NAS login class to RADIUS authenticated ldap users
Darrain Waters
dwaters at bioteam.net
Sat Jun 24 23:53:20 CEST 2017
Hello
I need to map ldap authenticated (389directory) users to juniper nas local
accounts that all have different access rights. I clearly run the ldap
module, and do a group search to verify a user can access based on group.
Is it possible to take the group the ldap module finds and map it to a same
named account on the juniper nas ?
I want to avoid using the remote user id on the juniper nas with the access
class that I assign, and instead use the different accounts on the juniper
nas which are different access levels:
user-ro
user-op
user-su
I have not messed with the git pulled 3.0.14 config files other than ldap,
clients.conf and users file. See radiusd -X below for run info. In my
users file I have:
DEFAULT LDAP-Group == "admins", Auth-Type := Accept
Junipers instructions are as follow, which I have tried:
In this example a freeradius server is used (more info about freeradius at
http://freeradius.org/). The following users are configured in the file
/etc/freeradius/users on the freeradius server:
tom Cleartext-Password := "tom123"
Service-Type = Login-User,
Juniper-Local-User-Name := "readonly-users",
jerry Cleartext-Password := "jerry123"
Service-Type = Login-User,
Juniper-Local-User-Name := "super-users",
The VSA (vendor specific attribute) "Juniper-Local-User-Name" is used here.
This VSA is already present in file /usr/share/freeradius/dictionary.juniper by
default and does not need to be configured.
On the radius server in file /etc/freeradius/clients.conf the radius secret
and client IP address (in this case 0/0, so any IP address) is configured
like this example:
client 0/0 {
secret = juniper
shortname = JUNOS-devices
}
Thank you
FreeRADIUS Version 3.0.14
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/local/share/freeradius/dictionary
including dictionary file /usr/local/share/freeradius/dictionary.dhcp
including dictionary file /usr/local/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/date
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/ldap
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/expiration
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/abfab-tr
including configuration file /etc/raddb/policy.d/operator-name
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/moonshot-targeted-ids
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/control
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/inner-tunnel
including configuration file /etc/raddb/sites-enabled/default
main {
security {
allow_core_dumps = no
}
name = "radiusd"
prefix = "/usr/local"
localstatedir = "/usr/local/var"
logdir = "/var/log"
run_dir = "/usr/local/var/run/radiusd"
}
main {
name = "radiusd"
prefix = "/usr/local"
localstatedir = "/usr/local/var"
sbindir = "/usr/local/sbin"
logdir = "/var/log"
run_dir = "/usr/local/var/run/radiusd"
libdir = "/usr/local/lib"
radacctdir = "/var/log/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
checkrad = "/usr/local/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client scinet-login-node {
ipaddr = 10.1.4.46
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client mx480-nal-g04-1 {
ipaddr = 10.10.0.10
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "juniper"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client mx480-Albany-3036 {
ipaddr = 10.50.0.11
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "juniper"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client QFX5100-ALB-NWF1-IDF-1 {
ipaddr = 10.0.60.1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client QFX5100-ALB-Rm3034-1 {
ipaddr = 10.0.66.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "juniper"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client mx960-ames-core1 {
ipaddr = 10.10.0.11
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client mlxe16-CC-131-1 {
ipaddr = 10.20.0.11
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client mlx8e-SV-07 {
ipaddr = 10.30.0.11
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client mlxe16-ftc-3020-1 {
ipaddr = 10.40.0.11
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client SRX550-FTC-SCInet-Rm3020-1 {
ipaddr = 10.150.0.2
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "juniper"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
# Creating Auth-Type = mschap
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
# Creating Auth-Type = digest
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_exec
# Loading module "echo" from file /etc/raddb/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loaded module rlm_cache
# Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_soh
# Loading module "soh" from file /etc/raddb/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_files
# Loading module "files" from file /etc/raddb/mods-enabled/files
files {
filename = "/etc/raddb/mods-config/files/authorize"
acctusersfile = "/etc/raddb/mods-config/files/accounting"
preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
}
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file
/etc/raddb/mods-enabled/dynamic_clients
# Loaded module rlm_radutmp
# Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_always
# Loading module "reject" from file /etc/raddb/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/raddb/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/raddb/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/raddb/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/raddb/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/raddb/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/raddb/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/raddb/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/raddb/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_dhcp
# Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp
