Script not working when runned by service in CentOS
Lasse Odden
lasse.odden at gmail.com
Thu May 4 10:40:40 CEST 2017
Hello!
I have som troubles getting my configuration to work when I run it as a
service.
When I run it in manually it is working fine. I've tried to add the radiusd
to root and change file permissions back and forth on my perl-scripts.
Nothing changes.
Here is the config for the service:
[Unit]
Description=FreeRADIUS high performance RADIUS server.
After=syslog.target network.target
[Service]
Type=forking
PIDFile=/var/run/radiusd/radiusd.pid
ExecStartPre=-/bin/chown -R radiusd.radiusd /var/run/radiusd
ExecStartPre=/usr/sbin/radiusd -C
ExecStart=/usr/sbin/radiusd -d /etc/raddb -t -X
ExecReload=/usr/sbin/radiusd -C
ExecReload=/bin/kill -HUP $MAINPID
[Install]
WantedBy=multi-user.target
Here is the output I get from the service with journalctl:
May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: Program returned
code (0) and output 'NT_STATUS_OK: Success (0x0)'
May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1) ntlm_auth :
Program executed successfully
May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1) [ntlm_auth] =
ok
May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1)
perl_attr_check : $RAD_REQUEST{'User-Name'} = &request:User-Name ->
'k00jlod'
May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1)
perl_attr_check : $RAD_REQUEST{'User-Password'} = &request:User-Password ->
'password'
May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1)
perl_attr_check : $RAD_REQUEST{'NAS-IP-Address'} = &request:NAS-IP-Address
-> '172.28.0.18'
May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1)
perl_attr_check : $RAD_REQUEST{'NAS-Port'} = &request:NAS-Port -> '48865280'
May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1)
perl_attr_check : $RAD_REQUEST{'Called-Station-Id'} =
&request:Called-Station-Id -> '82.147.36.212'
May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1)
perl_attr_check : $RAD_REQUEST{'Calling-Station-Id'} =
&request:Calling-Station-Id -> '77.106.182.238'
May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1)
perl_attr_check : $RAD_REQUEST{'NAS-Port-Type'} = &request:NAS-Port-Type ->
'Virtual'
May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1)
perl_attr_check : $RAD_REQUEST{'Tunnel-Client-Endpoint'} =
&request:Tunnel-Client-Endpoint -> '77.106.182.238'
May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1)
perl_attr_check : $RAD_REQUEST{'Event-Timestamp'} =
&request:Event-Timestamp -> 'May 4 2017 10:22:23 CEST'
May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1)
perl_attr_check : $RAD_REQUEST{'Cisco-AVPair'} = &request:Cisco-AVPair ->
'ip:source-ip=77.106.182.238'
May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1)
perl_attr_check : $RAD_REQUEST{'ASA-TunnelGroupName'} =
&request:ASA-TunnelGroupName -> 'Two-factor'
May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1)
perl_attr_check : $RAD_REQUEST{'ASA-ClientType'} = &request:ASA-ClientType
-> 'AnyConnect-Client-SSL-VPN'
May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1)
perl_attr_check : $RAD_CHECK{'Auth-Type'} = &control:Auth-Type ->
'ntlm_auth'
May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1)
perl_attr_check : $RAD_CONFIG{'Auth-Type'} = &control:Auth-Type ->
'ntlm_auth'
May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: rlm_perl:
perl_embed:: module = /etc/raddb/mods-config/perl_attr_check/
attribute_check.pl , func = authenticate exit status= Cannot connect to
LDAP at /etc/raddb/mods-config/perl_attr_check/attribute_check.pl line 137,
<DATA> line 747.
May 04 10:22:23 freeradius1.hedmark.org systemd[1]: radiusd.service:
control process exited, code=killed status=11
May 04 10:22:23 freeradius1.hedmark.org systemd[1]: Failed to start
FreeRADIUS high performance RADIUS server..
May 04 10:22:23 freeradius1.hedmark.org systemd[1]: Unit radiusd.service
entered failed state.
May 04 10:22:23 freeradius1.hedmark.org systemd[1]: radiusd.service failed.
As you can see, it is complaining on the ldap binding in my perl script.
