Radacct not working

[Yahn do Amaral Almeida Pinheiro]

Ok, thanks a lot for the help.

2017-11-16 18:34 GMT-02:00 Alan DeKok <aland at deployingradius.com>:

> On Nov 16, 2017, at 3:27 PM, Yahn do Amaral Almeida Pinheiro <
> yahnaamaralp at gmail.com> wrote:
> >
> > I apologize, I'm still learning how to set the radius and I do not speak
> fluent English.
>
>   Your English is fine.
>
> > But when the user connects, he should not automatically insert the
> access into the radacct table? Because my radius is not doing this first
> insert.
>
>   The radacct table is for accounting packets.
>
>   If the user is authenticated (i.e. FreeRADIUS sends an Access-Accept),
> that does NOT mean the user is on the network.  Therefore, there are no
> changes to the radacct table made at that time.
>
>   After the NAS finally *receives* the Access-Accept, and then lets the
> user on the network.... that's when the user is on the network.
>
>   The NAS *should* send an Accounting-Request packet, which tells
> FreeRADIUS that the user is actually on the network.  At that point,
> FreeRADIUS updates the radacct table.
>
>   If the NAS isn't sending Accounting-Request packets, change the NAS
> configuration to make it send those packets.
>
>   If the NAS can't send Accounting-Request packets, throw it in the
> garbage, and replace it with a NAS that does send Accounting-Request
> packets.
>
>   Alan DeKok.
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/
> list/users.html
>