Terminate EAP-TTLS then proxy
adrian.p.smith at bt.com
adrian.p.smith at bt.com
Thu Sep 21 21:31:05 CEST 2017
I have returned to this problem and am using a fresh copy of 3.0.15 and the eapol_test client.
Here is my output:
FreeRADIUS Version 3.0.15
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /home/adrian/freeradius-server-3.0.15/share/freeradius/dictionary
including dictionary file /home/adrian/freeradius-server-3.0.15/share/freeradius/dictionary.dhcp
including dictionary file /home/adrian/freeradius-server-3.0.15/share/freeradius/dictionary.vqp
including dictionary file /home/adrian/freeradius-server-3.0.15/etc/raddb/dictionary
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/radiusd.conf
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/proxy.conf
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/clients.conf
including files in directory /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/chap
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/dynamic_clients
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/files
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/sradutmp
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/mschap
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/soh
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/ntlm_auth
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/realm
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/utf8
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/attr_filter
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/passwd
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/echo
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/unpack
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/date
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/linelog
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/preprocess
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/detail
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/exec
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/eap
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/unix
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/digest
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/detail.log
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/pap
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/cache_eap
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/dhcp
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/expiration
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/radutmp
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/replicate
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/expr
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/logintime
including files in directory /home/adrian/freeradius-server-3.0.15/etc/raddb/policy.d/
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/policy.d/moonshot-targeted-ids
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/policy.d/canonicalization
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/policy.d/debug
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/policy.d/eap
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/policy.d/operator-name
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/policy.d/dhcp
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/policy.d/cui
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/policy.d/control
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/policy.d/filter
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/policy.d/accounting
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/policy.d/abfab-tr
including files in directory /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
including configuration file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/inner-tunnel
main {
name = "radiusd"
prefix = "/home/adrian/freeradius-server-3.0.15"
localstatedir = "/home/adrian/freeradius-server-3.0.15/var"
sbindir = "/home/adrian/freeradius-server-3.0.15/sbin"
logdir = "/home/adrian/freeradius-server-3.0.15/var/log/radius"
run_dir = "/home/adrian/freeradius-server-3.0.15/var/run/radiusd"
libdir = "/home/adrian/freeradius-server-3.0.15/lib"
radacctdir = "/home/adrian/freeradius-server-3.0.15/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/home/adrian/freeradius-server-3.0.15/var/run/radiusd/radiusd.pid"
checkrad = "/home/adrian/freeradius-server-3.0.15/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
allow_vulnerable_openssl = "CVE-2016-6304"
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server SPS_FR {
ipaddr = 192.168.19.20
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "none"
ping_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
home_server_pool SPS_FR_pool {
home_server = SPS_FR
}
realm passpoint {
auth_pool = SPS_FR_pool
nostrip
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Found debugger attached
# Creating Auth-Type = mschap
# Creating Auth-Type = digest
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_chap