Here is the binding in the perl-script:
......
sub authenticate {
my $ldapresult;
#Define parameters
my $server = '10.0.0.1';
my $port = '12345';
my $binduser = 'cn=user,dc=domain,dc=org';
my $password = "password";
#connect to LDAP and bind as user
my $ldap = Net::LDAP->new("ldaps://$server", port=> $port, timeout
=> 10) or die "Cannot connect to LDAP";
my $mesg = $ldap->bind($binduser , password => $password );
my $result = $ldap->search(
base => "ou=users,dc=domain,dc=org",
filter => "(uid=$RAD_REQUEST{'User-Name'})");
die $result->error if $result->code;
foreach my $entry ($result->entries)
{
$ldapresult = $entry->get_value("userParameters");
}
$ldap->unbind;
if (defined $ldapresult) {
$RAD_CHECK{'Response-Packet-Type'} = "Access-Challenge";
$RAD_REPLY{'Reply-Message'} = "Tast inn din engangskode.";
my $range = 89999;
my $minimum = 10000;
my $random = int(rand($range)) + $minimum;
$RAD_REPLY{'State'} = $random;
return RLM_MODULE_HANDLED;
}
else {
return RLM_MODULE_OK;
}
}
......
And at last, here is the output from when I run it manually:
[root at freeradius1 raddb]# /usr/sbin/radiusd -d /etc/raddb -t -X
radiusd: FreeRADIUS Version 3.0.4, for host x86_64-redhat-linux-gnu, built
on Jan 17 2017 at 18:49:55
Copyright (C) 1999-2014 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/perl
including configuration file /etc/raddb/mods-enabled/cache
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/operator-name
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/control
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
including configuration file /etc/raddb/sites-enabled/icinga
main {
security {
user = "radiusd"
group = "root"
allow_core_dumps = no
}
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client 10.49.0.0/24 {
ipv4addr = 10.49.0.0/24
require_message_authenticator = no
secret = <<< secret >>>
shortname = "private-network-1"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client 10.50.2.213 {
ipv4addr = 10.50.2.213/32
require_message_authenticator = no
secret = <<< secret >>>
shortname = "icinga-host"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client 172.28.0.18 {
ipv4addr = 172.28.0.18/32
require_message_authenticator = no
secret = <<< secret >>>
shortname = "TEST-VPN"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client 172.28.0.30 {
ipv4addr = 172.28.0.30/32
require_message_authenticator = no
secret = <<< secret >>>
shortname = "TEST-VPN"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
radiusd: #### Instantiating modules ####
instantiate {
}
modules {
# Loaded module rlm_always
# Instantiating module "reject" from file /etc/raddb/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Instantiating module "fail" from file /etc/raddb/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Instantiating module "ok" from file /etc/raddb/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Instantiating module "handled" from file /etc/raddb/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Instantiating module "noop" from file /etc/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Instantiating module "updated" from file /etc/raddb/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_attr_filter
# Instantiating module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/raddb/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
# Instantiating module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
# Loaded module rlm_cache
# Instantiating module "cache_eap" from file
/etc/raddb/mods-enabled/cache_eap
cache cache_eap {
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 16384
epoch = 0
add_stats = no
}
# Loaded module rlm_chap
# Instantiating module "chap" from file /etc/raddb/mods-enabled/chap
# Loaded module rlm_detail
# Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
detail {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Instantiating module "auth_log" from file
/etc/raddb/mods-enabled/detail.log
detail auth_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
# Instantiating module "reply_log" from file
/etc/raddb/mods-enabled/detail.log
detail reply_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Instantiating module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
detail pre_proxy_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Instantiating module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
detail post_proxy_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Loaded module rlm_dhcp
# Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp
# Loaded module rlm_digest
# Instantiating module "digest" from file /etc/raddb/mods-enabled/digest
# Loaded module rlm_dynamic_clients
# Instantiating module "dynamic_clients" from file
/etc/raddb/mods-enabled/dynamic_clients
# Loaded module rlm_eap
# Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
eap {
default_eap_type = "peap"
timer_expire = 60
ignore_unknown_eap_types = no
mod_accounting_username_bug = no
max_sessions = 1024
}
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
ca_path = "/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/etc/raddb/certs/wifi.domain.org.key"
certificate_file = "/etc/raddb/certs/wifi.domain.org.crt"
ca_file = "/etc/raddb/certs/wifi.domain.org.ca.crt"
private_key_password = <<< secret >>>
dh_file = "/etc/raddb/certs/dh"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
ecdh_curve = "prime256v1"
cache {
enable = yes
lifetime = 24
max_entries = 255
}
verify {
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = yes
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_method = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Loaded module rlm_exec
# Instantiating module "echo" from file /etc/raddb/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Instantiating module "exec" from file /etc/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_expiration
# Instantiating module "expiration" from file
/etc/raddb/mods-enabled/expiration
# Loaded module rlm_expr
# Instantiating module "expr" from file /etc/raddb/mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
# Loaded module rlm_files
# Instantiating module "files" from file /etc/raddb/mods-enabled/files
files {
filename = "/etc/raddb/mods-config/files/authorize"
usersfile = "/etc/raddb/mods-config/files/authorize"
acctusersfile = "/etc/raddb/mods-config/files/accounting"
preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
compat = "cistron"
}
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:132 Cistron compatibility checks
for entry icinga ...