# Loaded module rlm_linelog
# Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
linelog {
filename = "/var/log/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
radutmp {
filename = "/var/log/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
# Loaded module rlm_detail
# Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
detail auth_log {
filename =
"/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
detail reply_log {
filename =
"/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
detail pre_proxy_log {
filename =
"/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
detail post_proxy_log {
filename =
"/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_unpack
# Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
# Loaded module rlm_expr
# Loading module "expr" from file /etc/raddb/mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/raddb/mods-enabled/chap
# Loaded module rlm_date
# Loading module "date" from file /etc/raddb/mods-enabled/date
date {
format = "%b %e %Y %H:%M:%S %Z"
utc = no
}
# Loaded module rlm_eap
# Loading module "eap" from file /etc/raddb/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loaded module rlm_logintime
# Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_ldap
# Loading module "ldap" from file /etc/raddb/mods-enabled/ldap
ldap {
server = "10.1.0.9"
identity = "cn=Directory Manager"
password = <<< secret >>>
sasl {
}
user {
scope = "sub"
access_positive = yes
sasl {
}
}
group {
filter = "(objectClass=posixGroup)"
scope = "sub"
name_attribute = "cn"
membership_attribute = "memberOf"
membership_filter =
"(memberof=%{control:Ldap-UserDn})(&(objectClass=GroupOfUniqueNames)(uniquemember=%{control:Ldap-UserDn}))"
cacheable_name = no
cacheable_dn = no
}
client {
filter = "(objectClass=radiusClient)"
scope = "sub"
base_dn = "cn=users,cn=accounts,dc=scinet,dc=ars,dc=usda,dc=gov"
}
profile {
}
options {
ldap_debug = 40
chase_referrals = yes
rebind = yes
net_timeout = 1
res_timeout = 10
srv_timelimit = 3
idle = 60
probes = 3
interval = 3
}
tls {
start_tls = no
}
}
Creating attribute LDAP-Group
# Loaded module rlm_pap
# Loading module "pap" from file /etc/raddb/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_replicate
# Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
# Loaded module rlm_digest
# Loading module "digest" from file /etc/raddb/mods-enabled/digest
# Loaded module rlm_preprocess
# Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
hints = "/etc/raddb/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_mschap
# Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loading module "exec" from file /etc/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loading module "detail" from file /etc/raddb/mods-enabled/detail
detail {
filename =
"/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/raddb/mods-enabled/unix
unix {
radwtmp = "/var/log/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_expiration
# Loading module "expiration" from file /etc/raddb/mods-enabled/expiration
instantiate {
}
# Instantiating module "etc_passwd" from file
/etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "cache_eap" from file
/etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
loaded and linked
# Instantiating module "files" from file /etc/raddb/mods-enabled/files
reading pairlist file /etc/raddb/mods-config/files/authorize
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
# Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
# Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
# Instantiating module "realmpercent" from file
/etc/raddb/mods-enabled/realm
# Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
# Instantiating module "reject" from file /etc/raddb/mods-enabled/always
# Instantiating module "fail" from file /etc/raddb/mods-enabled/always
# Instantiating module "ok" from file /etc/raddb/mods-enabled/always
# Instantiating module "handled" from file /etc/raddb/mods-enabled/always
# Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
# Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
# Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
# Instantiating module "noop" from file /etc/raddb/mods-enabled/always
# Instantiating module "updated" from file /etc/raddb/mods-enabled/always
# Instantiating module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
# Instantiating module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
# Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
# Instantiating module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
# Instantiating module "auth_log" from file
/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
# Instantiating module "reply_log" from file
/etc/raddb/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
# Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/etc/raddb/certs/server.pem"
certificate_file = "/etc/raddb/certs/server.pem"
ca_file = "/etc/raddb/certs/ca.pem"
private_key_password = <<< secret >>>
dh_file = "/etc/raddb/certs/dh"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
cipher_server_preference = no
ecdh_curve = "prime256v1"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "logintime" from file
/etc/raddb/mods-enabled/logintime
# Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20440
accounting {
reference = "%{tolower:type.%{Acct-Status-Type}}"
}
post-auth {
reference = "."
