Windows cannot authenticate with Freeradius
Matthew Pulis
mpulis at gmail.com
Wed Sep 6 14:51:33 CEST 2017
Dear Alan
So here the issue is Freeradius or Win 7? I am not quite well understanding
the log. If Win 10 and Android log in fine, I guess the issue is with Win 7
right? Or this has to do with setting up also MSCHAPv2 so Win7 can log in?
Sorry but am really stuck and not even sure what to search on Google in
order to get the help I need.
Apologies for the million and one questions.
Thanks for your support
Matthew Pulis
mobile / WhatsApp: +356 79539404
On 6 September 2017 at 10:09, Matthew Pulis <mpulis at gmail.com> wrote:
> Resending since the other one was rejected for being long. Apologies
>
> On 5 September 2017 at 22:19, Matthew Pulis <mpulis at gmail.com> wrote:
>
>> Dear all
>>
>> Many many thanks for your support. We are moving towards a complete
>> solution :)
>>
>> Windows 10 works fine without the need to install a certificate. The
>> certificates on the server were all expired so I renewed everything and Win
>> 10 worked out of the box - no need to install anything.
>>
>> Windows 7 is different. I pushed ca.der to the Win 7 client. Installed it
>> using cert util and double checked it via mmc.
>>
>> Before connecting this is the warning the network showed: The server
>> "The Seminary Local Certificate Authority" presented a valid certificate
>> issued by "The Seminary Local Certificate Authority", but "The Seminary
>> Local Certificate Authority" is not configured as a valid trust anchor for
>> this profile. Further, the server "The Seminary Local Certificate
>> Authority" is not configured as a valid NPS server to connect to for this
>> profile.
>>
>> It seems to be a problem with Win 7. Do you have any pointers? Should I
>> enable MSCHAPv2 too? or is there something for EAP please?
>>
>> Should something like this work: https://documentation.me
>> raki.com/MR/Encryption_and_Authentication/Enabling_EAP-TLS_in_Windows_7?
>>
>> Thanks a lot for your help and support!
>>
>> This is the full log
>>
>> radius at radius:~$ sudo freeradius -X
>> FreeRADIUS Version 3.0.15
>> Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
>> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
>> PARTICULAR PURPOSE
>> You may redistribute copies of FreeRADIUS under the terms of the
>> GNU General Public License
>> For more information about these matters, see the file named COPYRIGHT
>> Starting - reading configuration files ...
>> including dictionary file /usr/share/freeradius/dictionary
>> including dictionary file /usr/share/freeradius/dictionary.dhcp
>> including dictionary file /usr/share/freeradius/dictionary.vqp
>> including dictionary file /etc/freeradius/dictionary
>> including configuration file /etc/freeradius/radiusd.conf
>> including configuration file /etc/freeradius/proxy.conf
>> including configuration file /etc/freeradius/clients.conf
>> including files in directory /etc/freeradius/mods-enabled/
>> including configuration file /etc/freeradius/mods-enabled/mschap
>> including configuration file /etc/freeradius/mods-enabled/adldap
>> including configuration file /etc/freeradius/mods-enabled/always
>> including configuration file /etc/freeradius/mods-enabled/soh
>> including configuration file /etc/freeradius/mods-enabled/eap
>> including configuration file /etc/freeradius/mods-enabled/dynamic_clients
>> including configuration file /etc/freeradius/mods-enabled/logintime
>> including configuration file /etc/freeradius/mods-enabled/exec
>> including configuration file /etc/freeradius/mods-enabled/realm
>> including configuration file /etc/freeradius/mods-enabled/utf8
>> including configuration file /etc/freeradius/mods-enabled/date
>> including configuration file /etc/freeradius/mods-enabled/echo
>> including configuration file /etc/freeradius/mods-enabled/unix
>> including configuration file /etc/freeradius/mods-enabled/detail.log
>> including configuration file /etc/freeradius/mods-enabled/expr
>> including configuration file /etc/freeradius/mods-enabled/ntlm_auth
>> including configuration file /etc/freeradius/mods-enabled/pap
>> including configuration file /etc/freeradius/mods-enabled/ldap
>> including configuration file /etc/freeradius/mods-enabled/digest
>> including configuration file /etc/freeradius/mods-enabled/files
>> including configuration file /etc/freeradius/mods-enabled/preprocess
>> including configuration file /etc/freeradius/mods-enabled/cache_eap
>> including configuration file /etc/freeradius/mods-enabled/detail
>> including configuration file /etc/freeradius/mods-enabled/expiration
>> including configuration file /etc/freeradius/mods-enabled/chap
>> including configuration file /etc/freeradius/mods-enabled/sradutmp
>> including configuration file /etc/freeradius/mods-enabled/radutmp
>> including configuration file /etc/freeradius/mods-enabled/passwd
>> including configuration file /etc/freeradius/mods-enabled/linelog
>> including configuration file /etc/freeradius/mods-enabled/unpack
>> including configuration file /etc/freeradius/mods-enabled/attr_filter
>> including configuration file /etc/freeradius/mods-enabled/replicate
>> including files in directory /etc/freeradius/policy.d/
>> including configuration file /etc/freeradius/policy.d/filter
>> including configuration file /etc/freeradius/policy.d/control
>> including configuration file /etc/freeradius/policy.d/canonicalization
>> including configuration file /etc/freeradius/policy.d/eap
>> including configuration file /etc/freeradius/policy.d/debug
>> including configuration file /etc/freeradius/policy.d/dhcp
>> including configuration file /etc/freeradius/policy.d/moons
>> hot-targeted-ids
>> including configuration file /etc/freeradius/policy.d/accounting
>> including configuration file /etc/freeradius/policy.d/abfab-tr
>> including configuration file /etc/freeradius/policy.d/cui
>> including configuration file /etc/freeradius/policy.d/operator-name
>> including files in directory /etc/freeradius/sites-enabled/
>> including configuration file /etc/freeradius/sites-enabled/inner-tunnel
>> including configuration file /etc/freeradius/sites-enabled/default
>> main {
>> security {
>> user = "freerad"
>> group = "freerad"
>> allow_core_dumps = no
>> }
>> name = "freeradius"
>> prefix = "/usr"
>> localstatedir = "/var"
>> logdir = "/var/log/freeradius"
>> run_dir = "/var/run/freeradius"
>> }
>> main {
>> name = "freeradius"
>> prefix = "/usr"
>> localstatedir = "/var"
>> sbindir = "/usr/sbin"
>> logdir = "/var/log/freeradius"
>> run_dir = "/var/run/freeradius"
>> libdir = "/usr/lib/freeradius"
>> radacctdir = "/var/log/freeradius/radacct"
>> hostname_lookups = no
>> max_request_time = 30
>> cleanup_delay = 5
>> max_requests = 16384
>> pidfile = "/var/run/freeradius/freeradius.pid"
>> checkrad = "/usr/sbin/checkrad"
>> debug_level = 0
>> proxy_requests = yes
>> log {
>> stripped_names = no
>> auth = no
>> auth_badpass = no
>> auth_goodpass = no
>> colourise = yes
>> msg_denied = "You are already logged in - access denied"
>> }
>> resources {
>> }
>> security {
>> max_attributes = 200
>> reject_delay = 1.000000
>> status_server = yes
>> }
>> }
>> radiusd: #### Loading Realms and Home Servers ####
>> proxy server {
>> retry_delay = 5
>> retry_count = 3
>> default_fallback = no
>> dead_time = 120
>> wake_all_if_all_dead = no
>> }
>> home_server localhost {
>> ipaddr = 127.0.0.1
>> port = 1812
>> type = "auth"
>> secret = <<< secret >>>
>> response_window = 20.000000
>> response_timeouts = 1
>> max_outstanding = 65536
>> zombie_period = 40
>> status_check = "status-server"
>> ping_interval = 30
>> check_interval = 30
>> check_timeout = 4
>> num_answers_to_alive = 3
>> revive_interval = 120
>> limit {
>> max_connections = 16
>> max_requests = 0
>> lifetime = 0
>> idle_timeout = 0
>> }
>> coa {
>> irt = 2
>> mrt = 16
>> mrc = 5
>> mrd = 30
>> }
>> }
>> home_server_pool my_auth_failover {
>> type = fail-over
>> home_server = localhost
>> }
>> realm example.com {
>> auth_pool = my_auth_failover
>> }
>> realm LOCAL {
>> }
>> radiusd: #### Loading Clients ####
>> client localhost {
>> ipaddr = 127.0.0.1
>> require_message_authenticator = no
>> secret = <<< secret >>>
>> nas_type = "other"
>> proto = "*"
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> client localhost_ipv6 {
>> ipv6addr = ::1
>> require_message_authenticator = no
>> secret = <<< secret >>>
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> client 192.168.100.1/24 {
>> require_message_authenticator = no
>> secret = <<< secret >>>
>> shortname = "NAS"
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
>> 192.168.100.1/24. Please fix your configuration
>> Support for old-style clients will be removed in a future release
>> Debugger not attached
>> # Creating Auth-Type = eap
>> # Creating Auth-Type = PAP
>> # Creating Auth-Type = CHAP
>> # Creating Auth-Type = MS-CHAP
>> # Creating Auth-Type = digest
>> radiusd: #### Instantiating modules ####
>> modules {
>> # Loaded module rlm_mschap
>> # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
>> mschap {
>> use_mppe = yes
>> require_encryption = no
>> require_strong = no
>> with_ntdomain_hack = yes
>> passchange {
>> }
>> allow_retry = yes
>> winbind_retry_with_normalised_username = no
>> }
>> # Loaded module rlm_ldap
>> # Loading module "adldap" from file /etc/freeradius/mods-enabled/adldap
>> ldap adldap {
>> server = "localhost"
>> identity = "cn=admin,dc=seminary,dc=local"
>> password = <<< secret >>>
>> sasl {
>> }
>> user {
>> scope = "sub"
>> access_positive = yes
>> sasl {
>> }
>> }
>> group {
>> filter = "(objectClass=posixGroup)"
>> scope = "sub"
>> name_attribute = "cn"
>> membership_attribute = "memberOf"
>> cacheable_name = no
>> cacheable_dn = no
>> }
>> client {
>> filter = "(objectClass=radiusClient)"
>> scope = "sub"
>> base_dn = "ou=School,dc=seminary,dc=ad"
>> }
>> profile {
>> }
>> options {
>> ldap_debug = 40
>> chase_referrals = yes
>> rebind = yes
>> net_timeout = 1
>> res_timeout = 10
>> srv_timelimit = 3
>> idle = 60
>> probes = 3
>> interval = 3
>> }
>> tls {
>> start_tls = no
>> }
>> }
>> Creating attribute adldap-LDAP-Group
>> # Loaded module rlm_always
>> # Loading module "reject" from file /etc/freeradius/mods-enabled/always
>> always reject {
>> rcode = "reject"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "fail" from file /etc/freeradius/mods-enabled/always
>> always fail {
>> rcode = "fail"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "ok" from file /etc/freeradius/mods-enabled/always
>> always ok {
>> rcode = "ok"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "handled" from file /etc/freeradius/mods-enabled/a
>> lways
>> always handled {
>> rcode = "handled"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "invalid" from file /etc/freeradius/mods-enabled/a
>> lways
>> always invalid {
>> rcode = "invalid"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "userlock" from file /etc/freeradius/mods-enabled/a
>> lways
>> always userlock {
>> rcode = "userlock"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "notfound" from file /etc/freeradius/mods-enabled/a
>> lways
>> always notfound {
>> rcode = "notfound"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "noop" from file /etc/freeradius/mods-enabled/always
>> always noop {
>> rcode = "noop"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "updated" from file /etc/freeradius/mods-enabled/a
>> lways
>> always updated {
>> rcode = "updated"
>> simulcount = 0
>> mpp = no