[/etc/raddb/mods-config/files/authorize]:192 Cistron compatibility checks
for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:199 Cistron compatibility checks
for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:206 Cistron compatibility checks
for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:132 Cistron compatibility checks
for entry icinga ...
[/etc/raddb/mods-config/files/authorize]:192 Cistron compatibility checks
for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:199 Cistron compatibility checks
for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:206 Cistron compatibility checks
for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
# Loaded module rlm_linelog
# Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
linelog {
filename = "/var/log/radius/linelog"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{Packet-Type}:-default}"
}
# Instantiating module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/radius/linelog-accounting"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_logintime
# Instantiating module "logintime" from file
/etc/raddb/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_mschap
# Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
ntlm_auth = "/usr/bin/ntlm_auth --username=%{User-Name}
--password=%{User-Password} --domain=domain.ORG"
passchange {
}
allow_retry = yes
}
# Instantiating module "ntlm_auth" from file
/etc/raddb/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/usr/bin/ntlm_auth --request-nt-key --domain=domain.ORG
--username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_pap
# Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_passwd
# Instantiating module "etc_passwd" from file
/etc/raddb/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Loaded module rlm_preprocess
# Instantiating module "preprocess" from file
/etc/raddb/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
hints = "/etc/raddb/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
# Loaded module rlm_radutmp
# Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_realm
# Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Instantiating module "realmpercent" from file
/etc/raddb/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_replicate
# Instantiating module "replicate" from file
/etc/raddb/mods-enabled/replicate
# Loaded module rlm_soh
# Instantiating module "soh" from file /etc/raddb/mods-enabled/soh
soh {
dhcp = yes
}
# Instantiating module "sradutmp" from file
/etc/raddb/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/radius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_unix
# Instantiating module "unix" from file /etc/raddb/mods-enabled/unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
# Loaded module rlm_utf8
# Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8
# Loaded module rlm_unpack
# Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack
# Loaded module rlm_perl
# Instantiating module "perl_auth" from file /etc/raddb/mods-enabled/perl
perl perl_auth {
filename = "/etc/raddb/mods-config/perl_auth/auth.pl"
func_authorize = "authorize"
func_authenticate = "authenticate"
func_post_auth = "post_auth"
func_accounting = "accounting"
func_preacct = "preacct"
func_checksimul = "checksimul"
func_detach = "detach"
func_xlat = "xlat"
func_pre_proxy = "pre_proxy"
func_post_proxy = "post_proxy"
func_recv_coa = "recv_coa"
func_send_coa = "send_coa"
}
# Instantiating module "perl_attr_check" from file
/etc/raddb/mods-enabled/perl
perl perl_attr_check {
filename = "/etc/raddb/mods-config/perl_attr_check/
attribute_check.pl"
func_authorize = "authorize"
func_authenticate = "authenticate"
func_post_auth = "post_auth"
func_accounting = "accounting"
func_preacct = "preacct"
func_checksimul = "checksimul"
func_detach = "detach"
func_xlat = "xlat"
func_pre_proxy = "pre_proxy"
func_post_proxy = "post_proxy"
func_recv_coa = "recv_coa"
func_send_coa = "send_coa"
}
