Windows cannot authenticate with Freeradius
Matthew Pulis
mpulis at gmail.com
Sat Sep 2 13:45:48 CEST 2017
Dear Alan
I transferred ca.pem to the client and double clicked it and hit install.
Isn't that how it should be?
Will post the Auth section on Monday since I'm away from server.
Thanks both
On Sep 1, 2017 9:38 PM, "Matthew Pulis" <mpulis at gmail.com> wrote:
> Dear Alan
>
> As always many thanks for your support. May I ask you which guide are you
> referring to please?
>
> Does Android authenticate differently to Windows?
>
> Thanks
>
> On Sep 1, 2017 7:20 PM, "Matthew Pulis" <mpulis at gmail.com> wrote:
>
>> Dear Alan
>>
>> I installed the server certificate on the client and we proceeded one
>> step further. Now it is even more complicated because there are no errors
>> yet the connection to WiFi is still failing. Can I borrow your mind on this
>> one please? Thanks for your support. Extremely appreciated
>>
>>
>>
>> radius at radius:~$ sudo freeradius -X
>> FreeRADIUS Version 3.0.15
>> Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
>> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
>> PARTICULAR PURPOSE
>> You may redistribute copies of FreeRADIUS under the terms of the
>> GNU General Public License
>> For more information about these matters, see the file named COPYRIGHT
>> Starting - reading configuration files ...
>> including dictionary file /usr/share/freeradius/dictionary
>> including dictionary file /usr/share/freeradius/dictionary.dhcp
>> including dictionary file /usr/share/freeradius/dictionary.vqp
>> including dictionary file /etc/freeradius/dictionary
>> including configuration file /etc/freeradius/radiusd.conf
>> including configuration file /etc/freeradius/proxy.conf
>> including configuration file /etc/freeradius/clients.conf
>> including files in directory /etc/freeradius/mods-enabled/
>> including configuration file /etc/freeradius/mods-enabled/mschap
>> including configuration file /etc/freeradius/mods-enabled/adldap
>> including configuration file /etc/freeradius/mods-enabled/always
>> including configuration file /etc/freeradius/mods-enabled/soh
>> including configuration file /etc/freeradius/mods-enabled/eap
>> including configuration file /etc/freeradius/mods-enabled/dynamic_clients
>> including configuration file /etc/freeradius/mods-enabled/logintime
>> including configuration file /etc/freeradius/mods-enabled/exec
>> including configuration file /etc/freeradius/mods-enabled/realm
>> including configuration file /etc/freeradius/mods-enabled/utf8
>> including configuration file /etc/freeradius/mods-enabled/date
>> including configuration file /etc/freeradius/mods-enabled/echo
>> including configuration file /etc/freeradius/mods-enabled/unix
>> including configuration file /etc/freeradius/mods-enabled/detail.log
>> including configuration file /etc/freeradius/mods-enabled/expr
>> including configuration file /etc/freeradius/mods-enabled/ntlm_auth
>> including configuration file /etc/freeradius/mods-enabled/pap
>> including configuration file /etc/freeradius/mods-enabled/ldap
>> including configuration file /etc/freeradius/mods-enabled/digest
>> including configuration file /etc/freeradius/mods-enabled/files
>> including configuration file /etc/freeradius/mods-enabled/preprocess
>> including configuration file /etc/freeradius/mods-enabled/cache_eap
>> including configuration file /etc/freeradius/mods-enabled/detail
>> including configuration file /etc/freeradius/mods-enabled/expiration
>> including configuration file /etc/freeradius/mods-enabled/chap
>> including configuration file /etc/freeradius/mods-enabled/sradutmp
>> including configuration file /etc/freeradius/mods-enabled/radutmp
>> including configuration file /etc/freeradius/mods-enabled/passwd
>> including configuration file /etc/freeradius/mods-enabled/linelog
>> including configuration file /etc/freeradius/mods-enabled/unpack
>> including configuration file /etc/freeradius/mods-enabled/attr_filter
>> including configuration file /etc/freeradius/mods-enabled/replicate
>> including files in directory /etc/freeradius/policy.d/
>> including configuration file /etc/freeradius/policy.d/filter
>> including configuration file /etc/freeradius/policy.d/control
>> including configuration file /etc/freeradius/policy.d/canonicalization
>> including configuration file /etc/freeradius/policy.d/eap
>> including configuration file /etc/freeradius/policy.d/debug
>> including configuration file /etc/freeradius/policy.d/dhcp
>> including configuration file /etc/freeradius/policy.d/moons
>> hot-targeted-ids
>> including configuration file /etc/freeradius/policy.d/accounting
>> including configuration file /etc/freeradius/policy.d/abfab-tr
>> including configuration file /etc/freeradius/policy.d/cui
>> including configuration file /etc/freeradius/policy.d/operator-name
>> including files in directory /etc/freeradius/sites-enabled/
>> including configuration file /etc/freeradius/sites-enabled/inner-tunnel
>> including configuration file /etc/freeradius/sites-enabled/default
>> main {
>> security {
>> user = "freerad"
>> group = "freerad"
>> allow_core_dumps = no
>> }
>> name = "freeradius"
>> prefix = "/usr"
>> localstatedir = "/var"
>> logdir = "/var/log/freeradius"
>> run_dir = "/var/run/freeradius"
>> }
>> main {
>> name = "freeradius"
>> prefix = "/usr"
>> localstatedir = "/var"
>> sbindir = "/usr/sbin"
>> logdir = "/var/log/freeradius"
>> run_dir = "/var/run/freeradius"
>> libdir = "/usr/lib/freeradius"
>> radacctdir = "/var/log/freeradius/radacct"
>> hostname_lookups = no
>> max_request_time = 30
>> cleanup_delay = 5
>> max_requests = 16384
>> pidfile = "/var/run/freeradius/freeradius.pid"
>> checkrad = "/usr/sbin/checkrad"
>> debug_level = 0
>> proxy_requests = yes
>> log {
>> stripped_names = no
>> auth = no
>> auth_badpass = no
>> auth_goodpass = no
>> colourise = yes
>> msg_denied = "You are already logged in - access denied"
>> }
>> resources {
>> }
>> security {
>> max_attributes = 200
>> reject_delay = 1.000000
>> status_server = yes
>> }
>> }
>> radiusd: #### Loading Realms and Home Servers ####
>> proxy server {
>> retry_delay = 5
>> retry_count = 3
>> default_fallback = no
>> dead_time = 120
>> wake_all_if_all_dead = no
>> }
>> home_server localhost {
>> ipaddr = 127.0.0.1
>> port = 1812
>> type = "auth"
>> secret = <<< secret >>>
>> response_window = 20.000000
>> response_timeouts = 1
>> max_outstanding = 65536
>> zombie_period = 40
>> status_check = "status-server"
>> ping_interval = 30
>> check_interval = 30
>> check_timeout = 4
>> num_answers_to_alive = 3
>> revive_interval = 120
>> limit {
>> max_connections = 16
>> max_requests = 0
>> lifetime = 0
>> idle_timeout = 0
>> }
>> coa {
>> irt = 2
>> mrt = 16
>> mrc = 5
>> mrd = 30
>> }
>> }
>> home_server_pool my_auth_failover {
>> type = fail-over
>> home_server = localhost
>> }
>> realm example.com {
>> auth_pool = my_auth_failover
>> }
>> realm LOCAL {
>> }
>> radiusd: #### Loading Clients ####
>> client localhost {
>> ipaddr = 127.0.0.1
>> require_message_authenticator = no
>> secret = <<< secret >>>
>> nas_type = "other"
>> proto = "*"
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> client localhost_ipv6 {
>> ipv6addr = ::1
>> require_message_authenticator = no
>> secret = <<< secret >>>
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> client 192.168.100.1/24 {
>> require_message_authenticator = no
>> secret = <<< secret >>>
>> shortname = "NAS"
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
>> 192.168.100.1/24. Please fix your configuration
>> Support for old-style clients will be removed in a future release
>> Debugger not attached
>> # Creating Auth-Type = eap
>> # Creating Auth-Type = PAP
>> # Creating Auth-Type = CHAP
>> # Creating Auth-Type = MS-CHAP
>> # Creating Auth-Type = digest
>> radiusd: #### Instantiating modules ####
>> modules {
>> # Loaded module rlm_mschap
>> # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
>> mschap {
>> use_mppe = yes
>> require_encryption = no
>> require_strong = no
>> with_ntdomain_hack = yes
>> passchange {
>> }
>> allow_retry = yes
>> winbind_retry_with_normalised_username = no
>> }
>> # Loaded module rlm_ldap
>> # Loading module "adldap" from file /etc/freeradius/mods-enabled/adldap
>> ldap adldap {
>> server = "localhost"
>> identity = "cn=admin,dc=seminary,dc=local"
>> password = <<< secret >>>
>> sasl {
>> }
>> user {
>> scope = "sub"
>> access_positive = yes
>> sasl {
>> }
>> }
>> group {
>> filter = "(objectClass=posixGroup)"
>> scope = "sub"
>> name_attribute = "cn"
>> membership_attribute = "memberOf"
>> cacheable_name = no
>> cacheable_dn = no
>> }
>> client {
>> filter = "(objectClass=radiusClient)"
>> scope = "sub"
>> base_dn = "ou=School,dc=seminary,dc=ad"
>> }
>> profile {
>> }
>> options {
>> ldap_debug = 40
>> chase_referrals = yes
>> rebind = yes
>> net_timeout = 1
>> res_timeout = 10
>> srv_timelimit = 3
>> idle = 60
>> probes = 3
>> interval = 3
>> }
>> tls {
>> start_tls = no
>> }
>> }
>> Creating attribute adldap-LDAP-Group
>> # Loaded module rlm_always
>> # Loading module "reject" from file /etc/freeradius/mods-enabled/always
>> always reject {
>> rcode = "reject"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "fail" from file /etc/freeradius/mods-enabled/always
>> always fail {
>> rcode = "fail"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "ok" from file /etc/freeradius/mods-enabled/always
>> always ok {
>> rcode = "ok"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "handled" from file /etc/freeradius/mods-enabled/a
>> lways
>> always handled {
>> rcode = "handled"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "invalid" from file /etc/freeradius/mods-enabled/a
>> lways
>> always invalid {
>> rcode = "invalid"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "userlock" from file /etc/freeradius/mods-enabled/a
>> lways
>> always userlock {
>> rcode = "userlock"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "notfound" from file /etc/freeradius/mods-enabled/a
>> lways
>> always notfound {
>> rcode = "notfound"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "noop" from file /etc/freeradius/mods-enabled/always
>> always noop {
>> rcode = "noop"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "updated" from file /etc/freeradius/mods-enabled/a