>> }
>> # Loaded module rlm_soh
>> # Loading module "soh" from file /etc/freeradius/mods-enabled/soh
>> soh {
>> dhcp = yes
>> }
>> # Loaded module rlm_eap
>> # Loading module "eap" from file /etc/freeradius/mods-enabled/eap
>> eap {
>> default_eap_type = "ttls"
>> timer_expire = 60
>> ignore_unknown_eap_types = no
>> cisco_accounting_username_bug = no
>> max_sessions = 16384
>> }
>> # Loaded module rlm_dynamic_clients
>> # Loading module "dynamic_clients" from file
>> /etc/freeradius/mods-enabled/dynamic_clients
>> # Loaded module rlm_logintime
>> # Loading module "logintime" from file /etc/freeradius/mods-enabled/l
>> ogintime
>> logintime {
>> minimum_timeout = 60
>> }
>> # Loaded module rlm_exec
>> # Loading module "exec" from file /etc/freeradius/mods-enabled/exec
>> exec {
>> wait = no
>> input_pairs = "request"
>> shell_escape = yes
>> timeout = 10
>> }
>> # Loaded module rlm_realm
>> # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
>> realm IPASS {
>> format = "prefix"
>> delimiter = "/"
>> ignore_default = no
>> ignore_null = no
>> }
>> # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
>> realm suffix {
>> format = "suffix"
>> delimiter = "@"
>> ignore_default = no
>> ignore_null = no
>> }
>> # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/r
>> ealm
>> realm realmpercent {
>> format = "suffix"
>> delimiter = "%"
>> ignore_default = no
>> ignore_null = no
>> }
>> # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/r
>> ealm
>> realm ntdomain {
>> format = "prefix"
>> delimiter = "\\"
>> ignore_default = no
>> ignore_null = no
>> }
>> # Loaded module rlm_utf8
>> # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
>> # Loaded module rlm_date
>> # Loading module "date" from file /etc/freeradius/mods-enabled/date
>> date {
>> format = "%b %e %Y %H:%M:%S %Z"
>> utc = no
>> }
>> # Loading module "echo" from file /etc/freeradius/mods-enabled/echo
>> exec echo {
>> wait = yes
>> program = "/bin/echo %{User-Name}"
>> input_pairs = "request"
>> output_pairs = "reply"
>> shell_escape = yes
>> }
>> # Loaded module rlm_unix
>> # Loading module "unix" from file /etc/freeradius/mods-enabled/unix
>> unix {
>> radwtmp = "/var/log/freeradius/radwtmp"
>> }
>> Creating attribute Unix-Group
>> # Loaded module rlm_detail
>> # Loading module "auth_log" from file /etc/freeradius/mods-enabled/d
>> etail.log
>> detail auth_log {
>> filename = "/var/log/freeradius/radacct/%
>> {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-
>> detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> escape_filenames = no
>> log_packet_header = no
>> }
>> # Loading module "reply_log" from file /etc/freeradius/mods-enabled/d
>> etail.log
>> detail reply_log {
>> filename = "/var/log/freeradius/radacct/%
>> {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply
>> -detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> escape_filenames = no
>> log_packet_header = no
>> }
>> # Loading module "pre_proxy_log" from file
>> /etc/freeradius/mods-enabled/detail.log
>> detail pre_proxy_log {
>> filename = "/var/log/freeradius/radacct/%
>> {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-p
>> roxy-detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> escape_filenames = no
>> log_packet_header = no
>> }
>> # Loading module "post_proxy_log" from file
>> /etc/freeradius/mods-enabled/detail.log
>> detail post_proxy_log {
>> filename = "/var/log/freeradius/radacct/%
>> {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-
>> proxy-detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> escape_filenames = no
>> log_packet_header = no
>> }
>> # Loaded module rlm_expr
>> # Loading module "expr" from file /etc/freeradius/mods-enabled/expr
>> expr {
>> safe_characters = "@abcdefghijklmnopqrstuvwxyzAB
>> CDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆ
>> ÇÈÉÊËÎÏÔŒÙÛÜŸ"
>> }
>> # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/n
>> tlm_auth
>> exec ntlm_auth {
>> wait = yes
>> program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
>> --username=%{mschap:User-Name} --password=%{User-Password}"
>> shell_escape = yes
>> }
>> # Loaded module rlm_pap
>> # Loading module "pap" from file /etc/freeradius/mods-enabled/pap
>> pap {
>> normalise = yes
>> }
>> # Loading module "ldap" from file /etc/freeradius/mods-enabled/ldap
>> ldap {
>> server = "localhost"
>> identity = "cn=admin,dc=seminary,dc=local"
>> password = <<< secret >>>
>> sasl {
>> }
>> user {
>> scope = "sub"
>> access_positive = yes
>> sasl {
>> }
>> }
>> group {
>> filter = "(objectClass=posixGroup)"
>> scope = "sub"
>> name_attribute = "cn"
>> membership_attribute = "memberOf"
>> cacheable_name = no
>> cacheable_dn = no
>> }
>> client {
>> filter = "(objectClass=radiusClient)"
>> scope = "sub"
>> base_dn = "ou=SeminaryOU,dc=seminary,dc=local"
>> }
>> profile {
>> }
>> options {
>> ldap_debug = 40
>> chase_referrals = yes
>> rebind = yes
>> net_timeout = 1
>> res_timeout = 10
>> srv_timelimit = 3
>> idle = 60
>> probes = 3
>> interval = 3
>> }
>> tls {
>> start_tls = no
>> }
>> }
>> Creating attribute LDAP-Group
>> # Loaded module rlm_digest
>> # Loading module "digest" from file /etc/freeradius/mods-enabled/digest
>> # Loaded module rlm_files
>> # Loading module "files" from file /etc/freeradius/mods-enabled/files
>> files {
>> filename = "/etc/freeradius/mods-config/files/authorize"
>> acctusersfile = "/etc/freeradius/mods-config/files/accounting"
>> preproxy_usersfile = "/etc/freeradius/mods-config/f
>> iles/pre-proxy"
>> }
>> # Loaded module rlm_preprocess
>> # Loading module "preprocess" from file /etc/freeradius/mods-enabled/p
>> reprocess
>> preprocess {
>> huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
>> hints = "/etc/freeradius/mods-config/preprocess/hints"
>> with_ascend_hack = no
>> ascend_channels_per_line = 23
>> with_ntdomain_hack = no
>> with_specialix_jetstream_hack = no
>> with_cisco_vsa_hack = no
>> with_alvarion_vsa_hack = no
>> }
>> # Loaded module rlm_cache
>> # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/c
>> ache_eap
>> cache cache_eap {
>> driver = "rlm_cache_rbtree"
>> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
>> ttl = 15
>> max_entries = 0
>> epoch = 0
>> add_stats = no
>> }
>> # Loading module "detail" from file /etc/freeradius/mods-enabled/detail
>> detail {
>> filename = "/var/log/freeradius/radacct/%
>> {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> escape_filenames = no
>> log_packet_header = no
>> }
>> # Loaded module rlm_expiration
>> # Loading module "expiration" from file /etc/freeradius/mods-enabled/e
>> xpiration
>> # Loaded module rlm_chap
>> # Loading module "chap" from file /etc/freeradius/mods-enabled/chap
>> # Loaded module rlm_radutmp
>> # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/s
>> radutmp
>> radutmp sradutmp {
>> filename = "/var/log/freeradius/sradutmp"
>> username = "%{User-Name}"
>> case_sensitive = yes
>> check_with_nas = yes
>> permissions = 420
>> caller_id = no
>> }
>> # Loading module "radutmp" from file /etc/freeradius/mods-enabled/r
>> adutmp
>> radutmp {
>> filename = "/var/log/freeradius/radutmp"
>> username = "%{User-Name}"
>> case_sensitive = yes
>> check_with_nas = yes
>> permissions = 384
>> caller_id = yes
>> }
>> # Loaded module rlm_passwd
>> # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/p
>> asswd
>> passwd etc_passwd {
>> filename = "/etc/passwd"
>> format = "*User-Name:Crypt-Password:"
>> delimiter = ":"
>> ignore_nislike = no
>> ignore_empty = yes
>> allow_multiple_keys = no
>> hash_size = 100
>> }
>> # Loaded module rlm_linelog
>> # Loading module "linelog" from file /etc/freeradius/mods-enabled/l
>> inelog
>> linelog {
>> filename = "/var/log/freeradius/linelog"
>> escape_filenames = no
>> syslog_severity = "info"
>> permissions = 384
>> format = "This is a log message for %{User-Name}"
>> reference = "messages.%{%{reply:Packet-Type}:-default}"
>> }
>> # Loading module "log_accounting" from file
>> /etc/freeradius/mods-enabled/linelog
>> linelog log_accounting {
>> filename = "/var/log/freeradius/linelog-accounting"
>> escape_filenames = no
>> syslog_severity = "info"
>> permissions = 384
>> format = ""
>> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
>> }
>> # Loaded module rlm_unpack
>> # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
>> # Loaded module rlm_attr_filter
>> # Loading module "attr_filter.post-proxy" from file
>> /etc/freeradius/mods-enabled/attr_filter
>> attr_filter attr_filter.post-proxy {
>> filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
>> key = "%{Realm}"
>> relaxed = no
>> }
>> # Loading module "attr_filter.pre-proxy" from file
>> /etc/freeradius/mods-enabled/attr_filter
>> attr_filter attr_filter.pre-proxy {
>> filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
>> key = "%{Realm}"
>> relaxed = no
>> }
>> # Loading module "attr_filter.access_reject" from file
>> /etc/freeradius/mods-enabled/attr_filter
>> attr_filter attr_filter.access_reject {
>> filename = "/etc/freeradius/mods-config/a
>> ttr_filter/access_reject"
>> key = "%{User-Name}"
>> relaxed = no
>> }
>> # Loading module "attr_filter.access_challenge" from file
>> /etc/freeradius/mods-enabled/attr_filter
>> attr_filter attr_filter.access_challenge {
>> filename = "/etc/freeradius/mods-config/a
>> ttr_filter/access_challenge"
>> key = "%{User-Name}"
>> relaxed = no
>> }
>> # Loading module "attr_filter.accounting_response" from file
>> /etc/freeradius/mods-enabled/attr_filter
>> attr_filter attr_filter.accounting_response {
>> filename = "/etc/freeradius/mods-config/a
>> ttr_filter/accounting_response"
>> key = "%{User-Name}"
>> relaxed = no
>> }
>> # Loaded module rlm_replicate
>> # Loading module "replicate" from file /etc/freeradius/mods-enabled/r
>> eplicate
>> instantiate {
>> }
>> # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/m
>> schap
>> rlm_mschap (mschap): using internal authentication
>> # Instantiating module "adldap" from file /etc/freeradius/mods-enabled/a
>> dldap
>> rlm_ldap: libldap vendor: OpenLDAP, version: 20442
>> accounting {
>> reference = "%{tolower:type.%{Acct-Status-Type}}"
>> }
>> post-auth {
>> reference = "."
>> }
>> rlm_ldap (adldap): Initialising connection pool
>> pool {
>> start = 5
>> min = 3
>> max = 32
>> spare = 10
>> uses = 0
>> lifetime = 0
>> cleanup_interval = 30
>> idle_timeout = 60
>> retry_delay = 30
>> spread = no
>> }
>> rlm_ldap (adldap): Opening additional connection (0), 1 of 32 pending
>> slots used
>> rlm_ldap (adldap): Connecting to ldap://localhost:389
>> rlm_ldap (adldap): Waiting for bind result...
>> rlm_ldap (adldap): Bind successful
>> rlm_ldap (adldap): Opening additional connection (1), 1 of 31 pending
>> slots used
>> rlm_ldap (adldap): Connecting to ldap://localhost:389
>> rlm_ldap (adldap): Waiting for bind result...
>> rlm_ldap (adldap): Bind successful
>> rlm_ldap (adldap): Opening additional connection (2), 1 of 30 pending
>> slots used
>> rlm_ldap (adldap): Connecting to ldap://localhost:389
>> rlm_ldap (adldap): Waiting for bind result...
>> rlm_ldap (adldap): Bind successful
>> rlm_ldap (adldap): Opening additional connection (3), 1 of 29 pending
>> slots used
>> rlm_ldap (adldap): Connecting to ldap://localhost:389
>> rlm_ldap (adldap): Waiting for bind result...
>> rlm_ldap (adldap): Bind successful
>> rlm_ldap (adldap): Opening additional connection (4), 1 of 28 pending
>> slots used
>> rlm_ldap (adldap): Connecting to ldap://localhost:389
>> rlm_ldap (adldap): Waiting for bind result...