# Loading module "chap" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/chap
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/dynamic_clients
# Loaded module rlm_files
# Loading module "files" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/files
files {
filename = "/home/adrian/freeradius-server-3.0.15/etc/raddb/mods-config/files/authorize"
acctusersfile = "/home/adrian/freeradius-server-3.0.15/etc/raddb/mods-config/files/accounting"
preproxy_usersfile = "/home/adrian/freeradius-server-3.0.15/etc/raddb/mods-config/files/pre-proxy"
}
# Loaded module rlm_radutmp
# Loading module "sradutmp" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/home/adrian/freeradius-server-3.0.15/var/log/radius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_mschap
# Loading module "mschap" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loaded module rlm_soh
# Loading module "soh" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_exec
# Loading module "ntlm_auth" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_always
# Loading module "reject" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_utf8
# Loading module "utf8" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/utf8
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/home/adrian/freeradius-server-3.0.15/etc/raddb/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/home/adrian/freeradius-server-3.0.15/etc/raddb/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/home/adrian/freeradius-server-3.0.15/etc/raddb/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/home/adrian/freeradius-server-3.0.15/etc/raddb/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/home/adrian/freeradius-server-3.0.15/etc/raddb/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loading module "echo" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loaded module rlm_unpack
# Loading module "unpack" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/unpack
# Loaded module rlm_date
# Loading module "date" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/date
date {
format = "%b %e %Y %H:%M:%S %Z"
utc = no
}
# Loaded module rlm_linelog
# Loading module "linelog" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/linelog
linelog {
filename = "/home/adrian/freeradius-server-3.0.15/var/log/radius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/linelog
linelog log_accounting {
filename = "/home/adrian/freeradius-server-3.0.15/var/log/radius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/preprocess
preprocess {
huntgroups = "/home/adrian/freeradius-server-3.0.15/etc/raddb/mods-config/preprocess/huntgroups"
hints = "/home/adrian/freeradius-server-3.0.15/etc/raddb/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_detail
# Loading module "detail" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/detail
detail {
filename = "/home/adrian/freeradius-server-3.0.15/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "exec" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_eap
# Loading module "eap" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loaded module rlm_unix
# Loading module "unix" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/unix
unix {
radwtmp = "/home/adrian/freeradius-server-3.0.15/var/log/radius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_digest
# Loading module "digest" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/digest
# Loading module "auth_log" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/detail.log
detail auth_log {
filename = "/home/adrian/freeradius-server-3.0.15/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/detail.log
detail reply_log {
filename = "/home/adrian/freeradius-server-3.0.15/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/detail.log
detail pre_proxy_log {
filename = "/home/adrian/freeradius-server-3.0.15/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/detail.log
detail post_proxy_log {
filename = "/home/adrian/freeradius-server-3.0.15/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_pap
# Loading module "pap" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_cache
# Loading module "cache_eap" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_dhcp
# Loading module "dhcp" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/dhcp
# Loaded module rlm_expiration
# Loading module "expiration" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/expiration
# Loading module "radutmp" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/radutmp
radutmp {
filename = "/home/adrian/freeradius-server-3.0.15/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_replicate
# Loading module "replicate" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/replicate
# Loaded module rlm_expr
# Loading module "expr" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/expr
expr {
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_logintime
# Loading module "logintime" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
instantiate {
}
# Instantiating module "files" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/files
reading pairlist file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-config/files/authorize
