) [files] = noop
(2) [expiration] = noop
(2) [logintime] = noop
(2) [pap] = noop
(2) } # authorize = updated
(2) Found Auth-Type = EAP
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2) authenticate {
(2) eap : Expiring EAP session with state 0xcb099606ca0a9b40
(2) eap : Finished EAP session with state 0xcb099606ca0a9b40
(2) eap : Previous EAP request found for state 0xcb099606ca0a9b40,
released from the list
(2) eap : Peer sent method TLS (13)
(2) eap : EAP TLS (13)
(2) eap : Calling eap_tls to process EAP data
(2) eap_tls : Authenticate
(2) eap_tls : processing EAP-TLS
TLS Length 121
(2) eap_tls : Length Included
(2) eap_tls : eaptls_verify returned 11
(2) eap_tls : (other): before/accept initialization
(2) eap_tls : TLS_accept: before/accept initialization
(2) eap_tls : <<< TLS 1.0 Handshake [length 0074], ClientHello
(2) eap_tls : TLS_accept: SSLv3 read client hello A
(2) eap_tls : >>> TLS 1.0 Handshake [length 0059], ServerHello
(2) eap_tls : TLS_accept: SSLv3 write server hello A
(2) eap_tls : >>> TLS 1.0 Handshake [length 0540], Certificate
(2) eap_tls : TLS_accept: SSLv3 write certificate A
(2) eap_tls : >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange
(2) eap_tls : TLS_accept: SSLv3 write key exchange A
(2) eap_tls : >>> TLS 1.0 Handshake [length 0271], CertificateRequest
(2) eap_tls : TLS_accept: SSLv3 write certificate request A
(2) eap_tls : TLS_accept: SSLv3 flush data
(2) eap_tls : TLS_accept: Need to read more data: SSLv3 read client
certificate A
In SSL Handshake Phase
In SSL Accept mode
(2) eap_tls : eaptls_process returned 13
(2) eap : New EAP session, adding 'State' attribute to reply 0xcb099606c90d9b40
(2) [eap] = handled
(2) } # authenticate = handled
(2) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=135, length=0
(2) EAP-Message =
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
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0xcb099606c90d9b40e8f6a64065447ff1
Sending Access-Challenge Id 135 from 10.XX.XX.122:1812 to 10.XX.XX.123:1645
EAP-Message = 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
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xcb099606c90d9b40e8f6a64065447ff1
(2) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 136 from 10.XX.XX.123:1645 to
10.XX.XX.122:1812 length 171
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 0x020400060d00
Message-Authenticator = 0x0dc254eaca183dac69d5138c05670a06
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xcb099606c90d9b40e8f6a64065447ff1
NAS-IP-Address = 10.XX.XX.123
(3) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=136, length=171
(3) User-Name = 'Matthew West'
(3) Service-Type = Framed-User
(3) Framed-MTU = 1500
(3) Called-Station-Id = '08-CC-68-D5-1F-1E'
(3) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(3) EAP-Message = 0x020400060d00
(3) Message-Authenticator = 0x0dc254eaca183dac69d5138c05670a06
(3) NAS-Port-Type = Ethernet
(3) NAS-Port = 50130
(3) NAS-Port-Id = 'GigabitEthernet1/0/30'
(3) State = 0xcb099606c90d9b40e8f6a64065447ff1
(3) NAS-IP-Address = 10.XX.XX.123
(3) # Executing section authorize from file /etc/raddb/sites-enabled/default
(3) authorize {
(3) filter_username filter_username {
(3) if (!&User-Name)
(3) if (!&User-Name) -> FALSE
(3) if (&User-Name =~ /@.*@/ )
(3) if (&User-Name =~ /@.*@/ ) -> FALSE
(3) if (&User-Name =~ /\\.\\./ )
(3) if (&User-Name =~ /\\.\\./ ) -> FALSE
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(3) if (&User-Name =~ /\\.$/)
(3) if (&User-Name =~ /\\.$/) -> FALSE
(3) if (&User-Name =~ /@\\./)
(3) if (&User-Name =~ /@\\./) -> FALSE
(3) } # filter_username filter_username = notfound
(3) [preprocess] = ok
(3) [chap] = noop
(3) [mschap] = noop
(3) [digest] = noop
(3) suffix : Checking for suffix after "@"
(3) suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(3) suffix : No such realm "NULL"
(3) [suffix] = noop
(3) eap : Peer sent code Response (2) ID 4 length 6