}
rlm_ldap (ldap): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
spread = no
}
rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots
used
rlm_ldap (ldap): Connecting to ldap://10.1.0.9:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots
used
rlm_ldap (ldap): Connecting to ldap://10.1.0.9:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots
used
rlm_ldap (ldap): Connecting to ldap://10.1.0.9:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots
used
rlm_ldap (ldap): Connecting to ldap://10.1.0.9:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots
used
rlm_ldap (ldap): Connecting to ldap://10.1.0.9:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
# Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
# Instantiating module "preprocess" from file
/etc/raddb/mods-enabled/preprocess
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
# Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
# Instantiating module "expiration" from file
/etc/raddb/mods-enabled/expiration
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
# Skipping contents of 'if' as it is always 'false' --
/etc/raddb/sites-enabled/inner-tunnel:331
} # server inner-tunnel
server default { # from file /etc/raddb/sites-enabled/default
# Loading authenticate {...}
# Loading authorize {...}
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
listen {
type = "auth"
ipaddr = 10.1.0.150
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 60
}
}
listen {
type = "acct"
ipaddr = 10.1.0.150
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address 10.1.0.150 port 1812 bound to server default
Listening on acct address 10.1.0.150 port 1813 bound to server default
Listening on proxy address * port 51049
Ready to process requests
1) Received Access-Request Id 70 from 10.10.0.10:51639 to 10.1.0.150:1812
length 112
(1) User-Name = "darrain.waters-admin"
(1) User-Password = "*"
(1) NAS-Identifier = "mx480-nal-g04-1"
(1) Calling-Station-Id = "10.99.99.10"
(1) NAS-IP-Address = 192.168.0.1
(1) # Executing section authorize from file /etc/raddb/sites-enabled/default
(1) authorize {
(1) policy filter_username {
(1) if (&User-Name) {
(1) if (&User-Name) -> TRUE
(1) if (&User-Name) {
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@[^@]*@/ ) {
(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # if (&User-Name) = notfound
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) auth_log: EXPAND
/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(1) auth_log: --> /var/log/radacct/10.10.0.10/auth-detail-20170624
(1) auth_log:
/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to /var/log/radacct/10.10.0.10/auth-detail-20170624
(1) auth_log: EXPAND %t
(1) auth_log: --> Sat Jun 24 16:46:10 2017
(1) [auth_log] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "darrain.waters-admin", looking up realm
NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) eap: No EAP-Message, not doing EAP
(1) [eap] = noop
rlm_ldap (ldap): Closing connection (2): Hit idle_timeout, was idle for 79
seconds
rlm_ldap (ldap): Closing connection (3): Hit idle_timeout, was idle for 79
seconds
rlm_ldap (ldap): Closing connection (4): Hit idle_timeout, was idle for 79
seconds
rlm_ldap (ldap): Reserved connection (0)
(1) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(1) ldap: --> (uid=darrain.waters-admin)
(1) ldap: Performing search in
"cn=users,cn=accounts,dc=scinet,dc=ars,dc=usda,dc=gov" with filter
"(uid=darrain.waters-admin)", scope "sub"
(1) ldap: Waiting for search result...
