Freeradius Proxy - Framed IP Address Accounting attribute

[Byron Jeffery]

Hi

I have managed to resolve the issue with the client not receiving the DHCP
Offer as I may have set something in the config somewhere that was causing
the freeradius dhcp to return an offer to the gateway and not as a
broadcast.  I decided to start again and that resolved that issue.

Following from that, I would like to setup DHCP for multiple subnets/vlans,
however, is it recommended to setup a separate dhcp virtual server per vlan
or do a switch statement in the DHCP conf file switching to the relevant
ippool per vlan?


   - Kind Regards

   - Byron Jeffery
   - ICT Helpdesk Coordinator

------------------------------

   - Phone:0243636107
   - Mobile:043 230 7030
   - Fax:(07) 3889 7245
   - Office:Suite 304, 200 The Central Coast Hwy, Erina NSW 2250
   - Postal:PO Box 3101, Caboolture BC QLD 4510


------------------------------

The content of this message is provided without responsibility in law for
their accuracy or otherwise, and without assumption of a duty of care by
Australian Christian College. Whilst every attempt has been made to ensure
that material contained in this email is free from computer viruses or
other defects, the attached files are provided, and may only be used, on
the basis that the user assumes all responsibility for use of the material
transmitted. This email is intended only for the use of the individual or
entity names above and may contain information that is confidential and
privileged. If you are not the intended recipient, please note that any
dissemination, distribution or copying of this email is strictly
prohibited. If you have received this email in error, please notify us
immediately by return email and destroy the original message.

On Wed, Jul 12, 2017 at 10:04 PM, Alan DeKok <aland at deployingradius.com>
wrote:

> On Jul 12, 2017, at 2:21 AM, Byron Jeffery <byronjeffery at cem.org.au>
> wrote:
> > I have successfully managed to get the Freeradius DHCP server with a
> single
> > subnet linked to MySQL radius database.
>
>   That's good.
>
> > However, I have been stumped by an issue whereby a wireshark capture
> shows
> > the client sending out a DHCP Discover, the Freeradius DHCP server
> replying
> > with a DHCP-Offer with the correct IP address, but am not seeing the
> Offer
> > in the wireshark capture
>
>   What wireshark capture?  Where?
>
>   There isn't much magic here.  If FreeRADIUS sends a packet, it relies on
> the OS to send the packet.  If the packet disappears...  blame the OS /
> routing, not FreeRADIUS.
>
> > and hence the client not receiving the IP address
> > allocation.
> > My freeradius version is 3.0.12.
> > I am unsure of where else to look and was wondering if you may have any
> > further suggestions.
>
>   Track the packet out the interface that FreeRADIUS is using.  Then,
> track the packet hop by hop across the network.
>
>   Note that wireshark on the same machine MIGHT NOT see the outgoing
> packet.  It all depends on how the local network stack works.
>
>   Alan DeKok.
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/
> list/users.html
>