(3) eap : No EAP Start, assuming it's an on-going EAP conversation
(3) [eap] = updated
(3) [files] = noop
(3) [expiration] = noop
(3) [logintime] = noop
(3) [pap] = noop
(3) } # authorize = updated
(3) Found Auth-Type = EAP
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3) authenticate {
(3) eap : Expiring EAP session with state 0xcb099606c90d9b40
(3) eap : Finished EAP session with state 0xcb099606c90d9b40
(3) eap : Previous EAP request found for state 0xcb099606c90d9b40,
released from the list
(3) eap : Peer sent method TLS (13)
(3) eap : EAP TLS (13)
(3) eap : Calling eap_tls to process EAP data
(3) eap_tls : Authenticate
(3) eap_tls : processing EAP-TLS
(3) eap_tls : Received TLS ACK
(3) eap_tls : Received TLS ACK
(3) eap_tls : ACK handshake fragment handler
(3) eap_tls : eaptls_verify returned 1
(3) eap_tls : eaptls_process returned 13
(3) eap : New EAP session, adding 'State' attribute to reply 0xcb099606c80c9b40
(3) [eap] = handled
(3) } # authenticate = handled
(3) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=136, length=0
(3) EAP-Message =
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
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0xcb099606c80c9b40e8f6a64065447ff1
Sending Access-Challenge Id 136 from 10.XX.XX.122:1812 to 10.XX.XX.123:1645
EAP-Message = 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
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xcb099606c80c9b40e8f6a64065447ff1
(3) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 137 from 10.XX.XX.123:1645 to
10.XX.XX.122:1812 length 171
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 0x020500060d00
Message-Authenticator = 0x9f221ff368053700df2aab6139ecd0a5
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xcb099606c80c9b40e8f6a64065447ff1
NAS-IP-Address = 10.XX.XX.123
(4) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=137, length=171
(4) User-Name = 'Matthew West'
(4) Service-Type = Framed-User
(4) Framed-MTU = 1500
(4) Called-Station-Id = '08-CC-68-D5-1F-1E'
(4) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(4) EAP-Message = 0x020500060d00
(4) Message-Authenticator = 0x9f221ff368053700df2aab6139ecd0a5
(4) NAS-Port-Type = Ethernet
(4) NAS-Port = 50130
(4) NAS-Port-Id = 'GigabitEthernet1/0/30'
(4) State = 0xcb099606c80c9b40e8f6a64065447ff1
(4) NAS-IP-Address = 10.XX.XX.123
(4) # Executing section authorize from file /etc/raddb/sites-enabled/default
(4) authorize {
(4) filter_username filter_username {
(4) if (!&User-Name)
(4) if (!&User-Name) -> FALSE
(4) if (&User-Name =~ /@.*@/ )
(4) if (&User-Name =~ /@.*@/ ) -> FALSE
(4) if (&User-Name =~ /\\.\\./ )
(4) if (&User-Name =~ /\\.\\./ ) -> FALSE
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(4) if (&User-Name =~ /\\.$/)
(4) if (&User-Name =~ /\\.$/) -> FALSE
(4) if (&User-Name =~ /@\\./)
(4) if (&User-Name =~ /@\\./) -> FALSE
(4) } # filter_username filter_username = notfound
(4) [preprocess] = ok
(4) [chap] = noop
(4) [mschap] = noop
(4) [digest] = noop
(4) suffix : Checking for suffix after "@"
(4) suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(4) suffix : No such realm "NULL"
(4) [suffix] = noop
(4) eap : Peer sent code Response (2) ID 5 length 6
(4) eap : No EAP Start, assuming it's an on-going EAP conversation
(4) [eap] = updated
(4) [files] = noop
(4) [expiration] = noop
(4) [logintime] = noop
(4) [pap] = noop
(4) } # authorize = updated
(4) Found Auth-Type = EAP
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4) authenticate {
(4) eap : Expiring EAP session with state 0xcb099606c80c9b40
(4) eap : Finished EAP session with state 0xcb099606c80c9b40
(4) eap : Previous EAP request found for state 0xcb099606c80c9b40,
released from the list
(4) eap : Peer sent method TLS (13)
(4) eap : EAP TLS (13)
(4) eap : Calling eap_tls to process EAP data
(4) eap_tls : Authenticate
(4) eap_tls : processing EAP-TLS
