Windows cannot authenticate with Freeradius
Matthew Pulis
mpulis at gmail.com
Wed Sep 6 10:09:00 CEST 2017
Resending since the other one was rejected for being long. Apologies
On 5 September 2017 at 22:19, Matthew Pulis <mpulis at gmail.com> wrote:
> Dear all
>
> Many many thanks for your support. We are moving towards a complete
> solution :)
>
> Windows 10 works fine without the need to install a certificate. The
> certificates on the server were all expired so I renewed everything and Win
> 10 worked out of the box - no need to install anything.
>
> Windows 7 is different. I pushed ca.der to the Win 7 client. Installed it
> using cert util and double checked it via mmc.
>
> Before connecting this is the warning the network showed: The server "The
> Seminary Local Certificate Authority" presented a valid certificate issued
> by "The Seminary Local Certificate Authority", but "The Seminary Local
> Certificate Authority" is not configured as a valid trust anchor for this
> profile. Further, the server "The Seminary Local Certificate Authority" is
> not configured as a valid NPS server to connect to for this profile.
>
> It seems to be a problem with Win 7. Do you have any pointers? Should I
> enable MSCHAPv2 too? or is there something for EAP please?
>
> Should something like this work: https://documentation.
> meraki.com/MR/Encryption_and_Authentication/Enabling_EAP-TLS_in_Windows_7?
>
> Thanks a lot for your help and support!
>
> This is the full log
>
> radius at radius:~$ sudo freeradius -X
> FreeRADIUS Version 3.0.15
> Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE
> You may redistribute copies of FreeRADIUS under the terms of the
> GNU General Public License
> For more information about these matters, see the file named COPYRIGHT
> Starting - reading configuration files ...
> including dictionary file /usr/share/freeradius/dictionary
> including dictionary file /usr/share/freeradius/dictionary.dhcp
> including dictionary file /usr/share/freeradius/dictionary.vqp
> including dictionary file /etc/freeradius/dictionary
> including configuration file /etc/freeradius/radiusd.conf
> including configuration file /etc/freeradius/proxy.conf
> including configuration file /etc/freeradius/clients.conf
> including files in directory /etc/freeradius/mods-enabled/
> including configuration file /etc/freeradius/mods-enabled/mschap
> including configuration file /etc/freeradius/mods-enabled/adldap
> including configuration file /etc/freeradius/mods-enabled/always
> including configuration file /etc/freeradius/mods-enabled/soh
> including configuration file /etc/freeradius/mods-enabled/eap
> including configuration file /etc/freeradius/mods-enabled/dynamic_clients
> including configuration file /etc/freeradius/mods-enabled/logintime
> including configuration file /etc/freeradius/mods-enabled/exec
> including configuration file /etc/freeradius/mods-enabled/realm
> including configuration file /etc/freeradius/mods-enabled/utf8
> including configuration file /etc/freeradius/mods-enabled/date
> including configuration file /etc/freeradius/mods-enabled/echo
> including configuration file /etc/freeradius/mods-enabled/unix
> including configuration file /etc/freeradius/mods-enabled/detail.log
> including configuration file /etc/freeradius/mods-enabled/expr
> including configuration file /etc/freeradius/mods-enabled/ntlm_auth
> including configuration file /etc/freeradius/mods-enabled/pap
> including configuration file /etc/freeradius/mods-enabled/ldap
> including configuration file /etc/freeradius/mods-enabled/digest
> including configuration file /etc/freeradius/mods-enabled/files
> including configuration file /etc/freeradius/mods-enabled/preprocess
> including configuration file /etc/freeradius/mods-enabled/cache_eap
> including configuration file /etc/freeradius/mods-enabled/detail
> including configuration file /etc/freeradius/mods-enabled/expiration
> including configuration file /etc/freeradius/mods-enabled/chap
> including configuration file /etc/freeradius/mods-enabled/sradutmp
> including configuration file /etc/freeradius/mods-enabled/radutmp
> including configuration file /etc/freeradius/mods-enabled/passwd
> including configuration file /etc/freeradius/mods-enabled/linelog
> including configuration file /etc/freeradius/mods-enabled/unpack
> including configuration file /etc/freeradius/mods-enabled/attr_filter
> including configuration file /etc/freeradius/mods-enabled/replicate
> including files in directory /etc/freeradius/policy.d/
> including configuration file /etc/freeradius/policy.d/filter
> including configuration file /etc/freeradius/policy.d/control
> including configuration file /etc/freeradius/policy.d/canonicalization
> including configuration file /etc/freeradius/policy.d/eap
> including configuration file /etc/freeradius/policy.d/debug
> including configuration file /etc/freeradius/policy.d/dhcp
> including configuration file /etc/freeradius/policy.d/
> moonshot-targeted-ids
> including configuration file /etc/freeradius/policy.d/accounting
> including configuration file /etc/freeradius/policy.d/abfab-tr
> including configuration file /etc/freeradius/policy.d/cui
> including configuration file /etc/freeradius/policy.d/operator-name
> including files in directory /etc/freeradius/sites-enabled/
> including configuration file /etc/freeradius/sites-enabled/inner-tunnel
> including configuration file /etc/freeradius/sites-enabled/default
> main {
> security {
> user = "freerad"
> group = "freerad"
> allow_core_dumps = no
> }
> name = "freeradius"
> prefix = "/usr"
> localstatedir = "/var"
> logdir = "/var/log/freeradius"
> run_dir = "/var/run/freeradius"
> }
> main {
> name = "freeradius"
> prefix = "/usr"
> localstatedir = "/var"
> sbindir = "/usr/sbin"
> logdir = "/var/log/freeradius"
> run_dir = "/var/run/freeradius"
> libdir = "/usr/lib/freeradius"
> radacctdir = "/var/log/freeradius/radacct"
> hostname_lookups = no
> max_request_time = 30
> cleanup_delay = 5
> max_requests = 16384
> pidfile = "/var/run/freeradius/freeradius.pid"
> checkrad = "/usr/sbin/checkrad"
> debug_level = 0
> proxy_requests = yes
> log {
> stripped_names = no
> auth = no
> auth_badpass = no
> auth_goodpass = no
> colourise = yes
> msg_denied = "You are already logged in - access denied"
> }
> resources {
> }
> security {
> max_attributes = 200
> reject_delay = 1.000000
> status_server = yes
> }
> }
> radiusd: #### Loading Realms and Home Servers ####
> proxy server {
> retry_delay = 5
> retry_count = 3
> default_fallback = no
> dead_time = 120
> wake_all_if_all_dead = no
> }
> home_server localhost {
> ipaddr = 127.0.0.1
> port = 1812
> type = "auth"
> secret = <<< secret >>>
> response_window = 20.000000
> response_timeouts = 1
> max_outstanding = 65536
> zombie_period = 40
> status_check = "status-server"
> ping_interval = 30
> check_interval = 30
> check_timeout = 4
> num_answers_to_alive = 3
> revive_interval = 120
> limit {
> max_connections = 16
> max_requests = 0
> lifetime = 0
> idle_timeout = 0
> }
> coa {
> irt = 2
> mrt = 16
> mrc = 5
> mrd = 30
> }
> }
> home_server_pool my_auth_failover {
> type = fail-over
> home_server = localhost
> }
> realm example.com {
> auth_pool = my_auth_failover
> }
> realm LOCAL {
> }
> radiusd: #### Loading Clients ####
> client localhost {
> ipaddr = 127.0.0.1
> require_message_authenticator = no
> secret = <<< secret >>>
> nas_type = "other"
> proto = "*"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> client localhost_ipv6 {
> ipv6addr = ::1
> require_message_authenticator = no
> secret = <<< secret >>>
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> client 192.168.100.1/24 {
> require_message_authenticator = no
> secret = <<< secret >>>
> shortname = "NAS"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
> 192.168.100.1/24. Please fix your configuration
> Support for old-style clients will be removed in a future release
> Debugger not attached
> # Creating Auth-Type = eap
> # Creating Auth-Type = PAP
> # Creating Auth-Type = CHAP
> # Creating Auth-Type = MS-CHAP
> # Creating Auth-Type = digest
> radiusd: #### Instantiating modules ####
> modules {
> # Loaded module rlm_mschap
> # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
> mschap {
> use_mppe = yes
> require_encryption = no
> require_strong = no
> with_ntdomain_hack = yes
> passchange {
> }
> allow_retry = yes
> winbind_retry_with_normalised_username = no
> }
> # Loaded module rlm_ldap
> # Loading module "adldap" from file /etc/freeradius/mods-enabled/adldap
> ldap adldap {
> server = "localhost"
> identity = "cn=admin,dc=seminary,dc=local"
> password = <<< secret >>>
> sasl {
> }
> user {
> scope = "sub"
> access_positive = yes
> sasl {
> }
> }
> group {
> filter = "(objectClass=posixGroup)"
> scope = "sub"
> name_attribute = "cn"
> membership_attribute = "memberOf"
> cacheable_name = no
> cacheable_dn = no
> }
> client {
> filter = "(objectClass=radiusClient)"
> scope = "sub"
> base_dn = "ou=School,dc=seminary,dc=ad"
> }
> profile {
> }
> options {
> ldap_debug = 40
> chase_referrals = yes
> rebind = yes
> net_timeout = 1
> res_timeout = 10
> srv_timelimit = 3
> idle = 60
> probes = 3
> interval = 3
> }
> tls {
> start_tls = no
> }
> }
> Creating attribute adldap-LDAP-Group
> # Loaded module rlm_always
> # Loading module "reject" from file /etc/freeradius/mods-enabled/always
> always reject {
> rcode = "reject"
> simulcount = 0
> mpp = no
> }
> # Loading module "fail" from file /etc/freeradius/mods-enabled/always
> always fail {
> rcode = "fail"
> simulcount = 0
> mpp = no
> }
> # Loading module "ok" from file /etc/freeradius/mods-enabled/always
> always ok {
> rcode = "ok"
> simulcount = 0
> mpp = no
> }
> # Loading module "handled" from file /etc/freeradius/mods-enabled/always
> always handled {
> rcode = "handled"
> simulcount = 0
> mpp = no
> }
> # Loading module "invalid" from file /etc/freeradius/mods-enabled/always
> always invalid {
> rcode = "invalid"
> simulcount = 0
> mpp = no
> }
> # Loading module "userlock" from file /etc/freeradius/mods-enabled/
> always
> always userlock {
> rcode = "userlock"
> simulcount = 0
> mpp = no
> }
> # Loading module "notfound" from file /etc/freeradius/mods-enabled/
> always
> always notfound {
> rcode = "notfound"
> simulcount = 0
> mpp = no
> }