reading pairlist file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-config/files/accounting
reading pairlist file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-config/files/pre-proxy
# Instantiating module "mschap" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "IPASS" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/realm
# Instantiating module "suffix" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/realm
# Instantiating module "realmpercent" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/realm
# Instantiating module "ntdomain" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/realm
# Instantiating module "reject" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
# Instantiating module "fail" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
# Instantiating module "ok" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
# Instantiating module "handled" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
# Instantiating module "invalid" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
# Instantiating module "userlock" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
# Instantiating module "notfound" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
# Instantiating module "noop" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
# Instantiating module "updated" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
# Instantiating module "attr_filter.post-proxy" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/attr_filter
reading pairlist file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/attr_filter
reading pairlist file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/attr_filter
reading pairlist file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-config/attr_filter/access_reject
[/home/adrian/freeradius-server-3.0.15/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/home/adrian/freeradius-server-3.0.15/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
# Instantiating module "attr_filter.access_challenge" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/attr_filter
reading pairlist file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/attr_filter
reading pairlist file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-config/attr_filter/accounting_response
# Instantiating module "etc_passwd" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "linelog" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/linelog
# Instantiating module "log_accounting" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/linelog
# Instantiating module "preprocess" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/preprocess
reading pairlist file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-config/preprocess/hints
# Instantiating module "detail" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/detail
# Instantiating module "eap" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/home/adrian/freeradius-server-3.0.15/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/home/adrian/freeradius-server-3.0.15/etc/raddb/certs/server.pem"
certificate_file = "/home/adrian/freeradius-server-3.0.15/etc/raddb/certs/server.pem"
ca_file = "/home/adrian/freeradius-server-3.0.15/etc/raddb/certs/ca.pem"
private_key_password = <<< secret >>>
dh_file = "/home/adrian/freeradius-server-3.0.15/etc/raddb/certs/dh"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
cipher_server_preference = no
ecdh_curve = "prime256v1"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "auth_log" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
# Instantiating module "reply_log" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/detail.log
# Instantiating module "pap" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/pap
# Instantiating module "cache_eap" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
# Instantiating module "expiration" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/expiration
# Instantiating module "logintime" from file /home/adrian/freeradius-server-3.0.15/etc/raddb/mods-enabled/logintime
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /home/adrian/freeradius-server-3.0.15/etc/raddb/radiusd.conf
} # server
server default { # from file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
server inner-tunnel { # from file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
# Skipping contents of 'if' as it is always 'false' -- /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/inner-tunnel:331
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 34763
Listening on proxy address :: port 31835
Ready to process requests
(0) Received Access-Request Id 0 from 127.0.0.1:51415 to 127.0.0.1:1812 length 146
(0) User-Name = "passpoint/adrian"
(0) NAS-IP-Address = 127.0.0.1
(0) Calling-Station-Id = "02-00-00-00-00-01"
(0) Framed-MTU = 1400
(0) NAS-Port-Type = Wireless-802.11
(0) Service-Type = Framed-User
(0) Connect-Info = "CONNECT 11Mbps 802.11b"