(4) eap_tls : Received TLS ACK
(4) eap_tls : Received TLS ACK
(4) eap_tls : ACK handshake fragment handler
(4) eap_tls : eaptls_verify returned 1
(4) eap_tls : eaptls_process returned 13
(4) eap : New EAP session, adding 'State' attribute to reply 0xcb099606cf0f9b40
(4) [eap] = handled
(4) } # authenticate = handled
(4) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=137, length=0
(4) EAP-Message =
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
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0xcb099606cf0f9b40e8f6a64065447ff1
Sending Access-Challenge Id 137 from 10.XX.XX.122:1812 to 10.XX.XX.123:1645
EAP-Message = 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
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xcb099606cf0f9b40e8f6a64065447ff1
(4) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 138 from 10.XX.XX.123:1645 to
10.XX.XX.122:1812 length 1451
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 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
Message-Authenticator = 0xe930b3b0ead1e12f587a5da884d6b94a
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xcb099606cf0f9b40e8f6a64065447ff1
NAS-IP-Address = 10.XX.XX.123
(5) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=138, length=1451
(5) User-Name = 'Matthew West'
(5) Service-Type = Framed-User
(5) Framed-MTU = 1500
(5) Called-Station-Id = '08-CC-68-D5-1F-1E'
(5) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(5) EAP-Message =
0x020604fc0dc00000139016030111fa0b0011f60011f3000769308207653082064da0030201020210181ddca644a326886c48039b989b0ef3300d06092a864886f70d01010505003081c9310b3009060355040613025553311d301b060355040a131453796d616e74656320436f72706f726174696f6e311f301d060355040b131653796d616e746563205472757374204e6574776f726b31353033060355040b132c436c6173732032204d616e6167656420504b4920496e646976696475616c2053756273637269626572204341314330410603550403133a53796d616e74656320436c61737320322053686172656420496e7465726d65646961746520436572746966696361746520417574686f72697479301e170d3136303230323030303030305a170d3138303230313233353935395a30753115301306035504030c0c4d6174746865772057657374310f300d060355040b0c06532f4d494d453120301e060355040a0c175961616e6120546563686e6f6c6f676965732c204c4c433129302706092a864886f70d010901161a6d6174746865772e77657374407961616e61746563682e636f6d30820122300d06092a864886f70d01010105000382010f003082010a0282010100d029e7e78636ab2bb56a797b548157f0b285462820c2c4e9e40e0d01bd6c9e94bdada6d32526d452f3511c62
(5) Message-Authenticator = 0xe930b3b0ead1e12f587a5da884d6b94a
(5) NAS-Port-Type = Ethernet
(5) NAS-Port = 50130
(5) NAS-Port-Id = 'GigabitEthernet1/0/30'
(5) State = 0xcb099606cf0f9b40e8f6a64065447ff1
(5) NAS-IP-Address = 10.XX.XX.123
(5) # Executing section authorize from file /etc/raddb/sites-enabled/default
(5) authorize {
(5) filter_username filter_username {
(5) if (!&User-Name)
(5) if (!&User-Name) -> FALSE
(5) if (&User-Name =~ /@.*@/ )
(5) if (&User-Name =~ /@.*@/ ) -> FALSE
(5) if (&User-Name =~ /\\.\\./ )
(5) if (&User-Name =~ /\\.\\./ ) -> FALSE
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(5) if (&User-Name =~ /\\.$/)
(5) if (&User-Name =~ /\\.$/) -> FALSE
(5) if (&User-Name =~ /@\\./)
(5) if (&User-Name =~ /@\\./) -> FALSE
(5) } # filter_username filter_username = notfound
(5) [preprocess] = ok
(5) [chap] = noop
(5) [mschap] = noop
(5) [digest] = noop
(5) suffix : Checking for suffix after "@"
(5) suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(5) suffix : No such realm "NULL"
(5) [suffix] = noop
(5) eap : Peer sent code Response (2) ID 6 length 1276
(5) eap : No EAP Start, assuming it's an on-going EAP conversation
(5) [eap] = updated
(5) [files] = noop
(5) [expiration] = noop
(5) [logintime] = noop
(5) [pap] = noop
(5) } # authorize = updated
(5) Found Auth-Type = EAP
(5) # Executing group from file /etc/raddb/sites-enabled/default
(5) authenticate {
(5) eap : Expiring EAP session with state 0xcb099606cf0f9b40