>> lways
>> always updated {
>> rcode = "updated"
>> simulcount = 0
>> mpp = no
>> }
>> # Loaded module rlm_soh
>> # Loading module "soh" from file /etc/freeradius/mods-enabled/soh
>> soh {
>> dhcp = yes
>> }
>> # Loaded module rlm_eap
>> # Loading module "eap" from file /etc/freeradius/mods-enabled/eap
>> eap {
>> default_eap_type = "ttls"
>> timer_expire = 60
>> ignore_unknown_eap_types = no
>> cisco_accounting_username_bug = no
>> max_sessions = 16384
>> }
>> # Loaded module rlm_dynamic_clients
>> # Loading module "dynamic_clients" from file
>> /etc/freeradius/mods-enabled/dynamic_clients
>> # Loaded module rlm_logintime
>> # Loading module "logintime" from file /etc/freeradius/mods-enabled/l
>> ogintime
>> logintime {
>> minimum_timeout = 60
>> }
>> # Loaded module rlm_exec
>> # Loading module "exec" from file /etc/freeradius/mods-enabled/exec
>> exec {
>> wait = no
>> input_pairs = "request"
>> shell_escape = yes
>> timeout = 10
>> }
>> # Loaded module rlm_realm
>> # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
>> realm IPASS {
>> format = "prefix"
>> delimiter = "/"
>> ignore_default = no
>> ignore_null = no
>> }
>> # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
>> realm suffix {
>> format = "suffix"
>> delimiter = "@"
>> ignore_default = no
>> ignore_null = no
>> }
>> # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/r
>> ealm
>> realm realmpercent {
>> format = "suffix"
>> delimiter = "%"
>> ignore_default = no
>> ignore_null = no
>> }
>> # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/r
>> ealm
>> realm ntdomain {
>> format = "prefix"
>> delimiter = "\\"
>> ignore_default = no
>> ignore_null = no
>> }
>> # Loaded module rlm_utf8
>> # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
>> # Loaded module rlm_date
>> # Loading module "date" from file /etc/freeradius/mods-enabled/date
>> date {
>> format = "%b %e %Y %H:%M:%S %Z"
>> utc = no
>> }
>> # Loading module "echo" from file /etc/freeradius/mods-enabled/echo
>> exec echo {
>> wait = yes
>> program = "/bin/echo %{User-Name}"
>> input_pairs = "request"
>> output_pairs = "reply"
>> shell_escape = yes
>> }
>> # Loaded module rlm_unix
>> # Loading module "unix" from file /etc/freeradius/mods-enabled/unix
>> unix {
>> radwtmp = "/var/log/freeradius/radwtmp"
>> }
>> Creating attribute Unix-Group
>> # Loaded module rlm_detail
>> # Loading module "auth_log" from file /etc/freeradius/mods-enabled/d
>> etail.log
>> detail auth_log {
>> filename = "/var/log/freeradius/radacct/%
>> {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-
>> detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> escape_filenames = no
>> log_packet_header = no
>> }
>> # Loading module "reply_log" from file /etc/freeradius/mods-enabled/d
>> etail.log
>> detail reply_log {
>> filename = "/var/log/freeradius/radacct/%
>> {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply
>> -detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> escape_filenames = no
>> log_packet_header = no
>> }
>> # Loading module "pre_proxy_log" from file
>> /etc/freeradius/mods-enabled/detail.log
>> detail pre_proxy_log {
>> filename = "/var/log/freeradius/radacct/%
>> {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-p
>> roxy-detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> escape_filenames = no
>> log_packet_header = no
>> }
>> # Loading module "post_proxy_log" from file
>> /etc/freeradius/mods-enabled/detail.log
>> detail post_proxy_log {
>> filename = "/var/log/freeradius/radacct/%
>> {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-
>> proxy-detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> escape_filenames = no
>> log_packet_header = no
>> }
>> # Loaded module rlm_expr
>> # Loading module "expr" from file /etc/freeradius/mods-enabled/expr
>> expr {
>> safe_characters = "@abcdefghijklmnopqrstuvwxyzAB
>> CDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆ
>> ÇÈÉÊËÎÏÔŒÙÛÜŸ"
>> }
>> # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/n
>> tlm_auth
>> exec ntlm_auth {
>> wait = yes
>> program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
>> --username=%{mschap:User-Name} --password=%{User-Password}"
>> shell_escape = yes
>> }
>> # Loaded module rlm_pap
>> # Loading module "pap" from file /etc/freeradius/mods-enabled/pap
>> pap {
>> normalise = yes
>> }
>> # Loading module "ldap" from file /etc/freeradius/mods-enabled/ldap
>> ldap {
>> server = "localhost"
>> identity = "cn=admin,dc=seminary,dc=local"
>> password = <<< secret >>>
>> sasl {
>> }
>> user {
>> scope = "sub"
>> access_positive = yes
>> sasl {
>> }
>> }
>> group {
>> filter = "(objectClass=posixGroup)"
>> scope = "sub"
>> name_attribute = "cn"
>> membership_attribute = "memberOf"
>> cacheable_name = no
>> cacheable_dn = no
>> }
>> client {
>> filter = "(objectClass=radiusClient)"
>> scope = "sub"
>> base_dn = "ou=SeminaryOU,dc=seminary,dc=local"
>> }
>> profile {
>> }
>> options {
>> ldap_debug = 40
>> chase_referrals = yes
>> rebind = yes
>> net_timeout = 1
>> res_timeout = 10
>> srv_timelimit = 3
>> idle = 60
>> probes = 3
>> interval = 3
>> }
>> tls {
>> start_tls = no
>> }
>> }
>> Creating attribute LDAP-Group
>> # Loaded module rlm_digest
>> # Loading module "digest" from file /etc/freeradius/mods-enabled/digest
>> # Loaded module rlm_files
>> # Loading module "files" from file /etc/freeradius/mods-enabled/files
>> files {
>> filename = "/etc/freeradius/mods-config/files/authorize"
>> acctusersfile = "/etc/freeradius/mods-config/files/accounting"
>> preproxy_usersfile = "/etc/freeradius/mods-config/f
>> iles/pre-proxy"
>> }
>> # Loaded module rlm_preprocess
>> # Loading module "preprocess" from file /etc/freeradius/mods-enabled/p
>> reprocess
>> preprocess {
>> huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
>> hints = "/etc/freeradius/mods-config/preprocess/hints"
>> with_ascend_hack = no
>> ascend_channels_per_line = 23
>> with_ntdomain_hack = no
>> with_specialix_jetstream_hack = no
>> with_cisco_vsa_hack = no
>> with_alvarion_vsa_hack = no
>> }
>> # Loaded module rlm_cache
>> # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/c
>> ache_eap
>> cache cache_eap {
>> driver = "rlm_cache_rbtree"
>> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
>> ttl = 15
>> max_entries = 0
>> epoch = 0
>> add_stats = no
>> }
>> # Loading module "detail" from file /etc/freeradius/mods-enabled/detail
>> detail {
>> filename = "/var/log/freeradius/radacct/%
>> {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> escape_filenames = no
>> log_packet_header = no
>> }
>> # Loaded module rlm_expiration
>> # Loading module "expiration" from file /etc/freeradius/mods-enabled/e
>> xpiration
>> # Loaded module rlm_chap
>> # Loading module "chap" from file /etc/freeradius/mods-enabled/chap
>> # Loaded module rlm_radutmp
>> # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/s
>> radutmp
>> radutmp sradutmp {
>> filename = "/var/log/freeradius/sradutmp"
>> username = "%{User-Name}"
>> case_sensitive = yes
>> check_with_nas = yes
>> permissions = 420
>> caller_id = no
>> }
>> # Loading module "radutmp" from file /etc/freeradius/mods-enabled/r
>> adutmp
>> radutmp {
>> filename = "/var/log/freeradius/radutmp"
>> username = "%{User-Name}"
>> case_sensitive = yes
>> check_with_nas = yes
>> permissions = 384
>> caller_id = yes
>> }
>> # Loaded module rlm_passwd
>> # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/p
>> asswd
>> passwd etc_passwd {
>> filename = "/etc/passwd"
>> format = "*User-Name:Crypt-Password:"
>> delimiter = ":"
>> ignore_nislike = no
>> ignore_empty = yes
>> allow_multiple_keys = no
>> hash_size = 100
>> }
>> # Loaded module rlm_linelog
>> # Loading module "linelog" from file /etc/freeradius/mods-enabled/l
>> inelog
>> linelog {
>> filename = "/var/log/freeradius/linelog"
>> escape_filenames = no
>> syslog_severity = "info"
>> permissions = 384
>> format = "This is a log message for %{User-Name}"
>> reference = "messages.%{%{reply:Packet-Type}:-default}"
>> }
>> # Loading module "log_accounting" from file
>> /etc/freeradius/mods-enabled/linelog
>> linelog log_accounting {
>> filename = "/var/log/freeradius/linelog-accounting"
>> escape_filenames = no
>> syslog_severity = "info"
>> permissions = 384
>> format = ""
>> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
>> }
>> # Loaded module rlm_unpack
>> # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
>> # Loaded module rlm_attr_filter
>> # Loading module "attr_filter.post-proxy" from file
>> /etc/freeradius/mods-enabled/attr_filter
>> attr_filter attr_filter.post-proxy {
>> filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
>> key = "%{Realm}"
>> relaxed = no
>> }
>> # Loading module "attr_filter.pre-proxy" from file
>> /etc/freeradius/mods-enabled/attr_filter
>> attr_filter attr_filter.pre-proxy {
>> filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
>> key = "%{Realm}"
>> relaxed = no
>> }
>> # Loading module "attr_filter.access_reject" from file
>> /etc/freeradius/mods-enabled/attr_filter
>> attr_filter attr_filter.access_reject {
>> filename = "/etc/freeradius/mods-config/a
>> ttr_filter/access_reject"
>> key = "%{User-Name}"
>> relaxed = no
>> }
>> # Loading module "attr_filter.access_challenge" from file
>> /etc/freeradius/mods-enabled/attr_filter
>> attr_filter attr_filter.access_challenge {
>> filename = "/etc/freeradius/mods-config/a
>> ttr_filter/access_challenge"
>> key = "%{User-Name}"
>> relaxed = no
>> }
>> # Loading module "attr_filter.accounting_response" from file
>> /etc/freeradius/mods-enabled/attr_filter
>> attr_filter attr_filter.accounting_response {
>> filename = "/etc/freeradius/mods-config/a
>> ttr_filter/accounting_response"
>> key = "%{User-Name}"
>> relaxed = no
>> }
>> # Loaded module rlm_replicate
>> # Loading module "replicate" from file /etc/freeradius/mods-enabled/r
>> eplicate
>> instantiate {
>> }
>> # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/m
>> schap
>> rlm_mschap (mschap): using internal authentication
>> # Instantiating module "adldap" from file /etc/freeradius/mods-enabled/a
>> dldap
>> rlm_ldap: libldap vendor: OpenLDAP, version: 20442
>> accounting {
>> reference = "%{tolower:type.%{Acct-Status-Type}}"
>> }
>> post-auth {
>> reference = "."