(0) EAP-Message = 0x020000150170617373706f696e742f61647269616e
(0) Message-Authenticator = 0xaf825a0fc55e4c2f2cf81dca248dc550
(0) # Executing section authorize from file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) IPASS: Checking for prefix before "/"
(0) IPASS: Looking up realm "passpoint" for User-Name = "passpoint/adrian"
(0) IPASS: Found realm "passpoint"
(0) IPASS: Adding Realm = "passpoint"
(0) IPASS: Proxying request from user passpoint/adrian to realm passpoint
(0) IPASS: Preparing to proxy authentication request to realm "passpoint"
(0) [IPASS] = updated
(0) if (Realm == 'passpoint' && &EAP-Message ) {
(0) if (Realm == 'passpoint' && &EAP-Message ) -> TRUE
(0) if (Realm == 'passpoint' && &EAP-Message ) {
(0) update control {
(0) Proxy-To-Realm := LOCAL
(0) } # update control = noop
(0) } # if (Realm == 'passpoint' && &EAP-Message ) = noop
(0) ... skipping else: Preceding "if" was taken
(0) eap: Peer sent EAP Response (code 2) ID 0 length 21
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0) [eap] = ok
(0) } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(0) authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 1 length 22
(0) eap: EAP session adding &reply:State = 0x06d22ed906d32a54
(0) [eap] = handled
(0) } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(0) Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:51415 length 0
(0) EAP-Message = 0x0101001604109620ea5941df32dc74eda33830a515a9
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0x06d22ed906d32a54ff0aab134334b819
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 1 from 127.0.0.1:51415 to 127.0.0.1:1812 length 149
(1) User-Name = "passpoint/adrian"
(1) NAS-IP-Address = 127.0.0.1
(1) Calling-Station-Id = "02-00-00-00-00-01"
(1) Framed-MTU = 1400
(1) NAS-Port-Type = Wireless-802.11
(1) Service-Type = Framed-User
(1) Connect-Info = "CONNECT 11Mbps 802.11b"
(1) EAP-Message = 0x020100060315
(1) State = 0x06d22ed906d32a54ff0aab134334b819
(1) Message-Authenticator = 0x18a32045f098493e9c28e768bbfc67e1
(1) session-state: No cached attributes
(1) # Executing section authorize from file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(1) authorize {
(1) policy filter_username {
(1) if (&User-Name) {
(1) if (&User-Name) -> TRUE
(1) if (&User-Name) {
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@[^@]*@/ ) {
(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # if (&User-Name) = notfound
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) IPASS: Checking for prefix before "/"
(1) IPASS: Looking up realm "passpoint" for User-Name = "passpoint/adrian"
(1) IPASS: Found realm "passpoint"
(1) IPASS: Adding Realm = "passpoint"
(1) IPASS: Proxying request from user passpoint/adrian to realm passpoint
(1) IPASS: Preparing to proxy authentication request to realm "passpoint"
(1) [IPASS] = updated
(1) if (Realm == 'passpoint' && &EAP-Message ) {
(1) if (Realm == 'passpoint' && &EAP-Message ) -> TRUE
(1) if (Realm == 'passpoint' && &EAP-Message ) {
(1) update control {
(1) Proxy-To-Realm := LOCAL
(1) } # update control = noop
(1) } # if (Realm == 'passpoint' && &EAP-Message ) = noop
(1) ... skipping else: Preceding "if" was taken
(1) eap: Peer sent EAP Response (code 2) ID 1 length 6
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1) [eap] = updated
(1) [files] = noop
(1) [expiration] = noop
(1) [logintime] = noop
(1) [pap] = noop
(1) } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(1) authenticate {
(1) eap: Expiring EAP session with state 0x06d22ed906d32a54
(1) eap: Finished EAP session with state 0x06d22ed906d32a54
(1) eap: Previous EAP request found for state 0x06d22ed906d32a54, released from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type TTLS (21)
(1) eap: Calling submodule eap_ttls to process data
(1) eap_ttls: Initiating new EAP-TLS session
(1) eap_ttls: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 2 length 6
(1) eap: EAP session adding &reply:State = 0x06d22ed907d03b54
(1) [eap] = handled
(1) } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(1) Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 1 from 127.0.0.1:1812 to 127.0.0.1:51415 length 0
(1) EAP-Message = 0x010200061520
(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0x06d22ed907d03b54ff0aab134334b819
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 2 from 127.0.0.1:51415 to 127.0.0.1:1812 length 436
(2) User-Name = "passpoint/adrian"
(2) NAS-IP-Address = 127.0.0.1
(2) Calling-Station-Id = "02-00-00-00-00-01"
(2) Framed-MTU = 1400
(2) NAS-Port-Type = Wireless-802.11
(2) Service-Type = Framed-User
(2) Connect-Info = "CONNECT 11Mbps 802.11b"
(2) EAP-Message = 0x02020123150016030101180100011403032bfa822e9a2fe791ae2222a70f8af28a40f834ab9d52713f1f9e6bc6fa7bf891000082c030c02cc028c024c014c00a00a3009f006b006a0039003800880087c032c02ec02ac026c00fc005009d003d00350084c012c00800160013c00dc003000ac02fc02bc0
(2) State = 0x06d22ed907d03b54ff0aab134334b819
(2) Message-Authenticator = 0xb5f71990e0859c4a71651d8c8bcd4a9c
(2) session-state: No cached attributes