# Instantiating module "cache" from file /etc/raddb/mods-enabled/cache
cache {
key = "%{User-Name}"
ttl = 180
max_entries = 16384
epoch = 0
add_stats = no
}
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
# Creating Auth-Type = icinga_check
# Creating Auth-Type = ntlm_auth
# Creating Auth-Type = perl_auth
# Creating Auth-Type = digest
# Creating Autz-Type = icinga_check
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "ldap" (see raddb/mods-available/README.rst)
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server inner-tunnel
server icinga { # from file /etc/raddb/sites-enabled/icinga
# Loading authenticate {...}
# Loading authorize {...}
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server icinga
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 18012
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 18013
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
listen {
type = "auth"
ipaddr = *
port = 1812
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 1813
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Listening on auth address * port 18012 as server default
Listening on acct address * port 18013 as server default
Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel
Listening on auth address * port 1812 as server icinga
Listening on acct address * port 1813 as server icinga
Opening new proxy socket 'proxy address * port 0'
Listening on proxy address * port 40136
Ready to process requests
Received Access-Request Id 182 from 172.28.0.18:63103 to 10.58.0.15:18012
length 177
User-Name = 'k00jlod'
User-Password = 'password'
NAS-Port = 48881664
Called-Station-Id = '82.147.36.212'
Calling-Station-Id = '77.106.182.238'
NAS-Port-Type = Virtual
Tunnel-Client-Endpoint:0 = '77.106.182.238'
NAS-IP-Address = 172.28.0.18
Cisco-AVPair = 'ip:source-ip=77.106.182.238'
ASA-TunnelGroupName = 'Two-factor'
ASA-ClientType = AnyConnect-Client-SSL-VPN
(0) Received Access-Request packet from host 172.28.0.18 port 63103,
id=182, length=177
(0) User-Name = 'k00jlod'
(0) User-Password = 'password'
(0) NAS-Port = 48881664
(0) Called-Station-Id = '82.147.36.212'
(0) Calling-Station-Id = '77.106.182.238'
(0) NAS-Port-Type = Virtual
(0) Tunnel-Client-Endpoint:0 = '77.106.182.238'
(0) NAS-IP-Address = 172.28.0.18
(0) Cisco-AVPair = 'ip:source-ip=77.106.182.238'
(0) ASA-TunnelGroupName = 'Two-factor'
(0) ASA-ClientType = AnyConnect-Client-SSL-VPN
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0) authorize {
(0) filter_username filter_username {
(0) if (!&User-Name)
(0) if (!&User-Name) -> FALSE
(0) if (&User-Name =~ / /)
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@.*@/ )
(0) if (&User-Name =~ /@.*@/ ) -> FALSE
(0) if (&User-Name =~ /\\.\\./ )
(0) if (&User-Name =~ /\\.\\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) ->
FALSE
(0) if (&User-Name =~ /\\.$/)
(0) if (&User-Name =~ /\\.$/) -> FALSE
(0) if (&User-Name =~ /@\\./)
(0) if (&User-Name =~ /@\\./) -> FALSE
(0) } # filter_username filter_username = notfound
(0) [preprocess] = ok
(0) if (User-Name == "icinga")
(0) if (User-Name == "icinga") -> FALSE
(0) elsif (State)
(0) elsif (State) -> FALSE
(0) else else {
(0) update control {
(0) &Auth-Type := ntlm_auth
(0) } # update control = noop
(0) } # else else = noop
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix : Checking for suffix after "@"
(0) suffix : No '@' in User-Name = "k00jlod", looking up realm NULL
(0) suffix : No such realm "NULL"
(0) [suffix] = noop
(0) eap : No EAP-Message, not doing EAP
(0) [eap] = noop
(0) [expiration] = noop
(0) [logintime] = noop
(0) WARNING: pap : No "known good" password found for the user. Not
setting Auth-Type
(0) WARNING: pap : Authentication will fail unless a "known good" password
is available
(0) [pap] = noop
(0) } # authorize = ok
(0) Found Auth-Type = ntlm_auth
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0) Auth-Type ntlm_auth {
Executing: /usr/bin/ntlm_auth --request-nt-key --domain=domain.ORG