(5) eap : Finished EAP session with state 0xcb099606cf0f9b40
(5) eap : Previous EAP request found for state 0xcb099606cf0f9b40,
released from the list
(5) eap : Peer sent method TLS (13)
(5) eap : EAP TLS (13)
(5) eap : Calling eap_tls to process EAP data
(5) eap_tls : Authenticate
(5) eap_tls : processing EAP-TLS
TLS Length 5008
(5) eap_tls : Received EAP-TLS First Fragment of the message
(5) eap_tls : eaptls_verify returned 9
(5) eap_tls : eaptls_process returned 13
(5) eap : New EAP session, adding 'State' attribute to reply 0xcb099606ce0e9b40
(5) [eap] = handled
(5) } # authenticate = handled
(5) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=138, length=0
(5) EAP-Message = 0x010700060d00
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0xcb099606ce0e9b40e8f6a64065447ff1
Sending Access-Challenge Id 138 from 10.XX.XX.122:1812 to 10.XX.XX.123:1645
EAP-Message = 0x010700060d00
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xcb099606ce0e9b40e8f6a64065447ff1
(5) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 139 from 10.XX.XX.123:1645 to
10.XX.XX.122:1812 length 1451
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 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
Message-Authenticator = 0xe3530309155961a62c3d3f31d8bac005
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xcb099606ce0e9b40e8f6a64065447ff1
NAS-IP-Address = 10.XX.XX.123
(6) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=139, length=1451
(6) User-Name = 'Matthew West'
(6) Service-Type = Framed-User
(6) Framed-MTU = 1500
(6) Called-Station-Id = '08-CC-68-D5-1F-1E'
(6) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(6) EAP-Message =
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
(6) Message-Authenticator = 0xe3530309155961a62c3d3f31d8bac005
(6) NAS-Port-Type = Ethernet
(6) NAS-Port = 50130
(6) NAS-Port-Id = 'GigabitEthernet1/0/30'
(6) State = 0xcb099606ce0e9b40e8f6a64065447ff1
(6) NAS-IP-Address = 10.XX.XX.123
(6) # Executing section authorize from file /etc/raddb/sites-enabled/default
(6) authorize {
(6) filter_username filter_username {
(6) if (!&User-Name)
(6) if (!&User-Name) -> FALSE
(6) if (&User-Name =~ /@.*@/ )
(6) if (&User-Name =~ /@.*@/ ) -> FALSE
(6) if (&User-Name =~ /\\.\\./ )
(6) if (&User-Name =~ /\\.\\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(6) if (&User-Name =~ /\\.$/)
(6) if (&User-Name =~ /\\.$/) -> FALSE
(6) if (&User-Name =~ /@\\./)
(6) if (&User-Name =~ /@\\./) -> FALSE
(6) } # filter_username filter_username = notfound
(6) [preprocess] = ok
(6) [chap] = noop
(6) [mschap] = noop
(6) [digest] = noop
(6) suffix : Checking for suffix after "@"
(6) suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(6) suffix : No such realm "NULL"
(6) [suffix] = noop
(6) eap : Peer sent code Response (2) ID 7 length 1276
(6) eap : No EAP Start, assuming it's an on-going EAP conversation
(6) [eap] = updated
(6) [files] = noop
(6) [expiration] = noop
(6) [logintime] = noop
(6) [pap] = noop
(6) } # authorize = updated
(6) Found Auth-Type = EAP
(6) # Executing group from file /etc/raddb/sites-enabled/default
(6) authenticate {
(6) eap : Expiring EAP session with state 0xcb099606ce0e9b40
(6) eap : Finished EAP session with state 0xcb099606ce0e9b40
(6) eap : Previous EAP request found for state 0xcb099606ce0e9b40,
released from the list
(6) eap : Peer sent method TLS (13)
(6) eap : EAP TLS (13)
(6) eap : Calling eap_tls to process EAP data
(6) eap_tls : Authenticate
(6) eap_tls : processing EAP-TLS
(6) eap_tls : More fragments to follow
(6) eap_tls : eaptls_verify returned 10
(6) eap_tls : eaptls_process returned 13
(6) eap : New EAP session, adding 'State' attribute to reply 0xcb099606cd019b40
(6) [eap] = handled
(6) } # authenticate = handled
(6) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=139, length=0
(6) EAP-Message = 0x010800060d00