>> rlm_ldap (adldap): Bind successful
>> # Instantiating module "reject" from file /etc/freeradius/mods-enabled/a
>> lways
>> # Instantiating module "fail" from file /etc/freeradius/mods-enabled/a
>> lways
>> # Instantiating module "ok" from file /etc/freeradius/mods-enabled/a
>> lways
>> # Instantiating module "handled" from file
>> /etc/freeradius/mods-enabled/always
>> # Instantiating module "invalid" from file
>> /etc/freeradius/mods-enabled/always
>> # Instantiating module "userlock" from file
>> /etc/freeradius/mods-enabled/always
>> # Instantiating module "notfound" from file
>> /etc/freeradius/mods-enabled/always
>> # Instantiating module "noop" from file /etc/freeradius/mods-enabled/a
>> lways
>> # Instantiating module "updated" from file
>> /etc/freeradius/mods-enabled/always
>> # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
>> # Linked to sub-module rlm_eap_md5
>> # Linked to sub-module rlm_eap_leap
>> # Linked to sub-module rlm_eap_gtc
>> gtc {
>> challenge = "Password: "
>> auth_type = "PAP"
>> }
>> # Linked to sub-module rlm_eap_tls
>> tls {
>> tls = "tls-common"
>> }
>> tls-config tls-common {
>> verify_depth = 0
>> ca_path = "/etc/freeradius/certs"
>> pem_file_type = yes
>> private_key_file = "/etc/freeradius/certs/server.pem"
>> certificate_file = "/etc/freeradius/certs/server.pem"
>> ca_file = "/etc/freeradius/certs/ca.pem"
>> private_key_password = <<< secret >>>
>> dh_file = "/etc/freeradius/certs/dh"
>> random_file = "/dev/urandom"
>> fragment_size = 1024
>> include_length = yes
>> auto_chain = yes
>> check_crl = no
>> check_all_crl = no
>> cipher_list = "DEFAULT"
>> ecdh_curve = "prime256v1"
>> cache {
>> enable = yes
>> lifetime = 24
>> max_entries = 255
>> }
>> verify {
>> skip_if_ocsp_ok = no
>> }
>> ocsp {
>> enable = no
>> override_cert_url = yes
>> url = "http://127.0.0.1/ocsp/"
>> use_nonce = yes
>> timeout = 0
>> softfail = no
>> }
>> }
>> # Linked to sub-module rlm_eap_ttls
>> ttls {
>> tls = "tls-common"
>> default_eap_type = "md5"
>> copy_request_to_tunnel = no
>> use_tunneled_reply = yes
>> virtual_server = "inner-tunnel"
>> include_length = yes
>> require_client_cert = no
>> }
>> tls: Using cached TLS configuration from previous invocation
>> # Linked to sub-module rlm_eap_peap
>> peap {
>> tls = "tls-common"
>> default_eap_type = "mschapv2"
>> copy_request_to_tunnel = no
>> use_tunneled_reply = yes
>> proxy_tunneled_request_as_eap = yes
>> virtual_server = "inner-tunnel"
>> soh = no
>> require_client_cert = no
>> }
>> tls: Using cached TLS configuration from previous invocation
>> # Linked to sub-module rlm_eap_mschapv2
>> mschapv2 {
>> with_ntdomain_hack = no
>> send_error = no
>> }
>> # Instantiating module "logintime" from file
>> /etc/freeradius/mods-enabled/logintime
>> # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/r
>> ealm
>> # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/r
>> ealm
>> # Instantiating module "realmpercent" from file
>> /etc/freeradius/mods-enabled/realm
>> # Instantiating module "ntdomain" from file
>> /etc/freeradius/mods-enabled/realm
>> # Instantiating module "auth_log" from file
>> /etc/freeradius/mods-enabled/detail.log
>> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
>> detail output
>> # Instantiating module "reply_log" from file
>> /etc/freeradius/mods-enabled/detail.log
>> # Instantiating module "pre_proxy_log" from file
>> /etc/freeradius/mods-enabled/detail.log
>> # Instantiating module "post_proxy_log" from file
>> /etc/freeradius/mods-enabled/detail.log
>> # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
>> # Instantiating module "ldap" from file /etc/freeradius/mods-enabled/l
>> dap
>> accounting {
>> reference = "%{tolower:type.%{Acct-Status-Type}}"
>> }
>> post-auth {
>> reference = "."
>> }
>> rlm_ldap (ldap): Initialising connection pool
>> pool {
>> start = 5
>> min = 3
>> max = 32
>> spare = 10
>> uses = 0
>> lifetime = 0
>> cleanup_interval = 30
>> idle_timeout = 60
>> retry_delay = 30
>> spread = no
>> }
>> rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots
>> used
>> rlm_ldap (ldap): Connecting to ldap://localhost:389
>> rlm_ldap (ldap): Waiting for bind result...
>> rlm_ldap (ldap): Bind successful
>> rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots
>> used
>> rlm_ldap (ldap): Connecting to ldap://localhost:389
>> rlm_ldap (ldap): Waiting for bind result...
>> rlm_ldap (ldap): Bind successful
>> rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots
>> used
>> rlm_ldap (ldap): Connecting to ldap://localhost:389
>> rlm_ldap (ldap): Waiting for bind result...
>> rlm_ldap (ldap): Bind successful
>> rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots
>> used
>> rlm_ldap (ldap): Connecting to ldap://localhost:389
>> rlm_ldap (ldap): Waiting for bind result...
>> rlm_ldap (ldap): Bind successful
>> rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots
>> used
>> rlm_ldap (ldap): Connecting to ldap://localhost:389
>> rlm_ldap (ldap): Waiting for bind result...
>> rlm_ldap (ldap): Bind successful
>> # Instantiating module "files" from file /etc/freeradius/mods-enabled/f
>> iles
>> reading pairlist file /etc/freeradius/mods-config/files/authorize
>> reading pairlist file /etc/freeradius/mods-config/files/accounting
>> reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
>> # Instantiating module "preprocess" from file
>> /etc/freeradius/mods-enabled/preprocess
>> reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
>> reading pairlist file /etc/freeradius/mods-config/preprocess/hints
>> # Instantiating module "cache_eap" from file
>> /etc/freeradius/mods-enabled/cache_eap
>> rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
>> loaded and linked
>> # Instantiating module "detail" from file /etc/freeradius/mods-enabled/d
>> etail
>> # Instantiating module "expiration" from file
>> /etc/freeradius/mods-enabled/expiration
>> # Instantiating module "etc_passwd" from file
>> /etc/freeradius/mods-enabled/passwd
>> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
>> # Instantiating module "linelog" from file
>> /etc/freeradius/mods-enabled/linelog
>> # Instantiating module "log_accounting" from file
>> /etc/freeradius/mods-enabled/linelog
>> # Instantiating module "attr_filter.post-proxy" from file
>> /etc/freeradius/mods-enabled/attr_filter
>> reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
>> # Instantiating module "attr_filter.pre-proxy" from file
>> /etc/freeradius/mods-enabled/attr_filter
>> reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
>> # Instantiating module "attr_filter.access_reject" from file
>> /etc/freeradius/mods-enabled/attr_filter
>> reading pairlist file /etc/freeradius/mods-config/at
>> tr_filter/access_reject
>> [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item
>> "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
>> [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item
>> "FreeRADIUS-Response-Delay-USec" found in filter list for realm
>> "DEFAULT".
>> # Instantiating module "attr_filter.access_challenge" from file
>> /etc/freeradius/mods-enabled/attr_filter
>> reading pairlist file /etc/freeradius/mods-config/at
>> tr_filter/access_challenge
>> # Instantiating module "attr_filter.accounting_response" from file
>> /etc/freeradius/mods-enabled/attr_filter
>> reading pairlist file /etc/freeradius/mods-config/at
>> tr_filter/accounting_response
>> } # modules
>> radiusd: #### Loading Virtual Servers ####
>> server { # from file /etc/freeradius/radiusd.conf
>> } # server
>> server inner-tunnel { # from file /etc/freeradius/sites-enabled/
>> inner-tunnel
>> # Loading authenticate {...}
>> # Loading authorize {...}
>> # Loading session {...}
>> # Loading post-proxy {...}
>> # Loading post-auth {...}
>> Ignoring "sql" (see raddb/mods-available/README.rst)
>> } # server inner-tunnel
>> server default { # from file /etc/freeradius/sites-enabled/default
>> # Loading authenticate {...}
>> # Loading authorize {...}
>> # Loading preacct {...}
>> # Loading accounting {...}
>> # Loading post-proxy {...}
>> # Loading post-auth {...}
>> } # server default
>> radiusd: #### Opening IP addresses and Ports ####
>> listen {
>> type = "auth"
>> ipaddr = 127.0.0.1
>> port = 18120
>> }
>> listen {
>> type = "auth"
>> ipaddr = *
>> port = 0
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> listen {
>> type = "acct"
>> ipaddr = *
>> port = 0
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> listen {
>> type = "auth"
>> ipv6addr = ::
>> port = 0
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> listen {
>> type = "acct"
>> ipv6addr = ::
>> port = 0
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> Listening on auth address 127.0.0.1 port 18120 bound to server
>> inner-tunnel
>> Listening on auth address * port 1812 bound to server default
>> Listening on acct address * port 1813 bound to server default
>> Listening on auth address :: port 1812 bound to server default
>> Listening on acct address :: port 1813 bound to server default
>> Listening on proxy address * port 37387
>> Listening on proxy address :: port 45616
>> Ready to process requests
>>
>>
>>
>>
>>
>>
>> TRYING TO LOG IN FROM WINDOWS 7
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> (0) Received Access-Request Id 1 from 192.168.100.113:34296 to
>> 192.168.100.201:1812 length 189
>> (0) User-Name = "bchristopher848"
>> (0) NAS-IP-Address = 10.0.150.19
>> (0) NAS-Identifier = "802aa849d031"
>> (0) NAS-Port = 0
>> (0) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
>> (0) Calling-Station-Id = "00-22-FB-6E-1D-C8"
>> (0) Framed-MTU = 1400
>> (0) NAS-Port-Type = Wireless-802.11
>> (0) Connect-Info = "CONNECT 0Mbps 802.11b"
>> (0) EAP-Message = 0x0269001401626368726973746f70686572383438
>> (0) Message-Authenticator = 0x60dc6e98028e3f9af87c442e20dbd98b
>> (0) # Executing section authorize from file /etc/freeradius/sites-enabled/
>> default
>> (0) authorize {
>> (0) policy filter_username {
>> (0) if (&User-Name) {
>> (0) if (&User-Name) -> TRUE
>> (0) if (&User-Name) {
>> (0) if (&User-Name =~ /@[^@]*@/ ) {
>> (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>> (0) if (&User-Name =~ /\.\./ ) {
>> (0) if (&User-Name =~ /\.\./ ) -> FALSE
>> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
>> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>> -> FALSE
>> (0) if (&User-Name =~ /\.$/) {
>> (0) if (&User-Name =~ /\.$/) -> FALSE
>> (0) if (&User-Name =~ /@\./) {
>> (0) if (&User-Name =~ /@\./) -> FALSE
>> (0) } # if (&User-Name) = notfound
>> (0) } # policy filter_username = notfound
>> (0) [preprocess] = ok
>> (0) [chap] = noop
>> (0) [mschap] = noop
>> (0) suffix: Checking for suffix after "@"
>> (0) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
>> (0) suffix: No such realm "NULL"
>> (0) [suffix] = noop
>> (0) eap: Peer sent EAP Response (code 2) ID 105 length 20
>> (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
>> rest of authorize
>> (0) [eap] = ok
>> (0) } # authorize = ok
>> (0) Found Auth-Type = eap
>> (0) # Executing group from file /etc/freeradius/sites-enabled/default
>> (0) authenticate {
>> (0) eap: Peer sent packet with method EAP Identity (1)
>> (0) eap: Calling submodule eap_ttls to process data
>> (0) eap_ttls: Initiating new EAP-TLS session
>> (0) eap_ttls: Flushing SSL sessions (of #0)
>> (0) eap_ttls: [eaptls start] = request
>> (0) eap: Sending EAP Request (code 1) ID 106 length 6
>> (0) eap: EAP session adding &reply:State = 0xb5449406b52e8100
>> (0) [eap] = handled
>> (0) } # authenticate = handled
>> (0) Using Post-Auth-Type Challenge
>> (0) Post-Auth-Type sub-section not found. Ignoring.
>> (0) # Executing group from file /etc/freeradius/sites-enabled/default
>> (0) Sent Access-Challenge Id 1 from 192.168.100.201:1812 to
>> 192.168.100.113:34296 length 0
>> (0) EAP-Message = 0x016a00061520
>> (0) Message-Authenticator = 0x00000000000000000000000000000000
>> (0) State = 0xb5449406b52e81001eb003264d869845
>> (0) Finished request
>> Waking up in 4.9 seconds.
