Loop in sites-enabled/default
Alan Buxey
alan.buxey at gmail.com
Thu May 4 13:39:11 CEST 2017
radtest is just basic auth - so only hits the default server - you
wireless client is EAP - so sets up a TLS tunnel and goes into
inner-tunnel. your inner-tunnel doesnt have the things configured to
handle the request.... basically, the auth is PEAP with MSCHAPv2 - so
challenge-response based, no clear password is sent in that
communication.
whats the LDAP? if AD you cannot use that method...and it'll be
ntlm_auth or winbind needed. if other LDAP then you can populate the
password field in the LDAP with eg NT hash...
alan
On 4 May 2017 at 00:51, Carlo Musante <carlo at wayne.edu> wrote:
> Hello,
>
> Working on a new server and trying to get wireless authentication working with LDAP. Radtest works from the server using PAP, so the LDAP lookup is working. When the authethentication request comes from the wireless client, it does not look like the password is being checked against LDAP. Authentication gets rejected here. Struggling to find the problem.
>
> eap : Freeing handler
> [eap] = reject
> } # authenticate = reject
> Failed to authenticate the user
> Using Post-Auth-Type Reject
> # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
> Post-Auth-Type REJECT {
> attr_filter.access_reject : EXPAND %{User-Name}
> attr_filter.access_reject : --> zz9930
> attr_filter.access_reject : Matched entry DEFAULT at line 11
> [attr_filter.access_reject] = updated
> } # Post-Auth-Type REJECT = updated
>
> Any help would be very much appreciated.
>
> Radiusd -X startup output and subsequent log included below.
>
> Carlo
>
>
> radtest zz9930 -t pap ******** localhost 10 testing123
> Sending Access-Request Id 209 from 0.0.0.0:46670 to 127.0.0.1:1812
> User-Name = 'zz9930'
> User-Password = '********'
> NAS-IP-Address = 141.217.0.164
> NAS-Port = 10
> Message-Authenticator = 0x00
> Received Access-Accept Id 209 from 127.0.0.1:1812 to 127.0.0.1:46670 length 20
>
> Received Access-Request Id 209 from 127.0.0.1:46670 to 127.0.0.1:1812 length 76
> User-Name = 'zz9930'
> User-Password = '********'
> NAS-IP-Address = 141.217.0.164
> NAS-Port = 10
> Message-Authenticator = 0x288132b2444fb169ac902f52169603f6
> (0) Received Access-Request packet from host 127.0.0.1 port 46670, id=209, length=76
> (0) User-Name = 'zz9930'
> (0) User-Password = '********'
> (0) NAS-IP-Address = 141.217.0.164
> (0) NAS-Port = 10
> (0) Message-Authenticator = 0x288132b2444fb169ac902f52169603f6
> (0) # Executing section authorize from file /etc/raddb/sites-enabled/default
> (0) authorize {
> (0) filter_username filter_username {
> (0) if (!&User-Name)
> (0) if (!&User-Name) -> FALSE
> (0) if (&User-Name =~ / /)
> (0) if (&User-Name =~ / /) -> FALSE
> (0) if (&User-Name =~ /@.*@/ )
> (0) if (&User-Name =~ /@.*@/ ) -> FALSE
> (0) if (&User-Name =~ /\\.\\./ )
> (0) if (&User-Name =~ /\\.\\./ ) -> FALSE
> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
> (0) if (&User-Name =~ /\\.$/)
> (0) if (&User-Name =~ /\\.$/) -> FALSE
> (0) if (&User-Name =~ /@\\./)
> (0) if (&User-Name =~ /@\\./) -> FALSE
> (0) } # filter_username filter_username = notfound
> (0) [preprocess] = ok
> (0) operator-name.authorize operator-name.authorize {
> (0) if ("%{client:Operator-Name}")
> (0) Client does not contain config item "Operator-Name"
> (0) EXPAND %{client:Operator-Name}
> (0) -->
> (0) if ("%{client:Operator-Name}") -> FALSE
> (0) } # operator-name.authorize operator-name.authorize = ok
> (0) [chap] = noop
> (0) [mschap] = noop
> (0) suffix : Checking for suffix after "@"
> (0) suffix : No '@' in User-Name = "zz9930", looking up realm NULL
> (0) suffix : No such realm "NULL"
> (0) [suffix] = noop
> (0) eap : No EAP-Message, not doing EAP
> (0) [eap] = noop
> rlm_ldap (ldap): Reserved connection (4)
> (0) ldap : EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
> (0) ldap : --> (uid=zz9930)
> (0) ldap : EXPAND dc=wayne,dc=edu
> (0) ldap : --> dc=wayne,dc=edu
> (0) ldap : Performing search in 'dc=wayne,dc=edu' with filter '(uid=zz9930)', scope 'sub'
> (0) ldap : Waiting for search result...
> (0) ldap : User object found at DN "uid=zz9930,ou=People,dc=wayne,dc=edu"
> (0) ldap : Processing user attributes
> (0) ldap : control:Password-With-Header += '{SSHA}US4ZGbcPi1X61YzS9qQX1cmjDLXdV1I8yiqWbw=='
> rlm_ldap (ldap): Released connection (4)
> (0) [ldap] = ok
> (0) [expiration] = noop
> (0) [logintime] = noop
> (0) [pap] = updated
> (0) } # authorize = updated
> (0) Found Auth-Type = PAP
> (0) # Executing group from file /etc/raddb/sites-enabled/default
> (0) Auth-Type PAP {
> (0) pap : Login attempt with password
> (0) pap : Comparing with "known-good" SSHA-Password
> (0) pap : Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28 bytes
> (0) pap : User authenticated successfully
> (0) [pap] = ok
> (0) } # Auth-Type PAP = ok
> (0) # Executing section post-auth from file /etc/raddb/sites-enabled/default
> (0) post-auth {
> (0) [exec] = noop
> (0) remove_reply_message_if_eap remove_reply_message_if_eap {
> (0) if (&reply:EAP-Message && &reply:Reply-Message)
> (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
> (0) else else {
> (0) [noop] = noop
> (0) } # else else = noop
> (0) } # remove_reply_message_if_eap remove_reply_message_if_eap = noop
> (0) } # post-auth = noop
> (0) Sending Access-Accept packet to host 127.0.0.1 port 46670, id=209, length=0
> Sending Access-Accept Id 209 from 127.0.0.1:1812 to 127.0.0.1:46670
> (0) Finished request
> Waking up in 0.3 seconds.
> Waking up in 4.6 seconds.
> (0) Cleaning up request packet ID 209 with timestamp +9
> Ready to process requests
>
> Running on RHEL 7.
>
> radiusd: FreeRADIUS Version 3.0.4, for host x86_64-redhat-linux-gnu, built on Jan 17 2017 at 10:28:38
> Copyright (C) 1999-2014 The FreeRADIUS server project and contributors
>
> radius3 raddb]$ grep -v \# sites-available/default | grep -v ^$
> server default {
> listen {
> type = auth
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> ipaddr = *
> port = 0
> type = acct
> limit {
> }
> }
> listen {
> type = auth
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> ipv6addr = ::
> port = 0
> type = acct
> limit {
> }
> }
> authorize {
> filter_username
> preprocess
> operator-name
> chap
> mschap
> suffix
> eap {
> ok = return
> }
> -sql
> ldap
> expiration
> logintime
> pap
> }
> authenticate {
> Auth-Type PAP {
> pap
> }
> eap
> }
> preacct {
> preprocess
> acct_unique
> suffix
> files
> }
> accounting {
> detail
> -sql
> exec
> attr_filter.accounting_response
> }
> session {
> }
> post-auth {
> -sql
> exec
> remove_reply_message_if_eap
> Post-Auth-Type REJECT {
> -sql
> attr_filter.access_reject
> eap
> remove_reply_message_if_eap
> }
> }
> pre-proxy {
> }
> post-proxy {
> eap
> }
> }
>
> sudo radiusd -X
> radiusd: FreeRADIUS Version 3.0.4, for host x86_64-redhat-linux-gnu, built on Jan 17 2017 at 10:28:38
> Copyright (C) 1999-2014 The FreeRADIUS server project and contributors
> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE
> You may redistribute copies of FreeRADIUS under the terms of the
> GNU General Public License
> For more information about these matters, see the file named COPYRIGHT
> Starting - reading configuration files ...