>> }
>> rlm_ldap (adldap): Initialising connection pool
>> pool {
>> start = 5
>> min = 3
>> max = 32
>> spare = 10
>> uses = 0
>> lifetime = 0
>> cleanup_interval = 30
>> idle_timeout = 60
>> retry_delay = 30
>> spread = no
>> }
>> rlm_ldap (adldap): Opening additional connection (0), 1 of 32 pending
>> slots used
>> rlm_ldap (adldap): Connecting to ldap://localhost:389
>> rlm_ldap (adldap): Waiting for bind result...
>> rlm_ldap (adldap): Bind successful
>> rlm_ldap (adldap): Opening additional connection (1), 1 of 31 pending
>> slots used
>> rlm_ldap (adldap): Connecting to ldap://localhost:389
>> rlm_ldap (adldap): Waiting for bind result...
>> rlm_ldap (adldap): Bind successful
>> rlm_ldap (adldap): Opening additional connection (2), 1 of 30 pending
>> slots used
>> rlm_ldap (adldap): Connecting to ldap://localhost:389
>> rlm_ldap (adldap): Waiting for bind result...
>> rlm_ldap (adldap): Bind successful
>> rlm_ldap (adldap): Opening additional connection (3), 1 of 29 pending
>> slots used
>> rlm_ldap (adldap): Connecting to ldap://localhost:389
>> rlm_ldap (adldap): Waiting for bind result...
>> rlm_ldap (adldap): Bind successful
>> rlm_ldap (adldap): Opening additional connection (4), 1 of 28 pending
>> slots used
>> rlm_ldap (adldap): Connecting to ldap://localhost:389
>> rlm_ldap (adldap): Waiting for bind result...
>> rlm_ldap (adldap): Bind successful
>> # Instantiating module "reject" from file /etc/freeradius/mods-enabled/a
>> lways
>> # Instantiating module "fail" from file /etc/freeradius/mods-enabled/a
>> lways
>> # Instantiating module "ok" from file /etc/freeradius/mods-enabled/a
>> lways
>> # Instantiating module "handled" from file
>> /etc/freeradius/mods-enabled/always
>> # Instantiating module "invalid" from file
>> /etc/freeradius/mods-enabled/always
>> # Instantiating module "userlock" from file
>> /etc/freeradius/mods-enabled/always
>> # Instantiating module "notfound" from file
>> /etc/freeradius/mods-enabled/always
>> # Instantiating module "noop" from file /etc/freeradius/mods-enabled/a
>> lways
>> # Instantiating module "updated" from file
>> /etc/freeradius/mods-enabled/always
>> # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
>> # Linked to sub-module rlm_eap_md5
>> # Linked to sub-module rlm_eap_leap
>> # Linked to sub-module rlm_eap_gtc
>> gtc {
>> challenge = "Password: "
>> auth_type = "PAP"
>> }
>> # Linked to sub-module rlm_eap_tls
>> tls {
>> tls = "tls-common"
>> }
>> tls-config tls-common {
>> verify_depth = 0
>> ca_path = "/etc/freeradius/certs"
>> pem_file_type = yes
>> private_key_file = "/etc/freeradius/certs/server.pem"
>> certificate_file = "/etc/freeradius/certs/server.pem"
>> ca_file = "/etc/freeradius/certs/ca.pem"
>> private_key_password = <<< secret >>>
>> dh_file = "/etc/freeradius/certs/dh"
>> random_file = "/dev/urandom"
>> fragment_size = 1024
>> include_length = yes
>> auto_chain = yes
>> check_crl = no
>> check_all_crl = no
>> cipher_list = "DEFAULT"
>> ecdh_curve = "prime256v1"
>> cache {
>> enable = yes
>> lifetime = 24
>> max_entries = 255
>> }
>> verify {
>> skip_if_ocsp_ok = no
>> }
>> ocsp {
>> enable = no
>> override_cert_url = yes
>> url = "http://127.0.0.1/ocsp/"
>> use_nonce = yes
>> timeout = 0
>> softfail = no
>> }
>> }
>> # Linked to sub-module rlm_eap_ttls
>> ttls {
>> tls = "tls-common"
>> default_eap_type = "md5"
>> copy_request_to_tunnel = no
>> use_tunneled_reply = yes
>> virtual_server = "inner-tunnel"
>> include_length = yes
>> require_client_cert = no
>> }
>> tls: Using cached TLS configuration from previous invocation
>> # Linked to sub-module rlm_eap_peap
>> peap {
>> tls = "tls-common"
>> default_eap_type = "mschapv2"
>> copy_request_to_tunnel = no
>> use_tunneled_reply = yes
>> proxy_tunneled_request_as_eap = yes
>> virtual_server = "inner-tunnel"
>> soh = no
>> require_client_cert = no
>> }
>> tls: Using cached TLS configuration from previous invocation
>> # Linked to sub-module rlm_eap_mschapv2
>> mschapv2 {
>> with_ntdomain_hack = no
>> send_error = no
>> }
>> # Instantiating module "logintime" from file
>> /etc/freeradius/mods-enabled/logintime
>> # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/r
>> ealm
>> # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/r
>> ealm
>> # Instantiating module "realmpercent" from file
>> /etc/freeradius/mods-enabled/realm
>> # Instantiating module "ntdomain" from file
>> /etc/freeradius/mods-enabled/realm
>> # Instantiating module "auth_log" from file
>> /etc/freeradius/mods-enabled/detail.log
>> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
>> detail output
>> # Instantiating module "reply_log" from file
>> /etc/freeradius/mods-enabled/detail.log
>> # Instantiating module "pre_proxy_log" from file
>> /etc/freeradius/mods-enabled/detail.log
>> # Instantiating module "post_proxy_log" from file
>> /etc/freeradius/mods-enabled/detail.log
>> # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
>> # Instantiating module "ldap" from file /etc/freeradius/mods-enabled/l
>> dap
>> accounting {
>> reference = "%{tolower:type.%{Acct-Status-Type}}"
>> }
>> post-auth {
>> reference = "."
>> }
>> rlm_ldap (ldap): Initialising connection pool
>> pool {
>> start = 5
>> min = 3
>> max = 32
>> spare = 10
>> uses = 0
>> lifetime = 0
>> cleanup_interval = 30
>> idle_timeout = 60
>> retry_delay = 30
>> spread = no
>> }
>> rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots
>> used
>> rlm_ldap (ldap): Connecting to ldap://localhost:389
>> rlm_ldap (ldap): Waiting for bind result...
>> rlm_ldap (ldap): Bind successful
>> rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots
>> used
>> rlm_ldap (ldap): Connecting to ldap://localhost:389
>> rlm_ldap (ldap): Waiting for bind result...
>> rlm_ldap (ldap): Bind successful
>> rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots
>> used
>> rlm_ldap (ldap): Connecting to ldap://localhost:389
>> rlm_ldap (ldap): Waiting for bind result...
>> rlm_ldap (ldap): Bind successful
>> rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots
>> used
>> rlm_ldap (ldap): Connecting to ldap://localhost:389
>> rlm_ldap (ldap): Waiting for bind result...
>> rlm_ldap (ldap): Bind successful
>> rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots
>> used
>> rlm_ldap (ldap): Connecting to ldap://localhost:389
>> rlm_ldap (ldap): Waiting for bind result...
>> rlm_ldap (ldap): Bind successful
>> # Instantiating module "files" from file /etc/freeradius/mods-enabled/f
>> iles
>> reading pairlist file /etc/freeradius/mods-config/files/authorize
>> reading pairlist file /etc/freeradius/mods-config/files/accounting
>> reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
>> # Instantiating module "preprocess" from file
>> /etc/freeradius/mods-enabled/preprocess
>> reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
>> reading pairlist file /etc/freeradius/mods-config/preprocess/hints
>> # Instantiating module "cache_eap" from file
>> /etc/freeradius/mods-enabled/cache_eap
>> rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
>> loaded and linked
>> # Instantiating module "detail" from file /etc/freeradius/mods-enabled/d
>> etail
>> # Instantiating module "expiration" from file
>> /etc/freeradius/mods-enabled/expiration
>> # Instantiating module "etc_passwd" from file
>> /etc/freeradius/mods-enabled/passwd
>> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
>> # Instantiating module "linelog" from file
>> /etc/freeradius/mods-enabled/linelog
>> # Instantiating module "log_accounting" from file
>> /etc/freeradius/mods-enabled/linelog
>> # Instantiating module "attr_filter.post-proxy" from file
>> /etc/freeradius/mods-enabled/attr_filter
>> reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
>> # Instantiating module "attr_filter.pre-proxy" from file
>> /etc/freeradius/mods-enabled/attr_filter
>> reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
>> # Instantiating module "attr_filter.access_reject" from file
>> /etc/freeradius/mods-enabled/attr_filter
>> reading pairlist file /etc/freeradius/mods-config/at
>> tr_filter/access_reject
>> [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item
>> "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
>> [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item
>> "FreeRADIUS-Response-Delay-USec" found in filter list for realm
>> "DEFAULT".