>> (1) Received Access-Request Id 2 from 192.168.100.113:34296 to
>> 192.168.100.201:1812 length 193
>> (1) User-Name = "bchristopher848"
>> (1) NAS-IP-Address = 10.0.150.19
>> (1) NAS-Identifier = "802aa849d031"
>> (1) NAS-Port = 0
>> (1) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
>> (1) Calling-Station-Id = "00-22-FB-6E-1D-C8"
>> (1) Framed-MTU = 1400
>> (1) NAS-Port-Type = Wireless-802.11
>> (1) Connect-Info = "CONNECT 0Mbps 802.11b"
>> (1) EAP-Message = 0x026a00060319
>> (1) State = 0xb5449406b52e81001eb003264d869845
>> (1) Message-Authenticator = 0x9229ace477f82c7e771de427669cfad1
>> (1) session-state: No cached attributes
>> (1) # Executing section authorize from file /etc/freeradius/sites-enabled/
>> default
>> (1) authorize {
>> (1) policy filter_username {
>> (1) if (&User-Name) {
>> (1) if (&User-Name) -> TRUE
>> (1) if (&User-Name) {
>> (1) if (&User-Name =~ /@[^@]*@/ ) {
>> (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>> (1) if (&User-Name =~ /\.\./ ) {
>> (1) if (&User-Name =~ /\.\./ ) -> FALSE
>> (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
>> (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>> -> FALSE
>> (1) if (&User-Name =~ /\.$/) {
>> (1) if (&User-Name =~ /\.$/) -> FALSE
>> (1) if (&User-Name =~ /@\./) {
>> (1) if (&User-Name =~ /@\./) -> FALSE
>> (1) } # if (&User-Name) = notfound
>> (1) } # policy filter_username = notfound
>> (1) [preprocess] = ok
>> (1) [chap] = noop
>> (1) [mschap] = noop
>> (1) suffix: Checking for suffix after "@"
>> (1) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
>> (1) suffix: No such realm "NULL"
>> (1) [suffix] = noop
>> (1) eap: Peer sent EAP Response (code 2) ID 106 length 6
>> (1) eap: No EAP Start, assuming it's an on-going EAP conversation
>> (1) [eap] = updated
>> (1) [files] = noop
>> rlm_ldap (ldap): Reserved connection (0)
>> (1) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
>> (1) ldap: --> (cn=bchristopher848)
>> (1) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with
>> filter "(cn=bchristopher848)", scope "sub"
>> (1) ldap: Waiting for search result...
>> (1) ldap: User object found at DN "cn=bchristopher848,cn=Seminar
>> ians,ou=SeminaryOU,dc=seminary,dc=local"
>> (1) ldap: Processing user attributes
>> (1) ldap: control:Password-With-Header += '{ssha}o1fjrtGMqroWxrIgC8G/jwK
>> 8GK5BxvANe+pK7w=='
>> rlm_ldap (ldap): Released connection (0)
>> Need 5 more connections to reach 10 spares
>> rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots
>> used
>> rlm_ldap (ldap): Connecting to ldap://localhost:389
>> rlm_ldap (ldap): Waiting for bind result...
>> rlm_ldap (ldap): Bind successful
>> (1) [ldap] = updated
>> rlm_ldap (adldap): Reserved connection (0)
>> (1) adldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
>> (1) adldap: --> (cn=bchristopher848)
>> (1) adldap: Performing search in "ou=School,dc=seminary,dc=ad" with
>> filter "(cn=bchristopher848)", scope "sub"
>> (1) adldap: Waiting for search result...
>> (1) adldap: The specified DN wasn't found
>> (1) adldap: Search returned no results
>> rlm_ldap (adldap): Released connection (0)
>> Need 5 more connections to reach 10 spares
>> rlm_ldap (adldap): Opening additional connection (5), 1 of 27 pending
>> slots used
>> rlm_ldap (adldap): Connecting to ldap://localhost:389
>> rlm_ldap (adldap): Waiting for bind result...
>> rlm_ldap (adldap): Bind successful
>> (1) [adldap] = notfound
>> (1) [expiration] = noop
>> (1) [logintime] = noop
>> (1) pap: Converted: &control:Password-With-Header ->
>> &control:SSHA1-Password
>> (1) pap: Removing &control:Password-With-Header
>> (1) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28
>> bytes
>> (1) pap: WARNING: Auth-Type already set. Not setting to PAP
>> (1) [pap] = noop
>> (1) } # authorize = updated
>> (1) Found Auth-Type = eap
>> (1) # Executing group from file /etc/freeradius/sites-enabled/default
>> (1) authenticate {
>> (1) eap: Expiring EAP session with state 0xb5449406b52e8100
>> (1) eap: Finished EAP session with state 0xb5449406b52e8100
>> (1) eap: Previous EAP request found for state 0xb5449406b52e8100,
>> released from the list
>> (1) eap: Peer sent packet with method EAP NAK (3)
>> (1) eap: Found mutually acceptable type PEAP (25)
>> (1) eap: Calling submodule eap_peap to process data
>> (1) eap_peap: Initiating new EAP-TLS session
>> (1) eap_peap: [eaptls start] = request
>> (1) eap: Sending EAP Request (code 1) ID 107 length 6
>> (1) eap: EAP session adding &reply:State = 0xb5449406b42f8d00
>> (1) [eap] = handled
>> (1) } # authenticate = handled
>> (1) Using Post-Auth-Type Challenge
>> (1) Post-Auth-Type sub-section not found. Ignoring.
>> (1) # Executing group from file /etc/freeradius/sites-enabled/default
>> (1) Sent Access-Challenge Id 2 from 192.168.100.201:1812 to
>> 192.168.100.113:34296 length 0
>> (1) EAP-Message = 0x016b00061920
>> (1) Message-Authenticator = 0x00000000000000000000000000000000
>> (1) State = 0xb5449406b42f8d001eb003264d869845
>> (1) Finished request
>> Waking up in 4.9 seconds.
>> (2) Received Access-Request Id 3 from 192.168.100.113:34296 to
>> 192.168.100.201:1812 length 300
>> (2) User-Name = "bchristopher848"
>> (2) NAS-IP-Address = 10.0.150.19
>> (2) NAS-Identifier = "802aa849d031"
>> (2) NAS-Port = 0
>> (2) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
>> (2) Calling-Station-Id = "00-22-FB-6E-1D-C8"
>> (2) Framed-MTU = 1400
>> (2) NAS-Port-Type = Wireless-802.11
>> (2) Connect-Info = "CONNECT 0Mbps 802.11b"
>> (2) EAP-Message = 0x026b007119800000006716030100
>> 620100005e030159af03804becec9c3cef8903818c79121606d4cc4552b8
>> 68a83f76270fc4ef9200001cc014c013003900330035002fc00ac0090038
>> 0032000a00130005000401000019000a0006000400170018000b00020100
>> 00170000ff01000100
>> (2) State = 0xb5449406b42f8d001eb003264d869845
>> (2) Message-Authenticator = 0x03f782e6095d0d07dc5d1122f1876d00
>> (2) session-state: No cached attributes
>> (2) # Executing section authorize from file /etc/freeradius/sites-enabled/
>> default
>> (2) authorize {
>> (2) policy filter_username {
>> (2) if (&User-Name) {
>> (2) if (&User-Name) -> TRUE
>> (2) if (&User-Name) {
>> (2) if (&User-Name =~ /@[^@]*@/ ) {
>> (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>> (2) if (&User-Name =~ /\.\./ ) {
>> (2) if (&User-Name =~ /\.\./ ) -> FALSE
>> (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
>> (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>> -> FALSE
>> (2) if (&User-Name =~ /\.$/) {
>> (2) if (&User-Name =~ /\.$/) -> FALSE
>> (2) if (&User-Name =~ /@\./) {
>> (2) if (&User-Name =~ /@\./) -> FALSE
>> (2) } # if (&User-Name) = notfound
>> (2) } # policy filter_username = notfound
>> (2) [preprocess] = ok
>> (2) [chap] = noop
>> (2) [mschap] = noop
>> (2) suffix: Checking for suffix after "@"
>> (2) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
>> (2) suffix: No such realm "NULL"
>> (2) [suffix] = noop
>> (2) eap: Peer sent EAP Response (code 2) ID 107 length 113
>> (2) eap: Continuing tunnel setup
>> (2) [eap] = ok
>> (2) } # authorize = ok
>> (2) Found Auth-Type = eap
>> (2) # Executing group from file /etc/freeradius/sites-enabled/default
>> (2) authenticate {
>> (2) eap: Expiring EAP session with state 0xb5449406b42f8d00
>> (2) eap: Finished EAP session with state 0xb5449406b42f8d00
>> (2) eap: Previous EAP request found for state 0xb5449406b42f8d00,
>> released from the list
>> (2) eap: Peer sent packet with method EAP PEAP (25)
>> (2) eap: Calling submodule eap_peap to process data
>> (2) eap_peap: Continuing EAP-TLS
>> (2) eap_peap: Peer indicated complete TLS record size will be 103 bytes
>> (2) eap_peap: Got complete TLS record (103 bytes)
>> (2) eap_peap: [eaptls verify] = length included
>> (2) eap_peap: (other): before/accept initialization
>> (2) eap_peap: TLS_accept: before/accept initialization
>> (2) eap_peap: <<< recv TLS 1.0 Handshake [length 0062], ClientHello
>> (2) eap_peap: TLS_accept: unknown state
>> (2) eap_peap: >>> send TLS 1.0 Handshake [length 0059], ServerHello
>> (2) eap_peap: TLS_accept: unknown state
>> (2) eap_peap: >>> send TLS 1.0 Handshake [length 0982], Certificate
>> (2) eap_peap: TLS_accept: unknown state
>> (2) eap_peap: >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange
>> (2) eap_peap: TLS_accept: unknown state
>> (2) eap_peap: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone
>> (2) eap_peap: TLS_accept: unknown state
>> (2) eap_peap: TLS_accept: unknown state
>> (2) eap_peap: TLS_accept: unknown state
>> (2) eap_peap: TLS_accept: Need to read more data: unknown state
>> (2) eap_peap: TLS_accept: Need to read more data: unknown state
>> (2) eap_peap: In SSL Handshake Phase
>> (2) eap_peap: In SSL Accept mode
>> (2) eap_peap: [eaptls process] = handled
>> (2) eap: Sending EAP Request (code 1) ID 108 length 1004
>> (2) eap: EAP session adding &reply:State = 0xb5449406b7288d00
>> (2) [eap] = handled
>> (2) } # authenticate = handled
>> (2) Using Post-Auth-Type Challenge
>> (2) Post-Auth-Type sub-section not found. Ignoring.
>> (2) # Executing group from file /etc/freeradius/sites-enabled/default
>> (2) Sent Access-Challenge Id 3 from 192.168.100.201:1812 to
>> 192.168.100.113:34296 length 0
>> (2) EAP-Message = 0x016c03ec19c000000b3e16030100
>> 5902000055030198325853d6a4ea0a8a0ddc62e8252c55dce33ce836984b
>> 265c5d4a2663c775ad20a5464acc7366d8b86f656371288daf4a0e68ce7f
>> 820f064ff457b9622cb4e509c01400000dff01000100000b000403000102
>> 16030109820b00097e00097b000426
>> (2) Message-Authenticator = 0x00000000000000000000000000000000
>> (2) State = 0xb5449406b7288d001eb003264d869845
>> (2) Finished request
>> Waking up in 4.9 seconds.