--username=%{mschap:User-Name} --password=%{User-Password}:
(0) ntlm_auth : EXPAND --username=%{mschap:User-Name}
(0) ntlm_auth : --> --username=k00jlod
(0) ntlm_auth : EXPAND --password=%{User-Password}
(0) ntlm_auth : --> --password=password
Program returned code (0) and output 'NT_STATUS_OK: Success (0x0)'
(0) ntlm_auth : Program executed successfully
(0) [ntlm_auth] = ok
(0) perl_attr_check : $RAD_REQUEST{'User-Name'} = &request:User-Name ->
'k00jlod'
(0) perl_attr_check : $RAD_REQUEST{'User-Password'} =
&request:User-Password -> 'password'
(0) perl_attr_check : $RAD_REQUEST{'NAS-IP-Address'} =
&request:NAS-IP-Address -> '172.28.0.18'
(0) perl_attr_check : $RAD_REQUEST{'NAS-Port'} = &request:NAS-Port ->
'48881664'
(0) perl_attr_check : $RAD_REQUEST{'Called-Station-Id'} =
&request:Called-Station-Id -> '82.147.36.212'
(0) perl_attr_check : $RAD_REQUEST{'Calling-Station-Id'} =
&request:Calling-Station-Id -> '77.106.182.238'
(0) perl_attr_check : $RAD_REQUEST{'NAS-Port-Type'} =
&request:NAS-Port-Type -> 'Virtual'
(0) perl_attr_check : $RAD_REQUEST{'Tunnel-Client-Endpoint'} =
&request:Tunnel-Client-Endpoint -> '77.106.182.238'
(0) perl_attr_check : $RAD_REQUEST{'Event-Timestamp'} =
&request:Event-Timestamp -> 'May 4 2017 10:33:32 CEST'
(0) perl_attr_check : $RAD_REQUEST{'Cisco-AVPair'} =
&request:Cisco-AVPair -> 'ip:source-ip=77.106.182.238'
(0) perl_attr_check : $RAD_REQUEST{'ASA-TunnelGroupName'} =
&request:ASA-TunnelGroupName -> 'Two-factor'
(0) perl_attr_check : $RAD_REQUEST{'ASA-ClientType'} =
&request:ASA-ClientType -> 'AnyConnect-Client-SSL-VPN'
(0) perl_attr_check : $RAD_CHECK{'Auth-Type'} = &control:Auth-Type ->
'ntlm_auth'
(0) perl_attr_check : $RAD_CONFIG{'Auth-Type'} = &control:Auth-Type ->
'ntlm_auth'
(0) perl_attr_check : &request:NAS-Port-Type =
$RAD_REQUEST{'NAS-Port-Type'} -> 'Virtual'
(0) perl_attr_check : &request:ASA-ClientType =
$RAD_REQUEST{'ASA-ClientType'} -> 'AnyConnect-Client-SSL-VPN'
(0) perl_attr_check : &request:ASA-TunnelGroupName =
$RAD_REQUEST{'ASA-TunnelGroupName'} -> 'Two-factor'
(0) perl_attr_check : &request:Calling-Station-Id =
$RAD_REQUEST{'Calling-Station-Id'} -> '77.106.182.238'
(0) perl_attr_check : &request:Called-Station-Id =
$RAD_REQUEST{'Called-Station-Id'} -> '82.147.36.212'
(0) perl_attr_check : &request:Cisco-AVPair = $RAD_REQUEST{'Cisco-AVPair'}
-> 'ip:source-ip=77.106.182.238'
(0) perl_attr_check : &request:User-Name = $RAD_REQUEST{'User-Name'} ->
'k00jlod'
(0) perl_attr_check : &request:Event-Timestamp =
$RAD_REQUEST{'Event-Timestamp'} -> 'May 4 2017 10:33:32 CEST'
(0) perl_attr_check : &request:User-Password =
$RAD_REQUEST{'User-Password'} -> 'password'
(0) perl_attr_check : &request:Tunnel-Client-Endpoint:0 =
$RAD_REQUEST{'Tunnel-Client-Endpoint:0'} -> '77.106.182.238'
(0) perl_attr_check : &request:NAS-IP-Address =
$RAD_REQUEST{'NAS-IP-Address'} -> '172.28.0.18'
(0) perl_attr_check : &request:NAS-Port = $RAD_REQUEST{'NAS-Port'} ->
'48881664'
(0) perl_attr_check : &reply:Reply-Message = $RAD_REPLY{'Reply-Message'}
-> 'Tast inn din engangskode.'
(0) perl_attr_check : &reply:State = $RAD_REPLY{'State'} -> '70438'
(0) perl_attr_check : &control:Response-Packet-Type =
$RAD_CHECK{'Response-Packet-Type'} -> 'Access-Challenge'
(0) perl_attr_check : &control:Auth-Type = $RAD_CHECK{'Auth-Type'} ->
'ntlm_auth'
(0) [perl_attr_check] = handled
(0) } # Auth-Type ntlm_auth = handled
(0) Sending Access-Challenge packet to host 172.28.0.18 port 63103, id=182,
length=0
(0) Reply-Message = 'Tast inn din engangskode.'
(0) State = 0x3730343338
Sending Access-Challenge Id 182 from 10.58.0.15:18012 to 172.28.0.18:63103
Reply-Message = 'Tast inn din engangskode.'
State = 0x3730343338
(0) Finished request
Waking up in 4.9 seconds.
(0) Cleaning up request packet ID 182 with timestamp +6
Ready to process requests
Sorry for the long post, but I know how important the debug is to help.
Best regards,
Lasse Odden
More information about the Freeradius-Users
mailing list