> # Loading module "noop" from file /etc/freeradius/mods-enabled/always
> always noop {
> rcode = "noop"
> simulcount = 0
> mpp = no
> }
> # Loading module "updated" from file /etc/freeradius/mods-enabled/always
> always updated {
> rcode = "updated"
> simulcount = 0
> mpp = no
> }
> # Loaded module rlm_soh
> # Loading module "soh" from file /etc/freeradius/mods-enabled/soh
> soh {
> dhcp = yes
> }
> # Loaded module rlm_eap
> # Loading module "eap" from file /etc/freeradius/mods-enabled/eap
> eap {
> default_eap_type = "ttls"
> timer_expire = 60
> ignore_unknown_eap_types = no
> cisco_accounting_username_bug = no
> max_sessions = 16384
> }
> # Loaded module rlm_dynamic_clients
> # Loading module "dynamic_clients" from file
> /etc/freeradius/mods-enabled/dynamic_clients
> # Loaded module rlm_logintime
> # Loading module "logintime" from file /etc/freeradius/mods-enabled/
> logintime
> logintime {
> minimum_timeout = 60
> }
> # Loaded module rlm_exec
> # Loading module "exec" from file /etc/freeradius/mods-enabled/exec
> exec {
> wait = no
> input_pairs = "request"
> shell_escape = yes
> timeout = 10
> }
> # Loaded module rlm_realm
> # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
> realm IPASS {
> format = "prefix"
> delimiter = "/"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
> realm suffix {
> format = "suffix"
> delimiter = "@"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/
> realm
> realm realmpercent {
> format = "suffix"
> delimiter = "%"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
> realm ntdomain {
> format = "prefix"
> delimiter = "\\"
> ignore_default = no
> ignore_null = no
> }
> # Loaded module rlm_utf8
> # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
> # Loaded module rlm_date
> # Loading module "date" from file /etc/freeradius/mods-enabled/date
> date {
> format = "%b %e %Y %H:%M:%S %Z"
> utc = no
> }
> # Loading module "echo" from file /etc/freeradius/mods-enabled/echo
> exec echo {
> wait = yes
> program = "/bin/echo %{User-Name}"
> input_pairs = "request"
> output_pairs = "reply"
> shell_escape = yes
> }
> # Loaded module rlm_unix
> # Loading module "unix" from file /etc/freeradius/mods-enabled/unix
> unix {
> radwtmp = "/var/log/freeradius/radwtmp"
> }
> Creating attribute Unix-Group
> # Loaded module rlm_detail
> # Loading module "auth_log" from file /etc/freeradius/mods-enabled/
> detail.log
> detail auth_log {
> filename = "/var/log/freeradius/radacct/%
> {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "reply_log" from file /etc/freeradius/mods-enabled/
> detail.log
> detail reply_log {
> filename = "/var/log/freeradius/radacct/%
> {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/
> reply-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/
> detail.log
> detail pre_proxy_log {
> filename = "/var/log/freeradius/radacct/%
> {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-
> proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/
> detail.log
> detail post_proxy_log {
> filename = "/var/log/freeradius/radacct/%
> {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/
> post-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loaded module rlm_expr
> # Loading module "expr" from file /etc/freeradius/mods-enabled/expr
> expr {
> safe_characters = "@abcdefghijklmnopqrstuvwxyzABCD
> EFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇ
> ÈÉÊËÎÏÔŒÙÛÜŸ"
> }
> # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/
> ntlm_auth
> exec ntlm_auth {
> wait = yes
> program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
> --username=%{mschap:User-Name} --password=%{User-Password}"
> shell_escape = yes
> }
> # Loaded module rlm_pap
> # Loading module "pap" from file /etc/freeradius/mods-enabled/pap
> pap {
> normalise = yes
> }
> # Loading module "ldap" from file /etc/freeradius/mods-enabled/ldap
> ldap {
> server = "localhost"
> identity = "cn=admin,dc=seminary,dc=local"
> password = <<< secret >>>
> sasl {
> }
> user {
> scope = "sub"
> access_positive = yes
> sasl {
> }
> }
> group {
> filter = "(objectClass=posixGroup)"
> scope = "sub"
> name_attribute = "cn"
> membership_attribute = "memberOf"
> cacheable_name = no
> cacheable_dn = no
> }
> client {
> filter = "(objectClass=radiusClient)"
> scope = "sub"
> base_dn = "ou=SeminaryOU,dc=seminary,dc=local"
> }
> profile {
> }
> options {
> ldap_debug = 40
> chase_referrals = yes
> rebind = yes
> net_timeout = 1
> res_timeout = 10
> srv_timelimit = 3
> idle = 60
> probes = 3
> interval = 3
> }
> tls {
> start_tls = no
> }
> }
> Creating attribute LDAP-Group
> # Loaded module rlm_digest
> # Loading module "digest" from file /etc/freeradius/mods-enabled/digest
> # Loaded module rlm_files
> # Loading module "files" from file /etc/freeradius/mods-enabled/files
> files {
> filename = "/etc/freeradius/mods-config/files/authorize"
> acctusersfile = "/etc/freeradius/mods-config/files/accounting"
> preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
> }
> # Loaded module rlm_preprocess
> # Loading module "preprocess" from file /etc/freeradius/mods-enabled/
> preprocess
> preprocess {
> huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
> hints = "/etc/freeradius/mods-config/preprocess/hints"
> with_ascend_hack = no
> ascend_channels_per_line = 23
> with_ntdomain_hack = no
> with_specialix_jetstream_hack = no
> with_cisco_vsa_hack = no
> with_alvarion_vsa_hack = no
> }
> # Loaded module rlm_cache
> # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/
> cache_eap
> cache cache_eap {
> driver = "rlm_cache_rbtree"
> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
> ttl = 15
> max_entries = 0
> epoch = 0
> add_stats = no
> }
> # Loading module "detail" from file /etc/freeradius/mods-enabled/detail
> detail {
> filename = "/var/log/freeradius/radacct/%
> {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loaded module rlm_expiration
> # Loading module "expiration" from file /etc/freeradius/mods-enabled/
> expiration
> # Loaded module rlm_chap
> # Loading module "chap" from file /etc/freeradius/mods-enabled/chap
> # Loaded module rlm_radutmp
> # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/
> sradutmp
> radutmp sradutmp {
> filename = "/var/log/freeradius/sradutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 420
> caller_id = no
> }
> # Loading module "radutmp" from file /etc/freeradius/mods-enabled/
> radutmp
> radutmp {
> filename = "/var/log/freeradius/radutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 384
> caller_id = yes
> }
> # Loaded module rlm_passwd
> # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/
> passwd
> passwd etc_passwd {
> filename = "/etc/passwd"
> format = "*User-Name:Crypt-Password:"
> delimiter = ":"
> ignore_nislike = no
> ignore_empty = yes
> allow_multiple_keys = no
> hash_size = 100
> }
> # Loaded module rlm_linelog
> # Loading module "linelog" from file /etc/freeradius/mods-enabled/
> linelog
> linelog {
> filename = "/var/log/freeradius/linelog"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = "This is a log message for %{User-Name}"
> reference = "messages.%{%{reply:Packet-Type}:-default}"
> }
> # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/
> linelog
> linelog log_accounting {
> filename = "/var/log/freeradius/linelog-accounting"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = ""
> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
> }
> # Loaded module rlm_unpack
> # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
> # Loaded module rlm_attr_filter
> # Loading module "attr_filter.post-proxy" from file
> /etc/freeradius/mods-enabled/attr_filter
> attr_filter attr_filter.post-proxy {
> filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.pre-proxy" from file
> /etc/freeradius/mods-enabled/attr_filter
> attr_filter attr_filter.pre-proxy {
> filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.access_reject" from file
> /etc/freeradius/mods-enabled/attr_filter
> attr_filter attr_filter.access_reject {
> filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.access_challenge" from file
> /etc/freeradius/mods-enabled/attr_filter
> attr_filter attr_filter.access_challenge {
> filename = "/etc/freeradius/mods-config/
> attr_filter/access_challenge"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.accounting_response" from file
> /etc/freeradius/mods-enabled/attr_filter
> attr_filter attr_filter.accounting_response {
> filename = "/etc/freeradius/mods-config/attr_filter/accounting_
> response"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loaded module rlm_replicate
> # Loading module "replicate" from file /etc/freeradius/mods-enabled/
> replicate
> instantiate {
> }
> # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/
> mschap
> rlm_mschap (mschap): using internal authentication
> # Instantiating module "adldap" from file /etc/freeradius/mods-enabled/
> adldap
> rlm_ldap: libldap vendor: OpenLDAP, version: 20442
> accounting {
> reference = "%{tolower:type.%{Acct-Status-Type}}"
> }
> post-auth {
> reference = "."
> }
> rlm_ldap (adldap): Initialising connection pool
> pool {
> start = 5
> min = 3
> max = 32
> spare = 10
> uses = 0
> lifetime = 0
> cleanup_interval = 30
> idle_timeout = 60
> retry_delay = 30
> spread = no
> }
> rlm_ldap (adldap): Opening additional connection (0), 1 of 32 pending
> slots used
> rlm_ldap (adldap): Connecting to ldap://localhost:389
> rlm_ldap (adldap): Waiting for bind result...
> rlm_ldap (adldap): Bind successful
> rlm_ldap (adldap): Opening additional connection (1), 1 of 31 pending
> slots used
> rlm_ldap (adldap): Connecting to ldap://localhost:389
> rlm_ldap (adldap): Waiting for bind result...
> rlm_ldap (adldap): Bind successful
> rlm_ldap (adldap): Opening additional connection (2), 1 of 30 pending
> slots used
> rlm_ldap (adldap): Connecting to ldap://localhost:389
> rlm_ldap (adldap): Waiting for bind result...
> rlm_ldap (adldap): Bind successful
> rlm_ldap (adldap): Opening additional connection (3), 1 of 29 pending
> slots used
> rlm_ldap (adldap): Connecting to ldap://localhost:389
> rlm_ldap (adldap): Waiting for bind result...
> rlm_ldap (adldap): Bind successful
> rlm_ldap (adldap): Opening additional connection (4), 1 of 28 pending
> slots used
> rlm_ldap (adldap): Connecting to ldap://localhost:389
> rlm_ldap (adldap): Waiting for bind result...