>> (3) Received Access-Request Id 4 from 192.168.100.113:34296 to
>> 192.168.100.201:1812 length 193
>> (3) User-Name = "bchristopher848"
>> (3) NAS-IP-Address = 10.0.150.19
>> (3) NAS-Identifier = "802aa849d031"
>> (3) NAS-Port = 0
>> (3) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
>> (3) Calling-Station-Id = "00-22-FB-6E-1D-C8"
>> (3) Framed-MTU = 1400
>> (3) NAS-Port-Type = Wireless-802.11
>> (3) Connect-Info = "CONNECT 0Mbps 802.11b"
>> (3) EAP-Message = 0x026c00061900
>> (3) State = 0xb5449406b7288d001eb003264d869845
>> (3) Message-Authenticator = 0xe754c603a90fd754f21a295dadc62814
>> (3) session-state: No cached attributes
>> (3) # Executing section authorize from file /etc/freeradius/sites-enabled/
>> default
>> (3) authorize {
>> (3) policy filter_username {
>> (3) if (&User-Name) {
>> (3) if (&User-Name) -> TRUE
>> (3) if (&User-Name) {
>> (3) if (&User-Name =~ /@[^@]*@/ ) {
>> (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>> (3) if (&User-Name =~ /\.\./ ) {
>> (3) if (&User-Name =~ /\.\./ ) -> FALSE
>> (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
>> (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>> -> FALSE
>> (3) if (&User-Name =~ /\.$/) {
>> (3) if (&User-Name =~ /\.$/) -> FALSE
>> (3) if (&User-Name =~ /@\./) {
>> (3) if (&User-Name =~ /@\./) -> FALSE
>> (3) } # if (&User-Name) = notfound
>> (3) } # policy filter_username = notfound
>> (3) [preprocess] = ok
>> (3) [chap] = noop
>> (3) [mschap] = noop
>> (3) suffix: Checking for suffix after "@"
>> (3) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
>> (3) suffix: No such realm "NULL"
>> (3) [suffix] = noop
>> (3) eap: Peer sent EAP Response (code 2) ID 108 length 6
>> (3) eap: Continuing tunnel setup
>> (3) [eap] = ok
>> (3) } # authorize = ok
>> (3) Found Auth-Type = eap
>> (3) # Executing group from file /etc/freeradius/sites-enabled/default
>> (3) authenticate {
>> (3) eap: Expiring EAP session with state 0xb5449406b7288d00
>> (3) eap: Finished EAP session with state 0xb5449406b7288d00
>> (3) eap: Previous EAP request found for state 0xb5449406b7288d00,
>> released from the list
>> (3) eap: Peer sent packet with method EAP PEAP (25)
>> (3) eap: Calling submodule eap_peap to process data
>> (3) eap_peap: Continuing EAP-TLS
>> (3) eap_peap: Peer ACKed our handshake fragment
>> (3) eap_peap: [eaptls verify] = request
>> (3) eap_peap: [eaptls process] = handled
>> (3) eap: Sending EAP Request (code 1) ID 109 length 1000
>> (3) eap: EAP session adding &reply:State = 0xb5449406b6298d00
>> (3) [eap] = handled
>> (3) } # authenticate = handled
>> (3) Using Post-Auth-Type Challenge
>> (3) Post-Auth-Type sub-section not found. Ignoring.
>> (3) # Executing group from file /etc/freeradius/sites-enabled/default
>> (3) Sent Access-Challenge Id 4 from 192.168.100.201:1812 to
>> 192.168.100.113:34296 length 0
>> (3) EAP-Message = 0x016d03e81940380fa68fefb0adb1
>> 60bf876008cdd25df7f1bb575a26398125bf6a36bcf24e3cf136422c1048
>> b034887efbcce1ad27c885f67ae13c739af72b5bbff6b9f7cc41b9b006ed
>> dd88d6cf5d54f66bb9884ac2f40853d3af5d741bb79faa72df0324c58d44
>> 8bd2c5583caee59c318907018948f4
>> (3) Message-Authenticator = 0x00000000000000000000000000000000
>> (3) State = 0xb5449406b6298d001eb003264d869845
>> (3) Finished request
>> Waking up in 4.9 seconds.
>> (4) Received Access-Request Id 5 from 192.168.100.113:34296 to
>> 192.168.100.201:1812 length 193
>> (4) User-Name = "bchristopher848"
>> (4) NAS-IP-Address = 10.0.150.19
>> (4) NAS-Identifier = "802aa849d031"
>> (4) NAS-Port = 0
>> (4) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
>> (4) Calling-Station-Id = "00-22-FB-6E-1D-C8"
>> (4) Framed-MTU = 1400
>> (4) NAS-Port-Type = Wireless-802.11
>> (4) Connect-Info = "CONNECT 0Mbps 802.11b"
>> (4) EAP-Message = 0x026d00061900
>> (4) State = 0xb5449406b6298d001eb003264d869845
>> (4) Message-Authenticator = 0x1308f82dd9c153d060e2d3f92f0e47c9
>> (4) session-state: No cached attributes
>> (4) # Executing section authorize from file /etc/freeradius/sites-enabled/
>> default
>> (4) authorize {
>> (4) policy filter_username {
>> (4) if (&User-Name) {
>> (4) if (&User-Name) -> TRUE
>> (4) if (&User-Name) {
>> (4) if (&User-Name =~ /@[^@]*@/ ) {
>> (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>> (4) if (&User-Name =~ /\.\./ ) {
>> (4) if (&User-Name =~ /\.\./ ) -> FALSE
>> (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
>> (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>> -> FALSE
>> (4) if (&User-Name =~ /\.$/) {
>> (4) if (&User-Name =~ /\.$/) -> FALSE
>> (4) if (&User-Name =~ /@\./) {
>> (4) if (&User-Name =~ /@\./) -> FALSE
>> (4) } # if (&User-Name) = notfound
>> (4) } # policy filter_username = notfound
>> (4) [preprocess] = ok
>> (4) [chap] = noop
>> (4) [mschap] = noop
>> (4) suffix: Checking for suffix after "@"
>> (4) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
>> (4) suffix: No such realm "NULL"
>> (4) [suffix] = noop
>> (4) eap: Peer sent EAP Response (code 2) ID 109 length 6
>> (4) eap: Continuing tunnel setup
>> (4) [eap] = ok
>> (4) } # authorize = ok
>> (4) Found Auth-Type = eap
>> (4) # Executing group from file /etc/freeradius/sites-enabled/default
>> (4) authenticate {
>> (4) eap: Expiring EAP session with state 0xb5449406b6298d00
>> (4) eap: Finished EAP session with state 0xb5449406b6298d00
>> (4) eap: Previous EAP request found for state 0xb5449406b6298d00,
>> released from the list
>> (4) eap: Peer sent packet with method EAP PEAP (25)
>> (4) eap: Calling submodule eap_peap to process data
>> (4) eap_peap: Continuing EAP-TLS
>> (4) eap_peap: Peer ACKed our handshake fragment
>> (4) eap_peap: [eaptls verify] = request
>> (4) eap_peap: [eaptls process] = handled
>> (4) eap: Sending EAP Request (code 1) ID 110 length 896
>> (4) eap: EAP session adding &reply:State = 0xb5449406b12a8d00
>> (4) [eap] = handled
>> (4) } # authenticate = handled
>> (4) Using Post-Auth-Type Challenge
>> (4) Post-Auth-Type sub-section not found. Ignoring.
>> (4) # Executing group from file /etc/freeradius/sites-enabled/default
>> (4) Sent Access-Challenge Id 5 from 192.168.100.201:1812 to
>> 192.168.100.113:34296 length 0
>> (4) EAP-Message = 0x016e038019003081b5310b300906
>> 0355040613024d543111300f06035504080c0849722d5261626174311230
>> 1006035504070c0954616c2d566972747531223020060355040a0c195468
>> 652041726368626973686f70732053656d696e6172792e3128302606092a
>> 864886f70d0109011619746563686e
>> (4) Message-Authenticator = 0x00000000000000000000000000000000
>> (4) State = 0xb5449406b12a8d001eb003264d869845
>> (4) Finished request
>> Waking up in 4.9 seconds.
>> (5) Received Access-Request Id 6 from 192.168.100.113:34296 to
>> 192.168.100.201:1812 length 331
>> (5) User-Name = "bchristopher848"
>> (5) NAS-IP-Address = 10.0.150.19
>> (5) NAS-Identifier = "802aa849d031"
>> (5) NAS-Port = 0
>> (5) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
>> (5) Calling-Station-Id = "00-22-FB-6E-1D-C8"
>> (5) Framed-MTU = 1400
>> (5) NAS-Port-Type = Wireless-802.11
>> (5) Connect-Info = "CONNECT 0Mbps 802.11b"
>> (5) EAP-Message = 0x026e009019800000008616030100
>> 46100000424104f8835ccc6647e01b6ec2e669280021622082e4c4d31a30
>> ed462cac3b447792cb9763fb1c6f5547b7650c9216b8a36641f100200f17
>> d1246ba46fc9eb9cef2cbf140301000101160301003036330cfdd1b9bd52
>> 1432d38a6be17cb4205d318a83802a
>> (5) State = 0xb5449406b12a8d001eb003264d869845
>> (5) Message-Authenticator = 0x7e43591038f26410ddbfc952608bf3e1
>> (5) session-state: No cached attributes
>> (5) # Executing section authorize from file /etc/freeradius/sites-enabled/
>> default
>> (5) authorize {
>> (5) policy filter_username {
>> (5) if (&User-Name) {
>> (5) if (&User-Name) -> TRUE
>> (5) if (&User-Name) {
>> (5) if (&User-Name =~ /@[^@]*@/ ) {
>> (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>> (5) if (&User-Name =~ /\.\./ ) {
>> (5) if (&User-Name =~ /\.\./ ) -> FALSE
>> (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
>> (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>> -> FALSE
>> (5) if (&User-Name =~ /\.$/) {
>> (5) if (&User-Name =~ /\.$/) -> FALSE
>> (5) if (&User-Name =~ /@\./) {
>> (5) if (&User-Name =~ /@\./) -> FALSE
>> (5) } # if (&User-Name) = notfound
>> (5) } # policy filter_username = notfound
>> (5) [preprocess] = ok
>> (5) [chap] = noop
>> (5) [mschap] = noop
>> (5) suffix: Checking for suffix after "@"
>> (5) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
>> (5) suffix: No such realm "NULL"
>> (5) [suffix] = noop
>> (5) eap: Peer sent EAP Response (code 2) ID 110 length 144
>> (5) eap: Continuing tunnel setup
>> (5) [eap] = ok
>> (5) } # authorize = ok
>> (5) Found Auth-Type = eap
>> (5) # Executing group from file /etc/freeradius/sites-enabled/default
>> (5) authenticate {
>> (5) eap: Expiring EAP session with state 0xb5449406b12a8d00
>> (5) eap: Finished EAP session with state 0xb5449406b12a8d00
>> (5) eap: Previous EAP request found for state 0xb5449406b12a8d00,
>> released from the list
>> (5) eap: Peer sent packet with method EAP PEAP (25)
>> (5) eap: Calling submodule eap_peap to process data
>> (5) eap_peap: Continuing EAP-TLS
>> (5) eap_peap: Peer indicated complete TLS record size will be 134 bytes
>> (5) eap_peap: Got complete TLS record (134 bytes)
>> (5) eap_peap: [eaptls verify] = length included
>> (5) eap_peap: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange
>> (5) eap_peap: TLS_accept: unknown state
>> (5) eap_peap: TLS_accept: unknown state
>> (5) eap_peap: <<< recv TLS 1.0 ChangeCipherSpec [length 0001]
>> (5) eap_peap: <<< recv TLS 1.0 Handshake [length 0010], Finished
>> (5) eap_peap: TLS_accept: unknown state
>> (5) eap_peap: >>> send TLS 1.0 ChangeCipherSpec [length 0001]
>> (5) eap_peap: TLS_accept: unknown state
>> (5) eap_peap: >>> send TLS 1.0 Handshake [length 0010], Finished
>> (5) eap_peap: TLS_accept: unknown state
>> (5) eap_peap: TLS_accept: unknown state
>> (5) eap_peap: (other): SSL negotiation finished successfully
>> (5) eap_peap: SSL Connection Established
>> (5) eap_peap: [eaptls process] = handled
>> (5) eap: Sending EAP Request (code 1) ID 111 length 65
>> (5) eap: EAP session adding &reply:State = 0xb5449406b02b8d00
>> (5) [eap] = handled
>> (5) } # authenticate = handled
>> (5) Using Post-Auth-Type Challenge
>> (5) Post-Auth-Type sub-section not found. Ignoring.
>> (5) # Executing group from file /etc/freeradius/sites-enabled/default
>> (5) Sent Access-Challenge Id 6 from 192.168.100.201:1812 to
>> 192.168.100.113:34296 length 0
>> (5) EAP-Message = 0x016f004119001403010001011603
>> 01003094086787833117af433bc1c929281ae2f5f7cd6692f7cc59d0a0bf
>> 65c818294d2b79cc16f11ac9f86e10a67a7fdb1a6b
>> (5) Message-Authenticator = 0x00000000000000000000000000000000
>> (5) State = 0xb5449406b02b8d001eb003264d869845
>> (5) Finished request
>> Waking up in 4.9 seconds.