> including dictionary file /usr/share/freeradius/dictionary
> including dictionary file /usr/share/freeradius/dictionary.dhcp
> including dictionary file /usr/share/freeradius/dictionary.vqp
> including dictionary file /etc/raddb/dictionary
> including configuration file /etc/raddb/radiusd.conf
> including configuration file /etc/raddb/proxy.conf
> including configuration file /etc/raddb/clients.conf
> including files in directory /etc/raddb/mods-enabled/
> including configuration file /etc/raddb/mods-enabled/always
> including configuration file /etc/raddb/mods-enabled/attr_filter
> including configuration file /etc/raddb/mods-enabled/cache_eap
> including configuration file /etc/raddb/mods-enabled/chap
> including configuration file /etc/raddb/mods-enabled/detail
> including configuration file /etc/raddb/mods-enabled/detail.log
> including configuration file /etc/raddb/mods-enabled/dhcp
> including configuration file /etc/raddb/mods-enabled/digest
> including configuration file /etc/raddb/mods-enabled/dynamic_clients
> including configuration file /etc/raddb/mods-enabled/eap
> including configuration file /etc/raddb/mods-enabled/echo
> including configuration file /etc/raddb/mods-enabled/exec
> including configuration file /etc/raddb/mods-enabled/expiration
> including configuration file /etc/raddb/mods-enabled/expr
> including configuration file /etc/raddb/mods-enabled/files
> including configuration file /etc/raddb/mods-enabled/linelog
> including configuration file /etc/raddb/mods-enabled/logintime
> including configuration file /etc/raddb/mods-enabled/mschap
> including configuration file /etc/raddb/mods-enabled/ntlm_auth
> including configuration file /etc/raddb/mods-enabled/pap
> including configuration file /etc/raddb/mods-enabled/passwd
> including configuration file /etc/raddb/mods-enabled/preprocess
> including configuration file /etc/raddb/mods-enabled/radutmp
> including configuration file /etc/raddb/mods-enabled/realm
> including configuration file /etc/raddb/mods-enabled/replicate
> including configuration file /etc/raddb/mods-enabled/soh
> including configuration file /etc/raddb/mods-enabled/sradutmp
> including configuration file /etc/raddb/mods-enabled/unix
> including configuration file /etc/raddb/mods-enabled/unpack
> including configuration file /etc/raddb/mods-enabled/utf8
> including configuration file /etc/raddb/mods-enabled/ldap
> including files in directory /etc/raddb/policy.d/
> including configuration file /etc/raddb/policy.d/accounting
> including configuration file /etc/raddb/policy.d/canonicalization
> including configuration file /etc/raddb/policy.d/control
> including configuration file /etc/raddb/policy.d/cui
> including configuration file /etc/raddb/policy.d/debug
> including configuration file /etc/raddb/policy.d/dhcp
> including configuration file /etc/raddb/policy.d/eap
> including configuration file /etc/raddb/policy.d/operator-name
> including configuration file /etc/raddb/policy.d/filter
> including files in directory /etc/raddb/sites-enabled/
> including configuration file /etc/raddb/sites-enabled/default
> including configuration file /etc/raddb/sites-enabled/inner-tunnel
> including configuration file /etc/raddb/sites-enabled/eduroam
> main {
> security {
> user = "radiusd"
> group = "radiusd"
> allow_core_dumps = no
> }
> }
> main {
> name = "freeradius3"
> prefix = "/usr"
> localstatedir = "/var"
> sbindir = "/usr/sbin"
> logdir = "/var/log/radius"
> run_dir = "/var/run/freeradius3"
> libdir = "/usr/lib"
> radacctdir = "/var/log/radius/radacct"
> hostname_lookups = no
> max_request_time = 30
> cleanup_delay = 5
> max_requests = 16384
> pidfile = "/var/run/freeradius3/freeradius3.pid"
> checkrad = "/usr/sbin/checkrad"
> debug_level = 0
> proxy_requests = yes
> log {
> stripped_names = no
> auth = no
> auth_badpass = no
> auth_goodpass = no
> colourise = yes
> msg_denied = "You are already logged in - access denied"
> }
> security {
> max_attributes = 200
> reject_delay = 1
> status_server = yes
> }
> }
> radiusd: #### Loading Realms and Home Servers ####
> proxy server {
> retry_delay = 5
> retry_count = 3
> default_fallback = no
> dead_time = 120
> wake_all_if_all_dead = no
> }
> home_server localhost {
> ipaddr = 127.0.0.1
> port = 1812
> type = "auth"
> secret = <<< secret >>>
> response_window = 20.000000
> response_timeouts = 1
> max_outstanding = 65536
> zombie_period = 40
> status_check = "status-server"
> ping_interval = 30
> check_interval = 30
> check_timeout = 4
> num_answers_to_alive = 3
> revive_interval = 120
> coa {
> irt = 2
> mrt = 16
> mrc = 5
> mrd = 30
> }
> limit {
> max_connections = 16
> max_requests = 0
> lifetime = 0
> idle_timeout = 0
> }
> }
> home_server tlrs1.eduroam.us {
> ipaddr = 64.57.22.74
> port = 1812
> type = "auth+acct"
> secret = <<< secret >>>
> response_window = 20.000000
> response_timeouts = 1
> max_outstanding = 65536
> zombie_period = 60
> status_check = "status-server"
> ping_interval = 30
> check_interval = 30
> check_timeout = 4
> num_answers_to_alive = 3
> revive_interval = 300
> coa {
> irt = 2
> mrt = 16
> mrc = 5
> mrd = 30
> }
> limit {
> max_connections = 16
> max_requests = 0
> lifetime = 0
> idle_timeout = 0
> }
> }
> home_server tlrs2.eduroam.us {
> ipaddr = 64.57.22.78
> port = 1812
> type = "auth+acct"
> secret = <<< secret >>>
> response_window = 20.000000
> response_timeouts = 1
> max_outstanding = 65536
> zombie_period = 60
> status_check = "status-server"
> ping_interval = 30
> check_interval = 30
> check_timeout = 4
> num_answers_to_alive = 3
> revive_interval = 300
> coa {
> irt = 2
> mrt = 16
> mrc = 5
> mrd = 30
> }
> limit {
> max_connections = 16
> max_requests = 0
> lifetime = 0
> idle_timeout = 0
> }
> }
> home_server_pool my_auth_failover {
> type = fail-over
> home_server = localhost
> }
> realm wayne.edu {
> auth_pool = my_auth_failover
> Ignoring old-style configuration entry "authhost" in realm "wayne.edu"
> }
> realm LOCAL {
> }
> realm med.wayne.edu {
> authhost = rsa.med.wayne.edu:1738
> secret = AhnEAF6XgjkS28
> }
> realm EDUROAM {
> }
> home_server_pool EDUROAM_POOL {
> type = fail-over
> home_server = tlrs1.eduroam.us
> home_server = tlrs2.eduroam.us
> }
> radiusd: #### Loading Clients ####
> client localhost {
> ipaddr = 127.0.0.1
> require_message_authenticator = no
> secret = <<< secret >>>
> nas_type = "other"
> proto = "*"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> client 141.217.4.0/24 {
> ipaddr = 141.217.4.0/24
> require_message_authenticator = no
> secret = <<< secret >>>
> shortname = "wayne-313"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> client 141.217.152.122 {
> ipaddr = 141.217.152.122
> require_message_authenticator = no
> secret = <<< secret >>>
> shortname = "wlan9.infra-w"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> client 64.57.22.74 {
> ipaddr = 64.57.22.74
> netmask = 32
> require_message_authenticator = no
> secret = <<< secret >>>
> shortname = "tlrs1.eduroam.us"
> virtual_server = "eduroam"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> 'netmask' field found in client 64.57.22.74 is deprecated, use CIDR notation instead. Please fix your configuration
> Support for 'netmask' will be removed in a future release
> client 64.57.22.78 {
> ipaddr = 64.57.22.78
> netmask = 32
> require_message_authenticator = no
> secret = <<< secret >>>
> shortname = "tlrs2.eduroam.us"
> virtual_server = "eduroam"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> 'netmask' field found in client 64.57.22.78 is deprecated, use CIDR notation instead. Please fix your configuration
> Support for 'netmask' will be removed in a future release
> radiusd: #### Instantiating modules ####
> instantiate {
> }
> modules {
> # Loaded module rlm_always
> # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
> always reject {
> rcode = "reject"
> simulcount = 0
> mpp = no
> }
> # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
> always fail {
> rcode = "fail"
> simulcount = 0
> mpp = no
> }
> # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
> always ok {
> rcode = "ok"
> simulcount = 0
> mpp = no
> }
> # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
> always handled {
> rcode = "handled"
> simulcount = 0
> mpp = no
> }
> # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
> always invalid {
> rcode = "invalid"
> simulcount = 0
> mpp = no
> }
> # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
> always userlock {
> rcode = "userlock"
> simulcount = 0
> mpp = no
> }
> # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
> always notfound {
> rcode = "notfound"
> simulcount = 0
> mpp = no
> }
> # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
> always noop {
> rcode = "noop"
> simulcount = 0
> mpp = no
> }
> # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
> always updated {
> rcode = "updated"
> simulcount = 0
> mpp = no
> }
> # Loaded module rlm_attr_filter
> # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.post-proxy {
> filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
> # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.pre-proxy {
> filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
> # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.access_reject {
> filename = "/etc/raddb/mods-config/attr_filter/access_reject"
> key = "%{User-Name}"
> relaxed = no
> }
> reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
> # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.access_challenge {
> filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
> key = "%{User-Name}"
> relaxed = no
> }
> reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
> # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.accounting_response {
> filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
> key = "%{User-Name}"
> relaxed = no
> }
> reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
> # Loaded module rlm_cache
> # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
> cache cache_eap {
> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
> ttl = 15
> max_entries = 16384
> epoch = 0
> add_stats = no
> }
> # Loaded module rlm_chap
> # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap
> # Loaded module rlm_detail
> # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
> detail {
> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> log_packet_header = no
> }
> # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log
> detail auth_log {
> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> log_packet_header = no
> }
> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
> # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log
> detail reply_log {
> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> log_packet_header = no
> }
> # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
> detail pre_proxy_log {
> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> log_packet_header = no
> }
> # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
> detail post_proxy_log {
> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> log_packet_header = no
> }
> # Loaded module rlm_dhcp
> # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp
> # Loaded module rlm_digest
> # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest
> # Loaded module rlm_dynamic_clients
> # Instantiating module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients
> # Loaded module rlm_eap
> # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
> eap {
> default_eap_type = "peap"
> timer_expire = 60
> ignore_unknown_eap_types = no
> mod_accounting_username_bug = no
> max_sessions = 16384
> }
> # Linked to sub-module rlm_eap_md5
> # Linked to sub-module rlm_eap_leap
> # Linked to sub-module rlm_eap_gtc
> gtc {
> challenge = "Password: "
> auth_type = "PAP"
> }
> # Linked to sub-module rlm_eap_tls
> tls {
> tls = "tls-common"
> }
> tls-config tls-common {
> rsa_key_exchange = no
> dh_key_exchange = yes
> rsa_key_length = 512
> dh_key_length = 512
> verify_depth = 0
> ca_path = "/etc/raddb/certs"
> pem_file_type = yes
> private_key_file = "/etc/raddb/certs/server.pem"
> certificate_file = "/etc/raddb/certs/server.pem"
> ca_file = "/etc/raddb/certs/ca.pem"
> private_key_password = <<< secret >>>
> dh_file = "/etc/raddb/certs/dh"
> fragment_size = 1024
> include_length = yes
> check_crl = no
> cipher_list = "DEFAULT"
> ecdh_curve = "prime256v1"
> cache {
> enable = yes
> lifetime = 24
> max_entries = 255
> }
> verify {
> }
> ocsp {
> enable = no
> override_cert_url = yes
> url = "http://127.0.0.1/ocsp/"
> use_nonce = yes
> timeout = 0
> softfail = yes
> }
> }
> # Linked to sub-module rlm_eap_ttls
> ttls {
> tls = "tls-common"
> default_eap_type = "mschapv2"
> copy_request_to_tunnel = yes
> use_tunneled_reply = no
> virtual_server = "inner-tunnel"
> include_length = yes
> require_client_cert = no
> }
> Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_peap
> peap {
> tls = "tls-common"
> default_method = "mschapv2"
> copy_request_to_tunnel = yes
> use_tunneled_reply = yes
> proxy_tunneled_request_as_eap = yes
> virtual_server = "inner-tunnel"
> soh = no
> require_client_cert = no
> }
> Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_mschapv2
> mschapv2 {
> with_ntdomain_hack = no
> send_error = no
> }
> # Loaded module rlm_exec
> # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo
> exec echo {
> wait = yes
> program = "/bin/echo %{User-Name}"
> input_pairs = "request"
> output_pairs = "reply"
> shell_escape = yes
> }
> # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec
> exec {
> wait = no
> input_pairs = "request"
> shell_escape = yes
> timeout = 10
> }
> # Loaded module rlm_expiration
> # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration
> # Loaded module rlm_expr
> # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr
> expr {
> safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
> }
> # Loaded module rlm_files
> # Instantiating module "files" from file /etc/raddb/mods-enabled/files
> files {
> filename = "/etc/raddb/mods-config/files/authorize"
> usersfile = "/etc/raddb/mods-config/files/authorize"
> acctusersfile = "/etc/raddb/mods-config/files/accounting"
> preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
> compat = "cistron"
> }
> reading pairlist file /etc/raddb/mods-config/files/authorize
> [/etc/raddb/mods-config/files/authorize]:87 Cistron compatibility checks for entry bob ...
> [/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ...
> [/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ...
> [/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ...