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0xcb099606cd019b40e8f6a64065447ff1
Sending Access-Challenge Id 139 from 10.XX.XX.122:1812 to 10.XX.XX.123:1645
EAP-Message = 0x010800060d00
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xcb099606cd019b40e8f6a64065447ff1
(6) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 140 from 10.XX.XX.123:1645 to
10.XX.XX.122:1812 length 1451
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 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
Message-Authenticator = 0x7f94ea524fbb0de7257f866e98f6493e
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xcb099606cd019b40e8f6a64065447ff1
NAS-IP-Address = 10.XX.XX.123
(7) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=140, length=1451
(7) User-Name = 'Matthew West'
(7) Service-Type = Framed-User
(7) Framed-MTU = 1500
(7) Called-Station-Id = '08-CC-68-D5-1F-1E'
(7) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(7) EAP-Message =
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
(7) Message-Authenticator = 0x7f94ea524fbb0de7257f866e98f6493e
(7) NAS-Port-Type = Ethernet
(7) NAS-Port = 50130
(7) NAS-Port-Id = 'GigabitEthernet1/0/30'
(7) State = 0xcb099606cd019b40e8f6a64065447ff1
(7) NAS-IP-Address = 10.XX.XX.123
(7) # Executing section authorize from file /etc/raddb/sites-enabled/default
(7) authorize {
(7) filter_username filter_username {
(7) if (!&User-Name)
(7) if (!&User-Name) -> FALSE
(7) if (&User-Name =~ /@.*@/ )
(7) if (&User-Name =~ /@.*@/ ) -> FALSE
(7) if (&User-Name =~ /\\.\\./ )
(7) if (&User-Name =~ /\\.\\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(7) if (&User-Name =~ /\\.$/)
(7) if (&User-Name =~ /\\.$/) -> FALSE
(7) if (&User-Name =~ /@\\./)
(7) if (&User-Name =~ /@\\./) -> FALSE
(7) } # filter_username filter_username = notfound
(7) [preprocess] = ok
(7) [chap] = noop
(7) [mschap] = noop
(7) [digest] = noop
(7) suffix : Checking for suffix after "@"
(7) suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(7) suffix : No such realm "NULL"
(7) [suffix] = noop
(7) eap : Peer sent code Response (2) ID 8 length 1276
(7) eap : No EAP Start, assuming it's an on-going EAP conversation
(7) [eap] = updated
(7) [files] = noop
(7) [expiration] = noop
(7) [logintime] = noop
(7) [pap] = noop
(7) } # authorize = updated
(7) Found Auth-Type = EAP
(7) # Executing group from file /etc/raddb/sites-enabled/default
(7) authenticate {
(7) eap : Expiring EAP session with state 0xcb099606cd019b40
(7) eap : Finished EAP session with state 0xcb099606cd019b40
(7) eap : Previous EAP request found for state 0xcb099606cd019b40,
released from the list
(7) eap : Peer sent method TLS (13)
(7) eap : EAP TLS (13)
(7) eap : Calling eap_tls to process EAP data
(7) eap_tls : Authenticate
(7) eap_tls : processing EAP-TLS
(7) eap_tls : More fragments to follow
(7) eap_tls : eaptls_verify returned 10
(7) eap_tls : eaptls_process returned 13
(7) eap : New EAP session, adding 'State' attribute to reply 0xcb099606cc009b40
(7) [eap] = handled
(7) } # authenticate = handled
(7) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=140, length=0
(7) EAP-Message = 0x010900060d00
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) State = 0xcb099606cc009b40e8f6a64065447ff1
Sending Access-Challenge Id 140 from 10.XX.XX.122:1812 to 10.XX.XX.123:1645
EAP-Message = 0x010900060d00
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xcb099606cc009b40e8f6a64065447ff1
(7) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 141 from 10.XX.XX.123:1645 to
10.XX.XX.122:1812 length 1381
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 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
Message-Authenticator = 0x7cf991c319cfbb74d963ab8c6e4480e0
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xcb099606cc009b40e8f6a64065447ff1
NAS-IP-Address = 10.XX.XX.123
(8) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=141, length=1381
(8) User-Name = 'Matthew West'