>> (6) Received Access-Request Id 7 from 192.168.100.113:34296 to
>> 192.168.100.201:1812 length 193
>> (6) User-Name = "bchristopher848"
>> (6) NAS-IP-Address = 10.0.150.19
>> (6) NAS-Identifier = "802aa849d031"
>> (6) NAS-Port = 0
>> (6) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
>> (6) Calling-Station-Id = "00-22-FB-6E-1D-C8"
>> (6) Framed-MTU = 1400
>> (6) NAS-Port-Type = Wireless-802.11
>> (6) Connect-Info = "CONNECT 0Mbps 802.11b"
>> (6) EAP-Message = 0x026f00061900
>> (6) State = 0xb5449406b02b8d001eb003264d869845
>> (6) Message-Authenticator = 0x89f89025177c0801e5cd47b689bb35ec
>> (6) session-state: No cached attributes
>> (6) # Executing section authorize from file /etc/freeradius/sites-enabled/
>> default
>> (6) authorize {
>> (6) policy filter_username {
>> (6) if (&User-Name) {
>> (6) if (&User-Name) -> TRUE
>> (6) if (&User-Name) {
>> (6) if (&User-Name =~ /@[^@]*@/ ) {
>> (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>> (6) if (&User-Name =~ /\.\./ ) {
>> (6) if (&User-Name =~ /\.\./ ) -> FALSE
>> (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
>> (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>> -> FALSE
>> (6) if (&User-Name =~ /\.$/) {
>> (6) if (&User-Name =~ /\.$/) -> FALSE
>> (6) if (&User-Name =~ /@\./) {
>> (6) if (&User-Name =~ /@\./) -> FALSE
>> (6) } # if (&User-Name) = notfound
>> (6) } # policy filter_username = notfound
>> (6) [preprocess] = ok
>> (6) [chap] = noop
>> (6) [mschap] = noop
>> (6) suffix: Checking for suffix after "@"
>> (6) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
>> (6) suffix: No such realm "NULL"
>> (6) [suffix] = noop
>> (6) eap: Peer sent EAP Response (code 2) ID 111 length 6
>> (6) eap: Continuing tunnel setup
>> (6) [eap] = ok
>> (6) } # authorize = ok
>> (6) Found Auth-Type = eap
>> (6) # Executing group from file /etc/freeradius/sites-enabled/default
>> (6) authenticate {
>> (6) eap: Expiring EAP session with state 0xb5449406b02b8d00
>> (6) eap: Finished EAP session with state 0xb5449406b02b8d00
>> (6) eap: Previous EAP request found for state 0xb5449406b02b8d00,
>> released from the list
>> (6) eap: Peer sent packet with method EAP PEAP (25)
>> (6) eap: Calling submodule eap_peap to process data
>> (6) eap_peap: Continuing EAP-TLS
>> (6) eap_peap: Peer ACKed our handshake fragment. handshake is finished
>> (6) eap_peap: [eaptls verify] = success
>> (6) eap_peap: [eaptls process] = success
>> (6) eap_peap: Session established. Decoding tunneled attributes
>> (6) eap_peap: PEAP state TUNNEL ESTABLISHED
>> (6) eap: Sending EAP Request (code 1) ID 112 length 43
>> (6) eap: EAP session adding &reply:State = 0xb5449406b3348d00
>> (6) [eap] = handled
>> (6) } # authenticate = handled
>> (6) Using Post-Auth-Type Challenge
>> (6) Post-Auth-Type sub-section not found. Ignoring.
>> (6) # Executing group from file /etc/freeradius/sites-enabled/default
>> (6) Sent Access-Challenge Id 7 from 192.168.100.201:1812 to
>> 192.168.100.113:34296 length 0
>> (6) EAP-Message = 0x0170002b1900170301002091eabc
>> 824030fa0d118d08413389ff5a78d63a9561aa4704edb36913865e9641
>> (6) Message-Authenticator = 0x00000000000000000000000000000000
>> (6) State = 0xb5449406b3348d001eb003264d869845
>> (6) Finished request
>> Waking up in 2.6 seconds.
>> (7) Received Access-Request Id 8 from 192.168.100.113:34296 to
>> 192.168.100.201:1812 length 246
>> (7) User-Name = "bchristopher848"
>> (7) NAS-IP-Address = 10.0.150.19
>> (7) NAS-Identifier = "802aa849d031"
>> (7) NAS-Port = 0
>> (7) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
>> (7) Calling-Station-Id = "00-22-FB-6E-1D-C8"
>> (7) Framed-MTU = 1400
>> (7) NAS-Port-Type = Wireless-802.11
>> (7) Connect-Info = "CONNECT 0Mbps 802.11b"
>> (7) EAP-Message = 0x0270003b19001703010030c8fbf0
>> 015e3e5a875a826ccd41cd45b083183d0fbf452e6e4ccdc2b10c2d758557
>> f2bf2ba865abb148620ece26115524
>> (7) State = 0xb5449406b3348d001eb003264d869845
>> (7) Message-Authenticator = 0x0ec21e66dd7cd4e0a4858c79afabd736
>> (7) session-state: No cached attributes
>> (7) # Executing section authorize from file /etc/freeradius/sites-enabled/
>> default
>> (7) authorize {
>> (7) policy filter_username {
>> (7) if (&User-Name) {
>> (7) if (&User-Name) -> TRUE
>> (7) if (&User-Name) {
>> (7) if (&User-Name =~ /@[^@]*@/ ) {
>> (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>> (7) if (&User-Name =~ /\.\./ ) {
>> (7) if (&User-Name =~ /\.\./ ) -> FALSE
>> (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
>> (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>> -> FALSE
>> (7) if (&User-Name =~ /\.$/) {
>> (7) if (&User-Name =~ /\.$/) -> FALSE
>> (7) if (&User-Name =~ /@\./) {
>> (7) if (&User-Name =~ /@\./) -> FALSE
>> (7) } # if (&User-Name) = notfound
>> (7) } # policy filter_username = notfound
>> (7) [preprocess] = ok
>> (7) [chap] = noop
>> (7) [mschap] = noop
>> (7) suffix: Checking for suffix after "@"
>> (7) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
>> (7) suffix: No such realm "NULL"
>> (7) [suffix] = noop
>> (7) eap: Peer sent EAP Response (code 2) ID 112 length 59
>> (7) eap: Continuing tunnel setup
>> (7) [eap] = ok
>> (7) } # authorize = ok
>> (7) Found Auth-Type = eap
>> (7) # Executing group from file /etc/freeradius/sites-enabled/default
>> (7) authenticate {
>> (7) eap: Expiring EAP session with state 0xb5449406b3348d00
>> (7) eap: Finished EAP session with state 0xb5449406b3348d00
>> (7) eap: Previous EAP request found for state 0xb5449406b3348d00,
>> released from the list
>> (7) eap: Peer sent packet with method EAP PEAP (25)
>> (7) eap: Calling submodule eap_peap to process data
>> (7) eap_peap: Continuing EAP-TLS
>> (7) eap_peap: [eaptls verify] = ok
>> (7) eap_peap: Done initial handshake
>> (7) eap_peap: [eaptls process] = ok
>> (7) eap_peap: Session established. Decoding tunneled attributes
>> (7) eap_peap: PEAP state WAITING FOR INNER IDENTITY
>> (7) eap_peap: Identity - bchristopher848
>> (7) eap_peap: Got inner identity 'bchristopher848'
>> (7) eap_peap: Setting default EAP type for tunneled EAP session
>> (7) eap_peap: Got tunneled request
>> (7) eap_peap: EAP-Message = 0x0270001401626368726973746f70686572383438
>> (7) eap_peap: Setting User-Name to bchristopher848
>> (7) eap_peap: Sending tunneled request to inner-tunnel
>> (7) eap_peap: EAP-Message = 0x0270001401626368726973746f70686572383438
>> (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
>> (7) eap_peap: User-Name = "bchristopher848"
>> (7) Virtual server inner-tunnel received request
>> (7) EAP-Message = 0x0270001401626368726973746f70686572383438
>> (7) FreeRADIUS-Proxied-To = 127.0.0.1
>> (7) User-Name = "bchristopher848"
>> (7) WARNING: Outer and inner identities are the same. User privacy is
>> compromised.
>> (7) server inner-tunnel {
>> (7) # Executing section authorize from file
>> /etc/freeradius/sites-enabled/inner-tunnel
>> (7) authorize {
>> (7) policy filter_username {
>> (7) if (&User-Name) {
>> (7) if (&User-Name) -> TRUE
>> (7) if (&User-Name) {
>> (7) if (&User-Name =~ /@[^@]*@/ ) {
>> (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>> (7) if (&User-Name =~ /\.\./ ) {
>> (7) if (&User-Name =~ /\.\./ ) -> FALSE
>> (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>> {
>> (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>> -> FALSE
>> (7) if (&User-Name =~ /\.$/) {
>> (7) if (&User-Name =~ /\.$/) -> FALSE
>> (7) if (&User-Name =~ /@\./) {
>> (7) if (&User-Name =~ /@\./) -> FALSE
>> (7) } # if (&User-Name) = notfound
>> (7) } # policy filter_username = notfound
>> (7) [chap] = noop
>> (7) [mschap] = noop
>> (7) suffix: Checking for suffix after "@"
>> (7) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
>> (7) suffix: No such realm "NULL"
>> (7) [suffix] = noop
>> (7) update control {
>> (7) &Proxy-To-Realm := LOCAL
>> (7) } # update control = noop
>> (7) eap: Peer sent EAP Response (code 2) ID 112 length 20
>> (7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
>> rest of authorize
>> (7) [eap] = ok
>> (7) } # authorize = ok
>> (7) Found Auth-Type = eap
>> (7) # Executing group from file /etc/freeradius/sites-enabled/
>> inner-tunnel
>> (7) authenticate {
>> (7) eap: Peer sent packet with method EAP Identity (1)
>> (7) eap: Calling submodule eap_mschapv2 to process data
>> (7) eap_mschapv2: Issuing Challenge
>> (7) eap: Sending EAP Request (code 1) ID 113 length 43
>> (7) eap: EAP session adding &reply:State = 0x38f91b6e38880129
>> (7) [eap] = handled
>> (7) } # authenticate = handled
>> (7) } # server inner-tunnel
>> (7) Virtual server sending reply
>> (7) EAP-Message = 0x0171002b1a01710026100f1b0f77
>> 8f0e5ff10d130bcde3f0a1f0667265657261646975732d332e302e3135
>> (7) Message-Authenticator = 0x00000000000000000000000000000000
>> (7) State = 0x38f91b6e38880129b3a6b459c0f91610
>> (7) eap_peap: Got tunneled reply code 11
>> (7) eap_peap: EAP-Message = 0x0171002b1a01710026100f1b0f77
>> 8f0e5ff10d130bcde3f0a1f0667265657261646975732d332e302e3135
>> (7) eap_peap: Message-Authenticator = 0x0000000000000000000000000000
>> 0000
>> (7) eap_peap: State = 0x38f91b6e38880129b3a6b459c0f91610
>> (7) eap_peap: Got tunneled reply RADIUS code 11
>> (7) eap_peap: EAP-Message = 0x0171002b1a01710026100f1b0f77
>> 8f0e5ff10d130bcde3f0a1f0667265657261646975732d332e302e3135
>> (7) eap_peap: Message-Authenticator = 0x0000000000000000000000000000
>> 0000
>> (7) eap_peap: State = 0x38f91b6e38880129b3a6b459c0f91610
>> (7) eap_peap: Got tunneled Access-Challenge
>> (7) eap: Sending EAP Request (code 1) ID 113 length 75
>> (7) eap: EAP session adding &reply:State = 0xb5449406b2358d00
>> (7) [eap] = handled
>> (7) } # authenticate = handled
>> (7) Using Post-Auth-Type Challenge
>> (7) Post-Auth-Type sub-section not found. Ignoring.
>> (7) # Executing group from file /etc/freeradius/sites-enabled/default
>> (7) Sent Access-Challenge Id 8 from 192.168.100.201:1812 to
>> 192.168.100.113:34296 length 0
>> (7) EAP-Message = 0x0171004b190017030100403a39fb
>> 1bbb95a5bdae36dec7bbaf48cd6d67436cc6fa144c66482d9a55dee6efc1
>> 22c2ae145e37423201a0becee44924132e0e197859e4e437513ae27427e3a6
>> (7) Message-Authenticator = 0x00000000000000000000000000000000
>> (7) State = 0xb5449406b2358d001eb003264d869845
>> (7) Finished request
>> Waking up in 2.6 seconds.