> rlm_ldap (adldap): Bind successful
> # Instantiating module "reject" from file /etc/freeradius/mods-enabled/
> always
> # Instantiating module "fail" from file /etc/freeradius/mods-enabled/
> always
> # Instantiating module "ok" from file /etc/freeradius/mods-enabled/
> always
> # Instantiating module "handled" from file /etc/freeradius/mods-enabled/
> always
> # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/
> always
> # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/
> always
> # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/
> always
> # Instantiating module "noop" from file /etc/freeradius/mods-enabled/
> always
> # Instantiating module "updated" from file /etc/freeradius/mods-enabled/
> always
> # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
> # Linked to sub-module rlm_eap_md5
> # Linked to sub-module rlm_eap_leap
> # Linked to sub-module rlm_eap_gtc
> gtc {
> challenge = "Password: "
> auth_type = "PAP"
> }
> # Linked to sub-module rlm_eap_tls
> tls {
> tls = "tls-common"
> }
> tls-config tls-common {
> verify_depth = 0
> ca_path = "/etc/freeradius/certs"
> pem_file_type = yes
> private_key_file = "/etc/freeradius/certs/server.pem"
> certificate_file = "/etc/freeradius/certs/server.pem"
> ca_file = "/etc/freeradius/certs/ca.pem"
> private_key_password = <<< secret >>>
> dh_file = "/etc/freeradius/certs/dh"
> random_file = "/dev/urandom"
> fragment_size = 1024
> include_length = yes
> auto_chain = yes
> check_crl = no
> check_all_crl = no
> cipher_list = "DEFAULT"
> ecdh_curve = "prime256v1"
> cache {
> enable = yes
> lifetime = 24
> max_entries = 255
> }
> verify {
> skip_if_ocsp_ok = no
> }
> ocsp {
> enable = no
> override_cert_url = yes
> url = "http://127.0.0.1/ocsp/"
> use_nonce = yes
> timeout = 0
> softfail = no
> }
> }
> # Linked to sub-module rlm_eap_ttls
> ttls {
> tls = "tls-common"
> default_eap_type = "md5"
> copy_request_to_tunnel = no
> use_tunneled_reply = yes
> virtual_server = "inner-tunnel"
> include_length = yes
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_peap
> peap {
> tls = "tls-common"
> default_eap_type = "mschapv2"
> copy_request_to_tunnel = no
> use_tunneled_reply = yes
> proxy_tunneled_request_as_eap = yes
> virtual_server = "inner-tunnel"
> soh = no
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_mschapv2
> mschapv2 {
> with_ntdomain_hack = no
> send_error = no
> }
> # Instantiating module "logintime" from file
> /etc/freeradius/mods-enabled/logintime
> # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/
> realm
> # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/
> realm
> # Instantiating module "realmpercent" from file
> /etc/freeradius/mods-enabled/realm
> # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/
> realm
> # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/
> detail.log
> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
> detail output
> # Instantiating module "reply_log" from file
> /etc/freeradius/mods-enabled/detail.log
> # Instantiating module "pre_proxy_log" from file
> /etc/freeradius/mods-enabled/detail.log
> # Instantiating module "post_proxy_log" from file
> /etc/freeradius/mods-enabled/detail.log
> # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
> # Instantiating module "ldap" from file /etc/freeradius/mods-enabled/
> ldap
> accounting {
> reference = "%{tolower:type.%{Acct-Status-Type}}"
> }
> post-auth {
> reference = "."
> }
> rlm_ldap (ldap): Initialising connection pool
> pool {
> start = 5
> min = 3
> max = 32
> spare = 10
> uses = 0
> lifetime = 0
> cleanup_interval = 30
> idle_timeout = 60
> retry_delay = 30
> spread = no
> }
> rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://localhost:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://localhost:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://localhost:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://localhost:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://localhost:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> # Instantiating module "files" from file /etc/freeradius/mods-enabled/
> files
> reading pairlist file /etc/freeradius/mods-config/files/authorize
> reading pairlist file /etc/freeradius/mods-config/files/accounting
> reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
> # Instantiating module "preprocess" from file
> /etc/freeradius/mods-enabled/preprocess
> reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
> reading pairlist file /etc/freeradius/mods-config/preprocess/hints
> # Instantiating module "cache_eap" from file
> /etc/freeradius/mods-enabled/cache_eap
> rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
> loaded and linked
> # Instantiating module "detail" from file /etc/freeradius/mods-enabled/
> detail
> # Instantiating module "expiration" from file
> /etc/freeradius/mods-enabled/expiration
> # Instantiating module "etc_passwd" from file
> /etc/freeradius/mods-enabled/passwd
> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/
> linelog
> # Instantiating module "log_accounting" from file
> /etc/freeradius/mods-enabled/linelog
> # Instantiating module "attr_filter.post-proxy" from file
> /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
> # Instantiating module "attr_filter.pre-proxy" from file
> /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
> # Instantiating module "attr_filter.access_reject" from file
> /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/mods-config/
> attr_filter/access_reject
> [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item
> "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
> [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item
> "FreeRADIUS-Response-Delay-USec" found in filter list for realm
> "DEFAULT".
> # Instantiating module "attr_filter.access_challenge" from file
> /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/mods-config/
> attr_filter/access_challenge
> # Instantiating module "attr_filter.accounting_response" from file
> /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_
> response
> } # modules
> radiusd: #### Loading Virtual Servers ####
> server { # from file /etc/freeradius/radiusd.conf
> } # server
> server inner-tunnel { # from file /etc/freeradius/sites-enabled/
> inner-tunnel
> # Loading authenticate {...}
> # Loading authorize {...}
> # Loading session {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> Ignoring "sql" (see raddb/mods-available/README.rst)
> } # server inner-tunnel
> server default { # from file /etc/freeradius/sites-enabled/default
> # Loading authenticate {...}
> # Loading authorize {...}
> # Loading preacct {...}
> # Loading accounting {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> } # server default
> radiusd: #### Opening IP addresses and Ports ####
> listen {
> type = "auth"
> ipaddr = 127.0.0.1
> port = 18120
> }
> listen {
> type = "auth"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "auth"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
> Listening on auth address * port 1812 bound to server default
> Listening on acct address * port 1813 bound to server default
> Listening on auth address :: port 1812 bound to server default
> Listening on acct address :: port 1813 bound to server default
> Listening on proxy address * port 37387
> Listening on proxy address :: port 45616
> Ready to process requests
>
>
>
>
>
>
> TRYING TO LOG IN FROM WINDOWS 7
>
>
>
>
>
>
>
>
>
>
>
>
>
> (0) Received Access-Request Id 1 from 192.168.100.113:34296 to
> 192.168.100.201:1812 length 189
> (0) User-Name = "bchristopher848"
> (0) NAS-IP-Address = 10.0.150.19
> (0) NAS-Identifier = "802aa849d031"
> (0) NAS-Port = 0
> (0) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
> (0) Calling-Station-Id = "00-22-FB-6E-1D-C8"
> (0) Framed-MTU = 1400
> (0) NAS-Port-Type = Wireless-802.11
> (0) Connect-Info = "CONNECT 0Mbps 802.11b"
> (0) EAP-Message = 0x0269001401626368726973746f70686572383438
> (0) Message-Authenticator = 0x60dc6e98028e3f9af87c442e20dbd98b
> (0) # Executing section authorize from file /etc/freeradius/sites-enabled/
> default
> (0) authorize {
> (0) policy filter_username {
> (0) if (&User-Name) {
> (0) if (&User-Name) -> TRUE
> (0) if (&User-Name) {
> (0) if (&User-Name =~ /@[^@]*@/ ) {
> (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (0) if (&User-Name =~ /\.\./ ) {
> (0) if (&User-Name =~ /\.\./ ) -> FALSE
> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (0) if (&User-Name =~ /\.$/) {
> (0) if (&User-Name =~ /\.$/) -> FALSE
> (0) if (&User-Name =~ /@\./) {
> (0) if (&User-Name =~ /@\./) -> FALSE
> (0) } # if (&User-Name) = notfound
> (0) } # policy filter_username = notfound
> (0) [preprocess] = ok
> (0) [chap] = noop
> (0) [mschap] = noop
> (0) suffix: Checking for suffix after "@"
> (0) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
> (0) suffix: No such realm "NULL"
> (0) [suffix] = noop
> (0) eap: Peer sent EAP Response (code 2) ID 105 length 20
> (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
> rest of authorize
> (0) [eap] = ok
> (0) } # authorize = ok
> (0) Found Auth-Type = eap
> (0) # Executing group from file /etc/freeradius/sites-enabled/default
> (0) authenticate {
> (0) eap: Peer sent packet with method EAP Identity (1)
> (0) eap: Calling submodule eap_ttls to process data
> (0) eap_ttls: Initiating new EAP-TLS session
> (0) eap_ttls: Flushing SSL sessions (of #0)
> (0) eap_ttls: [eaptls start] = request
> (0) eap: Sending EAP Request (code 1) ID 106 length 6
> (0) eap: EAP session adding &reply:State = 0xb5449406b52e8100
> (0) [eap] = handled
> (0) } # authenticate = handled
> (0) Using Post-Auth-Type Challenge
> (0) Post-Auth-Type sub-section not found. Ignoring.
> (0) # Executing group from file /etc/freeradius/sites-enabled/default
> (0) Sent Access-Challenge Id 1 from 192.168.100.201:1812 to
> 192.168.100.113:34296 length 0
> (0) EAP-Message = 0x016a00061520
> (0) Message-Authenticator = 0x00000000000000000000000000000000
> (0) State = 0xb5449406b52e81001eb003264d869845
> (0) Finished request
> Waking up in 4.9 seconds.
> (1) Received Access-Request Id 2 from 192.168.100.113:34296 to
> 192.168.100.201:1812 length 193
> (1) User-Name = "bchristopher848"
> (1) NAS-IP-Address = 10.0.150.19
> (1) NAS-Identifier = "802aa849d031"
> (1) NAS-Port = 0
> (1) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
> (1) Calling-Station-Id = "00-22-FB-6E-1D-C8"
> (1) Framed-MTU = 1400
> (1) NAS-Port-Type = Wireless-802.11
> (1) Connect-Info = "CONNECT 0Mbps 802.11b"
> (1) EAP-Message = 0x026a00060319
> (1) State = 0xb5449406b52e81001eb003264d869845
> (1) Message-Authenticator = 0x9229ace477f82c7e771de427669cfad1
> (1) session-state: No cached attributes
> (1) # Executing section authorize from file /etc/freeradius/sites-enabled/
> default
> (1) authorize {
> (1) policy filter_username {
> (1) if (&User-Name) {
> (1) if (&User-Name) -> TRUE
> (1) if (&User-Name) {
> (1) if (&User-Name =~ /@[^@]*@/ ) {
> (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (1) if (&User-Name =~ /\.\./ ) {
> (1) if (&User-Name =~ /\.\./ ) -> FALSE
> (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (1) if (&User-Name =~ /\.$/) {
> (1) if (&User-Name =~ /\.$/) -> FALSE
> (1) if (&User-Name =~ /@\./) {
> (1) if (&User-Name =~ /@\./) -> FALSE
> (1) } # if (&User-Name) = notfound
> (1) } # policy filter_username = notfound
> (1) [preprocess] = ok
> (1) [chap] = noop
> (1) [mschap] = noop
> (1) suffix: Checking for suffix after "@"
> (1) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
> (1) suffix: No such realm "NULL"
> (1) [suffix] = noop
> (1) eap: Peer sent EAP Response (code 2) ID 106 length 6
> (1) eap: No EAP Start, assuming it's an on-going EAP conversation
> (1) [eap] = updated
> (1) [files] = noop
> rlm_ldap (ldap): Reserved connection (0)
> (1) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
> (1) ldap: --> (cn=bchristopher848)
> (1) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with
> filter "(cn=bchristopher848)", scope "sub"
> (1) ldap: Waiting for search result...