(8) Service-Type = Framed-User
(8) Framed-MTU = 1500
(8) Called-Station-Id = '08-CC-68-D5-1F-1E'
(8) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(8) EAP-Message =
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
(8) Message-Authenticator = 0x7cf991c319cfbb74d963ab8c6e4480e0
(8) NAS-Port-Type = Ethernet
(8) NAS-Port = 50130
(8) NAS-Port-Id = 'GigabitEthernet1/0/30'
(8) State = 0xcb099606cc009b40e8f6a64065447ff1
(8) NAS-IP-Address = 10.XX.XX.123
(8) # Executing section authorize from file /etc/raddb/sites-enabled/default
(8) authorize {
(8) filter_username filter_username {
(8) if (!&User-Name)
(8) if (!&User-Name) -> FALSE
(8) if (&User-Name =~ /@.*@/ )
(8) if (&User-Name =~ /@.*@/ ) -> FALSE
(8) if (&User-Name =~ /\\.\\./ )
(8) if (&User-Name =~ /\\.\\./ ) -> FALSE
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(8) if (&User-Name =~ /\\.$/)
(8) if (&User-Name =~ /\\.$/) -> FALSE
(8) if (&User-Name =~ /@\\./)
(8) if (&User-Name =~ /@\\./) -> FALSE
(8) } # filter_username filter_username = notfound
(8) [preprocess] = ok
(8) [chap] = noop
(8) [mschap] = noop
(8) [digest] = noop
(8) suffix : Checking for suffix after "@"
(8) suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(8) suffix : No such realm "NULL"
(8) [suffix] = noop
(8) eap : Peer sent code Response (2) ID 9 length 1208
(8) eap : No EAP Start, assuming it's an on-going EAP conversation
(8) [eap] = updated
(8) [files] = noop
(8) [expiration] = noop
(8) [logintime] = noop
(8) [pap] = noop
(8) } # authorize = updated
(8) Found Auth-Type = EAP
(8) # Executing group from file /etc/raddb/sites-enabled/default
(8) authenticate {
(8) eap : Expiring EAP session with state 0xcb099606cc009b40
(8) eap : Finished EAP session with state 0xcb099606cc009b40
(8) eap : Previous EAP request found for state 0xcb099606cc009b40,
released from the list
(8) eap : Peer sent method TLS (13)
(8) eap : EAP TLS (13)
(8) eap : Calling eap_tls to process EAP data
(8) eap_tls : Authenticate
(8) eap_tls : processing EAP-TLS
(8) eap_tls : eaptls_verify returned 7
(8) eap_tls : Done initial handshake
(8) eap_tls : <<< TLS 1.0 Handshake [length 11fa], Certificate
(8) eap_tls : chain-depth=2,
(8) eap_tls : error=0
(8) eap_tls : --> User-Name = Matthew West
(8) eap_tls : --> BUF-Name = VeriSign Class 2 Public Primary
Certification Authority - G3
(8) eap_tls : --> subject = /C=US/O=VeriSign, Inc./OU=VeriSign Trust
Network/OU=(c) 1999 VeriSign, Inc. - For authorized use
only/CN=VeriSign Class 2 Public Primary Certification Authority - G3
(8) eap_tls : --> issuer = /C=US/O=VeriSign, Inc./OU=VeriSign Trust
Network/OU=(c) 1999 VeriSign, Inc. - For authorized use
only/CN=VeriSign Class 2 Public Primary Certification Authority - G3
(8) eap_tls : --> verify return:1
(8) eap_tls : chain-depth=1,
(8) eap_tls : error=0
(8) eap_tls : --> User-Name = Matthew West
(8) eap_tls : --> BUF-Name = Symantec Class 2 Shared Intermediate
Certificate Authority
(8) eap_tls : --> subject = /C=US/O=Symantec Corporation/OU=Symantec
Trust Network/OU=Class 2 Managed PKI Individual Subscriber
CA/CN=Symantec Class 2 Shared Intermediate Certificate Authority
(8) eap_tls : --> issuer = /C=US/O=VeriSign, Inc./OU=VeriSign Trust
Network/OU=(c) 1999 VeriSign, Inc. - For authorized use
only/CN=VeriSign Class 2 Public Primary Certification Authority - G3
(8) eap_tls : --> verify return:1
(8) eap_tls : chain-depth=0,
(8) eap_tls : error=0
(8) eap_tls : --> User-Name = Matthew West
(8) eap_tls : --> BUF-Name = Matthew West
(8) eap_tls : --> subject = /CN=Matthew West/OU=S/MIME/O=ACME,
LLC/emailAddress=matthew.west at acme.com
(8) eap_tls : --> issuer = /C=US/O=Symantec Corporation/OU=Symantec
Trust Network/OU=Class 2 Managed PKI Individual Subscriber
CA/CN=Symantec Class 2 Shared Intermediate Certificate Authority
(8) eap_tls : --> verify return:1
(8) eap_tls : TLS_accept: SSLv3 read client certificate A