(2) # Executing section authorize from file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(2) authorize {
(2) policy filter_username {
(2) if (&User-Name) {
(2) if (&User-Name) -> TRUE
(2) if (&User-Name) {
(2) if (&User-Name =~ / /) {
(2) if (&User-Name =~ / /) -> FALSE
(2) if (&User-Name =~ /@[^@]*@/ ) {
(2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(2) if (&User-Name =~ /\.\./ ) {
(2) if (&User-Name =~ /\.\./ ) -> FALSE
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(2) if (&User-Name =~ /\.$/) {
(2) if (&User-Name =~ /\.$/) -> FALSE
(2) if (&User-Name =~ /@\./) {
(2) if (&User-Name =~ /@\./) -> FALSE
(2) } # if (&User-Name) = notfound
(2) } # policy filter_username = notfound
(2) [preprocess] = ok
(2) [chap] = noop
(2) [mschap] = noop
(2) [digest] = noop
(2) IPASS: Checking for prefix before "/"
(2) IPASS: Looking up realm "passpoint" for User-Name = "passpoint/adrian"
(2) IPASS: Found realm "passpoint"
(2) IPASS: Adding Realm = "passpoint"
(2) IPASS: Proxying request from user passpoint/adrian to realm passpoint
(2) IPASS: Preparing to proxy authentication request to realm "passpoint"
(2) [IPASS] = updated
(2) if (Realm == 'passpoint' && &EAP-Message ) {
(2) if (Realm == 'passpoint' && &EAP-Message ) -> TRUE
(2) if (Realm == 'passpoint' && &EAP-Message ) {
(2) update control {
(2) Proxy-To-Realm := LOCAL
(2) } # update control = noop
(2) } # if (Realm == 'passpoint' && &EAP-Message ) = noop
(2) ... skipping else: Preceding "if" was taken
(2) eap: Peer sent EAP Response (code 2) ID 2 length 291
(2) eap: Continuing tunnel setup
(2) [eap] = ok
(2) } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(2) authenticate {
(2) eap: Expiring EAP session with state 0x06d22ed907d03b54
(2) eap: Finished EAP session with state 0x06d22ed907d03b54
(2) eap: Previous EAP request found for state 0x06d22ed907d03b54, released from the list
(2) eap: Peer sent packet with method EAP TTLS (21)
(2) eap: Calling submodule eap_ttls to process data
(2) eap_ttls: Authenticate
(2) eap_ttls: Continuing EAP-TLS
(2) eap_ttls: [eaptls verify] = ok
(2) eap_ttls: Done initial handshake
(2) eap_ttls: (other): before/accept initialization
(2) eap_ttls: TLS_accept: before/accept initialization
(2) eap_ttls: <<< recv TLS 1.2 [length 0118]
(2) eap_ttls: TLS_accept: SSLv3 read client hello A
(2) eap_ttls: >>> send TLS 1.2 [length 003e]
(2) eap_ttls: TLS_accept: SSLv3 write server hello A
(2) eap_ttls: >>> send TLS 1.2 [length 08d3]
(2) eap_ttls: TLS_accept: SSLv3 write certificate A
(2) eap_ttls: >>> send TLS 1.2 [length 014d]
(2) eap_ttls: TLS_accept: SSLv3 write key exchange A
(2) eap_ttls: >>> send TLS 1.2 [length 0004]
(2) eap_ttls: TLS_accept: SSLv3 write server done A
(2) eap_ttls: TLS_accept: SSLv3 flush data
(2) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client certificate A
(2) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client certificate A
(2) eap_ttls: In SSL Handshake Phase
(2) eap_ttls: In SSL Accept mode
(2) eap_ttls: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 3 length 1004
(2) eap: EAP session adding &reply:State = 0x06d22ed904d13b54
(2) [eap] = handled
(2) } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(2) Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 2 from 127.0.0.1:1812 to 127.0.0.1:51415 length 0
(2) EAP-Message = 0x010303ec15c000000a76160303003e0200003a0303d4da874a2a27794f8e9df0aafa9fc02dfa49061bc5ccea84ecd10baa4dbecf3800c030000012ff01000100000b000403000102000f00010116030308d30b0008cf0008cc0003de308203da308202c2a003020102020101300d06092a864886f70d01
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0x06d22ed904d13b54ff0aab134334b819
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 3 from 127.0.0.1:51415 to 127.0.0.1:1812 length 149
(3) User-Name = "passpoint/adrian"
(3) NAS-IP-Address = 127.0.0.1
(3) Calling-Station-Id = "02-00-00-00-00-01"
(3) Framed-MTU = 1400
(3) NAS-Port-Type = Wireless-802.11
(3) Service-Type = Framed-User
(3) Connect-Info = "CONNECT 11Mbps 802.11b"
(3) EAP-Message = 0x020300061500
(3) State = 0x06d22ed904d13b54ff0aab134334b819
(3) Message-Authenticator = 0x147418cdac487df268876f9a65432f33
(3) session-state: No cached attributes
(3) # Executing section authorize from file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(3) authorize {
(3) policy filter_username {
(3) if (&User-Name) {
(3) if (&User-Name) -> TRUE
(3) if (&User-Name) {
(3) if (&User-Name =~ / /) {
(3) if (&User-Name =~ / /) -> FALSE
(3) if (&User-Name =~ /@[^@]*@/ ) {
(3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(3) if (&User-Name =~ /\.\./ ) {
(3) if (&User-Name =~ /\.\./ ) -> FALSE
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(3) if (&User-Name =~ /\.$/) {
(3) if (&User-Name =~ /\.$/) -> FALSE
(3) if (&User-Name =~ /@\./) {
(3) if (&User-Name =~ /@\./) -> FALSE
(3) } # if (&User-Name) = notfound
(3) } # policy filter_username = notfound
(3) [preprocess] = ok
(3) [chap] = noop
(3) [mschap] = noop
(3) [digest] = noop
(3) IPASS: Checking for prefix before "/"
(3) IPASS: Looking up realm "passpoint" for User-Name = "passpoint/adrian"