>> (8) Received Access-Request Id 9 from 192.168.100.113:34296 to
>> 192.168.100.201:1812 length 294
>> (8) User-Name = "bchristopher848"
>> (8) NAS-IP-Address = 10.0.150.19
>> (8) NAS-Identifier = "802aa849d031"
>> (8) NAS-Port = 0
>> (8) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
>> (8) Calling-Station-Id = "00-22-FB-6E-1D-C8"
>> (8) Framed-MTU = 1400
>> (8) NAS-Port-Type = Wireless-802.11
>> (8) Connect-Info = "CONNECT 0Mbps 802.11b"
>> (8) EAP-Message = 0x0271006b19001703010060dc68da
>> 606888205a8249468c13811c37cc426f2ad4ed4ed80b369f946ab0e0029d
>> 069f9b903b244d4822ebf72b429433c990dcfef3af28b8871c7653e7c286
>> d1c4ad435ad1812458eaec44dc637bf173969928be0946944de2762170de365dc0
>> (8) State = 0xb5449406b2358d001eb003264d869845
>> (8) Message-Authenticator = 0xf489ba028df4298dc612460d97cc98ee
>> (8) session-state: No cached attributes
>> (8) # Executing section authorize from file /etc/freeradius/sites-enabled/
>> default
>> (8) authorize {
>> (8) policy filter_username {
>> (8) if (&User-Name) {
>> (8) if (&User-Name) -> TRUE
>> (8) if (&User-Name) {
>> (8) if (&User-Name =~ /@[^@]*@/ ) {
>> (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>> (8) if (&User-Name =~ /\.\./ ) {
>> (8) if (&User-Name =~ /\.\./ ) -> FALSE
>> (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
>> (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>> -> FALSE
>> (8) if (&User-Name =~ /\.$/) {
>> (8) if (&User-Name =~ /\.$/) -> FALSE
>> (8) if (&User-Name =~ /@\./) {
>> (8) if (&User-Name =~ /@\./) -> FALSE
>> (8) } # if (&User-Name) = notfound
>> (8) } # policy filter_username = notfound
>> (8) [preprocess] = ok
>> (8) [chap] = noop
>> (8) [mschap] = noop
>> (8) suffix: Checking for suffix after "@"
>> (8) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
>> (8) suffix: No such realm "NULL"
>> (8) [suffix] = noop
>> (8) eap: Peer sent EAP Response (code 2) ID 113 length 107
>> (8) eap: Continuing tunnel setup
>> (8) [eap] = ok
>> (8) } # authorize = ok
>> (8) Found Auth-Type = eap
>> (8) # Executing group from file /etc/freeradius/sites-enabled/default
>> (8) authenticate {
>> (8) eap: Expiring EAP session with state 0x38f91b6e38880129
>> (8) eap: Finished EAP session with state 0xb5449406b2358d00
>> (8) eap: Previous EAP request found for state 0xb5449406b2358d00,
>> released from the list
>> (8) eap: Peer sent packet with method EAP PEAP (25)
>> (8) eap: Calling submodule eap_peap to process data
>> (8) eap_peap: Continuing EAP-TLS
>> (8) eap_peap: [eaptls verify] = ok
>> (8) eap_peap: Done initial handshake
>> (8) eap_peap: [eaptls process] = ok
>> (8) eap_peap: Session established. Decoding tunneled attributes
>> (8) eap_peap: PEAP state phase2
>> (8) eap_peap: EAP method MSCHAPv2 (26)
>> (8) eap_peap: Got tunneled request
>> (8) eap_peap: EAP-Message = 0x0271004a1a027100453136aadef2
>> a35125429a547478d2433260000000000000000026bd920d94eca847c70d
>> 9775f4afe71538b455e9932097c600626368726973746f70686572383438
>> (8) eap_peap: Setting User-Name to bchristopher848
>> (8) eap_peap: Sending tunneled request to inner-tunnel
>> (8) eap_peap: EAP-Message = 0x0271004a1a027100453136aadef2
>> a35125429a547478d2433260000000000000000026bd920d94eca847c70d
>> 9775f4afe71538b455e9932097c600626368726973746f70686572383438
>> (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
>> (8) eap_peap: User-Name = "bchristopher848"
>> (8) eap_peap: State = 0x38f91b6e38880129b3a6b459c0f91610
>> (8) Virtual server inner-tunnel received request
>> (8) EAP-Message = 0x0271004a1a027100453136aadef2
>> a35125429a547478d2433260000000000000000026bd920d94eca847c70d
>> 9775f4afe71538b455e9932097c600626368726973746f70686572383438
>> (8) FreeRADIUS-Proxied-To = 127.0.0.1
>> (8) User-Name = "bchristopher848"
>> (8) State = 0x38f91b6e38880129b3a6b459c0f91610
>> (8) WARNING: Outer and inner identities are the same. User privacy is
>> compromised.
>> (8) server inner-tunnel {
>> (8) session-state: No cached attributes
>> (8) # Executing section authorize from file
>> /etc/freeradius/sites-enabled/inner-tunnel
>> (8) authorize {
>> (8) policy filter_username {
>> (8) if (&User-Name) {
>> (8) if (&User-Name) -> TRUE
>> (8) if (&User-Name) {
>> (8) if (&User-Name =~ /@[^@]*@/ ) {
>> (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>> (8) if (&User-Name =~ /\.\./ ) {
>> (8) if (&User-Name =~ /\.\./ ) -> FALSE
>> (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>> {
>> (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>> -> FALSE
>> (8) if (&User-Name =~ /\.$/) {
>> (8) if (&User-Name =~ /\.$/) -> FALSE
>> (8) if (&User-Name =~ /@\./) {
>> (8) if (&User-Name =~ /@\./) -> FALSE
>> (8) } # if (&User-Name) = notfound
>> (8) } # policy filter_username = notfound
>> (8) [chap] = noop
>> (8) [mschap] = noop
>> (8) suffix: Checking for suffix after "@"
>> (8) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
>> (8) suffix: No such realm "NULL"
>> (8) [suffix] = noop
>> (8) update control {
>> (8) &Proxy-To-Realm := LOCAL
>> (8) } # update control = noop
>> (8) eap: Peer sent EAP Response (code 2) ID 113 length 74
>> (8) eap: No EAP Start, assuming it's an on-going EAP conversation
>> (8) [eap] = updated
>> (8) [files] = noop
>> rlm_ldap (ldap): Reserved connection (1)
>> (8) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
>> (8) ldap: --> (cn=bchristopher848)
>> (8) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with
>> filter "(cn=bchristopher848)", scope "sub"
>> (8) ldap: Waiting for search result...
>> (8) ldap: User object found at DN "cn=bchristopher848,cn=Seminar
>> ians,ou=SeminaryOU,dc=seminary,dc=local"
>> (8) ldap: Processing user attributes
>> (8) ldap: control:Password-With-Header += '{ssha}o1fjrtGMqroWxrIgC8G/jwK
>> 8GK5BxvANe+pK7w=='
>> rlm_ldap (ldap): Released connection (1)
>> Need 4 more connections to reach 10 spares
>> rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots
>> used
>> rlm_ldap (ldap): Connecting to ldap://localhost:389
>> rlm_ldap (ldap): Waiting for bind result...
>> rlm_ldap (ldap): Bind successful
>> (8) [ldap] = updated
>> rlm_ldap (adldap): Reserved connection (1)
>> (8) adldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
>> (8) adldap: --> (cn=bchristopher848)
>> (8) adldap: Performing search in "ou=School,dc=seminary,dc=ad" with
>> filter "(cn=bchristopher848)", scope "sub"
>> (8) adldap: Waiting for search result...
>> (8) adldap: The specified DN wasn't found
>> (8) adldap: Search returned no results
>> rlm_ldap (adldap): Released connection (1)
>> Need 4 more connections to reach 10 spares
>> rlm_ldap (adldap): Opening additional connection (6), 1 of 26 pending
>> slots used
>> rlm_ldap (adldap): Connecting to ldap://localhost:389
>> rlm_ldap (adldap): Waiting for bind result...
>> rlm_ldap (adldap): Bind successful
>> (8) [adldap] = notfound
>> (8) [expiration] = noop
>> (8) [logintime] = noop
>> (8) pap: Converted: &control:Password-With-Header ->
>> &control:SSHA1-Password
>> (8) pap: Removing &control:Password-With-Header
>> (8) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28
>> bytes
>> (8) pap: WARNING: Auth-Type already set. Not setting to PAP
>> (8) [pap] = noop
>> (8) } # authorize = updated
>> (8) Found Auth-Type = eap
>> (8) # Executing group from file /etc/freeradius/sites-enabled/
>> inner-tunnel
>> (8) authenticate {
>> (8) eap: Expiring EAP session with state 0x38f91b6e38880129
>> (8) eap: Finished EAP session with state 0x38f91b6e38880129
>> (8) eap: Previous EAP request found for state 0x38f91b6e38880129,
>> released from the list
>> (8) eap: Peer sent packet with method EAP MSCHAPv2 (26)
>> (8) eap: Calling submodule eap_mschapv2 to process data
>> (8) eap_mschapv2: # Executing group from file
>> /etc/freeradius/sites-enabled/inner-tunnel
>> (8) eap_mschapv2: Auth-Type MS-CHAP {
>> (8) mschap: WARNING: No Cleartext-Password configured. Cannot create
>> NT-Password
>> (8) mschap: WARNING: No Cleartext-Password configured. Cannot create
>> LM-Password
>> (8) mschap: Creating challenge hash with username: bchristopher848
>> (8) mschap: Client is using MS-CHAPv2
>> (8) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform
>> authentication
>> (8) mschap: ERROR: MS-CHAP2-Response is incorrect
>> (8) [mschap] = reject
>> (8) } # Auth-Type MS-CHAP = reject
>> (8) eap: Sending EAP Failure (code 4) ID 113 length 4
>> (8) eap: Freeing handler
>> (8) [eap] = reject
>> (8) } # authenticate = reject
>> (8) Failed to authenticate the user
>> (8) Using Post-Auth-Type Reject
>> (8) # Executing group from file /etc/freeradius/sites-enabled/
>> inner-tunnel
>> (8) Post-Auth-Type REJECT {
>> (8) attr_filter.access_reject: EXPAND %{User-Name}
>> (8) attr_filter.access_reject: --> bchristopher848
>> (8) attr_filter.access_reject: Matched entry DEFAULT at line 11
>> (8) [attr_filter.access_reject] = updated
>> (8) update outer.session-state {
>> (8) &Module-Failure-Message := &request:Module-Failure-Message
>> -> 'mschap: FAILED: No NT/LM-Password. Cannot perform authentication'
>> (8) } # update outer.session-state = noop
>> (8) } # Post-Auth-Type REJECT = updated
>> (8) } # server inner-tunnel
>> (8) Virtual server sending reply
>> (8) MS-CHAP-Error = "qE=691 R=1 C=523d66a28c934a7937a449415ae8f8ad V=3
>> M=Authentication failed"
>> (8) EAP-Message = 0x04710004
>> (8) Message-Authenticator = 0x00000000000000000000000000000000
>> (8) eap_peap: Got tunneled reply code 3
>> (8) eap_peap: MS-CHAP-Error = "qE=691 R=1 C=523d66a28c934a7937a449415ae8f8ad
>> V=3 M=Authentication failed"
>> (8) eap_peap: EAP-Message = 0x04710004
>> (8) eap_peap: Message-Authenticator = 0x0000000000000000000000000000
>> 0000
>> (8) eap_peap: Got tunneled reply RADIUS code 3
>> (8) eap_peap: MS-CHAP-Error = "qE=691 R=1 C=523d66a28c934a7937a449415ae8f8ad
>> V=3 M=Authentication failed"
>> (8) eap_peap: EAP-Message = 0x04710004
>> (8) eap_peap: Message-Authenticator = 0x0000000000000000000000000000
>> 0000
>> (8) eap_peap: Tunneled authentication was rejected
>> (8) eap_peap: FAILURE
>> (8) eap: Sending EAP Request (code 1) ID 114 length 43
>> (8) eap: EAP session adding &reply:State = 0xb5449406bd368d00
>> (8) [eap] = handled
>> (8) } # authenticate = handled
>> (8) Using Post-Auth-Type Challenge
>> (8) Post-Auth-Type sub-section not found. Ignoring.
>> (8) # Executing group from file /etc/freeradius/sites-enabled/default
>> (8) session-state: Saving cached attributes
>> (8) Module-Failure-Message := "mschap: FAILED: No NT/LM-Password.