(8) eap_tls : <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange
(8) eap_tls : TLS_accept: SSLv3 read client key exchange A
(8) eap_tls : <<< TLS 1.0 Handshake [length 0106], CertificateVerify
(8) eap_tls : TLS_accept: SSLv3 read certificate verify A
(8) eap_tls : <<< TLS 1.0 ChangeCipherSpec [length 0001]
(8) eap_tls : <<< TLS 1.0 Handshake [length 0010], Finished
(8) eap_tls : TLS_accept: SSLv3 read finished A
(8) eap_tls : >>> TLS 1.0 ChangeCipherSpec [length 0001]
(8) eap_tls : TLS_accept: SSLv3 write change cipher spec A
(8) eap_tls : >>> TLS 1.0 Handshake [length 0010], Finished
(8) eap_tls : TLS_accept: SSLv3 write finished A
(8) eap_tls : TLS_accept: SSLv3 flush data
SSL: adding session
45b4b4e80c3a1ece903ef5c033bdfb1b31a1064c783340b92b27167cfbfa33cc to
cache
(8) eap_tls : (other): SSL negotiation finished successfully
SSL Connection Established
(8) eap_tls : eaptls_process returned 13
(8) eap : New EAP session, adding 'State' attribute to reply 0xcb099606c3039b40
(8) [eap] = handled
(8) } # authenticate = handled
(8) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=141, length=0
(8) EAP-Message =
0x010a00450d800000003b140301000101160301003098b5a8a007cbe989b59e222bed916565c9831178a6191e2148e12c19771d1043baf53a59b00f3ea6e0798afce0c45564
(8) Message-Authenticator = 0x00000000000000000000000000000000
(8) State = 0xcb099606c3039b40e8f6a64065447ff1
Sending Access-Challenge Id 141 from 10.XX.XX.122:1812 to 10.XX.XX.123:1645
EAP-Message = 0x010a00450d800000003b140301000101160301003098b5a8a007cbe989b59e222bed916565c9831178a6191e2148e12c19771d1043baf53a59b00f3ea6e0798afce0c45564
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xcb099606c3039b40e8f6a64065447ff1
(8) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 142 from 10.XX.XX.123:1645 to
10.XX.XX.122:1812 length 171
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 0x020a00060d00
Message-Authenticator = 0x0bc0f41939f41ae1ec047e25a2c015b6
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xcb099606c3039b40e8f6a64065447ff1
NAS-IP-Address = 10.XX.XX.123
(9) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=142, length=171
(9) User-Name = 'Matthew West'
(9) Service-Type = Framed-User
(9) Framed-MTU = 1500
(9) Called-Station-Id = '08-CC-68-D5-1F-1E'
(9) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(9) EAP-Message = 0x020a00060d00
(9) Message-Authenticator = 0x0bc0f41939f41ae1ec047e25a2c015b6
(9) NAS-Port-Type = Ethernet
(9) NAS-Port = 50130
(9) NAS-Port-Id = 'GigabitEthernet1/0/30'
(9) State = 0xcb099606c3039b40e8f6a64065447ff1
(9) NAS-IP-Address = 10.XX.XX.123
(9) # Executing section authorize from file /etc/raddb/sites-enabled/default
(9) authorize {
(9) filter_username filter_username {
(9) if (!&User-Name)
(9) if (!&User-Name) -> FALSE
(9) if (&User-Name =~ /@.*@/ )
(9) if (&User-Name =~ /@.*@/ ) -> FALSE
(9) if (&User-Name =~ /\\.\\./ )
(9) if (&User-Name =~ /\\.\\./ ) -> FALSE
(9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
(9) if (&User-Name =~ /\\.$/)
(9) if (&User-Name =~ /\\.$/) -> FALSE
(9) if (&User-Name =~ /@\\./)
(9) if (&User-Name =~ /@\\./) -> FALSE
(9) } # filter_username filter_username = notfound
(9) [preprocess] = ok
(9) [chap] = noop
(9) [mschap] = noop
(9) [digest] = noop
(9) suffix : Checking for suffix after "@"
(9) suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(9) suffix : No such realm "NULL"
(9) [suffix] = noop
(9) eap : Peer sent code Response (2) ID 10 length 6
(9) eap : No EAP Start, assuming it's an on-going EAP conversation
(9) [eap] = updated
(9) [files] = noop
(9) [expiration] = noop
(9) [logintime] = noop
(9) [pap] = noop
(9) } # authorize = updated
(9) Found Auth-Type = EAP
(9) # Executing group from file /etc/raddb/sites-enabled/default
(9) authenticate {
(9) eap : Expiring EAP session with state 0xcb099606c3039b40
(9) eap : Finished EAP session with state 0xcb099606c3039b40
(9) eap : Previous EAP request found for state 0xcb099606c3039b40,