> reading pairlist file /etc/raddb/mods-config/files/authorize
> [/etc/raddb/mods-config/files/authorize]:87 Cistron compatibility checks for entry bob ...
> [/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ...
> [/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ...
> [/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ...
> reading pairlist file /etc/raddb/mods-config/files/accounting
> reading pairlist file /etc/raddb/mods-config/files/pre-proxy
> # Loaded module rlm_linelog
> # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
> linelog {
> filename = "/var/log/radius/linelog"
> permissions = 384
> format = "This is a log message for %{User-Name}"
> reference = "messages.%{%{Packet-Type}:-default}"
> }
> # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog
> linelog log_accounting {
> filename = "/var/log/radius/linelog-accounting"
> permissions = 384
> format = ""
> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
> }
> # Loaded module rlm_logintime
> # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime
> logintime {
> minimum_timeout = 60
> }
> # Loaded module rlm_mschap
> # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
> mschap {
> use_mppe = yes
> require_encryption = no
> require_strong = no
> with_ntdomain_hack = yes
> passchange {
> }
> allow_retry = yes
> }
> # Instantiating module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
> exec ntlm_auth {
> wait = yes
> program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
> shell_escape = yes
> }
> # Loaded module rlm_pap
> # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
> pap {
> normalise = yes
> }
> # Loaded module rlm_passwd
> # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
> passwd etc_passwd {
> filename = "/etc/passwd"
> format = "*User-Name:Crypt-Password:"
> delimiter = ":"
> ignore_nislike = no
> ignore_empty = yes
> allow_multiple_keys = no
> hash_size = 100
> }
> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> # Loaded module rlm_preprocess
> # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess
> preprocess {
> huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
> hints = "/etc/raddb/mods-config/preprocess/hints"
> with_ascend_hack = no
> ascend_channels_per_line = 23
> with_ntdomain_hack = no
> with_specialix_jetstream_hack = no
> with_cisco_vsa_hack = no
> with_alvarion_vsa_hack = no
> }
> reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
> reading pairlist file /etc/raddb/mods-config/preprocess/hints
> # Loaded module rlm_radutmp
> # Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp
> radutmp {
> filename = "/var/log/radius/radutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 384
> caller_id = yes
> }
> # Loaded module rlm_realm
> # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
> realm IPASS {
> format = "prefix"
> delimiter = "/"
> ignore_default = no
> ignore_null = no
> }
> # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
> realm suffix {
> format = "suffix"
> delimiter = "@"
> ignore_default = no
> ignore_null = no
> }
> # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm
> realm realmpercent {
> format = "suffix"
> delimiter = "%"
> ignore_default = no
> ignore_null = no
> }
> # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
> realm ntdomain {
> format = "prefix"
> delimiter = "\"
> ignore_default = no
> ignore_null = no
> }
> # Loaded module rlm_replicate
> # Instantiating module "replicate" from file /etc/raddb/mods-enabled/replicate
> # Loaded module rlm_soh
> # Instantiating module "soh" from file /etc/raddb/mods-enabled/soh
> soh {
> dhcp = yes
> }
> # Instantiating module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
> radutmp sradutmp {
> filename = "/var/log/radius/sradutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 420
> caller_id = no
> }
> # Loaded module rlm_unix
> # Instantiating module "unix" from file /etc/raddb/mods-enabled/unix
> unix {
> radwtmp = "/var/log/radius/radwtmp"
> }
> # Loaded module rlm_unpack
> # Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack
> # Loaded module rlm_utf8
> # Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8
> # Loaded module rlm_ldap
> # Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap
> ldap {
> server = "ldap.wayne.edu"
> port = 389
> password = <<< secret >>>
> identity = "cn=Script Manager,ou=System Groups,ou=Groups,dc=wayne,dc=edu"
> user {
> filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})"
> scope = "sub"
> base_dn = "dc=wayne,dc=edu"
> access_positive = yes
> }
> group {
> filter = "(objectClass=posixGroup)"
> scope = "sub"
> base_dn = "dc=wayne,dc=edu"
> name_attribute = "cn"
> membership_attribute = "memberOf"
> cacheable_name = no
> cacheable_dn = no
> }
> client {
> filter = "(objectClass=frClient)"
> scope = "sub"
> base_dn = "dc=wayne,dc=edu"
> attribute {
> identifier = "radiusClientIdentifier"
> shortname = "cn"
> secret = "radiusClientSecret"
> }
> }
> profile {
> filter = "(&)"
> }
> options {
> ldap_debug = 40
> chase_referrals = yes
> rebind = yes
> net_timeout = 1
> res_timeout = 20
> srv_timelimit = 20
> idle = 60
> probes = 3
> interval = 3
> }
> tls {
> start_tls = no
> }
> }
> rlm_ldap: Falling back to build time libldap version info. Query for LDAP_OPT_API_INFO returned: -1
> rlm_ldap: libldap vendor: OpenLDAP version: 20440
> accounting {
> reference = "%{tolower:type.%{Acct-Status-Type}}"
> }
> post-auth {
> reference = "."
> }
> rlm_ldap (ldap): Initialising connection pool
> pool {
> start = 5
> min = 4
> max = 32
> spare = 3
> uses = 0
> lifetime = 0
> cleanup_interval = 30
> idle_timeout = 60
> retry_delay = 1
> spread = no
> }
> rlm_ldap (ldap): Opening additional connection (0)
> rlm_ldap (ldap): Connecting to ldap.wayne.edu:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (1)
> rlm_ldap (ldap): Connecting to ldap.wayne.edu:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (2)
> rlm_ldap (ldap): Connecting to ldap.wayne.edu:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (3)
> rlm_ldap (ldap): Connecting to ldap.wayne.edu:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (4)
> rlm_ldap (ldap): Connecting to ldap.wayne.edu:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> } # modules
> radiusd: #### Loading Virtual Servers ####
> server { # from file /etc/raddb/radiusd.conf
> } # server
> server default { # from file /etc/raddb/sites-enabled/default
> # Loading authenticate {...}
> # Loading authorize {...}
> Ignoring "sql" (see raddb/mods-available/README.rst)
> # Loading preacct {...}
> # Loading accounting {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> } # server default
> server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
> # Loading authenticate {...}
> # Loading authorize {...}
> # Loading session {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> } # server inner-tunnel
> server eduroam { # from file /etc/raddb/sites-enabled/eduroam
> # Creating Auth-Type = digest
> # Loading authenticate {...}
> # Loading authorize {...}
> # Loading preacct {...}
> # Loading accounting {...}
> # Loading post-auth {...}
> } # server eduroam
> radiusd: #### Opening IP addresses and Ports ####
> listen {
> type = "auth"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "auth"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "auth"
> ipaddr = 127.0.0.1
> port = 18120
> }
> Listening on auth address * port 1812 as server default
> Listening on acct address * port 1813 as server default
> Listening on auth address :: port 1812 as server default
> Listening on acct address :: port 1813 as server default
> Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel
> Opening new proxy socket 'proxy address * port 0'
> Listening on proxy address * port 60291
> Ready to process requests
>
>
>
>
>
>
>
>
>
> Received Access-Request Id 248 from 141.217.152.122:53954 to 141.217.0.164:1812 length 157
> User-Name = 'zz9930'
> NAS-IP-Address = 141.217.152.122
> NAS-Port = 18433
> Called-Station-Id = '00:90:0b:2c:94:fd:eduroam'
> Calling-Station-Id = '00-22-5F-40-98-BA'
> Framed-MTU = 1250
> NAS-Port-Type = Wireless-802.11
> Framed-Compression = None
> Connect-Info = 'CONNECT 802.11b/g'
> Chargeable-User-Identity = 0x00
> EAP-Message = 0x0201000b017a7a39393330
> Message-Authenticator = 0x4af7ae30469b98ebfd106d14fe0f10da
> (0) Received Access-Request packet from host 141.217.152.122 port 53954, id=248, length=157
> (0) User-Name = 'zz9930'
> (0) NAS-IP-Address = 141.217.152.122
> (0) NAS-Port = 18433
> (0) Called-Station-Id = '00:90:0b:2c:94:fd:eduroam'
> (0) Calling-Station-Id = '00-22-5F-40-98-BA'
> (0) Framed-MTU = 1250
> (0) NAS-Port-Type = Wireless-802.11
> (0) Framed-Compression = None
> (0) Connect-Info = 'CONNECT 802.11b/g'
> (0) Chargeable-User-Identity = 0x00
> (0) EAP-Message = 0x0201000b017a7a39393330
> (0) Message-Authenticator = 0x4af7ae30469b98ebfd106d14fe0f10da
> (0) # Executing section authorize from file /etc/raddb/sites-enabled/default
> (0) authorize {
> (0) filter_username filter_username {
> (0) if (!&User-Name)
> (0) if (!&User-Name) -> FALSE
> (0) if (&User-Name =~ / /)
> (0) if (&User-Name =~ / /) -> FALSE
> (0) if (&User-Name =~ /@.*@/ )
> (0) if (&User-Name =~ /@.*@/ ) -> FALSE
> (0) if (&User-Name =~ /\\.\\./ )
> (0) if (&User-Name =~ /\\.\\./ ) -> FALSE
> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
> (0) if (&User-Name =~ /\\.$/)
> (0) if (&User-Name =~ /\\.$/) -> FALSE
> (0) if (&User-Name =~ /@\\./)
> (0) if (&User-Name =~ /@\\./) -> FALSE
> (0) } # filter_username filter_username = notfound
> (0) [preprocess] = ok
> (0) operator-name.authorize operator-name.authorize {
> (0) if ("%{client:Operator-Name}")
> (0) Client does not contain config item "Operator-Name"
> (0) EXPAND %{client:Operator-Name}
> (0) -->
> (0) if ("%{client:Operator-Name}") -> FALSE
> (0) } # operator-name.authorize operator-name.authorize = ok
> (0) [chap] = noop
> (0) [mschap] = noop
> (0) suffix : Checking for suffix after "@"
> (0) suffix : No '@' in User-Name = "zz9930", looking up realm NULL
> (0) suffix : No such realm "NULL"
> (0) [suffix] = noop
> (0) eap : Peer sent code Response (2) ID 1 length 11
> (0) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
> (0) [eap] = ok
> (0) } # authorize = ok
> (0) Found Auth-Type = EAP
> (0) # Executing group from file /etc/raddb/sites-enabled/default
> (0) authenticate {
> (0) eap : Peer sent method Identity (1)
> (0) eap : Calling eap_peap to process EAP data
> (0) eap_peap : Flushing SSL sessions (of #0)
> (0) eap_peap : Initiate
> (0) eap_peap : Start returned 1
> (0) eap : New EAP session, adding 'State' attribute to reply 0xa7933f27a7912648
> (0) [eap] = handled
> (0) } # authenticate = handled
> (0) Sending Access-Challenge packet to host 141.217.152.122 port 53954, id=248, length=0
> (0) EAP-Message = 0x010200061920
> (0) Message-Authenticator = 0x00000000000000000000000000000000
> (0) State = 0xa7933f27a79126486172f883c9cea508
> Sending Access-Challenge Id 248 from 141.217.0.164:1812 to 141.217.152.122:53954
> EAP-Message = 0x010200061920
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xa7933f27a79126486172f883c9cea508
> (0) Finished request
> Waking up in 0.3 seconds.