> (1) ldap: User object found at DN "cn=bchristopher848,cn=
> Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
> (1) ldap: Processing user attributes
> (1) ldap: control:Password-With-Header += '{ssha}o1fjrtGMqroWxrIgC8G/
> jwK8GK5BxvANe+pK7w=='
> rlm_ldap (ldap): Released connection (0)
> Need 5 more connections to reach 10 spares
> rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://localhost:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> (1) [ldap] = updated
> rlm_ldap (adldap): Reserved connection (0)
> (1) adldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
> (1) adldap: --> (cn=bchristopher848)
> (1) adldap: Performing search in "ou=School,dc=seminary,dc=ad" with filter
> "(cn=bchristopher848)", scope "sub"
> (1) adldap: Waiting for search result...
> (1) adldap: The specified DN wasn't found
> (1) adldap: Search returned no results
> rlm_ldap (adldap): Released connection (0)
> Need 5 more connections to reach 10 spares
> rlm_ldap (adldap): Opening additional connection (5), 1 of 27 pending
> slots used
> rlm_ldap (adldap): Connecting to ldap://localhost:389
> rlm_ldap (adldap): Waiting for bind result...
> rlm_ldap (adldap): Bind successful
> (1) [adldap] = notfound
> (1) [expiration] = noop
> (1) [logintime] = noop
> (1) pap: Converted: &control:Password-With-Header ->
> &control:SSHA1-Password
> (1) pap: Removing &control:Password-With-Header
> (1) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28
> bytes
> (1) pap: WARNING: Auth-Type already set. Not setting to PAP
> (1) [pap] = noop
> (1) } # authorize = updated
> (1) Found Auth-Type = eap
> (1) # Executing group from file /etc/freeradius/sites-enabled/default
> (1) authenticate {
> (1) eap: Expiring EAP session with state 0xb5449406b52e8100
> (1) eap: Finished EAP session with state 0xb5449406b52e8100
> (1) eap: Previous EAP request found for state 0xb5449406b52e8100, released
> from the list
> (1) eap: Peer sent packet with method EAP NAK (3)
> (1) eap: Found mutually acceptable type PEAP (25)
> (1) eap: Calling submodule eap_peap to process data
> (1) eap_peap: Initiating new EAP-TLS session
> (1) eap_peap: [eaptls start] = request
> (1) eap: Sending EAP Request (code 1) ID 107 length 6
> (1) eap: EAP session adding &reply:State = 0xb5449406b42f8d00
> (1) [eap] = handled
> (1) } # authenticate = handled
> (1) Using Post-Auth-Type Challenge
> (1) Post-Auth-Type sub-section not found. Ignoring.
> (1) # Executing group from file /etc/freeradius/sites-enabled/default
> (1) Sent Access-Challenge Id 2 from 192.168.100.201:1812 to
> 192.168.100.113:34296 length 0
> (1) EAP-Message = 0x016b00061920
> (1) Message-Authenticator = 0x00000000000000000000000000000000
> (1) State = 0xb5449406b42f8d001eb003264d869845
> (1) Finished request
> Waking up in 4.9 seconds.
> (2) Received Access-Request Id 3 from 192.168.100.113:34296 to
> 192.168.100.201:1812 length 300
> (2) User-Name = "bchristopher848"
> (2) NAS-IP-Address = 10.0.150.19
> (2) NAS-Identifier = "802aa849d031"
> (2) NAS-Port = 0
> (2) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
> (2) Calling-Station-Id = "00-22-FB-6E-1D-C8"
> (2) Framed-MTU = 1400
> (2) NAS-Port-Type = Wireless-802.11
> (2) Connect-Info = "CONNECT 0Mbps 802.11b"
> (2) EAP-Message = 0x026b007119800000006716030100
> 620100005e030159af03804becec9c3cef8903818c79121606d4cc4552b8
> 68a83f76270fc4ef9200001cc014c013003900330035002fc00ac0090038
> 0032000a00130005000401000019000a0006000400170018000b00020100
> 00170000ff01000100
> (2) State = 0xb5449406b42f8d001eb003264d869845
> (2) Message-Authenticator = 0x03f782e6095d0d07dc5d1122f1876d00
> (2) session-state: No cached attributes
> (2) # Executing section authorize from file /etc/freeradius/sites-enabled/
> default
> (2) authorize {
> (2) policy filter_username {
> (2) if (&User-Name) {
> (2) if (&User-Name) -> TRUE
> (2) if (&User-Name) {
> (2) if (&User-Name =~ /@[^@]*@/ ) {
> (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (2) if (&User-Name =~ /\.\./ ) {
> (2) if (&User-Name =~ /\.\./ ) -> FALSE
> (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (2) if (&User-Name =~ /\.$/) {
> (2) if (&User-Name =~ /\.$/) -> FALSE
> (2) if (&User-Name =~ /@\./) {
> (2) if (&User-Name =~ /@\./) -> FALSE
> (2) } # if (&User-Name) = notfound
> (2) } # policy filter_username = notfound
> (2) [preprocess] = ok
> (2) [chap] = noop
> (2) [mschap] = noop
> (2) suffix: Checking for suffix after "@"
> (2) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
> (2) suffix: No such realm "NULL"
> (2) [suffix] = noop
> (2) eap: Peer sent EAP Response (code 2) ID 107 length 113
> (2) eap: Continuing tunnel setup
> (2) [eap] = ok
> (2) } # authorize = ok
> (2) Found Auth-Type = eap
> (2) # Executing group from file /etc/freeradius/sites-enabled/default
> (2) authenticate {
> (2) eap: Expiring EAP session with state 0xb5449406b42f8d00
> (2) eap: Finished EAP session with state 0xb5449406b42f8d00
> (2) eap: Previous EAP request found for state 0xb5449406b42f8d00, released
> from the list
> (2) eap: Peer sent packet with method EAP PEAP (25)
> (2) eap: Calling submodule eap_peap to process data
> (2) eap_peap: Continuing EAP-TLS
> (2) eap_peap: Peer indicated complete TLS record size will be 103 bytes
> (2) eap_peap: Got complete TLS record (103 bytes)
> (2) eap_peap: [eaptls verify] = length included
> (2) eap_peap: (other): before/accept initialization
> (2) eap_peap: TLS_accept: before/accept initialization
> (2) eap_peap: <<< recv TLS 1.0 Handshake [length 0062], ClientHello
> (2) eap_peap: TLS_accept: unknown state
> (2) eap_peap: >>> send TLS 1.0 Handshake [length 0059], ServerHello
> (2) eap_peap: TLS_accept: unknown state
> (2) eap_peap: >>> send TLS 1.0 Handshake [length 0982], Certificate
> (2) eap_peap: TLS_accept: unknown state
> (2) eap_peap: >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange
> (2) eap_peap: TLS_accept: unknown state
> (2) eap_peap: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone
> (2) eap_peap: TLS_accept: unknown state
> (2) eap_peap: TLS_accept: unknown state
> (2) eap_peap: TLS_accept: unknown state
> (2) eap_peap: TLS_accept: Need to read more data: unknown state
> (2) eap_peap: TLS_accept: Need to read more data: unknown state
> (2) eap_peap: In SSL Handshake Phase
> (2) eap_peap: In SSL Accept mode
> (2) eap_peap: [eaptls process] = handled
> (2) eap: Sending EAP Request (code 1) ID 108 length 1004
> (2) eap: EAP session adding &reply:State = 0xb5449406b7288d00
> (2) [eap] = handled
> (2) } # authenticate = handled
> (2) Using Post-Auth-Type Challenge
> (2) Post-Auth-Type sub-section not found. Ignoring.
> (2) # Executing group from file /etc/freeradius/sites-enabled/default
> (2) Sent Access-Challenge Id 3 from 192.168.100.201:1812 to
> 192.168.100.113:34296 length 0
> (2) EAP-Message = 0x016c03ec19c000000b3e16030100
> 5902000055030198325853d6a4ea0a8a0ddc62e8252c55dce33ce836984b
> 265c5d4a2663c775ad20a5464acc7366d8b86f656371288daf4a0e68ce7f
> 820f064ff457b9622cb4e509c01400000dff01000100000b000403000102
> 16030109820b00097e00097b000426
> (2) Message-Authenticator = 0x00000000000000000000000000000000
> (2) State = 0xb5449406b7288d001eb003264d869845
> (2) Finished request
> Waking up in 4.9 seconds.
> (3) Received Access-Request Id 4 from 192.168.100.113:34296 to
> 192.168.100.201:1812 length 193
> (3) User-Name = "bchristopher848"
> (3) NAS-IP-Address = 10.0.150.19
> (3) NAS-Identifier = "802aa849d031"
> (3) NAS-Port = 0
> (3) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
> (3) Calling-Station-Id = "00-22-FB-6E-1D-C8"
> (3) Framed-MTU = 1400
> (3) NAS-Port-Type = Wireless-802.11
> (3) Connect-Info = "CONNECT 0Mbps 802.11b"
> (3) EAP-Message = 0x026c00061900
> (3) State = 0xb5449406b7288d001eb003264d869845
> (3) Message-Authenticator = 0xe754c603a90fd754f21a295dadc62814
> (3) session-state: No cached attributes
> (3) # Executing section authorize from file /etc/freeradius/sites-enabled/
> default
> (3) authorize {
> (3) policy filter_username {
> (3) if (&User-Name) {
> (3) if (&User-Name) -> TRUE
> (3) if (&User-Name) {
> (3) if (&User-Name =~ /@[^@]*@/ ) {
> (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (3) if (&User-Name =~ /\.\./ ) {
> (3) if (&User-Name =~ /\.\./ ) -> FALSE
> (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (3) if (&User-Name =~ /\.$/) {
> (3) if (&User-Name =~ /\.$/) -> FALSE
> (3) if (&User-Name =~ /@\./) {
> (3) if (&User-Name =~ /@\./) -> FALSE
> (3) } # if (&User-Name) = notfound
> (3) } # policy filter_username = notfound
> (3) [preprocess] = ok
> (3) [chap] = noop
> (3) [mschap] = noop
> (3) suffix: Checking for suffix after "@"
> (3) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
> (3) suffix: No such realm "NULL"
> (3) [suffix] = noop
> (3) eap: Peer sent EAP Response (code 2) ID 108 length 6
> (3) eap: Continuing tunnel setup
> (3) [eap] = ok
> (3) } # authorize = ok
> (3) Found Auth-Type = eap
> (3) # Executing group from file /etc/freeradius/sites-enabled/default
> (3) authenticate {
> (3) eap: Expiring EAP session with state 0xb5449406b7288d00
> (3) eap: Finished EAP session with state 0xb5449406b7288d00
> (3) eap: Previous EAP request found for state 0xb5449406b7288d00, released
> from the list
> (3) eap: Peer sent packet with method EAP PEAP (25)
> (3) eap: Calling submodule eap_peap to process data
> (3) eap_peap: Continuing EAP-TLS
> (3) eap_peap: Peer ACKed our handshake fragment
> (3) eap_peap: [eaptls verify] = request
> (3) eap_peap: [eaptls process] = handled
> (3) eap: Sending EAP Request (code 1) ID 109 length 1000
> (3) eap: EAP session adding &reply:State = 0xb5449406b6298d00
> (3) [eap] = handled
> (3) } # authenticate = handled
> (3) Using Post-Auth-Type Challenge
> (3) Post-Auth-Type sub-section not found. Ignoring.
