Home server stats

[Alan Buxey]

When I was last looking at that stuff I noted that you had to turn on
verbose/debug in the radclient options to get values out. YMMV

Alan

On 4 Jul 2017 5:40 pm, "Phil Mayers" <p.mayers at imperial.ac.uk> wrote:

> All,
>
> I'm poking at a difference b/w 2.2.x and 3.0.x, specifically using a stats
> query of the following form:
>
> FreeRADIUS-Statistics-Type = 0x81
> FreeRADIUS-Stats-Server-IP-Address = 194.83.56.233
> FreeRADIUS-Stats-Server-Port = 1812
> Message-Authenticator = 0x00
>
> ...which returns an empty success packet on 3.x but works on 2.2.x. A
> quick gdb session suggests that home_server_find is returning null in
> stats.c:
>
> https://github.com/FreeRADIUS/freeradius-server/blob/v3.0.x/
> src/main/stats.c#L742
>
> ...but I am sure that the home server is defined in proxy.conf:
>
> home_server roaming1 {
>         type            = auth
>         ipaddr          = 194.83.56.233
>         port            = 1812
>         secret          = <secret>
>         status_check    = status-server
>         num_answers_to_alive = 3
> }
>
> home_server_pool eduroam {
>         type = client-port-balance
>         home_server = roaming0
>         home_server = roaming1
>         home_server = roaming2
> }
>
> realm EDUROAM {
>         auth_pool = eduroam
>         nostrip
> }
>
> Interestingly "radmin" shows the stats as "unknown" continually as far as
> I can tell, but does know about the server:
>
> radmin> show home_server list
> 194.83.56.233   1812    udp     auth    unknown 0
>
> Is there some obvious config I'm missing?
>
> Cheers,
> Phil
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list
> /users.html