> Received Access-Request Id 249 from 141.217.152.122:53954 to 141.217.0.164:1812 length 273
> User-Name = 'zz9930'
> NAS-IP-Address = 141.217.152.122
> NAS-Port = 18433
> Called-Station-Id = '00:90:0b:2c:94:fd:eduroam'
> Calling-Station-Id = '00-22-5F-40-98-BA'
> Framed-MTU = 1250
> NAS-Port-Type = Wireless-802.11
> Framed-Compression = None
> Connect-Info = 'CONNECT 802.11b/g'
> Chargeable-User-Identity = 0x00
> EAP-Message = 0x0202006d198000000063160301005e0100005a0301590a60529d8e36c76692ebfa6a46b2e1efb66cc8299ba112b6c9f410c9384ed3000018c014c0130035002fc00ac00900380032000a00130005000401000019000a0006000400170018000b0002010000170000ff01000100
> State = 0xa7933f27a79126486172f883c9cea508
> Message-Authenticator = 0xe42d476f007c2144fba80895748be48c
> (1) Received Access-Request packet from host 141.217.152.122 port 53954, id=249, length=273
> (1) User-Name = 'zz9930'
> (1) NAS-IP-Address = 141.217.152.122
> (1) NAS-Port = 18433
> (1) Called-Station-Id = '00:90:0b:2c:94:fd:eduroam'
> (1) Calling-Station-Id = '00-22-5F-40-98-BA'
> (1) Framed-MTU = 1250
> (1) NAS-Port-Type = Wireless-802.11
> (1) Framed-Compression = None
> (1) Connect-Info = 'CONNECT 802.11b/g'
> (1) Chargeable-User-Identity = 0x00
> (1) EAP-Message = 0x0202006d198000000063160301005e0100005a0301590a60529d8e36c76692ebfa6a46b2e1efb66cc8299ba112b6c9f410c9384ed3000018c014c0130035002fc00ac00900380032000a00130005000401000019000a0006000400170018000b0002010000170000ff01000100
> (1) State = 0xa7933f27a79126486172f883c9cea508
> (1) Message-Authenticator = 0xe42d476f007c2144fba80895748be48c
> (1) # Executing section authorize from file /etc/raddb/sites-enabled/default
> (1) authorize {
> (1) filter_username filter_username {
> (1) if (!&User-Name)
> (1) if (!&User-Name) -> FALSE
> (1) if (&User-Name =~ / /)
> (1) if (&User-Name =~ / /) -> FALSE
> (1) if (&User-Name =~ /@.*@/ )
> (1) if (&User-Name =~ /@.*@/ ) -> FALSE
> (1) if (&User-Name =~ /\\.\\./ )
> (1) if (&User-Name =~ /\\.\\./ ) -> FALSE
> (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
> (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
> (1) if (&User-Name =~ /\\.$/)
> (1) if (&User-Name =~ /\\.$/) -> FALSE
> (1) if (&User-Name =~ /@\\./)
> (1) if (&User-Name =~ /@\\./) -> FALSE
> (1) } # filter_username filter_username = notfound
> (1) [preprocess] = ok
> (1) operator-name.authorize operator-name.authorize {
> (1) if ("%{client:Operator-Name}")
> (1) Client does not contain config item "Operator-Name"
> (1) EXPAND %{client:Operator-Name}
> (1) -->
> (1) if ("%{client:Operator-Name}") -> FALSE
> (1) } # operator-name.authorize operator-name.authorize = ok
> (1) [chap] = noop
> (1) [mschap] = noop
> (1) suffix : Checking for suffix after "@"
> (1) suffix : No '@' in User-Name = "zz9930", looking up realm NULL
> (1) suffix : No such realm "NULL"
> (1) [suffix] = noop
> (1) eap : Peer sent code Response (2) ID 2 length 109
> (1) eap : Continuing tunnel setup
> (1) [eap] = ok
> (1) } # authorize = ok
> (1) Found Auth-Type = EAP
> (1) # Executing group from file /etc/raddb/sites-enabled/default
> (1) authenticate {
> (1) eap : Expiring EAP session with state 0xa7933f27a7912648
> (1) eap : Finished EAP session with state 0xa7933f27a7912648
> (1) eap : Previous EAP request found for state 0xa7933f27a7912648, released from the list
> (1) eap : Peer sent method PEAP (25)
> (1) eap : EAP PEAP (25)
> (1) eap : Calling eap_peap to process EAP data
> (1) eap_peap : processing EAP-TLS
> TLS Length 99
> (1) eap_peap : Length Included
> (1) eap_peap : eaptls_verify returned 11
> (1) eap_peap : (other): before/accept initialization
> (1) eap_peap : TLS_accept: before/accept initialization
> (1) eap_peap : <<< TLS 1.0 Handshake [length 005e], ClientHello
> (1) eap_peap : TLS_accept: SSLv3 read client hello A
> (1) eap_peap : >>> TLS 1.0 Handshake [length 0059], ServerHello
> (1) eap_peap : TLS_accept: SSLv3 write server hello A
> (1) eap_peap : >>> TLS 1.0 Handshake [length 08d0], Certificate
> (1) eap_peap : TLS_accept: SSLv3 write certificate A
> (1) eap_peap : >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange
> (1) eap_peap : TLS_accept: SSLv3 write key exchange A
> (1) eap_peap : >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
> (1) eap_peap : TLS_accept: SSLv3 write server done A
> (1) eap_peap : TLS_accept: SSLv3 flush data
> (1) eap_peap : TLS_accept: Need to read more data: SSLv3 read client certificate A
> In SSL Handshake Phase
> In SSL Accept mode
> (1) eap_peap : eaptls_process returned 13
> (1) eap_peap : FR_TLS_HANDLED
> (1) eap : New EAP session, adding 'State' attribute to reply 0xa7933f27a6902648
> (1) [eap] = handled
> (1) } # authenticate = handled
> (1) Sending Access-Challenge packet to host 141.217.152.122 port 53954, id=249, length=0
> (1) EAP-Message = 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
> (1) Message-Authenticator = 0x00000000000000000000000000000000
> (1) State = 0xa7933f27a69026486172f883c9cea508
> Sending Access-Challenge Id 249 from 141.217.0.164:1812 to 141.217.152.122:53954
> EAP-Message = 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
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xa7933f27a69026486172f883c9cea508
> (1) Finished request
> Waking up in 0.2 seconds.
> Received Access-Request Id 250 from 141.217.152.122:53954 to 141.217.0.164:1812 length 170
> User-Name = 'zz9930'
> NAS-IP-Address = 141.217.152.122
> NAS-Port = 18433
> Called-Station-Id = '00:90:0b:2c:94:fd:eduroam'
> Calling-Station-Id = '00-22-5F-40-98-BA'
> Framed-MTU = 1250
> NAS-Port-Type = Wireless-802.11
> Framed-Compression = None
> Connect-Info = 'CONNECT 802.11b/g'
> Chargeable-User-Identity = 0x00
> EAP-Message = 0x020300061900
> State = 0xa7933f27a69026486172f883c9cea508
> Message-Authenticator = 0x74eb735f68854de96428bfbcc4f37892
> (2) Received Access-Request packet from host 141.217.152.122 port 53954, id=250, length=170
> (2) User-Name = 'zz9930'
> (2) NAS-IP-Address = 141.217.152.122
> (2) NAS-Port = 18433
> (2) Called-Station-Id = '00:90:0b:2c:94:fd:eduroam'
> (2) Calling-Station-Id = '00-22-5F-40-98-BA'
> (2) Framed-MTU = 1250
> (2) NAS-Port-Type = Wireless-802.11
> (2) Framed-Compression = None
> (2) Connect-Info = 'CONNECT 802.11b/g'
> (2) Chargeable-User-Identity = 0x00
> (2) EAP-Message = 0x020300061900
> (2) State = 0xa7933f27a69026486172f883c9cea508
> (2) Message-Authenticator = 0x74eb735f68854de96428bfbcc4f37892
> (2) # Executing section authorize from file /etc/raddb/sites-enabled/default
> (2) authorize {
> (2) filter_username filter_username {
> (2) if (!&User-Name)
> (2) if (!&User-Name) -> FALSE
> (2) if (&User-Name =~ / /)
> (2) if (&User-Name =~ / /) -> FALSE
> (2) if (&User-Name =~ /@.*@/ )
> (2) if (&User-Name =~ /@.*@/ ) -> FALSE
> (2) if (&User-Name =~ /\\.\\./ )
> (2) if (&User-Name =~ /\\.\\./ ) -> FALSE
> (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
> (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
> (2) if (&User-Name =~ /\\.$/)
> (2) if (&User-Name =~ /\\.$/) -> FALSE
> (2) if (&User-Name =~ /@\\./)
> (2) if (&User-Name =~ /@\\./) -> FALSE
> (2) } # filter_username filter_username = notfound
> (2) [preprocess] = ok
> (2) operator-name.authorize operator-name.authorize {
> (2) if ("%{client:Operator-Name}")
> (2) Client does not contain config item "Operator-Name"
> (2) EXPAND %{client:Operator-Name}
> (2) -->
> (2) if ("%{client:Operator-Name}") -> FALSE
> (2) } # operator-name.authorize operator-name.authorize = ok
> (2) [chap] = noop
> (2) [mschap] = noop
> (2) suffix : Checking for suffix after "@"
> (2) suffix : No '@' in User-Name = "zz9930", looking up realm NULL
> (2) suffix : No such realm "NULL"
> (2) [suffix] = noop
> (2) eap : Peer sent code Response (2) ID 3 length 6
> (2) eap : Continuing tunnel setup
> (2) [eap] = ok
> (2) } # authorize = ok
> (2) Found Auth-Type = EAP
> (2) # Executing group from file /etc/raddb/sites-enabled/default
> (2) authenticate {
> (2) eap : Expiring EAP session with state 0xa7933f27a6902648
> (2) eap : Finished EAP session with state 0xa7933f27a6902648
> (2) eap : Previous EAP request found for state 0xa7933f27a6902648, released from the list
> (2) eap : Peer sent method PEAP (25)
> (2) eap : EAP PEAP (25)
> (2) eap : Calling eap_peap to process EAP data
> (2) eap_peap : processing EAP-TLS
> (2) eap_peap : Received TLS ACK
> (2) eap_peap : Received TLS ACK
> (2) eap_peap : ACK handshake fragment handler
> (2) eap_peap : eaptls_verify returned 1
> (2) eap_peap : eaptls_process returned 13
> (2) eap_peap : FR_TLS_HANDLED
> (2) eap : New EAP session, adding 'State' attribute to reply 0xa7933f27a5972648
> (2) [eap] = handled
> (2) } # authenticate = handled
> (2) Sending Access-Challenge packet to host 141.217.152.122 port 53954, id=250, length=0
> (2) EAP-Message = 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
> (2) Message-Authenticator = 0x00000000000000000000000000000000
> (2) State = 0xa7933f27a59726486172f883c9cea508
> Sending Access-Challenge Id 250 from 141.217.0.164:1812 to 141.217.152.122:53954
> EAP-Message = 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
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xa7933f27a59726486172f883c9cea508
> (2) Finished request
> Waking up in 0.2 seconds.