(3) IPASS: Found realm "passpoint"
(3) IPASS: Adding Realm = "passpoint"
(3) IPASS: Proxying request from user passpoint/adrian to realm passpoint
(3) IPASS: Preparing to proxy authentication request to realm "passpoint"
(3) [IPASS] = updated
(3) if (Realm == 'passpoint' && &EAP-Message ) {
(3) if (Realm == 'passpoint' && &EAP-Message ) -> TRUE
(3) if (Realm == 'passpoint' && &EAP-Message ) {
(3) update control {
(3) Proxy-To-Realm := LOCAL
(3) } # update control = noop
(3) } # if (Realm == 'passpoint' && &EAP-Message ) = noop
(3) ... skipping else: Preceding "if" was taken
(3) eap: Peer sent EAP Response (code 2) ID 3 length 6
(3) eap: Continuing tunnel setup
(3) [eap] = ok
(3) } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(3) authenticate {
(3) eap: Expiring EAP session with state 0x06d22ed904d13b54
(3) eap: Finished EAP session with state 0x06d22ed904d13b54
(3) eap: Previous EAP request found for state 0x06d22ed904d13b54, released from the list
(3) eap: Peer sent packet with method EAP TTLS (21)
(3) eap: Calling submodule eap_ttls to process data
(3) eap_ttls: Authenticate
(3) eap_ttls: Continuing EAP-TLS
(3) eap_ttls: Peer ACKed our handshake fragment
(3) eap_ttls: [eaptls verify] = request
(3) eap_ttls: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 4 length 1004
(3) eap: EAP session adding &reply:State = 0x06d22ed905d63b54
(3) [eap] = handled
(3) } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(3) Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 3 from 127.0.0.1:1812 to 127.0.0.1:51415 length 0
(3) EAP-Message = 0x010403ec15c000000a76c8e930faf3e1dc42289e8f165ba377ab72d3d26e6e1175a70a390c1f38b6a24aafbf547fdcba59bddf242d441fa3be6c75c0658ec78ad5f79e1e69895a4f3c0ca41dc3ea61b6b4e486420cf88d070004e8308204e4308203cca003020102020900bcf05fa41e8faac5300d0609
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0x06d22ed905d63b54ff0aab134334b819
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 4 from 127.0.0.1:51415 to 127.0.0.1:1812 length 149
(4) User-Name = "passpoint/adrian"
(4) NAS-IP-Address = 127.0.0.1
(4) Calling-Station-Id = "02-00-00-00-00-01"
(4) Framed-MTU = 1400
(4) NAS-Port-Type = Wireless-802.11
(4) Service-Type = Framed-User
(4) Connect-Info = "CONNECT 11Mbps 802.11b"
(4) EAP-Message = 0x020400061500
(4) State = 0x06d22ed905d63b54ff0aab134334b819
(4) Message-Authenticator = 0x241d922d6706f95b2d5fbefaf5b04601
(4) session-state: No cached attributes
(4) # Executing section authorize from file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(4) authorize {
(4) policy filter_username {
(4) if (&User-Name) {
(4) if (&User-Name) -> TRUE
(4) if (&User-Name) {
(4) if (&User-Name =~ / /) {
(4) if (&User-Name =~ / /) -> FALSE
(4) if (&User-Name =~ /@[^@]*@/ ) {
(4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(4) if (&User-Name =~ /\.\./ ) {
(4) if (&User-Name =~ /\.\./ ) -> FALSE
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(4) if (&User-Name =~ /\.$/) {
(4) if (&User-Name =~ /\.$/) -> FALSE
(4) if (&User-Name =~ /@\./) {
(4) if (&User-Name =~ /@\./) -> FALSE
(4) } # if (&User-Name) = notfound
(4) } # policy filter_username = notfound
(4) [preprocess] = ok
(4) [chap] = noop
(4) [mschap] = noop
(4) [digest] = noop
(4) IPASS: Checking for prefix before "/"
(4) IPASS: Looking up realm "passpoint" for User-Name = "passpoint/adrian"
(4) IPASS: Found realm "passpoint"
(4) IPASS: Adding Realm = "passpoint"
(4) IPASS: Proxying request from user passpoint/adrian to realm passpoint
(4) IPASS: Preparing to proxy authentication request to realm "passpoint"
(4) [IPASS] = updated
(4) if (Realm == 'passpoint' && &EAP-Message ) {
(4) if (Realm == 'passpoint' && &EAP-Message ) -> TRUE
(4) if (Realm == 'passpoint' && &EAP-Message ) {
(4) update control {
(4) Proxy-To-Realm := LOCAL
(4) } # update control = noop
(4) } # if (Realm == 'passpoint' && &EAP-Message ) = noop
(4) ... skipping else: Preceding "if" was taken
(4) eap: Peer sent EAP Response (code 2) ID 4 length 6
(4) eap: Continuing tunnel setup
(4) [eap] = ok
(4) } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(4) authenticate {
(4) eap: Expiring EAP session with state 0x06d22ed905d63b54
(4) eap: Finished EAP session with state 0x06d22ed905d63b54
(4) eap: Previous EAP request found for state 0x06d22ed905d63b54, released from the list
(4) eap: Peer sent packet with method EAP TTLS (21)
(4) eap: Calling submodule eap_ttls to process data
(4) eap_ttls: Authenticate
(4) eap_ttls: Continuing EAP-TLS
(4) eap_ttls: Peer ACKed our handshake fragment
(4) eap_ttls: [eaptls verify] = request
(4) eap_ttls: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 5 length 700
(4) eap: EAP session adding &reply:State = 0x06d22ed902d73b54
(4) [eap] = handled
(4) } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(4) Challenge { ... } # empty sub-section is ignored
(4) Sent Access-Challenge Id 4 from 127.0.0.1:1812 to 127.0.0.1:51415 length 0
(4) EAP-Message = 0x010502bc158000000a76130101ff040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b050003820101007e12cc5d0852785138e87ccd70551d030a1654aa0dba