>> Cannot perform authentication"
>> (8) Sent Access-Challenge Id 9 from 192.168.100.201:1812 to
>> 192.168.100.113:34296 length 0
>> (8) EAP-Message = 0x0172002b190017030100207447ef
>> 7e889f505a2467ece5e23e6132aabd5ae2a2b62f44232ce0581e567dc8
>> (8) Message-Authenticator = 0x00000000000000000000000000000000
>> (8) State = 0xb5449406bd368d001eb003264d869845
>> (8) Finished request
>> Waking up in 2.6 seconds.
>> (9) Received Access-Request Id 10 from 192.168.100.113:34296 to
>> 192.168.100.201:1812 length 230
>> (9) User-Name = "bchristopher848"
>> (9) NAS-IP-Address = 10.0.150.19
>> (9) NAS-Identifier = "802aa849d031"
>> (9) NAS-Port = 0
>> (9) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
>> (9) Calling-Station-Id = "00-22-FB-6E-1D-C8"
>> (9) Framed-MTU = 1400
>> (9) NAS-Port-Type = Wireless-802.11
>> (9) Connect-Info = "CONNECT 0Mbps 802.11b"
>> (9) EAP-Message = 0x0272002b19001703010020c6855d
>> 5f0630c6486963b3a872b1ce4479a9d9748bb1a8d28a488183707339de
>> (9) State = 0xb5449406bd368d001eb003264d869845
>> (9) Message-Authenticator = 0xe32f0f6506920ee010991cab23cdc592
>> (9) Restoring &session-state
>> (9) &session-state:Module-Failure-Message := "mschap: FAILED: No
>> NT/LM-Password. Cannot perform authentication"
>> (9) # Executing section authorize from file /etc/freeradius/sites-enabled/
>> default
>> (9) authorize {
>> (9) policy filter_username {
>> (9) if (&User-Name) {
>> (9) if (&User-Name) -> TRUE
>> (9) if (&User-Name) {
>> (9) if (&User-Name =~ /@[^@]*@/ ) {
>> (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>> (9) if (&User-Name =~ /\.\./ ) {
>> (9) if (&User-Name =~ /\.\./ ) -> FALSE
>> (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
>> (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>> -> FALSE
>> (9) if (&User-Name =~ /\.$/) {
>> (9) if (&User-Name =~ /\.$/) -> FALSE
>> (9) if (&User-Name =~ /@\./) {
>> (9) if (&User-Name =~ /@\./) -> FALSE
>> (9) } # if (&User-Name) = notfound
>> (9) } # policy filter_username = notfound
>> (9) [preprocess] = ok
>> (9) [chap] = noop
>> (9) [mschap] = noop
>> (9) suffix: Checking for suffix after "@"
>> (9) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
>> (9) suffix: No such realm "NULL"
>> (9) [suffix] = noop
>> (9) eap: Peer sent EAP Response (code 2) ID 114 length 43
>> (9) eap: Continuing tunnel setup
>> (9) [eap] = ok
>> (9) } # authorize = ok
>> (9) Found Auth-Type = eap
>> (9) # Executing group from file /etc/freeradius/sites-enabled/default
>> (9) authenticate {
>> (9) eap: Expiring EAP session with state 0xb5449406bd368d00
>> (9) eap: Finished EAP session with state 0xb5449406bd368d00
>> (9) eap: Previous EAP request found for state 0xb5449406bd368d00,
>> released from the list
>> (9) eap: Peer sent packet with method EAP PEAP (25)
>> (9) eap: Calling submodule eap_peap to process data
>> (9) eap_peap: Continuing EAP-TLS
>> (9) eap_peap: [eaptls verify] = ok
>> (9) eap_peap: Done initial handshake
>> (9) eap_peap: [eaptls process] = ok
>> (9) eap_peap: Session established. Decoding tunneled attributes
>> (9) eap_peap: PEAP state send tlv failure
>> (9) eap_peap: Received EAP-TLV response
>> (9) eap_peap: ERROR: The users session was previously rejected:
>> returning reject (again.)
>> (9) eap_peap: This means you need to read the PREVIOUS messages in the
>> debug output
>> (9) eap_peap: to find out the reason why the user was rejected
>> (9) eap_peap: Look for "reject" or "fail". Those earlier messages will
>> tell you
>> (9) eap_peap: what went wrong, and how to fix the problem
>> (9) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module
>> failed
>> (9) eap: Sending EAP Failure (code 4) ID 114 length 4
>> (9) eap: Failed in EAP select
>> (9) [eap] = invalid
>> (9) } # authenticate = invalid
>> (9) Failed to authenticate the user
>> (9) Using Post-Auth-Type Reject
>> (9) # Executing group from file /etc/freeradius/sites-enabled/default
>> (9) Post-Auth-Type REJECT {
>> (9) attr_filter.access_reject: EXPAND %{User-Name}
>> (9) attr_filter.access_reject: --> bchristopher848
>> (9) attr_filter.access_reject: Matched entry DEFAULT at line 11
>> (9) [attr_filter.access_reject] = updated
>> (9) [eap] = noop
>> (9) policy remove_reply_message_if_eap {
>> (9) if (&reply:EAP-Message && &reply:Reply-Message) {
>> (9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
>> (9) else {
>> (9) [noop] = noop
>> (9) } # else = noop
>> (9) } # policy remove_reply_message_if_eap = noop
>> (9) } # Post-Auth-Type REJECT = updated
>> (9) Delaying response for 1.000000 seconds
>> Waking up in 0.3 seconds.
>> Waking up in 0.6 seconds.
>> (9) Sending delayed response
>> (9) Sent Access-Reject Id 10 from 192.168.100.201:1812 to
>> 192.168.100.113:34296 length 44
>> (9) EAP-Message = 0x04720004
>> (9) Message-Authenticator = 0x00000000000000000000000000000000
>> Waking up in 1.6 seconds.
>> (0) Cleaning up request packet ID 1 with timestamp +30
>> (1) Cleaning up request packet ID 2 with timestamp +30
>> (2) Cleaning up request packet ID 3 with timestamp +30
>> (3) Cleaning up request packet ID 4 with timestamp +30
>> (4) Cleaning up request packet ID 5 with timestamp +30
>> (5) Cleaning up request packet ID 6 with timestamp +30
>> Waking up in 2.2 seconds.
>> (6) Cleaning up request packet ID 7 with timestamp +32
>> (7) Cleaning up request packet ID 8 with timestamp +32
>> (8) Cleaning up request packet ID 9 with timestamp +32
>> (9) Cleaning up request packet ID 10 with timestamp +32
>> Ready to process requests
>> (10) Received Accounting-Request Id 1 from 192.168.100.115:52712 to
>> 192.168.100.201:1813 length 90
>> (10) Acct-Status-Type = Accounting-Off
>> (10) Acct-Authentic = RADIUS
>> (10) NAS-IP-Address = 10.0.148.205
>> (10) NAS-Identifier = "802aa849cbcc"
>> (10) Called-Station-Id = "80-2A-A8-4A-CB-CC:SeminaryWiFi"
>> (10) Acct-Terminate-Cause = NAS-Reboot
>> (10) # Executing section preacct from file /etc/freeradius/sites-enabled/
>> default
>> (10) preacct {
>> (10) [preprocess] = ok
>> (10) policy acct_unique {
>> (10) update request {
>> (10) &Tmp-String-9 := "ai:"
>> (10) } # update request = noop
>> (10) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
>> ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) {
>> (10) EXPAND %{hex:&Class}
>> (10) -->
>> (10) EXPAND ^%{hex:&Tmp-String-9}
>> (10) --> ^61693a
>> (10) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
>> ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE
>> (10) else {
>> (10) update request {
>> (10) EXPAND %{md5:%{User-Name},%{Acct-Sess
>> ion-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-
>> Identifier},%{NAS-Port-ID},%{NAS-Port}}
>> (10) --> 3fbd256e7d3667dda249cdebb204aa6c
>> (10) &Acct-Unique-Session-Id := 3fbd256e7d3667dda249cdebb204aa
>> 6c
>> (10) } # update request = noop
>> (10) } # else = noop
>> (10) } # policy acct_unique = noop
>> (10) [suffix] = noop
>> (10) [files] = noop
>> (10) } # preacct = ok
>> (10) # Executing section accounting from file
>> /etc/freeradius/sites-enabled/default
>> (10) accounting {
>> (10) detail: EXPAND /var/log/freeradius/radacct/%{
>> %{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d
>> (10) detail: --> /var/log/freeradius/radacct/19
>> 2.168.100.115/detail-20170905
>> (10) detail: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Pa
>> cket-Src-IPv6-Address}}/detail-%Y%m%d expands to
>> /var/log/freeradius/radacct/192.168.100.115/detail-20170905
>> (10) detail: EXPAND %t
>> (10) detail: --> Tue Sep 5 22:05:39 2017
>> (10) [detail] = ok
>> (10) [unix] = noop
>> (10) [exec] = noop
>> (10) attr_filter.accounting_response: EXPAND %{User-Name}
>> (10) attr_filter.accounting_response: -->
>> (10) [attr_filter.accounting_response] = noop
>> (10) } # accounting = ok
>> (10) Sent Accounting-Response Id 1 from 192.168.100.201:1813 to
>> 192.168.100.115:52712 length 0
>> (10) Finished request
>> (10) Cleaning up request packet ID 1 with timestamp +44
>> Ready to process requests
>> (11) Received Accounting-Request Id 1 from 192.168.100.115:41826 to
>> 192.168.100.201:1813 length 90
>> (11) Acct-Status-Type = Accounting-Off
>> (11) Acct-Authentic = RADIUS
>> (11) NAS-IP-Address = 10.0.148.205
>> (11) NAS-Identifier = "802aa849cbcc"
>> (11) Called-Station-Id = "82-2A-A8-4B-CB-CC:SeminaryWiFi"
>> (11) Acct-Terminate-Cause = NAS-Reboot
>> (11) # Executing section preacct from file /etc/freeradius/sites-enabled/
>> default
>> (11) preacct {
>> (11) [preprocess] = ok
>> (11) policy acct_unique {
>> (11) update request {
>> (11) &Tmp-String-9 := "ai:"
>> (11) } # update request = noop
>> (11) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
>> ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) {
>> (11) EXPAND %{hex:&Class}
>> (11) -->
>> (11) EXPAND ^%{hex:&Tmp-String-9}
>> (11) --> ^61693a
>> (11) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
>> ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE
>> (11) else {
>> (11) update request {
>> (11) EXPAND %{md5:%{User-Name},%{Acct-Sess
>> ion-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-
>> Identifier},%{NAS-Port-ID},%{NAS-Port}}
>> (11) --> 3fbd256e7d3667dda249cdebb204aa6c
>> (11) &Acct-Unique-Session-Id := 3fbd256e7d3667dda249cdebb204aa
>> 6c
>> (11) } # update request = noop
>> (11) } # else = noop
>> (11) } # policy acct_unique = noop
>> (11) [suffix] = noop
>> (11) [files] = noop
>> (11) } # preacct = ok
>> (11) # Executing section accounting from file
>> /etc/freeradius/sites-enabled/default
>> (11) accounting {
>> (11) detail: EXPAND /var/log/freeradius/radacct/%{
>> %{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d
>> (11) detail: --> /var/log/freeradius/radacct/19
>> 2.168.100.115/detail-20170905
>> (11) detail: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Pa
>> cket-Src-IPv6-Address}}/detail-%Y%m%d expands to
>> /var/log/freeradius/radacct/192.168.100.115/detail-20170905
>> (11) detail: EXPAND %t
>> (11) detail: --> Tue Sep 5 22:05:40 2017
>> (11) [detail] = ok
>> (11) [unix] = noop
>> (11) [exec] = noop
>> (11) attr_filter.accounting_response: EXPAND %{User-Name}
>> (11) attr_filter.accounting_response: -->
>> (11) [attr_filter.accounting_response] = noop
>> (11) } # accounting = ok
>> (11) Sent Accounting-Response Id 1 from 192.168.100.201:1813 to
>> 192.168.100.115:41826 length 0
>> (11) Finished request
>> (11) Cleaning up request packet ID 1 with timestamp +45
>> Ready to process requests
>>
>>
>>
>>
>>
>> Matthew Pulis
>> mobile / WhatsApp: +356 79539404 <+356%207953%209404>
>>
>>
>>
More information about the Freeradius-Users
mailing list