> (3) # Executing group from file /etc/freeradius/sites-enabled/default
> (3) Sent Access-Challenge Id 4 from 192.168.100.201:1812 to
> 192.168.100.113:34296 length 0
> (3) EAP-Message = 0x016d03e81940380fa68fefb0adb1
> 60bf876008cdd25df7f1bb575a26398125bf6a36bcf24e3cf136422c1048
> b034887efbcce1ad27c885f67ae13c739af72b5bbff6b9f7cc41b9b006ed
> dd88d6cf5d54f66bb9884ac2f40853d3af5d741bb79faa72df0324c58d44
> 8bd2c5583caee59c318907018948f4
> (3) Message-Authenticator = 0x00000000000000000000000000000000
> (3) State = 0xb5449406b6298d001eb003264d869845
> (3) Finished request
> Waking up in 4.9 seconds.
> (4) Received Access-Request Id 5 from 192.168.100.113:34296 to
> 192.168.100.201:1812 length 193
> (4) User-Name = "bchristopher848"
> (4) NAS-IP-Address = 10.0.150.19
> (4) NAS-Identifier = "802aa849d031"
> (4) NAS-Port = 0
> (4) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
> (4) Calling-Station-Id = "00-22-FB-6E-1D-C8"
> (4) Framed-MTU = 1400
> (4) NAS-Port-Type = Wireless-802.11
> (4) Connect-Info = "CONNECT 0Mbps 802.11b"
> (4) EAP-Message = 0x026d00061900
> (4) State = 0xb5449406b6298d001eb003264d869845
> (4) Message-Authenticator = 0x1308f82dd9c153d060e2d3f92f0e47c9
> (4) session-state: No cached attributes
> (4) # Executing section authorize from file /etc/freeradius/sites-enabled/
> default
> (4) authorize {
> (4) policy filter_username {
> (4) if (&User-Name) {
> (4) if (&User-Name) -> TRUE
> (4) if (&User-Name) {
> (4) if (&User-Name =~ /@[^@]*@/ ) {
> (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (4) if (&User-Name =~ /\.\./ ) {
> (4) if (&User-Name =~ /\.\./ ) -> FALSE
> (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (4) if (&User-Name =~ /\.$/) {
> (4) if (&User-Name =~ /\.$/) -> FALSE
> (4) if (&User-Name =~ /@\./) {
> (4) if (&User-Name =~ /@\./) -> FALSE
> (4) } # if (&User-Name) = notfound
> (4) } # policy filter_username = notfound
> (4) [preprocess] = ok
> (4) [chap] = noop
> (4) [mschap] = noop
> (4) suffix: Checking for suffix after "@"
> (4) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
> (4) suffix: No such realm "NULL"
> (4) [suffix] = noop
> (4) eap: Peer sent EAP Response (code 2) ID 109 length 6
> (4) eap: Continuing tunnel setup
> (4) [eap] = ok
> (4) } # authorize = ok
> (4) Found Auth-Type = eap
> (4) # Executing group from file /etc/freeradius/sites-enabled/default
> (4) authenticate {
> (4) eap: Expiring EAP session with state 0xb5449406b6298d00
> (4) eap: Finished EAP session with state 0xb5449406b6298d00
> (4) eap: Previous EAP request found for state 0xb5449406b6298d00, released
> from the list
> (4) eap: Peer sent packet with method EAP PEAP (25)
> (4) eap: Calling submodule eap_peap to process data
> (4) eap_peap: Continuing EAP-TLS
> (4) eap_peap: Peer ACKed our handshake fragment
> (4) eap_peap: [eaptls verify] = request
> (4) eap_peap: [eaptls process] = handled
> (4) eap: Sending EAP Request (code 1) ID 110 length 896
> (4) eap: EAP session adding &reply:State = 0xb5449406b12a8d00
> (4) [eap] = handled
> (4) } # authenticate = handled
> (4) Using Post-Auth-Type Challenge
> (4) Post-Auth-Type sub-section not found. Ignoring.
> (4) # Executing group from file /etc/freeradius/sites-enabled/default
> (4) Sent Access-Challenge Id 5 from 192.168.100.201:1812 to
> 192.168.100.113:34296 length 0
> (4) EAP-Message = 0x016e038019003081b5310b300906
> 0355040613024d543111300f06035504080c0849722d5261626174311230
> 1006035504070c0954616c2d566972747531223020060355040a0c195468
> 652041726368626973686f70732053656d696e6172792e3128302606092a
> 864886f70d0109011619746563686e
> (4) Message-Authenticator = 0x00000000000000000000000000000000
> (4) State = 0xb5449406b12a8d001eb003264d869845
> (4) Finished request
> Waking up in 4.9 seconds.
> (5) Received Access-Request Id 6 from 192.168.100.113:34296 to
> 192.168.100.201:1812 length 331
> (5) User-Name = "bchristopher848"
> (5) NAS-IP-Address = 10.0.150.19
> (5) NAS-Identifier = "802aa849d031"
> (5) NAS-Port = 0
> (5) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
> (5) Calling-Station-Id = "00-22-FB-6E-1D-C8"
> (5) Framed-MTU = 1400
> (5) NAS-Port-Type = Wireless-802.11
> (5) Connect-Info = "CONNECT 0Mbps 802.11b"
> (5) EAP-Message = 0x026e009019800000008616030100
> 46100000424104f8835ccc6647e01b6ec2e669280021622082e4c4d31a30
> ed462cac3b447792cb9763fb1c6f5547b7650c9216b8a36641f100200f17
> d1246ba46fc9eb9cef2cbf140301000101160301003036330cfdd1b9bd52
> 1432d38a6be17cb4205d318a83802a
> (5) State = 0xb5449406b12a8d001eb003264d869845
> (5) Message-Authenticator = 0x7e43591038f26410ddbfc952608bf3e1
> (5) session-state: No cached attributes
> (5) # Executing section authorize from file /etc/freeradius/sites-enabled/
> default
> (5) authorize {
> (5) policy filter_username {
> (5) if (&User-Name) {
> (5) if (&User-Name) -> TRUE
> (5) if (&User-Name) {
> (5) if (&User-Name =~ /@[^@]*@/ ) {
> (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (5) if (&User-Name =~ /\.\./ ) {
> (5) if (&User-Name =~ /\.\./ ) -> FALSE
> (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (5) if (&User-Name =~ /\.$/) {
> (5) if (&User-Name =~ /\.$/) -> FALSE
> (5) if (&User-Name =~ /@\./) {
> (5) if (&User-Name =~ /@\./) -> FALSE
> (5) } # if (&User-Name) = notfound
> (5) } # policy filter_username = notfound
> (5) [preprocess] = ok
> (5) [chap] = noop
> (5) [mschap] = noop
> (5) suffix: Checking for suffix after "@"
> (5) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
> (5) suffix: No such realm "NULL"
> (5) [suffix] = noop
> (5) eap: Peer sent EAP Response (code 2) ID 110 length 144
> (5) eap: Continuing tunnel setup
> (5) [eap] = ok
> (5) } # authorize = ok
> (5) Found Auth-Type = eap
> (5) # Executing group from file /etc/freeradius/sites-enabled/default
> (5) authenticate {
> (5) eap: Expiring EAP session with state 0xb5449406b12a8d00
> (5) eap: Finished EAP session with state 0xb5449406b12a8d00
> (5) eap: Previous EAP request found for state 0xb5449406b12a8d00, released
> from the list
> (5) eap: Peer sent packet with method EAP PEAP (25)
> (5) eap: Calling submodule eap_peap to process data
> (5) eap_peap: Continuing EAP-TLS
> (5) eap_peap: Peer indicated complete TLS record size will be 134 bytes
> (5) eap_peap: Got complete TLS record (134 bytes)
> (5) eap_peap: [eaptls verify] = length included
> (5) eap_peap: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange
> (5) eap_peap: TLS_accept: unknown state
> (5) eap_peap: TLS_accept: unknown state
> (5) eap_peap: <<< recv TLS 1.0 ChangeCipherSpec [length 0001]
> (5) eap_peap: <<< recv TLS 1.0 Handshake [length 0010], Finished
> (5) eap_peap: TLS_accept: unknown state
> (5) eap_peap: >>> send TLS 1.0 ChangeCipherSpec [length 0001]
> (5) eap_peap: TLS_accept: unknown state
> (5) eap_peap: >>> send TLS 1.0 Handshake [length 0010], Finished
> (5) eap_peap: TLS_accept: unknown state
> (5) eap_peap: TLS_accept: unknown state
> (5) eap_peap: (other): SSL negotiation finished successfully
> (5) eap_peap: SSL Connection Established
> (5) eap_peap: [eaptls process] = handled
> (5) eap: Sending EAP Request (code 1) ID 111 length 65
> (5) eap: EAP session adding &reply:State = 0xb5449406b02b8d00
> (5) [eap] = handled
> (5) } # authenticate = handled
> (5) Using Post-Auth-Type Challenge
> (5) Post-Auth-Type sub-section not found. Ignoring.
> (5) # Executing group from file /etc/freeradius/sites-enabled/default
> (5) Sent Access-Challenge Id 6 from 192.168.100.201:1812 to
> 192.168.100.113:34296 length 0
> (5) EAP-Message = 0x016f004119001403010001011603
> 01003094086787833117af433bc1c929281ae2f5f7cd6692f7cc59d0a0bf
> 65c818294d2b79cc16f11ac9f86e10a67a7fdb1a6b
> (5) Message-Authenticator = 0x00000000000000000000000000000000
> (5) State = 0xb5449406b02b8d001eb003264d869845
> (5) Finished request
> Waking up in 4.9 seconds.