> Received Access-Request Id 251 from 141.217.152.122:53954 to 141.217.0.164:1812 length 170
> User-Name = 'zz9930'
> NAS-IP-Address = 141.217.152.122
> NAS-Port = 18433
> Called-Station-Id = '00:90:0b:2c:94:fd:eduroam'
> Calling-Station-Id = '00-22-5F-40-98-BA'
> Framed-MTU = 1250
> NAS-Port-Type = Wireless-802.11
> Framed-Compression = None
> Connect-Info = 'CONNECT 802.11b/g'
> Chargeable-User-Identity = 0x00
> EAP-Message = 0x020400061900
> State = 0xa7933f27a59726486172f883c9cea508
> Message-Authenticator = 0xafbca4b22ce24d0364825cfb90817336
> (3) Received Access-Request packet from host 141.217.152.122 port 53954, id=251, length=170
> (3) User-Name = 'zz9930'
> (3) NAS-IP-Address = 141.217.152.122
> (3) NAS-Port = 18433
> (3) Called-Station-Id = '00:90:0b:2c:94:fd:eduroam'
> (3) Calling-Station-Id = '00-22-5F-40-98-BA'
> (3) Framed-MTU = 1250
> (3) NAS-Port-Type = Wireless-802.11
> (3) Framed-Compression = None
> (3) Connect-Info = 'CONNECT 802.11b/g'
> (3) Chargeable-User-Identity = 0x00
> (3) EAP-Message = 0x020400061900
> (3) State = 0xa7933f27a59726486172f883c9cea508
> (3) Message-Authenticator = 0xafbca4b22ce24d0364825cfb90817336
> (3) # Executing section authorize from file /etc/raddb/sites-enabled/default
> (3) authorize {
> (3) filter_username filter_username {
> (3) if (!&User-Name)
> (3) if (!&User-Name) -> FALSE
> (3) if (&User-Name =~ / /)
> (3) if (&User-Name =~ / /) -> FALSE
> (3) if (&User-Name =~ /@.*@/ )
> (3) if (&User-Name =~ /@.*@/ ) -> FALSE
> (3) if (&User-Name =~ /\\.\\./ )
> (3) if (&User-Name =~ /\\.\\./ ) -> FALSE
> (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
> (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
> (3) if (&User-Name =~ /\\.$/)
> (3) if (&User-Name =~ /\\.$/) -> FALSE
> (3) if (&User-Name =~ /@\\./)
> (3) if (&User-Name =~ /@\\./) -> FALSE
> (3) } # filter_username filter_username = notfound
> (3) [preprocess] = ok
> (3) operator-name.authorize operator-name.authorize {
> (3) if ("%{client:Operator-Name}")
> (3) Client does not contain config item "Operator-Name"
> (3) EXPAND %{client:Operator-Name}
> (3) -->
> (3) if ("%{client:Operator-Name}") -> FALSE
> (3) } # operator-name.authorize operator-name.authorize = ok
> (3) [chap] = noop
> (3) [mschap] = noop
> (3) suffix : Checking for suffix after "@"
> (3) suffix : No '@' in User-Name = "zz9930", looking up realm NULL
> (3) suffix : No such realm "NULL"
> (3) [suffix] = noop
> (3) eap : Peer sent code Response (2) ID 4 length 6
> (3) eap : Continuing tunnel setup
> (3) [eap] = ok
> (3) } # authorize = ok
> (3) Found Auth-Type = EAP
> (3) # Executing group from file /etc/raddb/sites-enabled/default
> (3) authenticate {
> (3) eap : Expiring EAP session with state 0xa7933f27a5972648
> (3) eap : Finished EAP session with state 0xa7933f27a5972648
> (3) eap : Previous EAP request found for state 0xa7933f27a5972648, released from the list
> (3) eap : Peer sent method PEAP (25)
> (3) eap : EAP PEAP (25)
> (3) eap : Calling eap_peap to process EAP data
> (3) eap_peap : processing EAP-TLS
> (3) eap_peap : Received TLS ACK
> (3) eap_peap : Received TLS ACK
> (3) eap_peap : ACK handshake fragment handler
> (3) eap_peap : eaptls_verify returned 1
> (3) eap_peap : eaptls_process returned 13
> (3) eap_peap : FR_TLS_HANDLED
> (3) eap : New EAP session, adding 'State' attribute to reply 0xa7933f27a4962648
> (3) [eap] = handled
> (3) } # authenticate = handled
> (3) Sending Access-Challenge packet to host 141.217.152.122 port 53954, id=251, length=0
> (3) EAP-Message = 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
> (3) Message-Authenticator = 0x00000000000000000000000000000000
> (3) State = 0xa7933f27a49626486172f883c9cea508
> Sending Access-Challenge Id 251 from 141.217.0.164:1812 to 141.217.152.122:53954
> EAP-Message = 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
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xa7933f27a49626486172f883c9cea508
> (3) Finished request
> Waking up in 0.2 seconds.
> Received Access-Request Id 252 from 141.217.152.122:53954 to 141.217.0.164:1812 length 308
> User-Name = 'zz9930'
> NAS-IP-Address = 141.217.152.122
> NAS-Port = 18433
> Called-Station-Id = '00:90:0b:2c:94:fd:eduroam'
> Calling-Station-Id = '00-22-5F-40-98-BA'
> Framed-MTU = 1250
> NAS-Port-Type = Wireless-802.11
> Framed-Compression = None
> Connect-Info = 'CONNECT 802.11b/g'
> Chargeable-User-Identity = 0x00
> EAP-Message = 0x02050090198000000086160301004610000042410499eea29feacdfdd0ca9bd381141ed49629fbde40954f1e75cc17fdc9d5ffd7c6d431f2c743feb20057c07a5821f3b4abe4cba156a387a38397d74b1c1a0d502b14030100010116030100301221a05db58de5e73e5385b2a253efc91da869175fe9f2aa2d1b2e3237e3c712d2df1077d30534f2351e8034b0aa8f2b
> State = 0xa7933f27a49626486172f883c9cea508
> Message-Authenticator = 0xbb8deb078409de6add57bd6b0074acc3
> (4) Received Access-Request packet from host 141.217.152.122 port 53954, id=252, length=308
> (4) User-Name = 'zz9930'
> (4) NAS-IP-Address = 141.217.152.122
> (4) NAS-Port = 18433
> (4) Called-Station-Id = '00:90:0b:2c:94:fd:eduroam'
> (4) Calling-Station-Id = '00-22-5F-40-98-BA'
> (4) Framed-MTU = 1250
> (4) NAS-Port-Type = Wireless-802.11
> (4) Framed-Compression = None
> (4) Connect-Info = 'CONNECT 802.11b/g'
> (4) Chargeable-User-Identity = 0x00
> (4) EAP-Message = 0x02050090198000000086160301004610000042410499eea29feacdfdd0ca9bd381141ed49629fbde40954f1e75cc17fdc9d5ffd7c6d431f2c743feb20057c07a5821f3b4abe4cba156a387a38397d74b1c1a0d502b14030100010116030100301221a05db58de5e73e5385b2a253efc91da869175fe9f2aa2d1b2e3237e3c712d2df1077d30534f2351e8034b0aa8f2b
> (4) State = 0xa7933f27a49626486172f883c9cea508
> (4) Message-Authenticator = 0xbb8deb078409de6add57bd6b0074acc3
> (4) # Executing section authorize from file /etc/raddb/sites-enabled/default
> (4) authorize {
> (4) filter_username filter_username {
> (4) if (!&User-Name)
> (4) if (!&User-Name) -> FALSE
> (4) if (&User-Name =~ / /)
> (4) if (&User-Name =~ / /) -> FALSE
> (4) if (&User-Name =~ /@.*@/ )
> (4) if (&User-Name =~ /@.*@/ ) -> FALSE
> (4) if (&User-Name =~ /\\.\\./ )
> (4) if (&User-Name =~ /\\.\\./ ) -> FALSE
> (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
> (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
> (4) if (&User-Name =~ /\\.$/)
> (4) if (&User-Name =~ /\\.$/) -> FALSE
> (4) if (&User-Name =~ /@\\./)
> (4) if (&User-Name =~ /@\\./) -> FALSE
> (4) } # filter_username filter_username = notfound
> (4) [preprocess] = ok
> (4) operator-name.authorize operator-name.authorize {
> (4) if ("%{client:Operator-Name}")
> (4) Client does not contain config item "Operator-Name"
> (4) EXPAND %{client:Operator-Name}
> (4) -->
> (4) if ("%{client:Operator-Name}") -> FALSE
> (4) } # operator-name.authorize operator-name.authorize = ok
> (4) [chap] = noop
> (4) [mschap] = noop
> (4) suffix : Checking for suffix after "@"
> (4) suffix : No '@' in User-Name = "zz9930", looking up realm NULL
> (4) suffix : No such realm "NULL"
> (4) [suffix] = noop
> (4) eap : Peer sent code Response (2) ID 5 length 144
> (4) eap : Continuing tunnel setup
> (4) [eap] = ok
> (4) } # authorize = ok
> (4) Found Auth-Type = EAP
> (4) # Executing group from file /etc/raddb/sites-enabled/default
> (4) authenticate {
> (4) eap : Expiring EAP session with state 0xa7933f27a4962648
> (4) eap : Finished EAP session with state 0xa7933f27a4962648
> (4) eap : Previous EAP request found for state 0xa7933f27a4962648, released from the list
> (4) eap : Peer sent method PEAP (25)
> (4) eap : EAP PEAP (25)
> (4) eap : Calling eap_peap to process EAP data
> (4) eap_peap : processing EAP-TLS
> TLS Length 134
> (4) eap_peap : Length Included
> (4) eap_peap : eaptls_verify returned 11
> (4) eap_peap : <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange
> (4) eap_peap : TLS_accept: SSLv3 read client key exchange A
> (4) eap_peap : <<< TLS 1.0 ChangeCipherSpec [length 0001]
> (4) eap_peap : <<< TLS 1.0 Handshake [length 0010], Finished
> (4) eap_peap : TLS_accept: SSLv3 read finished A
> (4) eap_peap : >>> TLS 1.0 ChangeCipherSpec [length 0001]
> (4) eap_peap : TLS_accept: SSLv3 write change cipher spec A
> (4) eap_peap : >>> TLS 1.0 Handshake [length 0010], Finished
> (4) eap_peap : TLS_accept: SSLv3 write finished A
> (4) eap_peap : TLS_accept: SSLv3 flush data
> SSL: adding session 1d69cd59382c1a906f18f235954d3f197e12772ac9e6f0d322e9ef69ea577c87 to cache
> (4) eap_peap : (other): SSL negotiation finished successfully
> SSL Connection Established
> (4) eap_peap : eaptls_process returned 13
> (4) eap_peap : FR_TLS_HANDLED
> (4) eap : New EAP session, adding 'State' attribute to reply 0xa7933f27a3952648
> (4) [eap] = handled
> (4) } # authenticate = handled
> (4) Sending Access-Challenge packet to host 141.217.152.122 port 53954, id=252, length=0
> (4) EAP-Message = 0x010600411900140301000101160301003097a7683d2e358052cec282d0c8d85b7d7f05c147c9e65214bca51c7057343c09e5c7e9b0d1abceb8e5cea1ed1718015a
> (4) Message-Authenticator = 0x00000000000000000000000000000000
> (4) State = 0xa7933f27a39526486172f883c9cea508
> Sending Access-Challenge Id 252 from 141.217.0.164:1812 to 141.217.152.122:53954
> EAP-Message = 0x010600411900140301000101160301003097a7683d2e358052cec282d0c8d85b7d7f05c147c9e65214bca51c7057343c09e5c7e9b0d1abceb8e5cea1ed1718015a
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xa7933f27a39526486172f883c9cea508
> (4) Finished request
> Waking up in 0.1 seconds.