>> # Instantiating module "attr_filter.access_challenge" from file
>> /etc/freeradius/mods-enabled/attr_filter
>> reading pairlist file /etc/freeradius/mods-config/at
>> tr_filter/access_challenge
>> # Instantiating module "attr_filter.accounting_response" from file
>> /etc/freeradius/mods-enabled/attr_filter
>> reading pairlist file /etc/freeradius/mods-config/at
>> tr_filter/accounting_response
>> } # modules
>> radiusd: #### Loading Virtual Servers ####
>> server { # from file /etc/freeradius/radiusd.conf
>> } # server
>> server inner-tunnel { # from file /etc/freeradius/sites-enabled/
>> inner-tunnel
>> # Loading authenticate {...}
>> # Loading authorize {...}
>> # Loading session {...}
>> # Loading post-proxy {...}
>> # Loading post-auth {...}
>> Ignoring "sql" (see raddb/mods-available/README.rst)
>> } # server inner-tunnel
>> server default { # from file /etc/freeradius/sites-enabled/default
>> # Loading authenticate {...}
>> # Loading authorize {...}
>> # Loading preacct {...}
>> # Loading accounting {...}
>> # Loading post-proxy {...}
>> # Loading post-auth {...}
>> } # server default
>> radiusd: #### Opening IP addresses and Ports ####
>> listen {
>> type = "auth"
>> ipaddr = 127.0.0.1
>> port = 18120
>> }
>> listen {
>> type = "auth"
>> ipaddr = *
>> port = 0
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> listen {
>> type = "acct"
>> ipaddr = *
>> port = 0
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> listen {
>> type = "auth"
>> ipv6addr = ::
>> port = 0
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> listen {
>> type = "acct"
>> ipv6addr = ::
>> port = 0
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> Listening on auth address 127.0.0.1 port 18120 bound to server
>> inner-tunnel
>> Listening on auth address * port 1812 bound to server default
>> Listening on acct address * port 1813 bound to server default
>> Listening on auth address :: port 1812 bound to server default
>> Listening on acct address :: port 1813 bound to server default
>> Listening on proxy address * port 44686
>> Listening on proxy address :: port 35128
>> Ready to process requests
>> (0) Received Access-Request Id 190 from 192.168.100.116:34201 to
>> 192.168.100.201:1812 length 183
>> (0) User-Name = "bchristopher848"
>> (0) NAS-Identifier = "802aa849cbcc"
>> (0) NAS-Port = 0
>> (0) Called-Station-Id = "82-2A-A8-4B-CB-CC:SeminaryWiFi"
>> (0) Calling-Station-Id = "00-27-10-E5-64-54"
>> (0) Framed-MTU = 1400
>> (0) NAS-Port-Type = Wireless-802.11
>> (0) Connect-Info = "CONNECT 0Mbps 802.11b"
>> (0) EAP-Message = 0x0266001401626368726973746f70686572383438
>> (0) Message-Authenticator = 0x2a728f1a24d32cea77dc2d9d9f017331
>> (0) # Executing section authorize from file /etc/freeradius/sites-enabled/
>> default
>> (0) authorize {
>> (0) policy filter_username {
>> (0) if (&User-Name) {
>> (0) if (&User-Name) -> TRUE
>> (0) if (&User-Name) {
>> (0) if (&User-Name =~ /@[^@]*@/ ) {
>> (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>> (0) if (&User-Name =~ /\.\./ ) {
>> (0) if (&User-Name =~ /\.\./ ) -> FALSE
>> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
>> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>> -> FALSE
>> (0) if (&User-Name =~ /\.$/) {
>> (0) if (&User-Name =~ /\.$/) -> FALSE
>> (0) if (&User-Name =~ /@\./) {
>> (0) if (&User-Name =~ /@\./) -> FALSE
>> (0) } # if (&User-Name) = notfound
>> (0) } # policy filter_username = notfound
>> (0) [preprocess] = ok
>> (0) [chap] = noop
>> (0) [mschap] = noop
>> (0) suffix: Checking for suffix after "@"
>> (0) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
>> (0) suffix: No such realm "NULL"
>> (0) [suffix] = noop
>> (0) eap: Peer sent EAP Response (code 2) ID 102 length 20
>> (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
>> rest of authorize
>> (0) [eap] = ok
>> (0) } # authorize = ok
>> (0) Found Auth-Type = eap
>> (0) # Executing group from file /etc/freeradius/sites-enabled/default
>> (0) authenticate {
>> (0) eap: Peer sent packet with method EAP Identity (1)
>> (0) eap: Calling submodule eap_ttls to process data
>> (0) eap_ttls: Initiating new EAP-TLS session
>> (0) eap_ttls: Flushing SSL sessions (of #0)
>> (0) eap_ttls: [eaptls start] = request
>> (0) eap: Sending EAP Request (code 1) ID 103 length 6
>> (0) eap: EAP session adding &reply:State = 0x11d6614f11b1743b
>> (0) [eap] = handled
>> (0) } # authenticate = handled
>> (0) Using Post-Auth-Type Challenge
>> (0) Post-Auth-Type sub-section not found. Ignoring.
>> (0) # Executing group from file /etc/freeradius/sites-enabled/default
>> (0) Sent Access-Challenge Id 190 from 192.168.100.201:1812 to
>> 192.168.100.116:34201 length 0
>> (0) EAP-Message = 0x016700061520
>> (0) Message-Authenticator = 0x00000000000000000000000000000000
>> (0) State = 0x11d6614f11b1743baa2bd1cfb9605e94
>> (0) Finished request
>> Waking up in 4.9 seconds.
>> (1) Received Access-Request Id 191 from 192.168.100.116:34201 to
>> 192.168.100.201:1812 length 354
>> (1) User-Name = "bchristopher848"
>> (1) NAS-Identifier = "802aa849cbcc"
>> (1) NAS-Port = 0
>> (1) Called-Station-Id = "82-2A-A8-4B-CB-CC:SeminaryWiFi"
>> (1) Calling-Station-Id = "00-27-10-E5-64-54"
>> (1) Framed-MTU = 1400
>> (1) NAS-Port-Type = Wireless-802.11
>> (1) Connect-Info = "CONNECT 0Mbps 802.11b"
>> (1) EAP-Message = 0x026700ad1580000000a316030300
>> 9e0100009a030359a994948e437d623a34ec035fc295a43ba4337953de93
>> 26c51f0cbc2c96a74100003cc02cc02bc030c02f009f009ec024c023c028
>> c027c00ac009c014c01300390033009d009c003d003c0035002f000a006a
>> 004000380032001300050004010000
>> (1) State = 0x11d6614f11b1743baa2bd1cfb9605e94
>> (1) Message-Authenticator = 0x409d00c92623a9d2496d8e625a33718b
>> (1) session-state: No cached attributes
>> (1) # Executing section authorize from file /etc/freeradius/sites-enabled/
>> default
>> (1) authorize {
>> (1) policy filter_username {
>> (1) if (&User-Name) {
>> (1) if (&User-Name) -> TRUE
>> (1) if (&User-Name) {
>> (1) if (&User-Name =~ /@[^@]*@/ ) {
>> (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>> (1) if (&User-Name =~ /\.\./ ) {
>> (1) if (&User-Name =~ /\.\./ ) -> FALSE
>> (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
>> (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>> -> FALSE
>> (1) if (&User-Name =~ /\.$/) {
>> (1) if (&User-Name =~ /\.$/) -> FALSE
>> (1) if (&User-Name =~ /@\./) {
>> (1) if (&User-Name =~ /@\./) -> FALSE
>> (1) } # if (&User-Name) = notfound
>> (1) } # policy filter_username = notfound
>> (1) [preprocess] = ok
>> (1) [chap] = noop
>> (1) [mschap] = noop
>> (1) suffix: Checking for suffix after "@"
>> (1) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
>> (1) suffix: No such realm "NULL"
>> (1) [suffix] = noop
>> (1) eap: Peer sent EAP Response (code 2) ID 103 length 173
>> (1) eap: Continuing tunnel setup
>> (1) [eap] = ok
>> (1) } # authorize = ok
>> (1) Found Auth-Type = eap
>> (1) # Executing group from file /etc/freeradius/sites-enabled/default
>> (1) authenticate {
>> (1) eap: Expiring EAP session with state 0x11d6614f11b1743b
>> (1) eap: Finished EAP session with state 0x11d6614f11b1743b
>> (1) eap: Previous EAP request found for state 0x11d6614f11b1743b,
>> released from the list
>> (1) eap: Peer sent packet with method EAP TTLS (21)
>> (1) eap: Calling submodule eap_ttls to process data
>> (1) eap_ttls: Authenticate
>> (1) eap_ttls: Continuing EAP-TLS
>> (1) eap_ttls: Peer indicated complete TLS record size will be 163 bytes
>> (1) eap_ttls: Got complete TLS record (163 bytes)
>> (1) eap_ttls: [eaptls verify] = length included
>> (1) eap_ttls: (other): before/accept initialization
>> (1) eap_ttls: TLS_accept: before/accept initialization
>> (1) eap_ttls: <<< recv TLS 1.2 [length 009e]
>> (1) eap_ttls: TLS_accept: unknown state
>> (1) eap_ttls: >>> send TLS 1.2 [length 0059]
>> (1) eap_ttls: TLS_accept: unknown state
>> (1) eap_ttls: >>> send TLS 1.2 [length 0973]
>> (1) eap_ttls: TLS_accept: unknown state
>> (1) eap_ttls: >>> send TLS 1.2 [length 014d]
>> (1) eap_ttls: TLS_accept: unknown state
>> (1) eap_ttls: >>> send TLS 1.2 [length 0004]
>> (1) eap_ttls: TLS_accept: unknown state
>> (1) eap_ttls: TLS_accept: unknown state
>> (1) eap_ttls: TLS_accept: unknown state
>> (1) eap_ttls: TLS_accept: Need to read more data: unknown state
>> (1) eap_ttls: TLS_accept: Need to read more data: unknown state
>> (1) eap_ttls: In SSL Handshake Phase
>> (1) eap_ttls: In SSL Accept mode
>> (1) eap_ttls: [eaptls process] = handled
>> (1) eap: Sending EAP Request (code 1) ID 104 length 1004
>> (1) eap: EAP session adding &reply:State = 0x11d6614f10be743b
>> (1) [eap] = handled
>> (1) } # authenticate = handled
>> (1) Using Post-Auth-Type Challenge
>> (1) Post-Auth-Type sub-section not found. Ignoring.