released from the list
(9) eap : Peer sent method TLS (13)
(9) eap : EAP TLS (13)
(9) eap : Calling eap_tls to process EAP data
(9) eap_tls : Authenticate
(9) eap_tls : processing EAP-TLS
(9) eap_tls : Received TLS ACKacme.com
(9) eap_tls : Received TLS ACK
(9) eap_tls : ACK handshake is finished
(9) eap_tls : eaptls_verify returned 3
(9) eap_tls : eaptls_process returned 3
(9) eap_tls : Saving session
45b4b4e80c3a1ece903ef5c033bdfb1b31a1064c783340b92b27167cfbfa33cc vps
0x7fc49b47bfc0 in the cache
(9) eap : Freeing handler
(9) [eap] = ok
(9) } # authenticate = ok
(9) # Executing section post-auth from file /etc/raddb/sites-enabled/default
(9) post-auth {
(9) [exec] = noop
(9) remove_reply_message_if_eap remove_reply_message_if_eap {
(9) if (&reply:EAP-Message && &reply:Reply-Message)
(9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(9) else else {
(9) [noop] = noop
(9) } # else else = noop
(9) } # remove_reply_message_if_eap remove_reply_message_if_eap = noop
(9) } # post-auth = noop
(9) Sending Access-Accept packet to host 10.XX.XX.123 port 1645,
id=142, length=0
(9) MS-MPPE-Recv-Key =
0xeb887eaf72939e58fae2147939a03b51de21d1cb3bc69b8e46ba406426d07345
(9) MS-MPPE-Send-Key =
0x52c1dd809ce41f3591bd2028ae7e0cf31824cbefca9617d3b3818196f25ac576
(9) EAP-MSK = 0xeb887eaf72939e58fae2147939a03b51de21d1cb3bc69b8e46ba406426d0734552c1dd809ce41f3591bd2028ae7e0cf31824cbefca9617d3b3818196f25ac576
(9) EAP-EMSK = 0xfe0088f987445ceb80f3c5e6098c520be1fcfe464dea583e10085e56d38b5442a233ab4fe163467da38027438d23ddde5d472a41422c9e608a6b66927c22dadd
(9) EAP-Session-Id =
0x0d57daf0f51eadd7de5db40012697b728872abb32aeb089e917205c1039184af0157daf9e86e333d8345ad6964e21410218d4cd490cdc5d07696ed274875e58228
(9) EAP-Message = 0x030a0004
(9) Message-Authenticator = 0x00000000000000000000000000000000
(9) User-Name = 'Matthew West'
Sending Access-Accept Id 142 from 10.XX.XX.122:1812 to 10.XX.XX.123:1645
MS-MPPE-Recv-Key =
0xeb887eaf72939e58fae2147939a03b51de21d1cb3bc69b8e46ba406426d07345
MS-MPPE-Send-Key =
0x52c1dd809ce41f3591bd2028ae7e0cf31824cbefca9617d3b3818196f25ac576
EAP-Message = 0x030a0004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = 'Matthew West'
(9) Finished request
Waking up in 0.2 seconds.
Waking up in 4.5 seconds.
(0) Cleaning up request packet ID 133 with timestamp +46
(1) Cleaning up request packet ID 134 with timestamp +46
(2) Cleaning up request packet ID 135 with timestamp +46
(3) Cleaning up request packet ID 136 with timestamp +46
(4) Cleaning up request packet ID 137 with timestamp +46
(5) Cleaning up request packet ID 138 with timestamp +46
(6) Cleaning up request packet ID 139 with timestamp +46
(7) Cleaning up request packet ID 140 with timestamp +46
(8) Cleaning up request packet ID 141 with timestamp +46
(9) Cleaning up request packet ID 142 with timestamp +46
Ready to process requests
On Thu, Sep 15, 2016 at 10:06 AM, Matthew West <matthew.t.west at gmail.com> wrote:
>> The value in the Auth-Type attribute matters when the group is exited, not before.
>
> OK, thank you for confirming.
>
> Checking out the free radius unlang page again. Starting to make more sense.
>
> Thank You,
>
> Matthew
>
>
> On Thu, Sep 15, 2016 at 10:04 AM, Matthew Newton <mcn4 at leicester.ac.uk> wrote:
>> On Thu, Sep 15, 2016 at 09:38:25AM -0700, Matthew West wrote:
>>> Will the process run through the whole virtual server file before
>>> returning the Auth-Type? Is that why one can set an accept after a
>>> reject?
>>
>> The value in the Auth-Type attribute matters when the group is
>> exited, not before.
>>
>> Matthew
>>
>>
>> --
>> Matthew Newton, Ph.D. <mcn4 at leicester.ac.uk>
>>
>> Systems Specialist, Infrastructure Services,
>> I.T. Services, University of Leicester, Leicester LE1 7RH, United Kingdom
>>
>> For IT help contact helpdesk extn. 2253, <ithelp at le.ac.uk>
>> -
>> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list