> Received Access-Request Id 253 from 141.217.152.122:53954 to 141.217.0.164:1812 length 170
> User-Name = 'zz9930'
> NAS-IP-Address = 141.217.152.122
> NAS-Port = 18433
> Called-Station-Id = '00:90:0b:2c:94:fd:eduroam'
> Calling-Station-Id = '00-22-5F-40-98-BA'
> Framed-MTU = 1250
> NAS-Port-Type = Wireless-802.11
> Framed-Compression = None
> Connect-Info = 'CONNECT 802.11b/g'
> Chargeable-User-Identity = 0x00
> EAP-Message = 0x020600061900
> State = 0xa7933f27a39526486172f883c9cea508
> Message-Authenticator = 0x1194a95cbc44bbe03dc430beccdea9e4
> (5) Received Access-Request packet from host 141.217.152.122 port 53954, id=253, length=170
> (5) User-Name = 'zz9930'
> (5) NAS-IP-Address = 141.217.152.122
> (5) NAS-Port = 18433
> (5) Called-Station-Id = '00:90:0b:2c:94:fd:eduroam'
> (5) Calling-Station-Id = '00-22-5F-40-98-BA'
> (5) Framed-MTU = 1250
> (5) NAS-Port-Type = Wireless-802.11
> (5) Framed-Compression = None
> (5) Connect-Info = 'CONNECT 802.11b/g'
> (5) Chargeable-User-Identity = 0x00
> (5) EAP-Message = 0x020600061900
> (5) State = 0xa7933f27a39526486172f883c9cea508
> (5) Message-Authenticator = 0x1194a95cbc44bbe03dc430beccdea9e4
> (5) # Executing section authorize from file /etc/raddb/sites-enabled/default
> (5) authorize {
> (5) filter_username filter_username {
> (5) if (!&User-Name)
> (5) if (!&User-Name) -> FALSE
> (5) if (&User-Name =~ / /)
> (5) if (&User-Name =~ / /) -> FALSE
> (5) if (&User-Name =~ /@.*@/ )
> (5) if (&User-Name =~ /@.*@/ ) -> FALSE
> (5) if (&User-Name =~ /\\.\\./ )
> (5) if (&User-Name =~ /\\.\\./ ) -> FALSE
> (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
> (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
> (5) if (&User-Name =~ /\\.$/)
> (5) if (&User-Name =~ /\\.$/) -> FALSE
> (5) if (&User-Name =~ /@\\./)
> (5) if (&User-Name =~ /@\\./) -> FALSE
> (5) } # filter_username filter_username = notfound
> (5) [preprocess] = ok
> (5) operator-name.authorize operator-name.authorize {
> (5) if ("%{client:Operator-Name}")
> (5) Client does not contain config item "Operator-Name"
> (5) EXPAND %{client:Operator-Name}
> (5) -->
> (5) if ("%{client:Operator-Name}") -> FALSE
> (5) } # operator-name.authorize operator-name.authorize = ok
> (5) [chap] = noop
> (5) [mschap] = noop
> (5) suffix : Checking for suffix after "@"
> (5) suffix : No '@' in User-Name = "zz9930", looking up realm NULL
> (5) suffix : No such realm "NULL"
> (5) [suffix] = noop
> (5) eap : Peer sent code Response (2) ID 6 length 6
> (5) eap : Continuing tunnel setup
> (5) [eap] = ok
> (5) } # authorize = ok
> (5) Found Auth-Type = EAP
> (5) # Executing group from file /etc/raddb/sites-enabled/default
> (5) authenticate {
> (5) eap : Expiring EAP session with state 0xa7933f27a3952648
> (5) eap : Finished EAP session with state 0xa7933f27a3952648
> (5) eap : Previous EAP request found for state 0xa7933f27a3952648, released from the list
> (5) eap : Peer sent method PEAP (25)
> (5) eap : EAP PEAP (25)
> (5) eap : Calling eap_peap to process EAP data
> (5) eap_peap : processing EAP-TLS
> (5) eap_peap : Received TLS ACK
> (5) eap_peap : Received TLS ACK
> (5) eap_peap : ACK handshake is finished
> (5) eap_peap : eaptls_verify returned 3
> (5) eap_peap : eaptls_process returned 3
> (5) eap_peap : FR_TLS_SUCCESS
> (5) eap_peap : Session established. Decoding tunneled attributes
> (5) eap_peap : Peap state TUNNEL ESTABLISHED
> (5) eap : New EAP session, adding 'State' attribute to reply 0xa7933f27a2942648
> (5) [eap] = handled
> (5) } # authenticate = handled
> (5) Sending Access-Challenge packet to host 141.217.152.122 port 53954, id=253, length=0
> (5) EAP-Message = 0x0107002b1900170301002095a9aec63043a97bed432db7e3fe794bf88f0f6ca530337c1373d29e10c1b954
> (5) Message-Authenticator = 0x00000000000000000000000000000000
> (5) State = 0xa7933f27a29426486172f883c9cea508
> Sending Access-Challenge Id 253 from 141.217.0.164:1812 to 141.217.152.122:53954
> EAP-Message = 0x0107002b1900170301002095a9aec63043a97bed432db7e3fe794bf88f0f6ca530337c1373d29e10c1b954
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xa7933f27a29426486172f883c9cea508
> (5) Finished request
> Waking up in 0.1 seconds.
> Received Access-Request Id 254 from 141.217.152.122:53954 to 141.217.0.164:1812 length 207
> User-Name = 'zz9930'
> NAS-IP-Address = 141.217.152.122
> NAS-Port = 18433
> Called-Station-Id = '00:90:0b:2c:94:fd:eduroam'
> Calling-Station-Id = '00-22-5F-40-98-BA'
> Framed-MTU = 1250
> NAS-Port-Type = Wireless-802.11
> Framed-Compression = None
> Connect-Info = 'CONNECT 802.11b/g'
> Chargeable-User-Identity = 0x00
> EAP-Message = 0x0207002b190017030100206cb5837bb9a948ee44aa1c6de88133ac876f640907da876c2ec9d62d3d0de711
> State = 0xa7933f27a29426486172f883c9cea508
> Message-Authenticator = 0xc471b6d269ce0c46db09346dafead567
> (6) Received Access-Request packet from host 141.217.152.122 port 53954, id=254, length=207
> (6) User-Name = 'zz9930'
> (6) NAS-IP-Address = 141.217.152.122
> (6) NAS-Port = 18433
> (6) Called-Station-Id = '00:90:0b:2c:94:fd:eduroam'
> (6) Calling-Station-Id = '00-22-5F-40-98-BA'
> (6) Framed-MTU = 1250
> (6) NAS-Port-Type = Wireless-802.11
> (6) Framed-Compression = None
> (6) Connect-Info = 'CONNECT 802.11b/g'
> (6) Chargeable-User-Identity = 0x00
> (6) EAP-Message = 0x0207002b190017030100206cb5837bb9a948ee44aa1c6de88133ac876f640907da876c2ec9d62d3d0de711
> (6) State = 0xa7933f27a29426486172f883c9cea508
> (6) Message-Authenticator = 0xc471b6d269ce0c46db09346dafead567
> (6) # Executing section authorize from file /etc/raddb/sites-enabled/default
> (6) authorize {
> (6) filter_username filter_username {
> (6) if (!&User-Name)
> (6) if (!&User-Name) -> FALSE
> (6) if (&User-Name =~ / /)
> (6) if (&User-Name =~ / /) -> FALSE
> (6) if (&User-Name =~ /@.*@/ )
> (6) if (&User-Name =~ /@.*@/ ) -> FALSE
> (6) if (&User-Name =~ /\\.\\./ )
> (6) if (&User-Name =~ /\\.\\./ ) -> FALSE
> (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
> (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
> (6) if (&User-Name =~ /\\.$/)
> (6) if (&User-Name =~ /\\.$/) -> FALSE
> (6) if (&User-Name =~ /@\\./)
> (6) if (&User-Name =~ /@\\./) -> FALSE
> (6) } # filter_username filter_username = notfound
> (6) [preprocess] = ok
> (6) operator-name.authorize operator-name.authorize {
> (6) if ("%{client:Operator-Name}")
> (6) Client does not contain config item "Operator-Name"
> (6) EXPAND %{client:Operator-Name}
> (6) -->
> (6) if ("%{client:Operator-Name}") -> FALSE
> (6) } # operator-name.authorize operator-name.authorize = ok
> (6) [chap] = noop
> (6) [mschap] = noop
> (6) suffix : Checking for suffix after "@"
> (6) suffix : No '@' in User-Name = "zz9930", looking up realm NULL
> (6) suffix : No such realm "NULL"
> (6) [suffix] = noop
> (6) eap : Peer sent code Response (2) ID 7 length 43
> (6) eap : Continuing tunnel setup
> (6) [eap] = ok
> (6) } # authorize = ok
> (6) Found Auth-Type = EAP
> (6) # Executing group from file /etc/raddb/sites-enabled/default
> (6) authenticate {
> (6) eap : Expiring EAP session with state 0xa7933f27a2942648
> (6) eap : Finished EAP session with state 0xa7933f27a2942648
> (6) eap : Previous EAP request found for state 0xa7933f27a2942648, released from the list
> (6) eap : Peer sent method PEAP (25)
> (6) eap : EAP PEAP (25)
> (6) eap : Calling eap_peap to process EAP data
> (6) eap_peap : processing EAP-TLS
> (6) eap_peap : eaptls_verify returned 7
> (6) eap_peap : Done initial handshake
> (6) eap_peap : eaptls_process returned 7
> (6) eap_peap : FR_TLS_OK
> (6) eap_peap : Session established. Decoding tunneled attributes
> (6) eap_peap : Peap state WAITING FOR INNER IDENTITY
> (6) eap_peap : Identity - zz9930
> (6) eap_peap : Got inner identity 'zz9930'
> (6) eap_peap : Setting default EAP type for tunneled EAP session
> (6) eap_peap : Got tunneled request
> EAP-Message = 0x0207000b017a7a39393330
> server default {
> (6) eap_peap : Setting User-Name to zz9930
> Sending tunneled request
> EAP-Message = 0x0207000b017a7a39393330
> FreeRADIUS-Proxied-To = 127.0.0.1
> User-Name = 'zz9930'
> NAS-IP-Address = 141.217.152.122
> NAS-Port = 18433
> Called-Station-Id = '00:90:0b:2c:94:fd:eduroam'
> Calling-Station-Id = '00-22-5F-40-98-BA'
> Framed-MTU = 1250
> NAS-Port-Type = Wireless-802.11
> Framed-Compression = None
> Connect-Info = 'CONNECT 802.11b/g'
> Chargeable-User-Identity = 0x00
> Event-Timestamp = 'May 3 2017 18:57:17 EDT'
> server inner-tunnel {
> (6) server inner-tunnel {
> (6) Request:
> EAP-Message = 0x0207000b017a7a39393330
> FreeRADIUS-Proxied-To = 127.0.0.1
> User-Name = 'zz9930'