>> (1) # Executing group from file /etc/freeradius/sites-enabled/default
>> (1) Sent Access-Challenge Id 191 from 192.168.100.201:1812 to
>> 192.168.100.116:34201 length 0
>> (1) EAP-Message = 0x016803ec15c000000b3116030300
>> 590200005503037ec58d6e953195ea79a136a43d12ae0547748ac9df478e
>> 9380d97c3f1e68bf15204fd6e99e3954109cb3492a1640667842663be6cc
>> 569f92bd33f6af2a503a31a8c03000000dff01000100000b000403000102
>> 16030309730b00096f00096c000420
>> (1) Message-Authenticator = 0x00000000000000000000000000000000
>> (1) State = 0x11d6614f10be743baa2bd1cfb9605e94
>> (1) Finished request
>> Waking up in 4.9 seconds.
>> (2) Received Access-Request Id 192 from 192.168.100.116:34201 to
>> 192.168.100.201:1812 length 187
>> (2) User-Name = "bchristopher848"
>> (2) NAS-Identifier = "802aa849cbcc"
>> (2) NAS-Port = 0
>> (2) Called-Station-Id = "82-2A-A8-4B-CB-CC:SeminaryWiFi"
>> (2) Calling-Station-Id = "00-27-10-E5-64-54"
>> (2) Framed-MTU = 1400
>> (2) NAS-Port-Type = Wireless-802.11
>> (2) Connect-Info = "CONNECT 0Mbps 802.11b"
>> (2) EAP-Message = 0x026800061500
>> (2) State = 0x11d6614f10be743baa2bd1cfb9605e94
>> (2) Message-Authenticator = 0x43171522907443e6dcf2adaa8cb2c5e0
>> (2) session-state: No cached attributes
>> (2) # Executing section authorize from file /etc/freeradius/sites-enabled/
>> default
>> (2) authorize {
>> (2) policy filter_username {
>> (2) if (&User-Name) {
>> (2) if (&User-Name) -> TRUE
>> (2) if (&User-Name) {
>> (2) if (&User-Name =~ /@[^@]*@/ ) {
>> (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>> (2) if (&User-Name =~ /\.\./ ) {
>> (2) if (&User-Name =~ /\.\./ ) -> FALSE
>> (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
>> (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>> -> FALSE
>> (2) if (&User-Name =~ /\.$/) {
>> (2) if (&User-Name =~ /\.$/) -> FALSE
>> (2) if (&User-Name =~ /@\./) {
>> (2) if (&User-Name =~ /@\./) -> FALSE
>> (2) } # if (&User-Name) = notfound
>> (2) } # policy filter_username = notfound
>> (2) [preprocess] = ok
>> (2) [chap] = noop
>> (2) [mschap] = noop
>> (2) suffix: Checking for suffix after "@"
>> (2) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
>> (2) suffix: No such realm "NULL"
>> (2) [suffix] = noop
>> (2) eap: Peer sent EAP Response (code 2) ID 104 length 6
>> (2) eap: Continuing tunnel setup
>> (2) [eap] = ok
>> (2) } # authorize = ok
>> (2) Found Auth-Type = eap
>> (2) # Executing group from file /etc/freeradius/sites-enabled/default
>> (2) authenticate {
>> (2) eap: Expiring EAP session with state 0x11d6614f10be743b
>> (2) eap: Finished EAP session with state 0x11d6614f10be743b
>> (2) eap: Previous EAP request found for state 0x11d6614f10be743b,
>> released from the list
>> (2) eap: Peer sent packet with method EAP TTLS (21)
>> (2) eap: Calling submodule eap_ttls to process data
>> (2) eap_ttls: Authenticate
>> (2) eap_ttls: Continuing EAP-TLS
>> (2) eap_ttls: Peer ACKed our handshake fragment
>> (2) eap_ttls: [eaptls verify] = request
>> (2) eap_ttls: [eaptls process] = handled
>> (2) eap: Sending EAP Request (code 1) ID 105 length 1004
>> (2) eap: EAP session adding &reply:State = 0x11d6614f13bf743b
>> (2) [eap] = handled
>> (2) } # authenticate = handled
>> (2) Using Post-Auth-Type Challenge
>> (2) Post-Auth-Type sub-section not found. Ignoring.
>> (2) # Executing group from file /etc/freeradius/sites-enabled/default
>> (2) Sent Access-Challenge Id 192 from 192.168.100.201:1812 to
>> 192.168.100.116:34201 length 0
>> (2) EAP-Message = 0x016903ec15c000000b31b3d95dd2
>> ed6bc14f8008ac4ccb42e7eb0200a8d70b9a3d9e451cf4e0f645302d933d
>> 25af330480c89609c676a8b21f5463d0d83293c3d96e1f52034ec62a147f
>> 95d27b9a6f34ab0a97a3b7a366601166a86c0409ece2b9ddc79831d2c39f
>> 79903774d273ae6afca66797b43da5
>> (2) Message-Authenticator = 0x00000000000000000000000000000000
>> (2) State = 0x11d6614f13bf743baa2bd1cfb9605e94
>> (2) Finished request
>> Waking up in 4.9 seconds.
>> (3) Received Access-Request Id 193 from 192.168.100.116:34201 to
>> 192.168.100.201:1812 length 187
>> (3) User-Name = "bchristopher848"
>> (3) NAS-Identifier = "802aa849cbcc"
>> (3) NAS-Port = 0
>> (3) Called-Station-Id = "82-2A-A8-4B-CB-CC:SeminaryWiFi"
>> (3) Calling-Station-Id = "00-27-10-E5-64-54"
>> (3) Framed-MTU = 1400
>> (3) NAS-Port-Type = Wireless-802.11
>> (3) Connect-Info = "CONNECT 0Mbps 802.11b"
>> (3) EAP-Message = 0x026900061500
>> (3) State = 0x11d6614f13bf743baa2bd1cfb9605e94
>> (3) Message-Authenticator = 0xf33adc8e8dfa4888a100c9fd41e1f9c6
>> (3) session-state: No cached attributes
>> (3) # Executing section authorize from file /etc/freeradius/sites-enabled/
>> default
>> (3) authorize {
>> (3) policy filter_username {
>> (3) if (&User-Name) {
>> (3) if (&User-Name) -> TRUE
>> (3) if (&User-Name) {
>> (3) if (&User-Name =~ /@[^@]*@/ ) {
>> (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>> (3) if (&User-Name =~ /\.\./ ) {
>> (3) if (&User-Name =~ /\.\./ ) -> FALSE
>> (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
>> (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>> -> FALSE
>> (3) if (&User-Name =~ /\.$/) {
>> (3) if (&User-Name =~ /\.$/) -> FALSE
>> (3) if (&User-Name =~ /@\./) {
>> (3) if (&User-Name =~ /@\./) -> FALSE
>> (3) } # if (&User-Name) = notfound
>> (3) } # policy filter_username = notfound
>> (3) [preprocess] = ok
>> (3) [chap] = noop
>> (3) [mschap] = noop
>> (3) suffix: Checking for suffix after "@"
>> (3) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
>> (3) suffix: No such realm "NULL"
>> (3) [suffix] = noop
>> (3) eap: Peer sent EAP Response (code 2) ID 105 length 6
>> (3) eap: Continuing tunnel setup
>> (3) [eap] = ok
>> (3) } # authorize = ok
>> (3) Found Auth-Type = eap
>> (3) # Executing group from file /etc/freeradius/sites-enabled/default
>> (3) authenticate {
>> (3) eap: Expiring EAP session with state 0x11d6614f13bf743b
>> (3) eap: Finished EAP session with state 0x11d6614f13bf743b
>> (3) eap: Previous EAP request found for state 0x11d6614f13bf743b,
>> released from the list
>> (3) eap: Peer sent packet with method EAP TTLS (21)
>> (3) eap: Calling submodule eap_ttls to process data
>> (3) eap_ttls: Authenticate
>> (3) eap_ttls: Continuing EAP-TLS
>> (3) eap_ttls: Peer ACKed our handshake fragment
>> (3) eap_ttls: [eaptls verify] = request
>> (3) eap_ttls: [eaptls process] = handled
>> (3) eap: Sending EAP Request (code 1) ID 106 length 887
>> (3) eap: EAP session adding &reply:State = 0x11d6614f12bc743b
>> (3) [eap] = handled
>> (3) } # authenticate = handled
>> (3) Using Post-Auth-Type Challenge
>> (3) Post-Auth-Type sub-section not found. Ignoring.
>> (3) # Executing group from file /etc/freeradius/sites-enabled/default
>> (3) Sent Access-Challenge Id 193 from 192.168.100.201:1812 to
>> 192.168.100.116:34201 length 0
>> (3) EAP-Message = 0x016a0377158000000b3113024d54
>> 310e300c06035504080c0552616261743112301006035504070c0954616c
>> 2d566972747531223020060355040a0c195468652041726368626973686f
>> 70732053656d696e6172792e3128302606092a864886f70d010901161974
>> 6563686e6963616c4073656d696e61
>> (3) Message-Authenticator = 0x00000000000000000000000000000000
>> (3) State = 0x11d6614f12bc743baa2bd1cfb9605e94
>> (3) Finished request
>> Waking up in 4.9 seconds.