> (6) Received Access-Request Id 7 from 192.168.100.113:34296 to
> 192.168.100.201:1812 length 193
> (6) User-Name = "bchristopher848"
> (6) NAS-IP-Address = 10.0.150.19
> (6) NAS-Identifier = "802aa849d031"
> (6) NAS-Port = 0
> (6) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
> (6) Calling-Station-Id = "00-22-FB-6E-1D-C8"
> (6) Framed-MTU = 1400
> (6) NAS-Port-Type = Wireless-802.11
> (6) Connect-Info = "CONNECT 0Mbps 802.11b"
> (6) EAP-Message = 0x026f00061900
> (6) State = 0xb5449406b02b8d001eb003264d869845
> (6) Message-Authenticator = 0x89f89025177c0801e5cd47b689bb35ec
> (6) session-state: No cached attributes
> (6) # Executing section authorize from file /etc/freeradius/sites-enabled/
> default
> (6) authorize {
> (6) policy filter_username {
> (6) if (&User-Name) {
> (6) if (&User-Name) -> TRUE
> (6) if (&User-Name) {
> (6) if (&User-Name =~ /@[^@]*@/ ) {
> (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (6) if (&User-Name =~ /\.\./ ) {
> (6) if (&User-Name =~ /\.\./ ) -> FALSE
> (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (6) if (&User-Name =~ /\.$/) {
> (6) if (&User-Name =~ /\.$/) -> FALSE
> (6) if (&User-Name =~ /@\./) {
> (6) if (&User-Name =~ /@\./) -> FALSE
> (6) } # if (&User-Name) = notfound
> (6) } # policy filter_username = notfound
> (6) [preprocess] = ok
> (6) [chap] = noop
> (6) [mschap] = noop
> (6) suffix: Checking for suffix after "@"
> (6) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
> (6) suffix: No such realm "NULL"
> (6) [suffix] = noop
> (6) eap: Peer sent EAP Response (code 2) ID 111 length 6
> (6) eap: Continuing tunnel setup
> (6) [eap] = ok
> (6) } # authorize = ok
> (6) Found Auth-Type = eap
> (6) # Executing group from file /etc/freeradius/sites-enabled/default
> (6) authenticate {
> (6) eap: Expiring EAP session with state 0xb5449406b02b8d00
> (6) eap: Finished EAP session with state 0xb5449406b02b8d00
> (6) eap: Previous EAP request found for state 0xb5449406b02b8d00, released
> from the list
> (6) eap: Peer sent packet with method EAP PEAP (25)
> (6) eap: Calling submodule eap_peap to process data
> (6) eap_peap: Continuing EAP-TLS
> (6) eap_peap: Peer ACKed our handshake fragment. handshake is finished
> (6) eap_peap: [eaptls verify] = success
> (6) eap_peap: [eaptls process] = success
> (6) eap_peap: Session established. Decoding tunneled attributes
> (6) eap_peap: PEAP state TUNNEL ESTABLISHED
> (6) eap: Sending EAP Request (code 1) ID 112 length 43
> (6) eap: EAP session adding &reply:State = 0xb5449406b3348d00
> (6) [eap] = handled
> (6) } # authenticate = handled
> (6) Using Post-Auth-Type Challenge
> (6) Post-Auth-Type sub-section not found. Ignoring.
> (6) # Executing group from file /etc/freeradius/sites-enabled/default
> (6) Sent Access-Challenge Id 7 from 192.168.100.201:1812 to
> 192.168.100.113:34296 length 0
> (6) EAP-Message = 0x0170002b1900170301002091eabc
> 824030fa0d118d08413389ff5a78d63a9561aa4704edb36913865e9641
> (6) Message-Authenticator = 0x00000000000000000000000000000000
> (6) State = 0xb5449406b3348d001eb003264d869845
> (6) Finished request
> Waking up in 2.6 seconds.
> (7) Received Access-Request Id 8 from 192.168.100.113:34296 to
> 192.168.100.201:1812 length 246
> (7) User-Name = "bchristopher848"
> (7) NAS-IP-Address = 10.0.150.19
> (7) NAS-Identifier = "802aa849d031"
> (7) NAS-Port = 0
> (7) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
> (7) Calling-Station-Id = "00-22-FB-6E-1D-C8"
> (7) Framed-MTU = 1400
> (7) NAS-Port-Type = Wireless-802.11
> (7) Connect-Info = "CONNECT 0Mbps 802.11b"
> (7) EAP-Message = 0x0270003b19001703010030c8fbf0
> 015e3e5a875a826ccd41cd45b083183d0fbf452e6e4ccdc2b10c2d758557
> f2bf2ba865abb148620ece26115524
> (7) State = 0xb5449406b3348d001eb003264d869845
> (7) Message-Authenticator = 0x0ec21e66dd7cd4e0a4858c79afabd736
> (7) session-state: No cached attributes
> (7) # Executing section authorize from file /etc/freeradius/sites-enabled/
> default
> (7) authorize {
> (7) policy filter_username {
> (7) if (&User-Name) {
> (7) if (&User-Name) -> TRUE
> (7) if (&User-Name) {
> (7) if (&User-Name =~ /@[^@]*@/ ) {
> (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (7) if (&User-Name =~ /\.\./ ) {
> (7) if (&User-Name =~ /\.\./ ) -> FALSE
> (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (7) if (&User-Name =~ /\.$/) {
> (7) if (&User-Name =~ /\.$/) -> FALSE
> (7) if (&User-Name =~ /@\./) {
> (7) if (&User-Name =~ /@\./) -> FALSE
> (7) } # if (&User-Name) = notfound
> (7) } # policy filter_username = notfound
> (7) [preprocess] = ok
> (7) [chap] = noop
> (7) [mschap] = noop
> (7) suffix: Checking for suffix after "@"
> (7) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
> (7) suffix: No such realm "NULL"
> (7) [suffix] = noop
> (7) eap: Peer sent EAP Response (code 2) ID 112 length 59
> (7) eap: Continuing tunnel setup
> (7) [eap] = ok
> (7) } # authorize = ok
> (7) Found Auth-Type = eap
> (7) # Executing group from file /etc/freeradius/sites-enabled/default
> (7) authenticate {
> (7) eap: Expiring EAP session with state 0xb5449406b3348d00
> (7) eap: Finished EAP session with state 0xb5449406b3348d00
> (7) eap: Previous EAP request found for state 0xb5449406b3348d00, released
> from the list
> (7) eap: Peer sent packet with method EAP PEAP (25)
> (7) eap: Calling submodule eap_peap to process data
> (7) eap_peap: Continuing EAP-TLS
> (7) eap_peap: [eaptls verify] = ok
> (7) eap_peap: Done initial handshake
> (7) eap_peap: [eaptls process] = ok
> (7) eap_peap: Session established. Decoding tunneled attributes
> (7) eap_peap: PEAP state WAITING FOR INNER IDENTITY
> (7) eap_peap: Identity - bchristopher848
> (7) eap_peap: Got inner identity 'bchristopher848'
> (7) eap_peap: Setting default EAP type for tunneled EAP session
> (7) eap_peap: Got tunneled request
> (7) eap_peap: EAP-Message = 0x0270001401626368726973746f70686572383438
> (7) eap_peap: Setting User-Name to bchristopher848
> (7) eap_peap: Sending tunneled request to inner-tunnel
> (7) eap_peap: EAP-Message = 0x0270001401626368726973746f70686572383438
> (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
> (7) eap_peap: User-Name = "bchristopher848"
> (7) Virtual server inner-tunnel received request
> (7) EAP-Message = 0x0270001401626368726973746f70686572383438
> (7) FreeRADIUS-Proxied-To = 127.0.0.1
> (7) User-Name = "bchristopher848"
> (7) WARNING: Outer and inner identities are the same. User privacy is
> compromised.
> (7) server inner-tunnel {
> (7) # Executing section authorize from file
> /etc/freeradius/sites-enabled/inner-tunnel
> (7) authorize {
> (7) policy filter_username {
> (7) if (&User-Name) {
> (7) if (&User-Name) -> TRUE
> (7) if (&User-Name) {
> (7) if (&User-Name =~ /@[^@]*@/ ) {
> (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (7) if (&User-Name =~ /\.\./ ) {
> (7) if (&User-Name =~ /\.\./ ) -> FALSE
> (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (7) if (&User-Name =~ /\.$/) {
> (7) if (&User-Name =~ /\.$/) -> FALSE
> (7) if (&User-Name =~ /@\./) {
> (7) if (&User-Name =~ /@\./) -> FALSE
> (7) } # if (&User-Name) = notfound
> (7) } # policy filter_username = notfound
> (7) [chap] = noop
> (7) [mschap] = noop
> (7) suffix: Checking for suffix after "@"
> (7) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
> (7) suffix: No such realm "NULL"
> (7) [suffix] = noop
> (7) update control {
> (7) &Proxy-To-Realm := LOCAL
> (7) } # update control = noop
> (7) eap: Peer sent EAP Response (code 2) ID 112 length 20
> (7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
> rest of authorize
> (7) [eap] = ok
> (7) } # authorize = ok
> (7) Found Auth-Type = eap
> (7) # Executing group from file /etc/freeradius/sites-enabled/
> inner-tunnel
> (7) authenticate {
> (7) eap: Peer sent packet with method EAP Identity (1)
> (7) eap: Calling submodule eap_mschapv2 to process data
> (7) eap_mschapv2: Issuing Challenge
> (7) eap: Sending EAP Request (code 1) ID 113 length 43
> (7) eap: EAP session adding &reply:State = 0x38f91b6e38880129
> (7) [eap] = handled
> (7) } # authenticate = handled
> (7) } # server inner-tunnel
> (7) Virtual server sending reply
> (7) EAP-Message = 0x0171002b1a01710026100f1b0f77
> 8f0e5ff10d130bcde3f0a1f0667265657261646975732d332e302e3135
> (7) Message-Authenticator = 0x00000000000000000000000000000000
> (7) State = 0x38f91b6e38880129b3a6b459c0f91610
> (7) eap_peap: Got tunneled reply code 11
> (7) eap_peap: EAP-Message = 0x0171002b1a01710026100f1b0f77
> 8f0e5ff10d130bcde3f0a1f0667265657261646975732d332e302e3135
> (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
> (7) eap_peap: State = 0x38f91b6e38880129b3a6b459c0f91610
> (7) eap_peap: Got tunneled reply RADIUS code 11
> (7) eap_peap: EAP-Message = 0x0171002b1a01710026100f1b0f77
> 8f0e5ff10d130bcde3f0a1f0667265657261646975732d332e302e3135
> (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
> (7) eap_peap: State = 0x38f91b6e38880129b3a6b459c0f91610
> (7) eap_peap: Got tunneled Access-Challenge
> (7) eap: Sending EAP Request (code 1) ID 113 length 75
> (7) eap: EAP session adding &reply:State = 0xb5449406b2358d00
> (7) [eap] = handled
> (7) } # authenticate = handled
> (7) Using Post-Auth-Type Challenge
> (7) Post-Auth-Type sub-section not found. Ignoring.
> (7) # Executing group from file /etc/freeradius/sites-enabled/default
> (7) Sent Access-Challenge Id 8 from 192.168.100.201:1812 to
> 192.168.100.113:34296 length 0
> (7) EAP-Message = 0x0171004b190017030100403a39fb
> 1bbb95a5bdae36dec7bbaf48cd6d67436cc6fa144c66482d9a55dee6efc1
> 22c2ae145e37423201a0becee44924132e0e197859e4e437513ae27427e3a6
> (7) Message-Authenticator = 0x00000000000000000000000000000000
> (7) State = 0xb5449406b2358d001eb003264d869845
> (7) Finished request
> Waking up in 2.6 seconds.