(1) ldap: User object found at DN
"uid=darrain.waters-admin,cn=users,cn=accounts,dc=scinet,dc=ars,dc=usda,dc=gov"
(1) ldap: Processing user attributes
(1) ldap: control:Password-With-Header +=
'{SSHA}xOm2VtJIOjqbxdDvam0B27+oqrLsRiBxfVZyaw=='
rlm_ldap (ldap): Released connection (0)
Need 7 more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (6), 1 of 29 pending slots
used
rlm_ldap (ldap): Connecting to ldap://10.1.0.9:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(1) [ldap] = updated
(1) files: Searching for user in group "admins"
rlm_ldap (ldap): Reserved connection (5)
(1) files: Using user DN from request
"uid=darrain.waters-admin,cn=users,cn=accounts,dc=scinet,dc=ars,dc=usda,dc=gov"
(1) files: Checking for user in group objects
(1) files: EXPAND
(&(cn=admins)(objectClass=posixGroup)(memberof=%{control:Ldap-UserDn})(&(objectClass=GroupOfUniqueNames)(uniquemember=%{control:Ldap-UserDn})))
(1) files: -->
(&(cn=admins)(objectClass=posixGroup)(memberof=uid\3ddarrain.waters-admin\2ccn\3dusers\2ccn\3daccounts\2cdc\3dscinet\2cdc\3dars\2cdc\3dusda\2cdc\3dgov)(&(objectClass=GroupOfUniqueNames)(uniquemember=uid\3ddarrain.waters-admin\2ccn\3dusers\2ccn\3daccounts\2cdc\3dscinet\2cdc\3dars\2cdc\3dusda\2cdc\3dgov)))
(1) files: Performing search in
"cn=users,cn=accounts,dc=scinet,dc=ars,dc=usda,dc=gov" with filter
"(&(cn=admins)(objectClass=posixGroup)(memberof=uid\3ddarrain.waters-admin\2ccn\3dusers\2ccn\3daccounts\2cdc\3dscinet\2cdc\3dars\2cdc\3dusda\2cdc\3dgov)(&(objectClass=GroupOfUniqueNames)(uniquemember=uid\3ddarrain.waters-admin\2ccn\3dusers\2ccn\3daccounts\2cdc\3dscinet\2cdc\3dars\2cdc\3dusda\2cdc\3dgov)))",
scope "sub"
(1) files: Waiting for search result...
(1) files: Search returned no results
(1) files: Checking user object's memberOf attributes
(1) files: Performing unfiltered search in
"uid=darrain.waters-admin,cn=users,cn=accounts,dc=scinet,dc=ars,dc=usda,dc=gov",
scope "base"
(1) files: Waiting for search result...
(1) files: Processing memberOf value
"cn=admins,cn=groups,cn=accounts,dc=scinet,dc=ars,dc=usda,dc=gov" as a DN
(1) files: Resolving group DN
"cn=admins,cn=groups,cn=accounts,dc=scinet,dc=ars,dc=usda,dc=gov" to group
name
(1) files: Performing unfiltered search in
"cn=admins,cn=groups,cn=accounts,dc=scinet,dc=ars,dc=usda,dc=gov", scope
"base"
(1) files: Waiting for search result...
(1) files: Group DN
"cn=admins,cn=groups,cn=accounts,dc=scinet,dc=ars,dc=usda,dc=gov" resolves
to name "admins"
(1) files: User found in group "admins". Comparison between membership:
name (resolved from DN
"cn=admins,cn=groups,cn=accounts,dc=scinet,dc=ars,dc=usda,dc=gov"), check:
name
rlm_ldap (ldap): Released connection (5)
(1) files: users: Matched entry DEFAULT at line 72
(1) [files] = ok
(1) [expiration] = noop
(1) [logintime] = noop
(1) pap: Converted: &control:Password-With-Header -> &control:SSHA1-Password
(1) pap: Removing &control:Password-With-Header
(1) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28
bytes
(1) pap: WARNING: Auth-Type already set. Not setting to PAP
(1) [pap] = noop
(1) } # authorize = updated
(1) Found Auth-Type = Accept
(1) Auth-Type = Accept, accepting the user
(1) # Executing section post-auth from file /etc/raddb/sites-enabled/default
(1) post-auth {
(1) update {
(1) No attributes updated
(1) } # update = noop
(1) [exec] = noop
(1) policy remove_reply_message_if_eap {
(1) if (&reply:EAP-Message && &reply:Reply-Message) {
(1) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(1) else {
(1) [noop] = noop
(1) } # else = noop
(1) } # policy remove_reply_message_if_eap = noop
(1) } # post-auth = noop
(1) Sent Access-Accept Id 70 from 10.1.0.150:1812 to 10.10.0.10:51639
length 0
(1) Finished request
Waking up in 4.9 seconds.
(1) Cleaning up request packet ID 70 with timestamp +79
More information about the Freeradius-Users
mailing list