>> (4) Received Access-Request Id 194 from 192.168.100.116:34201 to
>> 192.168.100.201:1812 length 317
>> (4) User-Name = "bchristopher848"
>> (4) NAS-Identifier = "802aa849cbcc"
>> (4) NAS-Port = 0
>> (4) Called-Station-Id = "82-2A-A8-4B-CB-CC:SeminaryWiFi"
>> (4) Calling-Station-Id = "00-27-10-E5-64-54"
>> (4) Framed-MTU = 1400
>> (4) NAS-Port-Type = Wireless-802.11
>> (4) Connect-Info = "CONNECT 0Mbps 802.11b"
>> (4) EAP-Message = 0x026a008815800000007e16030300
>> 4610000042410422802ad6fa84d5ac992b0eb0d4d1ea431c57969729544b
>> 483fd946c56ab608f57286a72323bfd1fc2720ab956a69dd74127d5edb2c
>> e9c9134ba42cc04042791214030300010116030300280000000000000000
>> 931e23c09c86d05144ab76c2b4a187
>> (4) State = 0x11d6614f12bc743baa2bd1cfb9605e94
>> (4) Message-Authenticator = 0xa7f11fa855a3baa3fe0c81e0a9cd89ef
>> (4) session-state: No cached attributes
>> (4) # Executing section authorize from file /etc/freeradius/sites-enabled/
>> default
>> (4) authorize {
>> (4) policy filter_username {
>> (4) if (&User-Name) {
>> (4) if (&User-Name) -> TRUE
>> (4) if (&User-Name) {
>> (4) if (&User-Name =~ /@[^@]*@/ ) {
>> (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>> (4) if (&User-Name =~ /\.\./ ) {
>> (4) if (&User-Name =~ /\.\./ ) -> FALSE
>> (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
>> (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>> -> FALSE
>> (4) if (&User-Name =~ /\.$/) {
>> (4) if (&User-Name =~ /\.$/) -> FALSE
>> (4) if (&User-Name =~ /@\./) {
>> (4) if (&User-Name =~ /@\./) -> FALSE
>> (4) } # if (&User-Name) = notfound
>> (4) } # policy filter_username = notfound
>> (4) [preprocess] = ok
>> (4) [chap] = noop
>> (4) [mschap] = noop
>> (4) suffix: Checking for suffix after "@"
>> (4) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
>> (4) suffix: No such realm "NULL"
>> (4) [suffix] = noop
>> (4) eap: Peer sent EAP Response (code 2) ID 106 length 136
>> (4) eap: Continuing tunnel setup
>> (4) [eap] = ok
>> (4) } # authorize = ok
>> (4) Found Auth-Type = eap
>> (4) # Executing group from file /etc/freeradius/sites-enabled/default
>> (4) authenticate {
>> (4) eap: Expiring EAP session with state 0x11d6614f12bc743b
>> (4) eap: Finished EAP session with state 0x11d6614f12bc743b
>> (4) eap: Previous EAP request found for state 0x11d6614f12bc743b,
>> released from the list
>> (4) eap: Peer sent packet with method EAP TTLS (21)
>> (4) eap: Calling submodule eap_ttls to process data
>> (4) eap_ttls: Authenticate
>> (4) eap_ttls: Continuing EAP-TLS
>> (4) eap_ttls: Peer indicated complete TLS record size will be 126 bytes
>> (4) eap_ttls: Got complete TLS record (126 bytes)
>> (4) eap_ttls: [eaptls verify] = length included
>> (4) eap_ttls: <<< recv TLS 1.2 [length 0046]
>> (4) eap_ttls: TLS_accept: unknown state
>> (4) eap_ttls: TLS_accept: unknown state
>> (4) eap_ttls: <<< recv TLS 1.2 [length 0001]
>> (4) eap_ttls: <<< recv TLS 1.2 [length 0010]
>> (4) eap_ttls: TLS_accept: unknown state
>> (4) eap_ttls: >>> send TLS 1.2 [length 0001]
>> (4) eap_ttls: TLS_accept: unknown state
>> (4) eap_ttls: >>> send TLS 1.2 [length 0010]
>> (4) eap_ttls: TLS_accept: unknown state
>> (4) eap_ttls: TLS_accept: unknown state
>> (4) eap_ttls: (other): SSL negotiation finished successfully
>> (4) eap_ttls: SSL Connection Established
>> (4) eap_ttls: [eaptls process] = handled
>> (4) eap: Sending EAP Request (code 1) ID 107 length 61
>> (4) eap: EAP session adding &reply:State = 0x11d6614f15bd743b
>> (4) [eap] = handled
>> (4) } # authenticate = handled
>> (4) Using Post-Auth-Type Challenge
>> (4) Post-Auth-Type sub-section not found. Ignoring.
>> (4) # Executing group from file /etc/freeradius/sites-enabled/default
>> (4) Sent Access-Challenge Id 194 from 192.168.100.201:1812 to
>> 192.168.100.116:34201 length 0
>> (4) EAP-Message = 0x016b003d15800000003314030300
>> 0101160303002846f2bdbd4e3a5070b7581cc10130c36dfec89071bcc2e5
>> e14a65ffe690ae1ba4cbce11f94d6dc8be
>> (4) Message-Authenticator = 0x00000000000000000000000000000000
>> (4) State = 0x11d6614f15bd743baa2bd1cfb9605e94
>> (4) Finished request
>> Waking up in 4.9 seconds.
>> (0) Cleaning up request packet ID 190 with timestamp +37
>> (1) Cleaning up request packet ID 191 with timestamp +37
>> (2) Cleaning up request packet ID 192 with timestamp +37
>> (3) Cleaning up request packet ID 193 with timestamp +37
>> (4) Cleaning up request packet ID 194 with timestamp +37
>> Ready to process requests
>>
>>
>>
>>
>> Matthew Pulis
>> mobile / WhatsApp: +356 79539404 <+356%207953%209404>
>>
>> On 31 August 2017 at 20:58, Matthew Pulis <mpulis at gmail.com> wrote:
>>
>>> Hi
>>>
>>> My Windows clients (Win 7 and Win 10) cannot authenticate with
>>> Freeradius due to this error:
>>>
>>> routines:ssl3_read_bytes:tlsv1 alert unknown ca
>>>
>>> I have searched a bit around and seems to be a problem with the CA
>>> certification of the server. Is that correct?
>>>
>>> As far as I remember last year it was working, but now that I restarted
>>> the project and am planning to finalise it, we are getting this error.
>>> Maybe something happened in Windows environment - for example some update?
>>>
>>> NB: Window clients are NOT Domain clients.
>>>
>>> The APs are Unifi.
>>>
>>> Android and iPhone clients connect without any problems.
>>>
>>> Testing using radtest works fine too, as you can see in the log
>>>
>>> I haven't touched Freeradius these past 12 months and I forgot what I
>>> did, so please try to be verbose with your answers - thanks beforehand for
>>> the patience and support.
>>>
>>> The lines marked red in the debug are the below:
>>>
>>> (21) eap_peap: Continuing EAP-TLS
>>> (21) eap_peap: Peer indicated complete TLS record size will be 7 bytes
>>> (21) eap_peap: Got complete TLS record (7 bytes)
>>> (21) eap_peap: [eaptls verify] = length included
>>> (21) eap_peap: <<< recv TLS 1.0 Alert [length 0002], fatal unknown_ca
>>> (21) eap_peap: ERROR: TLS Alert read:fatal:unknown CA
>>> (21) eap_peap: ERROR: TLS_accept: Failed in unknown state
>>> (21) eap_peap: ERROR: Failed in __FUNCTION__ (SSL_read)
>>> (21) eap_peap: ERROR: error:14094418:SSL routines:ssl3_read_bytes:tlsv1
>>> alert unknown ca
>>> (21) eap_peap: ERROR: error:140940E5:SSL routines:ssl3_read_bytes:ssl
>>> handshake failure
>>> (21) eap_peap: ERROR: System call (I/O) error (-1)
>>> (21) eap_peap: ERROR: TLS receive handshake failed during operation
>>> (21) eap_peap: ERROR: [eaptls process] = fail
>>> (21) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP
>>> sub-module failed
>>> (21) eap: Sending EAP Failure (code 4) ID 216 length 4
>>>
>>>
>>> The full log is here:
>>>
>>> (WARNING 1700 lines)
>>>
>>> radius at radius:~$ freeradius -X
>>> FreeRADIUS Version 3.0.15
>>> Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
>>> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
>>> PARTICULAR PURPOSE
>>> You may redistribute copies of FreeRADIUS under the terms of the
>>> GNU General Public License
>>> For more information about these matters, see the file named COPYRIGHT
>>> Starting - reading configuration files ...
>>> including dictionary file /usr/share/freeradius/dictionary
>>> including dictionary file /usr/share/freeradius/dictionary.dhcp
>>> including dictionary file /usr/share/freeradius/dictionary.vqp
>>> including dictionary file /etc/freeradius/dictionary
>>> including configuration file /etc/freeradius/radiusd.conf
>>> Unable to open file "/etc/freeradius/radiusd.conf": Permission denied
>>> Errors reading or parsing /etc/freeradius/radiusd.conf
>>> radius at radius:~$ sudo freeradius -X
>>> FreeRADIUS Version 3.0.15
>>> Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
>>> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
>>> PARTICULAR PURPOSE
>>> You may redistribute copies of FreeRADIUS under the terms of the
>>> GNU General Public License
>>> For more information about these matters, see the file named COPYRIGHT
>>> Starting - reading configuration files ...