> NAS-IP-Address = 141.217.152.122
> NAS-Port = 18433
> Called-Station-Id = '00:90:0b:2c:94:fd:eduroam'
> Calling-Station-Id = '00-22-5F-40-98-BA'
> Framed-MTU = 1250
> NAS-Port-Type = Wireless-802.11
> Framed-Compression = None
> Connect-Info = 'CONNECT 802.11b/g'
> Chargeable-User-Identity = 0x00
> Event-Timestamp = 'May 3 2017 18:57:17 EDT'
> (6) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel
> (6) authorize {
> (6) suffix : Checking for suffix after "@"
> (6) suffix : No '@' in User-Name = "zz9930", looking up realm NULL
> (6) suffix : No such realm "NULL"
> (6) [suffix] = noop
> (6) update control {
> (6) Proxy-To-Realm := 'LOCAL'
> (6) } # update control = noop
> (6) eap : Peer sent code Response (2) ID 7 length 11
> (6) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
> (6) [eap] = ok
> (6) } # authorize = ok
> (6) Found Auth-Type = EAP
> (6) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
> (6) authenticate {
> (6) eap : Peer sent method Identity (1)
> (6) eap : Calling eap_mschapv2 to process EAP data
> (6) eap_mschapv2 : Issuing Challenge
> (6) eap : New EAP session, adding 'State' attribute to reply 0x1dbb3f611db32526
> (6) [eap] = handled
> (6) } # authenticate = handled
> (6) Reply:
> EAP-Message = 0x010800201a0108001b1017be22841cd532ad5de1b2a095c735587a7a39393330
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0x1dbb3f611db325265f8bb63a7b5a1416
> (6) } # server inner-tunnel
> } # server inner-tunnel
> (6) eap_peap : Got tunneled reply code 11
> EAP-Message = 0x010800201a0108001b1017be22841cd532ad5de1b2a095c735587a7a39393330
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0x1dbb3f611db325265f8bb63a7b5a1416
> (6) eap_peap : Got tunneled reply RADIUS code 11
> EAP-Message = 0x010800201a0108001b1017be22841cd532ad5de1b2a095c735587a7a39393330
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0x1dbb3f611db325265f8bb63a7b5a1416
> (6) eap_peap : Got tunneled Access-Challenge
> (6) eap : New EAP session, adding 'State' attribute to reply 0xa7933f27a19b2648
> (6) [eap] = handled
> (6) } # authenticate = handled
> (6) Sending Access-Challenge packet to host 141.217.152.122 port 53954, id=254, length=0
> (6) EAP-Message = 0x0108004b190017030100408fcefbce566104a3980136c63ab6695b06e56354c8af9893b15cf2b0bbe8edb3c86ad7c200714f711192fb755756a5294edcf70696f7d67d43994e54ca079c65
> (6) Message-Authenticator = 0x00000000000000000000000000000000
> (6) State = 0xa7933f27a19b26486172f883c9cea508
> Sending Access-Challenge Id 254 from 141.217.0.164:1812 to 141.217.152.122:53954
> EAP-Message = 0x0108004b190017030100408fcefbce566104a3980136c63ab6695b06e56354c8af9893b15cf2b0bbe8edb3c86ad7c200714f711192fb755756a5294edcf70696f7d67d43994e54ca079c65
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xa7933f27a19b26486172f883c9cea508
> (6) Finished request
> Waking up in 0.1 seconds.
> Received Access-Request Id 255 from 141.217.152.122:53954 to 141.217.0.164:1812 length 271
> User-Name = 'zz9930'
> NAS-IP-Address = 141.217.152.122
> NAS-Port = 18433
> Called-Station-Id = '00:90:0b:2c:94:fd:eduroam'
> Calling-Station-Id = '00-22-5F-40-98-BA'
> Framed-MTU = 1250
> NAS-Port-Type = Wireless-802.11
> Framed-Compression = None
> Connect-Info = 'CONNECT 802.11b/g'
> Chargeable-User-Identity = 0x00
> EAP-Message = 0x0208006b1900170301006029f3037acf1c46040c117e12cc7c96aefb99fdf2c15aa4a9c17985a370a00f801e217f5d03caf8871b86c4a8dcedd881c769974a48c27e7905c8c64bcc04aa00a368734d143fe67e81d4e0bff407c9cb1bff44d29672798852d840f442634561
> State = 0xa7933f27a19b26486172f883c9cea508
> Message-Authenticator = 0x5191a7ea109a39422d39790b4c40cd96
> (7) Received Access-Request packet from host 141.217.152.122 port 53954, id=255, length=271
> (7) User-Name = 'zz9930'
> (7) NAS-IP-Address = 141.217.152.122
> (7) NAS-Port = 18433
> (7) Called-Station-Id = '00:90:0b:2c:94:fd:eduroam'
> (7) Calling-Station-Id = '00-22-5F-40-98-BA'
> (7) Framed-MTU = 1250
> (7) NAS-Port-Type = Wireless-802.11
> (7) Framed-Compression = None
> (7) Connect-Info = 'CONNECT 802.11b/g'
> (7) Chargeable-User-Identity = 0x00
> (7) EAP-Message = 0x0208006b1900170301006029f3037acf1c46040c117e12cc7c96aefb99fdf2c15aa4a9c17985a370a00f801e217f5d03caf8871b86c4a8dcedd881c769974a48c27e7905c8c64bcc04aa00a368734d143fe67e81d4e0bff407c9cb1bff44d29672798852d840f442634561
> (7) State = 0xa7933f27a19b26486172f883c9cea508
> (7) Message-Authenticator = 0x5191a7ea109a39422d39790b4c40cd96
> (7) # Executing section authorize from file /etc/raddb/sites-enabled/default
> (7) authorize {
> (7) filter_username filter_username {
> (7) if (!&User-Name)
> (7) if (!&User-Name) -> FALSE
> (7) if (&User-Name =~ / /)
> (7) if (&User-Name =~ / /) -> FALSE
> (7) if (&User-Name =~ /@.*@/ )
> (7) if (&User-Name =~ /@.*@/ ) -> FALSE
> (7) if (&User-Name =~ /\\.\\./ )
> (7) if (&User-Name =~ /\\.\\./ ) -> FALSE
> (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
> (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
> (7) if (&User-Name =~ /\\.$/)
> (7) if (&User-Name =~ /\\.$/) -> FALSE
> (7) if (&User-Name =~ /@\\./)
> (7) if (&User-Name =~ /@\\./) -> FALSE
> (7) } # filter_username filter_username = notfound
> (7) [preprocess] = ok
> (7) operator-name.authorize operator-name.authorize {
> (7) if ("%{client:Operator-Name}")
> (7) Client does not contain config item "Operator-Name"
> (7) EXPAND %{client:Operator-Name}
> (7) -->
> (7) if ("%{client:Operator-Name}") -> FALSE
> (7) } # operator-name.authorize operator-name.authorize = ok
> (7) [chap] = noop
> (7) [mschap] = noop
> (7) suffix : Checking for suffix after "@"
> (7) suffix : No '@' in User-Name = "zz9930", looking up realm NULL
> (7) suffix : No such realm "NULL"
> (7) [suffix] = noop
> (7) eap : Peer sent code Response (2) ID 8 length 107
> (7) eap : Continuing tunnel setup
> (7) [eap] = ok
> (7) } # authorize = ok
> (7) Found Auth-Type = EAP
> (7) # Executing group from file /etc/raddb/sites-enabled/default
> (7) authenticate {
> (7) eap : Expiring EAP session with state 0x1dbb3f611db32526
> (7) eap : Finished EAP session with state 0xa7933f27a19b2648
> (7) eap : Previous EAP request found for state 0xa7933f27a19b2648, released from the list
> (7) eap : Peer sent method PEAP (25)
> (7) eap : EAP PEAP (25)
> (7) eap : Calling eap_peap to process EAP data
> (7) eap_peap : processing EAP-TLS
> (7) eap_peap : eaptls_verify returned 7
> (7) eap_peap : Done initial handshake
> (7) eap_peap : eaptls_process returned 7
> (7) eap_peap : FR_TLS_OK
> (7) eap_peap : Session established. Decoding tunneled attributes
> (7) eap_peap : Peap state phase2
> (7) eap_peap : EAP type MSCHAPv2 (26)
> (7) eap_peap : Got tunneled request
> EAP-Message = 0x020800411a0208003c314fa8d1b469a2f31e0b92ca0a454711c90000000000000000ef748549b6f1f9131e7db72fa686acd4e834400cb184c7ed007a7a39393330
> server default {
> (7) eap_peap : Setting User-Name to zz9930
> Sending tunneled request
> EAP-Message = 0x020800411a0208003c314fa8d1b469a2f31e0b92ca0a454711c90000000000000000ef748549b6f1f9131e7db72fa686acd4e834400cb184c7ed007a7a39393330
> FreeRADIUS-Proxied-To = 127.0.0.1
> User-Name = 'zz9930'
> State = 0x1dbb3f611db325265f8bb63a7b5a1416
> NAS-IP-Address = 141.217.152.122
> NAS-Port = 18433
> Called-Station-Id = '00:90:0b:2c:94:fd:eduroam'
> Calling-Station-Id = '00-22-5F-40-98-BA'
> Framed-MTU = 1250
> NAS-Port-Type = Wireless-802.11
> Framed-Compression = None
> Connect-Info = 'CONNECT 802.11b/g'
> Chargeable-User-Identity = 0x00
> Event-Timestamp = 'May 3 2017 18:57:17 EDT'
> server inner-tunnel {
> (7) server inner-tunnel {
> (7) Request:
> EAP-Message = 0x020800411a0208003c314fa8d1b469a2f31e0b92ca0a454711c90000000000000000ef748549b6f1f9131e7db72fa686acd4e834400cb184c7ed007a7a39393330
> FreeRADIUS-Proxied-To = 127.0.0.1
> User-Name = 'zz9930'
> State = 0x1dbb3f611db325265f8bb63a7b5a1416
> NAS-IP-Address = 141.217.152.122
> NAS-Port = 18433
> Called-Station-Id = '00:90:0b:2c:94:fd:eduroam'
> Calling-Station-Id = '00-22-5F-40-98-BA'
> Framed-MTU = 1250
> NAS-Port-Type = Wireless-802.11
> Framed-Compression = None
> Connect-Info = 'CONNECT 802.11b/g'
> Chargeable-User-Identity = 0x00
> Event-Timestamp = 'May 3 2017 18:57:17 EDT'
> (7) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel
> (7) authorize {
> (7) suffix : Checking for suffix after "@"
> (7) suffix : No '@' in User-Name = "zz9930", looking up realm NULL
> (7) suffix : No such realm "NULL"
> (7) [suffix] = noop
> (7) update control {
> (7) Proxy-To-Realm := 'LOCAL'
> (7) } # update control = noop
> (7) eap : Peer sent code Response (2) ID 8 length 65