> (8) Received Access-Request Id 9 from 192.168.100.113:34296 to
> 192.168.100.201:1812 length 294
> (8) User-Name = "bchristopher848"
> (8) NAS-IP-Address = 10.0.150.19
> (8) NAS-Identifier = "802aa849d031"
> (8) NAS-Port = 0
> (8) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
> (8) Calling-Station-Id = "00-22-FB-6E-1D-C8"
> (8) Framed-MTU = 1400
> (8) NAS-Port-Type = Wireless-802.11
> (8) Connect-Info = "CONNECT 0Mbps 802.11b"
> (8) EAP-Message = 0x0271006b19001703010060dc68da
> 606888205a8249468c13811c37cc426f2ad4ed4ed80b369f946ab0e0029d
> 069f9b903b244d4822ebf72b429433c990dcfef3af28b8871c7653e7c286
> d1c4ad435ad1812458eaec44dc637bf173969928be0946944de2762170de365dc0
> (8) State = 0xb5449406b2358d001eb003264d869845
> (8) Message-Authenticator = 0xf489ba028df4298dc612460d97cc98ee
> (8) session-state: No cached attributes
> (8) # Executing section authorize from file /etc/freeradius/sites-enabled/
> default
> (8) authorize {
> (8) policy filter_username {
> (8) if (&User-Name) {
> (8) if (&User-Name) -> TRUE
> (8) if (&User-Name) {
> (8) if (&User-Name =~ /@[^@]*@/ ) {
> (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (8) if (&User-Name =~ /\.\./ ) {
> (8) if (&User-Name =~ /\.\./ ) -> FALSE
> (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (8) if (&User-Name =~ /\.$/) {
> (8) if (&User-Name =~ /\.$/) -> FALSE
> (8) if (&User-Name =~ /@\./) {
> (8) if (&User-Name =~ /@\./) -> FALSE
> (8) } # if (&User-Name) = notfound
> (8) } # policy filter_username = notfound
> (8) [preprocess] = ok
> (8) [chap] = noop
> (8) [mschap] = noop
> (8) suffix: Checking for suffix after "@"
> (8) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
> (8) suffix: No such realm "NULL"
> (8) [suffix] = noop
> (8) eap: Peer sent EAP Response (code 2) ID 113 length 107
> (8) eap: Continuing tunnel setup
> (8) [eap] = ok
> (8) } # authorize = ok
> (8) Found Auth-Type = eap
> (8) # Executing group from file /etc/freeradius/sites-enabled/default
> (8) authenticate {
> (8) eap: Expiring EAP session with state 0x38f91b6e38880129
> (8) eap: Finished EAP session with state 0xb5449406b2358d00
> (8) eap: Previous EAP request found for state 0xb5449406b2358d00, released
> from the list
> (8) eap: Peer sent packet with method EAP PEAP (25)
> (8) eap: Calling submodule eap_peap to process data
> (8) eap_peap: Continuing EAP-TLS
> (8) eap_peap: [eaptls verify] = ok
> (8) eap_peap: Done initial handshake
> (8) eap_peap: [eaptls process] = ok
> (8) eap_peap: Session established. Decoding tunneled attributes
> (8) eap_peap: PEAP state phase2
> (8) eap_peap: EAP method MSCHAPv2 (26)
> (8) eap_peap: Got tunneled request
> (8) eap_peap: EAP-Message = 0x0271004a1a027100453136aadef2
> a35125429a547478d2433260000000000000000026bd920d94eca847c70d
> 9775f4afe71538b455e9932097c600626368726973746f70686572383438
> (8) eap_peap: Setting User-Name to bchristopher848
> (8) eap_peap: Sending tunneled request to inner-tunnel
> (8) eap_peap: EAP-Message = 0x0271004a1a027100453136aadef2
> a35125429a547478d2433260000000000000000026bd920d94eca847c70d
> 9775f4afe71538b455e9932097c600626368726973746f70686572383438
> (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
> (8) eap_peap: User-Name = "bchristopher848"
> (8) eap_peap: State = 0x38f91b6e38880129b3a6b459c0f91610
> (8) Virtual server inner-tunnel received request
> (8) EAP-Message = 0x0271004a1a027100453136aadef2
> a35125429a547478d2433260000000000000000026bd920d94eca847c70d
> 9775f4afe71538b455e9932097c600626368726973746f70686572383438
> (8) FreeRADIUS-Proxied-To = 127.0.0.1
> (8) User-Name = "bchristopher848"
> (8) State = 0x38f91b6e38880129b3a6b459c0f91610
> (8) WARNING: Outer and inner identities are the same. User privacy is
> compromised.
> (8) server inner-tunnel {
> (8) session-state: No cached attributes
> (8) # Executing section authorize from file
> /etc/freeradius/sites-enabled/inner-tunnel
> (8) authorize {
> (8) policy filter_username {
> (8) if (&User-Name) {
> (8) if (&User-Name) -> TRUE
> (8) if (&User-Name) {
> (8) if (&User-Name =~ /@[^@]*@/ ) {
> (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (8) if (&User-Name =~ /\.\./ ) {
> (8) if (&User-Name =~ /\.\./ ) -> FALSE
> (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (8) if (&User-Name =~ /\.$/) {
> (8) if (&User-Name =~ /\.$/) -> FALSE
> (8) if (&User-Name =~ /@\./) {
> (8) if (&User-Name =~ /@\./) -> FALSE
> (8) } # if (&User-Name) = notfound
> (8) } # policy filter_username = notfound
> (8) [chap] = noop
> (8) [mschap] = noop
> (8) suffix: Checking for suffix after "@"
> (8) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
> (8) suffix: No such realm "NULL"
> (8) [suffix] = noop
> (8) update control {
> (8) &Proxy-To-Realm := LOCAL
> (8) } # update control = noop
> (8) eap: Peer sent EAP Response (code 2) ID 113 length 74
> (8) eap: No EAP Start, assuming it's an on-going EAP conversation
> (8) [eap] = updated
> (8) [files] = noop
> rlm_ldap (ldap): Reserved connection (1)
> (8) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
> (8) ldap: --> (cn=bchristopher848)
> (8) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with
> filter "(cn=bchristopher848)", scope "sub"
> (8) ldap: Waiting for search result...
> (8) ldap: User object found at DN "cn=bchristopher848,cn=
> Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
> (8) ldap: Processing user attributes
> (8) ldap: control:Password-With-Header += '{ssha}o1fjrtGMqroWxrIgC8G/
> jwK8GK5BxvANe+pK7w=='
> rlm_ldap (ldap): Released connection (1)
> Need 4 more connections to reach 10 spares
> rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://localhost:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> (8) [ldap] = updated
> rlm_ldap (adldap): Reserved connection (1)
> (8) adldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
> (8) adldap: --> (cn=bchristopher848)
> (8) adldap: Performing search in "ou=School,dc=seminary,dc=ad" with filter
> "(cn=bchristopher848)", scope "sub"
> (8) adldap: Waiting for search result...
> (8) adldap: The specified DN wasn't found
> (8) adldap: Search returned no results
> rlm_ldap (adldap): Released connection (1)
> Need 4 more connections to reach 10 spares
> rlm_ldap (adldap): Opening additional connection (6), 1 of 26 pending
> slots used
> rlm_ldap (adldap): Connecting to ldap://localhost:389
> rlm_ldap (adldap): Waiting for bind result...
> rlm_ldap (adldap): Bind successful
> (8) [adldap] = notfound
> (8) [expiration] = noop
> (8) [logintime] = noop
> (8) pap: Converted: &control:Password-With-Header ->
> &control:SSHA1-Password
> (8) pap: Removing &control:Password-With-Header
> (8) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28
> bytes
> (8) pap: WARNING: Auth-Type already set. Not setting to PAP
> (8) [pap] = noop
> (8) } # authorize = updated
> (8) Found Auth-Type = eap
> (8) # Executing group from file /etc/freeradius/sites-enabled/
> inner-tunnel
> (8) authenticate {
> (8) eap: Expiring EAP session with state 0x38f91b6e38880129
> (8) eap: Finished EAP session with state 0x38f91b6e38880129
> (8) eap: Previous EAP request found for state 0x38f91b6e38880129, released
> from the list
> (8) eap: Peer sent packet with method EAP MSCHAPv2 (26)
> (8) eap: Calling submodule eap_mschapv2 to process data
> (8) eap_mschapv2: # Executing group from file
> /etc/freeradius/sites-enabled/inner-tunnel
> (8) eap_mschapv2: Auth-Type MS-CHAP {
> (8) mschap: WARNING: No Cleartext-Password configured. Cannot create
> NT-Password
> (8) mschap: WARNING: No Cleartext-Password configured. Cannot create
> LM-Password
> (8) mschap: Creating challenge hash with username: bchristopher848
> (8) mschap: Client is using MS-CHAPv2
> (8) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform
> authentication
> (8) mschap: ERROR: MS-CHAP2-Response is incorrect
> (8) [mschap] = reject
> (8) } # Auth-Type MS-CHAP = reject
> (8) eap: Sending EAP Failure (code 4) ID 113 length 4
> (8) eap: Freeing handler
> (8) [eap] = reject
> (8) } # authenticate = reject
> (8) Failed to authenticate the user
> (8) Using Post-Auth-Type Reject
> (8) # Executing group from file /etc/freeradius/sites-enabled/
> inner-tunnel
> (8) Post-Auth-Type REJECT {
> (8) attr_filter.access_reject: EXPAND %{User-Name}
> (8) attr_filter.access_reject: --> bchristopher848
> (8) attr_filter.access_reject: Matched entry DEFAULT at line 11
> (8) [attr_filter.access_reject] = updated
> (8) update outer.session-state {
> (8) &Module-Failure-Message := &request:Module-Failure-Message ->
> 'mschap: FAILED: No NT/LM-Password. Cannot perform authentication'
> (8) } # update outer.session-state = noop
> (8) } # Post-Auth-Type REJECT = updated
> (8) } # server inner-tunnel
> (8) Virtual server sending reply
> (8) MS-CHAP-Error = "qE=691 R=1 C=523d66a28c934a7937a449415ae8f8ad V=3
> M=Authentication failed"
> (8) EAP-Message = 0x04710004
> (8) Message-Authenticator = 0x00000000000000000000000000000000
> (8) eap_peap: Got tunneled reply code 3
> (8) eap_peap: MS-CHAP-Error = "qE=691 R=1 C=
> 523d66a28c934a7937a449415ae8f8ad V=3 M=Authentication failed"
> (8) eap_peap: EAP-Message = 0x04710004
> (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
> (8) eap_peap: Got tunneled reply RADIUS code 3
> (8) eap_peap: MS-CHAP-Error = "qE=691 R=1 C=
> 523d66a28c934a7937a449415ae8f8ad V=3 M=Authentication failed"
> (8) eap_peap: EAP-Message = 0x04710004
> (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
> (8) eap_peap: Tunneled authentication was rejected
> (8) eap_peap: FAILURE
> (8) eap: Sending EAP Request (code 1) ID 114 length 43
> (8) eap: EAP session adding &reply:State = 0xb5449406bd368d00
> (8) [eap] = handled
> (8) } # authenticate = handled
> (8) Using Post-Auth-Type Challenge
> (8) Post-Auth-Type sub-section not found. Ignoring.
> (8) # Executing group from file /etc/freeradius/sites-enabled/default
> (8) session-state: Saving cached attributes
> (8) Module-Failure-Message := "mschap: FAILED: No NT/LM-Password.