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0x06d22ed902d73b54ff0aab134334b819
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 5 from 127.0.0.1:51415 to 127.0.0.1:1812 length 275
(5) User-Name = "passpoint/adrian"
(5) NAS-IP-Address = 127.0.0.1
(5) Calling-Station-Id = "02-00-00-00-00-01"
(5) Framed-MTU = 1400
(5) NAS-Port-Type = Wireless-802.11
(5) Service-Type = Framed-User
(5) Connect-Info = "CONNECT 11Mbps 802.11b"
(5) EAP-Message = 0x02050084150016030300461000004241047eda1008fb6d36249fe3ab815533a8bcf84fcf7d470ab3e05628e06b259837b7478acd5dbdea89f8f2510797e193f20e467b8e2b0fa909cbfabc12ac3aff9de314030300010116030300285022e6beb62ea416ebf7bc1068b35c10c5d240c3e4670c101ea121
(5) State = 0x06d22ed902d73b54ff0aab134334b819
(5) Message-Authenticator = 0x556ca6655672dfc0a4f5527ddbb271be
(5) session-state: No cached attributes
(5) # Executing section authorize from file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(5) authorize {
(5) policy filter_username {
(5) if (&User-Name) {
(5) if (&User-Name) -> TRUE
(5) if (&User-Name) {
(5) if (&User-Name =~ / /) {
(5) if (&User-Name =~ / /) -> FALSE
(5) if (&User-Name =~ /@[^@]*@/ ) {
(5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(5) if (&User-Name =~ /\.\./ ) {
(5) if (&User-Name =~ /\.\./ ) -> FALSE
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(5) if (&User-Name =~ /\.$/) {
(5) if (&User-Name =~ /\.$/) -> FALSE
(5) if (&User-Name =~ /@\./) {
(5) if (&User-Name =~ /@\./) -> FALSE
(5) } # if (&User-Name) = notfound
(5) } # policy filter_username = notfound
(5) [preprocess] = ok
(5) [chap] = noop
(5) [mschap] = noop
(5) [digest] = noop
(5) IPASS: Checking for prefix before "/"
(5) IPASS: Looking up realm "passpoint" for User-Name = "passpoint/adrian"
(5) IPASS: Found realm "passpoint"
(5) IPASS: Adding Realm = "passpoint"
(5) IPASS: Proxying request from user passpoint/adrian to realm passpoint
(5) IPASS: Preparing to proxy authentication request to realm "passpoint"
(5) [IPASS] = updated
(5) if (Realm == 'passpoint' && &EAP-Message ) {
(5) if (Realm == 'passpoint' && &EAP-Message ) -> TRUE
(5) if (Realm == 'passpoint' && &EAP-Message ) {
(5) update control {
(5) Proxy-To-Realm := LOCAL
(5) } # update control = noop
(5) } # if (Realm == 'passpoint' && &EAP-Message ) = noop
(5) ... skipping else: Preceding "if" was taken
(5) eap: Peer sent EAP Response (code 2) ID 5 length 132
(5) eap: Continuing tunnel setup
(5) [eap] = ok
(5) } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(5) authenticate {
(5) eap: Expiring EAP session with state 0x06d22ed902d73b54
(5) eap: Finished EAP session with state 0x06d22ed902d73b54
(5) eap: Previous EAP request found for state 0x06d22ed902d73b54, released from the list
(5) eap: Peer sent packet with method EAP TTLS (21)
(5) eap: Calling submodule eap_ttls to process data
(5) eap_ttls: Authenticate
(5) eap_ttls: Continuing EAP-TLS
(5) eap_ttls: [eaptls verify] = ok
(5) eap_ttls: Done initial handshake
(5) eap_ttls: <<< recv TLS 1.2 [length 0046]
(5) eap_ttls: TLS_accept: SSLv3 read client key exchange A
(5) eap_ttls: <<< recv TLS 1.2 [length 0001]
(5) eap_ttls: <<< recv TLS 1.2 [length 0010]
(5) eap_ttls: TLS_accept: SSLv3 read finished A
(5) eap_ttls: >>> send TLS 1.2 [length 0001]
(5) eap_ttls: TLS_accept: SSLv3 write change cipher spec A
(5) eap_ttls: >>> send TLS 1.2 [length 0010]
(5) eap_ttls: TLS_accept: SSLv3 write finished A
(5) eap_ttls: TLS_accept: SSLv3 flush data
(5) eap_ttls: (other): SSL negotiation finished successfully
(5) eap_ttls: SSL Connection Established
(5) eap_ttls: [eaptls process] = handled
(5) eap: Sending EAP Request (code 1) ID 6 length 61
(5) eap: EAP session adding &reply:State = 0x06d22ed903d43b54
(5) [eap] = handled
(5) } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(5) Challenge { ... } # empty sub-section is ignored
(5) Sent Access-Challenge Id 5 from 127.0.0.1:1812 to 127.0.0.1:51415 length 0
(5) EAP-Message = 0x0106003d15800000003314030300010116030300289fdcadc3caad3c2be5b7b685f625c28c043c8c72a568e5f589f770482f4f492a13b05a2e1b40ae8c
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0x06d22ed903d43b54ff0aab134334b819
(5) Finished request
Waking up in 4.9 seconds.
(6) Received Access-Request Id 6 from 127.0.0.1:51415 to 127.0.0.1:1812 length 226
(6) User-Name = "passpoint/adrian"
(6) NAS-IP-Address = 127.0.0.1
(6) Calling-Station-Id = "02-00-00-00-00-01"
(6) Framed-MTU = 1400
(6) NAS-Port-Type = Wireless-802.11
(6) Service-Type = Framed-User
(6) Connect-Info = "CONNECT 11Mbps 802.11b"
(6) EAP-Message = 0x02060053150017030300485022e6beb62ea417c4436e868dbbd34749581c8f2cb3dd849b1ceb96899c051a9dbcc22798964a9f4b410e5dfaf5faf4a4190a411d82df27af5aa6d89d670d7c31cc4a1d34fd5a7b
(6) State = 0x06d22ed903d43b54ff0aab134334b819
(6) Message-Authenticator = 0x1d01454f6cc5f4e010ae1f40fb59d3df
(6) session-state: No cached attributes
(6) # Executing section authorize from file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) [preprocess] = ok