>>> including dictionary file /usr/share/freeradius/dictionary
>>> including dictionary file /usr/share/freeradius/dictionary.dhcp
>>> including dictionary file /usr/share/freeradius/dictionary.vqp
>>> including dictionary file /etc/freeradius/dictionary
>>> including configuration file /etc/freeradius/radiusd.conf
>>> including configuration file /etc/freeradius/proxy.conf
>>> including configuration file /etc/freeradius/clients.conf
>>> including files in directory /etc/freeradius/mods-enabled/
>>> including configuration file /etc/freeradius/mods-enabled/mschap
>>> including configuration file /etc/freeradius/mods-enabled/adldap
>>> including configuration file /etc/freeradius/mods-enabled/always
>>> including configuration file /etc/freeradius/mods-enabled/soh
>>> including configuration file /etc/freeradius/mods-enabled/eap
>>> including configuration file /etc/freeradius/mods-enabled/d
>>> ynamic_clients
>>> including configuration file /etc/freeradius/mods-enabled/logintime
>>> including configuration file /etc/freeradius/mods-enabled/exec
>>> including configuration file /etc/freeradius/mods-enabled/realm
>>> including configuration file /etc/freeradius/mods-enabled/utf8
>>> including configuration file /etc/freeradius/mods-enabled/date
>>> including configuration file /etc/freeradius/mods-enabled/echo
>>> including configuration file /etc/freeradius/mods-enabled/unix
>>> including configuration file /etc/freeradius/mods-enabled/detail.log
>>> including configuration file /etc/freeradius/mods-enabled/expr
>>> including configuration file /etc/freeradius/mods-enabled/ntlm_auth
>>> including configuration file /etc/freeradius/mods-enabled/pap
>>> including configuration file /etc/freeradius/mods-enabled/ldap
>>> including configuration file /etc/freeradius/mods-enabled/digest
>>> including configuration file /etc/freeradius/mods-enabled/files
>>> including configuration file /etc/freeradius/mods-enabled/preprocess
>>> including configuration file /etc/freeradius/mods-enabled/cache_eap
>>> including configuration file /etc/freeradius/mods-enabled/detail
>>> including configuration file /etc/freeradius/mods-enabled/expiration
>>> including configuration file /etc/freeradius/mods-enabled/chap
>>> including configuration file /etc/freeradius/mods-enabled/sradutmp
>>> including configuration file /etc/freeradius/mods-enabled/radutmp
>>> including configuration file /etc/freeradius/mods-enabled/passwd
>>> including configuration file /etc/freeradius/mods-enabled/linelog
>>> including configuration file /etc/freeradius/mods-enabled/unpack
>>> including configuration file /etc/freeradius/mods-enabled/attr_filter
>>> including configuration file /etc/freeradius/mods-enabled/replicate
>>> including files in directory /etc/freeradius/policy.d/
>>> including configuration file /etc/freeradius/policy.d/filter
>>> including configuration file /etc/freeradius/policy.d/control
>>> including configuration file /etc/freeradius/policy.d/canonicalization
>>> including configuration file /etc/freeradius/policy.d/eap
>>> including configuration file /etc/freeradius/policy.d/debug
>>> including configuration file /etc/freeradius/policy.d/dhcp
>>> including configuration file /etc/freeradius/policy.d/moons
>>> hot-targeted-ids
>>> including configuration file /etc/freeradius/policy.d/accounting
>>> including configuration file /etc/freeradius/policy.d/abfab-tr
>>> including configuration file /etc/freeradius/policy.d/cui
>>> including configuration file /etc/freeradius/policy.d/operator-name
>>> including files in directory /etc/freeradius/sites-enabled/
>>> including configuration file /etc/freeradius/sites-enabled/inner-tunnel
>>> including configuration file /etc/freeradius/sites-enabled/default
>>> main {
>>> security {
>>> user = "freerad"
>>> group = "freerad"
>>> allow_core_dumps = no
>>> }
>>> name = "freeradius"
>>> prefix = "/usr"
>>> localstatedir = "/var"
>>> logdir = "/var/log/freeradius"
>>> run_dir = "/var/run/freeradius"
>>> }
>>> main {
>>> name = "freeradius"
>>> prefix = "/usr"
>>> localstatedir = "/var"
>>> sbindir = "/usr/sbin"
>>> logdir = "/var/log/freeradius"
>>> run_dir = "/var/run/freeradius"
>>> libdir = "/usr/lib/freeradius"
>>> radacctdir = "/var/log/freeradius/radacct"
>>> hostname_lookups = no
>>> max_request_time = 30
>>> cleanup_delay = 5
>>> max_requests = 16384
>>> pidfile = "/var/run/freeradius/freeradius.pid"
>>> checkrad = "/usr/sbin/checkrad"
>>> debug_level = 0
>>> proxy_requests = yes
>>> log {
>>> stripped_names = no
>>> auth = no
>>> auth_badpass = no
>>> auth_goodpass = no
>>> colourise = yes
>>> msg_denied = "You are already logged in - access denied"
>>> }
>>> resources {
>>> }
>>> security {
>>> max_attributes = 200
>>> reject_delay = 1.000000
>>> status_server = yes
>>> }
>>> }
>>> radiusd: #### Loading Realms and Home Servers ####
>>> proxy server {
>>> retry_delay = 5
>>> retry_count = 3
>>> default_fallback = no
>>> dead_time = 120
>>> wake_all_if_all_dead = no
>>> }
>>> home_server localhost {
>>> ipaddr = 127.0.0.1
>>> port = 1812
>>> type = "auth"
>>> secret = <<< secret >>>
>>> response_window = 20.000000
>>> response_timeouts = 1
>>> max_outstanding = 65536
>>> zombie_period = 40
>>> status_check = "status-server"
>>> ping_interval = 30
>>> check_interval = 30
>>> check_timeout = 4
>>> num_answers_to_alive = 3
>>> revive_interval = 120
>>> limit {
>>> max_connections = 16
>>> max_requests = 0
>>> lifetime = 0
>>> idle_timeout = 0
>>> }
>>> coa {
>>> irt = 2
>>> mrt = 16
>>> mrc = 5
>>> mrd = 30
>>> }
>>> }
>>> home_server_pool my_auth_failover {
>>> type = fail-over
>>> home_server = localhost
>>> }
>>> realm example.com {
>>> auth_pool = my_auth_failover
>>> }
>>> realm LOCAL {
>>> }
>>> radiusd: #### Loading Clients ####
>>> client localhost {
>>> ipaddr = 127.0.0.1
>>> require_message_authenticator = no
>>> secret = <<< secret >>>
>>> nas_type = "other"
>>> proto = "*"
>>> limit {
>>> max_connections = 16
>>> lifetime = 0
>>> idle_timeout = 30
>>> }
>>> }
>>> client localhost_ipv6 {
>>> ipv6addr = ::1
>>> require_message_authenticator = no
>>> secret = <<< secret >>>
>>> limit {
>>> max_connections = 16
>>> lifetime = 0
>>> idle_timeout = 30
>>> }
>>> }
>>> client 192.168.100.1/24 {
>>> require_message_authenticator = no
>>> secret = <<< secret >>>
>>> shortname = "NAS"
>>> limit {
>>> max_connections = 16
>>> lifetime = 0
>>> idle_timeout = 30
>>> }
>>> }
>>> No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
>>> 192.168.100.1/24. Please fix your configuration
>>> Support for old-style clients will be removed in a future release
>>> Debugger not attached
>>> # Creating Auth-Type = eap
>>> # Creating Auth-Type = PAP
>>> # Creating Auth-Type = CHAP
>>> # Creating Auth-Type = MS-CHAP
>>> # Creating Auth-Type = digest
>>> radiusd: #### Instantiating modules ####
>>> modules {
>>> # Loaded module rlm_mschap
>>> # Loading module "mschap" from file /etc/freeradius/mods-enabled/m
>>> schap
>>> mschap {
>>> use_mppe = yes
>>> require_encryption = no
>>> require_strong = no
>>> with_ntdomain_hack = yes
>>> passchange {
>>> }
>>> allow_retry = yes
>>> winbind_retry_with_normalised_username = no
>>> }
>>> # Loaded module rlm_ldap
>>> # Loading module "adldap" from file /etc/freeradius/mods-enabled/a
>>> dldap
>>> ldap adldap {
>>> server = "localhost"
>>> identity = "cn=admin,dc=seminary,dc=local"
>>> password = <<< secret >>>
>>> sasl {
>>> }
>>> user {
>>> scope = "sub"
>>> access_positive = yes
>>> sasl {
>>> }
>>> }
>>> group {
>>> filter = "(objectClass=posixGroup)"
>>> scope = "sub"
>>> name_attribute = "cn"
>>> membership_attribute = "memberOf"
>>> cacheable_name = no
>>> cacheable_dn = no
>>> }
>>> client {
>>> filter = "(objectClass=radiusClient)"
>>> scope = "sub"
>>> base_dn = "ou=School,dc=seminary,dc=ad"
>>> }
>>> profile {
>>> }
>>> options {
>>> ldap_debug = 40
>>> chase_referrals = yes
>>> rebind = yes
>>> net_timeout = 1
>>> res_timeout = 10
>>> srv_timelimit = 3
>>> idle = 60
>>> probes = 3
>>> interval = 3
>>> }
>>> tls {
>>> start_tls = no
>>> }
>>> }
>>> Creating attribute adldap-LDAP-Group
>>> # Loaded module rlm_always
>>> # Loading module "reject" from file /etc/freeradius/mods-enabled/a
>>> lways
>>> always reject {
>>> rcode = "reject"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loading module "fail" from file /etc/freeradius/mods-enabled/always
>>> always fail {
>>> rcode = "fail"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loading module "ok" from file /etc/freeradius/mods-enabled/always
>>> always ok {
>>> rcode = "ok"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loading module "handled" from file /etc/freeradius/mods-enabled/a
>>> lways
>>> always handled {
>>> rcode = "handled"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loading module "invalid" from file /etc/freeradius/mods-enabled/a
>>> lways
>>> always invalid {
>>> rcode = "invalid"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loading module "userlock" from file /etc/freeradius/mods-enabled/a
>>> lways
>>> always userlock {
>>> rcode = "userlock"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loading module "notfound" from file /etc/freeradius/mods-enabled/a
>>> lways
>>> always notfound {
>>> rcode = "notfound"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loading module "noop" from file /etc/freeradius/mods-enabled/always
>>> always noop {
>>> rcode = "noop"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loading module "updated" from file /etc/freeradius/mods-enabled/a