> Cannot perform authentication"
> (8) Sent Access-Challenge Id 9 from 192.168.100.201:1812 to
> 192.168.100.113:34296 length 0
> (8) EAP-Message = 0x0172002b190017030100207447ef
> 7e889f505a2467ece5e23e6132aabd5ae2a2b62f44232ce0581e567dc8
> (8) Message-Authenticator = 0x00000000000000000000000000000000
> (8) State = 0xb5449406bd368d001eb003264d869845
> (8) Finished request
> Waking up in 2.6 seconds.
> (9) Received Access-Request Id 10 from 192.168.100.113:34296 to
> 192.168.100.201:1812 length 230
> (9) User-Name = "bchristopher848"
> (9) NAS-IP-Address = 10.0.150.19
> (9) NAS-Identifier = "802aa849d031"
> (9) NAS-Port = 0
> (9) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
> (9) Calling-Station-Id = "00-22-FB-6E-1D-C8"
> (9) Framed-MTU = 1400
> (9) NAS-Port-Type = Wireless-802.11
> (9) Connect-Info = "CONNECT 0Mbps 802.11b"
> (9) EAP-Message = 0x0272002b19001703010020c6855d
> 5f0630c6486963b3a872b1ce4479a9d9748bb1a8d28a488183707339de
> (9) State = 0xb5449406bd368d001eb003264d869845
> (9) Message-Authenticator = 0xe32f0f6506920ee010991cab23cdc592
> (9) Restoring &session-state
> (9) &session-state:Module-Failure-Message := "mschap: FAILED: No
> NT/LM-Password. Cannot perform authentication"
> (9) # Executing section authorize from file /etc/freeradius/sites-enabled/
> default
> (9) authorize {
> (9) policy filter_username {
> (9) if (&User-Name) {
> (9) if (&User-Name) -> TRUE
> (9) if (&User-Name) {
> (9) if (&User-Name =~ /@[^@]*@/ ) {
> (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (9) if (&User-Name =~ /\.\./ ) {
> (9) if (&User-Name =~ /\.\./ ) -> FALSE
> (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (9) if (&User-Name =~ /\.$/) {
> (9) if (&User-Name =~ /\.$/) -> FALSE
> (9) if (&User-Name =~ /@\./) {
> (9) if (&User-Name =~ /@\./) -> FALSE
> (9) } # if (&User-Name) = notfound
> (9) } # policy filter_username = notfound
> (9) [preprocess] = ok
> (9) [chap] = noop
> (9) [mschap] = noop
> (9) suffix: Checking for suffix after "@"
> (9) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
> (9) suffix: No such realm "NULL"
> (9) [suffix] = noop
> (9) eap: Peer sent EAP Response (code 2) ID 114 length 43
> (9) eap: Continuing tunnel setup
> (9) [eap] = ok
> (9) } # authorize = ok
> (9) Found Auth-Type = eap
> (9) # Executing group from file /etc/freeradius/sites-enabled/default
> (9) authenticate {
> (9) eap: Expiring EAP session with state 0xb5449406bd368d00
> (9) eap: Finished EAP session with state 0xb5449406bd368d00
> (9) eap: Previous EAP request found for state 0xb5449406bd368d00, released
> from the list
> (9) eap: Peer sent packet with method EAP PEAP (25)
> (9) eap: Calling submodule eap_peap to process data
> (9) eap_peap: Continuing EAP-TLS
> (9) eap_peap: [eaptls verify] = ok
> (9) eap_peap: Done initial handshake
> (9) eap_peap: [eaptls process] = ok
> (9) eap_peap: Session established. Decoding tunneled attributes
> (9) eap_peap: PEAP state send tlv failure
> (9) eap_peap: Received EAP-TLV response
> (9) eap_peap: ERROR: The users session was previously rejected:
> returning reject (again.)
> (9) eap_peap: This means you need to read the PREVIOUS messages in the
> debug output
> (9) eap_peap: to find out the reason why the user was rejected
> (9) eap_peap: Look for "reject" or "fail". Those earlier messages will
> tell you
> (9) eap_peap: what went wrong, and how to fix the problem
> (9) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module
> failed
> (9) eap: Sending EAP Failure (code 4) ID 114 length 4
> (9) eap: Failed in EAP select
> (9) [eap] = invalid
> (9) } # authenticate = invalid
> (9) Failed to authenticate the user
> (9) Using Post-Auth-Type Reject
> (9) # Executing group from file /etc/freeradius/sites-enabled/default
> (9) Post-Auth-Type REJECT {
> (9) attr_filter.access_reject: EXPAND %{User-Name}
> (9) attr_filter.access_reject: --> bchristopher848
> (9) attr_filter.access_reject: Matched entry DEFAULT at line 11
> (9) [attr_filter.access_reject] = updated
> (9) [eap] = noop
> (9) policy remove_reply_message_if_eap {
> (9) if (&reply:EAP-Message && &reply:Reply-Message) {
> (9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
> (9) else {
> (9) [noop] = noop
> (9) } # else = noop
> (9) } # policy remove_reply_message_if_eap = noop
> (9) } # Post-Auth-Type REJECT = updated
> (9) Delaying response for 1.000000 seconds
> Waking up in 0.3 seconds.
> Waking up in 0.6 seconds.
> (9) Sending delayed response
> (9) Sent Access-Reject Id 10 from 192.168.100.201:1812 to
> 192.168.100.113:34296 length 44
> (9) EAP-Message = 0x04720004
> (9) Message-Authenticator = 0x00000000000000000000000000000000
> Waking up in 1.6 seconds.
> (0) Cleaning up request packet ID 1 with timestamp +30
> (1) Cleaning up request packet ID 2 with timestamp +30
> (2) Cleaning up request packet ID 3 with timestamp +30
> (3) Cleaning up request packet ID 4 with timestamp +30
> (4) Cleaning up request packet ID 5 with timestamp +30
> (5) Cleaning up request packet ID 6 with timestamp +30
> Waking up in 2.2 seconds.
> (6) Cleaning up request packet ID 7 with timestamp +32
> (7) Cleaning up request packet ID 8 with timestamp +32
> (8) Cleaning up request packet ID 9 with timestamp +32
> (9) Cleaning up request packet ID 10 with timestamp +32
> Ready to process requests
> (10) Received Accounting-Request Id 1 from 192.168.100.115:52712 to
> 192.168.100.201:1813 length 90
> (10) Acct-Status-Type = Accounting-Off
> (10) Acct-Authentic = RADIUS
> (10) NAS-IP-Address = 10.0.148.205
> (10) NAS-Identifier = "802aa849cbcc"
> (10) Called-Station-Id = "80-2A-A8-4A-CB-CC:SeminaryWiFi"
> (10) Acct-Terminate-Cause = NAS-Reboot
> (10) # Executing section preacct from file /etc/freeradius/sites-enabled/
> default
> (10) preacct {
> (10) [preprocess] = ok
> (10) policy acct_unique {
> (10) update request {
> (10) &Tmp-String-9 := "ai:"
> (10) } # update request = noop
> (10) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
> ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) {
> (10) EXPAND %{hex:&Class}
> (10) -->
> (10) EXPAND ^%{hex:&Tmp-String-9}
> (10) --> ^61693a
> (10) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
> ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE
> (10) else {
> (10) update request {
> (10) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-
> Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}
> (10) --> 3fbd256e7d3667dda249cdebb204aa6c
> (10) &Acct-Unique-Session-Id := 3fbd256e7d3667dda249cdebb204aa6c
> (10) } # update request = noop
> (10) } # else = noop
> (10) } # policy acct_unique = noop
> (10) [suffix] = noop
> (10) [files] = noop
> (10) } # preacct = ok
> (10) # Executing section accounting from file
> /etc/freeradius/sites-enabled/default
> (10) accounting {
> (10) detail: EXPAND /var/log/freeradius/radacct/%{
> %{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d
> (10) detail: --> /var/log/freeradius/radacct/19
> 2.168.100.115/detail-20170905
> (10) detail: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{
> Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to
> /var/log/freeradius/radacct/192.168.100.115/detail-20170905
> (10) detail: EXPAND %t
> (10) detail: --> Tue Sep 5 22:05:39 2017
> (10) [detail] = ok
> (10) [unix] = noop
> (10) [exec] = noop
> (10) attr_filter.accounting_response: EXPAND %{User-Name}
> (10) attr_filter.accounting_response: -->
> (10) [attr_filter.accounting_response] = noop
> (10) } # accounting = ok
> (10) Sent Accounting-Response Id 1 from 192.168.100.201:1813 to
> 192.168.100.115:52712 length 0
> (10) Finished request
> (10) Cleaning up request packet ID 1 with timestamp +44
> Ready to process requests
> (11) Received Accounting-Request Id 1 from 192.168.100.115:41826 to
> 192.168.100.201:1813 length 90
> (11) Acct-Status-Type = Accounting-Off
> (11) Acct-Authentic = RADIUS
> (11) NAS-IP-Address = 10.0.148.205
> (11) NAS-Identifier = "802aa849cbcc"
> (11) Called-Station-Id = "82-2A-A8-4B-CB-CC:SeminaryWiFi"
> (11) Acct-Terminate-Cause = NAS-Reboot
> (11) # Executing section preacct from file /etc/freeradius/sites-enabled/
> default
> (11) preacct {
> (11) [preprocess] = ok
> (11) policy acct_unique {
> (11) update request {
> (11) &Tmp-String-9 := "ai:"
> (11) } # update request = noop
> (11) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
> ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) {
> (11) EXPAND %{hex:&Class}
> (11) -->
> (11) EXPAND ^%{hex:&Tmp-String-9}
> (11) --> ^61693a
> (11) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
> ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE
> (11) else {
> (11) update request {
> (11) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-
> Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}
> (11) --> 3fbd256e7d3667dda249cdebb204aa6c
> (11) &Acct-Unique-Session-Id := 3fbd256e7d3667dda249cdebb204aa6c
> (11) } # update request = noop
> (11) } # else = noop
> (11) } # policy acct_unique = noop
> (11) [suffix] = noop
> (11) [files] = noop
> (11) } # preacct = ok
> (11) # Executing section accounting from file
> /etc/freeradius/sites-enabled/default
> (11) accounting {
> (11) detail: EXPAND /var/log/freeradius/radacct/%{
> %{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d
> (11) detail: --> /var/log/freeradius/radacct/19
> 2.168.100.115/detail-20170905
> (11) detail: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{
> Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to
> /var/log/freeradius/radacct/192.168.100.115/detail-20170905
> (11) detail: EXPAND %t
> (11) detail: --> Tue Sep 5 22:05:40 2017
> (11) [detail] = ok
> (11) [unix] = noop
> (11) [exec] = noop
> (11) attr_filter.accounting_response: EXPAND %{User-Name}
> (11) attr_filter.accounting_response: -->
> (11) [attr_filter.accounting_response] = noop
> (11) } # accounting = ok
> (11) Sent Accounting-Response Id 1 from 192.168.100.201:1813 to
> 192.168.100.115:41826 length 0
> (11) Finished request
> (11) Cleaning up request packet ID 1 with timestamp +45
> Ready to process requests
>
>
>
>
>
> Matthew Pulis
> mobile / WhatsApp: +356 79539404 <+356%207953%209404>
>
>
>
More information about the Freeradius-Users
mailing list