> (7) eap : No EAP Start, assuming it's an on-going EAP conversation
> (7) [eap] = updated
> (7) [expiration] = noop
> (7) [logintime] = noop
> (7) [pap] = noop
> (7) } # authorize = updated
> (7) Found Auth-Type = EAP
> (7) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
> (7) authenticate {
> (7) eap : Expiring EAP session with state 0x1dbb3f611db32526
> (7) eap : Finished EAP session with state 0x1dbb3f611db32526
> (7) eap : Previous EAP request found for state 0x1dbb3f611db32526, released from the list
> (7) eap : Peer sent method MSCHAPv2 (26)
> (7) eap : EAP MSCHAPv2 (26)
> (7) eap : Calling eap_mschapv2 to process EAP data
> (7) eap_mschapv2 : # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
> (7) eap : Freeing handler
> (7) [eap] = reject
> (7) } # authenticate = reject
> (7) Failed to authenticate the user
> (7) Using Post-Auth-Type Reject
> (7) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
> (7) Post-Auth-Type REJECT {
> (7) attr_filter.access_reject : EXPAND %{User-Name}
> (7) attr_filter.access_reject : --> zz9930
> (7) attr_filter.access_reject : Matched entry DEFAULT at line 11
> (7) [attr_filter.access_reject] = updated
> (7) } # Post-Auth-Type REJECT = updated
> (7) Reply:
> EAP-Message = 0x04080004
> Message-Authenticator = 0x00000000000000000000000000000000
> (7) } # server inner-tunnel
> } # server inner-tunnel
> (7) eap_peap : Got tunneled reply code 3
> EAP-Message = 0x04080004
> Message-Authenticator = 0x00000000000000000000000000000000
> (7) eap_peap : Got tunneled reply RADIUS code 3
> EAP-Message = 0x04080004
> Message-Authenticator = 0x00000000000000000000000000000000
> (7) eap_peap : Tunneled authentication was rejected
> (7) eap_peap : FAILURE
> (7) eap : New EAP session, adding 'State' attribute to reply 0xa7933f27a09a2648
> (7) [eap] = handled
> (7) } # authenticate = handled
> (7) Sending Access-Challenge packet to host 141.217.152.122 port 53954, id=255, length=0
> (7) EAP-Message = 0x0109002b190017030100209a97f58e0dfbf3e65962a6a2440c35255bc1a5e9b6e4f950d4eb8546a47c420c
> (7) Message-Authenticator = 0x00000000000000000000000000000000
> (7) State = 0xa7933f27a09a26486172f883c9cea508
> Sending Access-Challenge Id 255 from 141.217.0.164:1812 to 141.217.152.122:53954
> EAP-Message = 0x0109002b190017030100209a97f58e0dfbf3e65962a6a2440c35255bc1a5e9b6e4f950d4eb8546a47c420c
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xa7933f27a09a26486172f883c9cea508
> (7) Finished request
> Received Access-Request Id 0 from 141.217.152.122:53954 to 141.217.0.164:1812 length 207
> User-Name = 'zz9930'
> NAS-IP-Address = 141.217.152.122
> NAS-Port = 18433
> Called-Station-Id = '00:90:0b:2c:94:fd:eduroam'
> Calling-Station-Id = '00-22-5F-40-98-BA'
> Framed-MTU = 1250
> NAS-Port-Type = Wireless-802.11
> Framed-Compression = None
> Connect-Info = 'CONNECT 802.11b/g'
> Chargeable-User-Identity = 0x00
> EAP-Message = 0x0209002b19001703010020d6a41b5d552fc8ce1d5d7a417bbad3e02e1cc86f3762effb71e106e6b413029f
> State = 0xa7933f27a09a26486172f883c9cea508
> Message-Authenticator = 0x6c02a9d61f9d534f23789253c7f1d531
> (8) Received Access-Request packet from host 141.217.152.122 port 53954, id=0, length=207
> (8) User-Name = 'zz9930'
> (8) NAS-IP-Address = 141.217.152.122
> (8) NAS-Port = 18433
> (8) Called-Station-Id = '00:90:0b:2c:94:fd:eduroam'
> (8) Calling-Station-Id = '00-22-5F-40-98-BA'
> (8) Framed-MTU = 1250
> (8) NAS-Port-Type = Wireless-802.11
> (8) Framed-Compression = None
> (8) Connect-Info = 'CONNECT 802.11b/g'
> (8) Chargeable-User-Identity = 0x00
> (8) EAP-Message = 0x0209002b19001703010020d6a41b5d552fc8ce1d5d7a417bbad3e02e1cc86f3762effb71e106e6b413029f
> (8) State = 0xa7933f27a09a26486172f883c9cea508
> (8) Message-Authenticator = 0x6c02a9d61f9d534f23789253c7f1d531
> (8) # Executing section authorize from file /etc/raddb/sites-enabled/default
> (8) authorize {
> (8) filter_username filter_username {
> (8) if (!&User-Name)
> (8) if (!&User-Name) -> FALSE
> (8) if (&User-Name =~ / /)
> (8) if (&User-Name =~ / /) -> FALSE
> (8) if (&User-Name =~ /@.*@/ )
> (8) if (&User-Name =~ /@.*@/ ) -> FALSE
> (8) if (&User-Name =~ /\\.\\./ )
> (8) if (&User-Name =~ /\\.\\./ ) -> FALSE
> (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
> (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE
> (8) if (&User-Name =~ /\\.$/)
> (8) if (&User-Name =~ /\\.$/) -> FALSE
> (8) if (&User-Name =~ /@\\./)
> (8) if (&User-Name =~ /@\\./) -> FALSE
> (8) } # filter_username filter_username = notfound
> (8) [preprocess] = ok
> (8) operator-name.authorize operator-name.authorize {
> (8) if ("%{client:Operator-Name}")
> (8) Client does not contain config item "Operator-Name"
> (8) EXPAND %{client:Operator-Name}
> (8) -->
> (8) if ("%{client:Operator-Name}") -> FALSE
> (8) } # operator-name.authorize operator-name.authorize = ok
> (8) [chap] = noop
> (8) [mschap] = noop
> (8) suffix : Checking for suffix after "@"
> (8) suffix : No '@' in User-Name = "zz9930", looking up realm NULL
> (8) suffix : No such realm "NULL"
> (8) [suffix] = noop
> (8) eap : Peer sent code Response (2) ID 9 length 43
> (8) eap : Continuing tunnel setup
> (8) [eap] = ok
> (8) } # authorize = ok
> (8) Found Auth-Type = EAP
> (8) # Executing group from file /etc/raddb/sites-enabled/default
> (8) authenticate {
> (8) eap : Expiring EAP session with state 0xa7933f27a09a2648
> (8) eap : Finished EAP session with state 0xa7933f27a09a2648
> (8) eap : Previous EAP request found for state 0xa7933f27a09a2648, released from the list
> (8) eap : Peer sent method PEAP (25)
> (8) eap : EAP PEAP (25)
> (8) eap : Calling eap_peap to process EAP data
> (8) eap_peap : processing EAP-TLS
> (8) eap_peap : eaptls_verify returned 7
> (8) eap_peap : Done initial handshake
> (8) eap_peap : eaptls_process returned 7
> (8) eap_peap : FR_TLS_OK
> (8) eap_peap : Session established. Decoding tunneled attributes
> (8) eap_peap : Peap state send tlv failure
> (8) eap_peap : Received EAP-TLV response
> (8) eap_peap : The users session was previously rejected: returning reject (again.)
> (8) eap_peap : *** This means you need to read the PREVIOUS messages in the debug output
> (8) eap_peap : *** to find out the reason why the user was rejected
> (8) eap_peap : *** Look for "reject" or "fail". Those earlier messages will tell you
> (8) eap_peap : *** what went wrong, and how to fix the problem
> SSL: Removing session 1d69cd59382c1a906f18f235954d3f197e12772ac9e6f0d322e9ef69ea577c87 from the cache
> (8) ERROR: eap : Failed continuing EAP PEAP (25) session. EAP sub-module failed
> (8) eap : Failed in EAP select
> (8) [eap] = invalid
> (8) } # authenticate = invalid
> (8) Failed to authenticate the user
> (8) Using Post-Auth-Type Reject
> (8) # Executing group from file /etc/raddb/sites-enabled/default
> (8) Post-Auth-Type REJECT {
> (8) attr_filter.access_reject : EXPAND %{User-Name}
> (8) attr_filter.access_reject : --> zz9930
> (8) attr_filter.access_reject : Matched entry DEFAULT at line 11
> (8) [attr_filter.access_reject] = updated
> (8) eap : Reply already contained an EAP-Message, not inserting EAP-Failure
> (8) [eap] = noop
> (8) remove_reply_message_if_eap remove_reply_message_if_eap {
> (8) if (&reply:EAP-Message && &reply:Reply-Message)
> (8) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
> (8) else else {
> (8) [noop] = noop
> (8) } # else else = noop
> (8) } # remove_reply_message_if_eap remove_reply_message_if_eap = noop
> (8) } # Post-Auth-Type REJECT = updated
> (8) Delaying response for 1 seconds
> Waking up in 0.6 seconds.
> (8) Sending delayed response
> (8) Sending Access-Reject packet to host 141.217.152.122 port 53954, id=0, length=0
> (8) EAP-Message = 0x04090004
> (8) Message-Authenticator = 0x00000000000000000000000000000000
> Sending Access-Reject Id 0 from 141.217.0.164:1812 to 141.217.152.122:53954
> EAP-Message = 0x04090004
> Message-Authenticator = 0x00000000000000000000000000000000
> Waking up in 3.7 seconds.
> (0) Cleaning up request packet ID 248 with timestamp +751
> (1) Cleaning up request packet ID 249 with timestamp +751
> (2) Cleaning up request packet ID 250 with timestamp +751
> (3) Cleaning up request packet ID 251 with timestamp +751
> (4) Cleaning up request packet ID 252 with timestamp +751
> (5) Cleaning up request packet ID 253 with timestamp +751
> (6) Cleaning up request packet ID 254 with timestamp +751
> (7) Cleaning up request packet ID 255 with timestamp +751
> (8) Cleaning up request packet ID 0 with timestamp +751
> Ready to process requests
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list