>>> lways
>>> always updated {
>>> rcode = "updated"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loaded module rlm_soh
>>> # Loading module "soh" from file /etc/freeradius/mods-enabled/soh
>>> soh {
>>> dhcp = yes
>>> }
>>> # Loaded module rlm_eap
>>> # Loading module "eap" from file /etc/freeradius/mods-enabled/eap
>>> eap {
>>> default_eap_type = "ttls"
>>> timer_expire = 60
>>> ignore_unknown_eap_types = no
>>> cisco_accounting_username_bug = no
>>> max_sessions = 16384
>>> }
>>> # Loaded module rlm_dynamic_clients
>>> # Loading module "dynamic_clients" from file
>>> /etc/freeradius/mods-enabled/dynamic_clients
>>> # Loaded module rlm_logintime
>>> # Loading module "logintime" from file /etc/freeradius/mods-enabled/l
>>> ogintime
>>> logintime {
>>> minimum_timeout = 60
>>> }
>>> # Loaded module rlm_exec
>>> # Loading module "exec" from file /etc/freeradius/mods-enabled/exec
>>> exec {
>>> wait = no
>>> input_pairs = "request"
>>> shell_escape = yes
>>> timeout = 10
>>> }
>>> # Loaded module rlm_realm
>>> # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
>>> realm IPASS {
>>> format = "prefix"
>>> delimiter = "/"
>>> ignore_default = no
>>> ignore_null = no
>>> }
>>> # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
>>> realm suffix {
>>> format = "suffix"
>>> delimiter = "@"
>>> ignore_default = no
>>> ignore_null = no
>>> }
>>> # Loading module "realmpercent" from file
>>> /etc/freeradius/mods-enabled/realm
>>> realm realmpercent {
>>> format = "suffix"
>>> delimiter = "%"
>>> ignore_default = no
>>> ignore_null = no
>>> }
>>> # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/r
>>> ealm
>>> realm ntdomain {
>>> format = "prefix"
>>> delimiter = "\\"
>>> ignore_default = no
>>> ignore_null = no
>>> }
>>> # Loaded module rlm_utf8
>>> # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
>>> # Loaded module rlm_date
>>> # Loading module "date" from file /etc/freeradius/mods-enabled/date
>>> date {
>>> format = "%b %e %Y %H:%M:%S %Z"
>>> utc = no
>>> }
>>> # Loading module "echo" from file /etc/freeradius/mods-enabled/echo
>>> exec echo {
>>> wait = yes
>>> program = "/bin/echo %{User-Name}"
>>> input_pairs = "request"
>>> output_pairs = "reply"
>>> shell_escape = yes
>>> }
>>> # Loaded module rlm_unix
>>> # Loading module "unix" from file /etc/freeradius/mods-enabled/unix
>>> unix {
>>> radwtmp = "/var/log/freeradius/radwtmp"
>>> }
>>> Creating attribute Unix-Group
>>> # Loaded module rlm_detail
>>> # Loading module "auth_log" from file /etc/freeradius/mods-enabled/d
>>> etail.log
>>> detail auth_log {
>>> filename = "/var/log/freeradius/radacct/%
>>> {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-
>>> detail-%Y%m%d"
>>> header = "%t"
>>> permissions = 384
>>> locking = no
>>> escape_filenames = no
>>> log_packet_header = no
>>> }
>>> # Loading module "reply_log" from file /etc/freeradius/mods-enabled/d
>>> etail.log
>>> detail reply_log {
>>> filename = "/var/log/freeradius/radacct/%
>>> {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply
>>> -detail-%Y%m%d"
>>> header = "%t"
>>> permissions = 384
>>> locking = no
>>> escape_filenames = no
>>> log_packet_header = no
>>> }
>>> # Loading module "pre_proxy_log" from file
>>> /etc/freeradius/mods-enabled/detail.log
>>> detail pre_proxy_log {
>>> filename = "/var/log/freeradius/radacct/%
>>> {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-p
>>> roxy-detail-%Y%m%d"
>>> header = "%t"
>>> permissions = 384
>>> locking = no
>>> escape_filenames = no
>>> log_packet_header = no
>>> }
>>> # Loading module "post_proxy_log" from file
>>> /etc/freeradius/mods-enabled/detail.log
>>> detail post_proxy_log {
>>> filename = "/var/log/freeradius/radacct/%
>>> {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-
>>> proxy-detail-%Y%m%d"
>>> header = "%t"
>>> permissions = 384
>>> locking = no
>>> escape_filenames = no
>>> log_packet_header = no
>>> }
>>> # Loaded module rlm_expr
>>> # Loading module "expr" from file /etc/freeradius/mods-enabled/expr
>>> expr {
>>> safe_characters = "@abcdefghijklmnopqrstuvwxyzAB
>>> CDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆ
>>> ÇÈÉÊËÎÏÔŒÙÛÜŸ"
>>> }
>>> # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/n
>>> tlm_auth
>>> exec ntlm_auth {
>>> wait = yes
>>> program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
>>> --username=%{mschap:User-Name} --password=%{User-Password}"
>>> shell_escape = yes
>>> }
>>> # Loaded module rlm_pap
>>> # Loading module "pap" from file /etc/freeradius/mods-enabled/pap
>>> pap {
>>> normalise = yes
>>> }
>>> # Loading module "ldap" from file /etc/freeradius/mods-enabled/ldap
>>> ldap {
>>> server = "localhost"
>>> identity = "cn=admin,dc=seminary,dc=local"
>>> password = <<< secret >>>
>>> sasl {
>>> }
>>> user {
>>> scope = "sub"
>>> access_positive = yes
>>> sasl {
>>> }
>>> }
>>> group {
>>> filter = "(objectClass=posixGroup)"
>>> scope = "sub"
>>> name_attribute = "cn"
>>> membership_attribute = "memberOf"
>>> cacheable_name = no
>>> cacheable_dn = no
>>> }
>>> client {
>>> filter = "(objectClass=radiusClient)"
>>> scope = "sub"
>>> base_dn = "ou=SeminaryOU,dc=seminary,dc=local"
>>> }
>>> profile {
>>> }
>>> options {
>>> ldap_debug = 40
>>> chase_referrals = yes
>>> rebind = yes
>>> net_timeout = 1
>>> res_timeout = 10
>>> srv_timelimit = 3
>>> idle = 60
>>> probes = 3
>>> interval = 3
>>> }
>>> tls {
>>> start_tls = no
>>> }
>>> }
>>> Creating attribute LDAP-Group
>>> # Loaded module rlm_digest
>>> # Loading module "digest" from file /etc/freeradius/mods-enabled/d
>>> igest
>>> # Loaded module rlm_files
>>> # Loading module "files" from file /etc/freeradius/mods-enabled/files
>>> files {
>>> filename = "/etc/freeradius/mods-config/files/authorize"
>>> acctusersfile = "/etc/freeradius/mods-config/files/accounting"
>>> preproxy_usersfile = "/etc/freeradius/mods-config/f
>>> iles/pre-proxy"
>>> }
>>> # Loaded module rlm_preprocess
>>> # Loading module "preprocess" from file /etc/freeradius/mods-enabled/p
>>> reprocess
>>> preprocess {
>>> huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
>>> hints = "/etc/freeradius/mods-config/preprocess/hints"
>>> with_ascend_hack = no
>>> ascend_channels_per_line = 23
>>> with_ntdomain_hack = no
>>> with_specialix_jetstream_hack = no
>>> with_cisco_vsa_hack = no
>>> with_alvarion_vsa_hack = no
>>> }
>>> # Loaded module rlm_cache
>>> # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/c
>>> ache_eap
>>> cache cache_eap {
>>> driver = "rlm_cache_rbtree"
>>> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
>>> ttl = 15
>>> max_entries = 0
>>> epoch = 0
>>> add_stats = no
>>> }
>>> # Loading module "detail" from file /etc/freeradius/mods-enabled/d
>>> etail
>>> detail {
>>> filename = "/var/log/freeradius/radacct/%
>>> {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
>>> header = "%t"
>>> permissions = 384
>>> locking = no
>>> escape_filenames = no
>>> log_packet_header = no
>>> }
>>> # Loaded module rlm_expiration
>>> # Loading module "expiration" from file /etc/freeradius/mods-enabled/e
>>> xpiration
>>> # Loaded module rlm_chap
>>> # Loading module "chap" from file /etc/freeradius/mods-enabled/chap
>>> # Loaded module rlm_radutmp
>>> # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/s
>>> radutmp
>>> radutmp sradutmp {
>>> filename = "/var/log/freeradius/sradutmp"
>>> username = "%{User-Name}"
>>> case_sensitive = yes
>>> check_with_nas = yes
>>> permissions = 420
>>> caller_id = no
>>> }
>>> # Loading module "radutmp" from file /etc/freeradius/mods-enabled/r
>>> adutmp
>>> radutmp {
>>> filename = "/var/log/freeradius/radutmp"
>>> username = "%{User-Name}"
>>> case_sensitive = yes
>>> check_with_nas = yes
>>> permissions = 384
>>> caller_id = yes
>>> }
>>> # Loaded module rlm_passwd
>>> # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/p
>>> asswd
>>> passwd etc_passwd {
>>> filename = "/etc/passwd"
>>> format = "*User-Name:Crypt-Password:"
>>> delimiter = ":"
>>> ignore_nislike = no
>>> ignore_empty = yes
>>> allow_multiple_keys = no
>>> hash_size = 100
>>> }
>>> # Loaded module rlm_linelog
>>> # Loading module "linelog" from file /etc/freeradius/mods-enabled/l
>>> inelog
>>> linelog {
>>> filename = "/var/log/freeradius/linelog"
>>> escape_filenames = no
>>> syslog_severity = "info"
>>> permissions = 384
>>> format = "This is a log message for %{User-Name}"
>>> reference = "messages.%{%{reply:Packet-Type}:-default}"
>>> }
>>> # Loading module "log_accounting" from file
>>> /etc/freeradius/mods-enabled/linelog
>>> linelog log_accounting {
>>> filename = "/var/log/freeradius/linelog-accounting"
>>> escape_filenames = no
>>> syslog_severity = "info"
>>> permissions = 384
>>> format = ""
>>> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
>>> }
>>> # Loaded module rlm_unpack
>>> # Loading module "unpack" from file /etc/freeradius/mods-enabled/u
>>> npack
>>> # Loaded module rlm_attr_filter
>>> # Loading module "attr_filter.post-proxy" from file
>>> /etc/freeradius/mods-enabled/attr_filter
>>> attr_filter attr_filter.post-proxy {
>>> filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
>>> key = "%{Realm}"
>>> relaxed = no
>>> }
>>> # Loading module "attr_filter.pre-proxy" from file
>>> /etc/freeradius/mods-enabled/attr_filter
>>> attr_filter attr_filter.pre-proxy {
>>> filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
>>> key = "%{Realm}"
>>> relaxed = no
>>> }
>>> # Loading module "attr_filter.access_reject
>>>
>> ...
More information about the Freeradius-Users
mailing list