(6) [chap] = noop
(6) [mschap] = noop
(6) [digest] = noop
(6) IPASS: Checking for prefix before "/"
(6) IPASS: Looking up realm "passpoint" for User-Name = "passpoint/adrian"
(6) IPASS: Found realm "passpoint"
(6) IPASS: Adding Realm = "passpoint"
(6) IPASS: Proxying request from user passpoint/adrian to realm passpoint
(6) IPASS: Preparing to proxy authentication request to realm "passpoint"
(6) [IPASS] = updated
(6) if (Realm == 'passpoint' && &EAP-Message ) {
(6) if (Realm == 'passpoint' && &EAP-Message ) -> TRUE
(6) if (Realm == 'passpoint' && &EAP-Message ) {
(6) update control {
(6) Proxy-To-Realm := LOCAL
(6) } # update control = noop
(6) } # if (Realm == 'passpoint' && &EAP-Message ) = noop
(6) ... skipping else: Preceding "if" was taken
(6) eap: Peer sent EAP Response (code 2) ID 6 length 83
(6) eap: Continuing tunnel setup
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(6) authenticate {
(6) eap: Expiring EAP session with state 0x06d22ed903d43b54
(6) eap: Finished EAP session with state 0x06d22ed903d43b54
(6) eap: Previous EAP request found for state 0x06d22ed903d43b54, released from the list
(6) eap: Peer sent packet with method EAP TTLS (21)
(6) eap: Calling submodule eap_ttls to process data
(6) eap_ttls: Authenticate
(6) eap_ttls: Continuing EAP-TLS
(6) eap_ttls: [eaptls verify] = ok
(6) eap_ttls: Done initial handshake
(6) eap_ttls: [eaptls process] = ok
(6) eap_ttls: Session established. Proceeding to decode tunneled attributes
(6) eap_ttls: Got tunneled request
(6) eap_ttls: User-Name = "passpoint/adrian"
(6) eap_ttls: User-Password = "hello"
(6) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1
(6) eap_ttls: Sending tunneled request
(6) Virtual server inner-tunnel received request
(6) User-Name = "passpoint/adrian"
(6) User-Password = "hello"
(6) FreeRADIUS-Proxied-To = 127.0.0.1
(6) WARNING: Outer and inner identities are the same. User privacy is compromised.
(6) server inner-tunnel {
(6) # Executing section authorize from file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/inner-tunnel
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) [chap] = noop
(6) [mschap] = noop
(6) IPASS: Checking for prefix before "/"
(6) IPASS: Looking up realm "passpoint" for User-Name = "passpoint/adrian"
(6) IPASS: Found realm "passpoint"
(6) IPASS: Adding Realm = "passpoint"
(6) IPASS: Proxying request from user passpoint/adrian to realm passpoint
(6) IPASS: Preparing to proxy authentication request to realm "passpoint"
(6) [IPASS] = updated
(6) suffix: Request already has destination realm set. Ignoring
(6) [suffix] = noop
(6) eap: No EAP-Message, not doing EAP
(6) [eap] = noop
(6) [files] = noop
(6) [expiration] = noop
(6) [logintime] = noop
(6) [pap] = noop
(6) } # authorize = updated
(6) } # server inner-tunnel
(6) Virtual server sending reply
(6) eap_ttls: Tunneled authentication will be proxied to passpoint
(6) eap: WARNING: Tunneled session will be proxied. Not doing EAP
(6) [eap] = handled
(6) } # authenticate = handled
(6) WARNING: Cancelling proxy as no home pool exists
(6) There was no response configured: rejecting request
(6) Using Post-Auth-Type Reject
(6) # Executing group from file /home/adrian/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(6) Post-Auth-Type REJECT {
(6) attr_filter.access_reject: EXPAND %{User-Name}
(6) attr_filter.access_reject: --> passpoint/adrian
(6) attr_filter.access_reject: Matched entry DEFAULT at line 11
(6) [attr_filter.access_reject] = updated
(6) eap: ERROR: rlm_eap (EAP): No EAP session matching state 0x06d22ed903d43b54
(6) eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request
(6) eap: Failed to get handler, probably already removed, not inserting EAP-Failure
(6) [eap] = noop
(6) policy remove_reply_message_if_eap {
(6) if (&reply:EAP-Message && &reply:Reply-Message) {
(6) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(6) else {
(6) [noop] = noop
(6) } # else = noop
(6) } # policy remove_reply_message_if_eap = noop
(6) } # Post-Auth-Type REJECT = updated
(6) Sent Access-Reject Id 6 from 127.0.0.1:1812 to 127.0.0.1:51415 length 0
(6) Finished request
Waking up in 4.9 seconds.
The offending line appears to be:
(6) WARNING: Cancelling proxy as no home pool exists
Any ideas appreciated.
Regards,
Adrian Smith
BT Group
-----Original Message-----
From: Freeradius-Users [mailto:freeradius-users-bounces+adrian.p.smith=bt.com at lists.freeradius.org] On Behalf Of Matthew Newton
Sent: 13 June 2017 14:04
To: FreeRadius users mailing list
Subject: Re: Terminate EAP-TTLS then proxy
On Tue, Jun 13, 2017 at 12:57:25PM +0000, adrian.p.smith at bt.com wrote:
> Was kind of expecting that (and at the same time hoping not to hear
> it!).
>
> I have tried 2.2.9 and I get the same.
>
> Probably time to upgrade - been resisting as we have a lot of baggage
> and an old OS.
I'd start with 3.0.14 and just a minimal config to replicate the bit that's broken. Then you can at least prove that part works before doing anything else.
--
Matthew
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list